Give topology clients more access to the topology data by passing index,
pcm, link_config and dai_driver to clients. This allows clients to fully
instantiate and track topology objects.

The SOF driver is the first user of these new APIs and needs them to build
component topology driver and FW objects.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Machine drivers statically define a number of DAI links that currently
cannot be changed or removed by topology. This means PCMs and platform
components cannot be changed by topology at runtime AND machine drivers
are tightly coupled to topology.

This patch allows topology to override the machine driver DAI link config
in order to reuse machine drivers with different topologies and platform
components. The patch supports :-

1) create new FE PCMs with a topology defined PCM ID.
2) destroy existing static FE PCMs
3) change the platform component driver.
4) assign any new HW params fixups.

The patch requires no changes to the machine drivers, but does add some
platform component flags that the platform component driver can assign
before loading topologies.
Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

The SAR ADC of key press detection varies depending on headset.
We can't make a set of common threshold values for every case.
Therefore, the driver provides configuration for user and
they can set up values by UCM configuration.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

fixed checkpatch pl warnings.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

By default all the streams are mapped to all links after controller is
reset which causes stream to be broadcast on all the links.

This patch resets the stream-link mapping after controller reset. The
stream is mapped later to the appropriate link as part of stream setup.
Tested-by: Abhijeet Kumar <abhijeet.kumar@intel.com>
Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

An application can choose to call .prepare function
any number of times. In such scenarios, there is a
need to reset the DSP pipeline.
Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: Divya Prakash <divya1.prakash@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

SKL and KBL driver used separate set of fw ops for library loading.
However, with the unification of fw binary, use the common set of fw
ops for both
Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Currently during destroy pipeline the gateway is disabled
before DMA completion. This leads to improper draining of
data and subsequently causing issues on HD-Audio DMA.
Hence added a new pipe reset IPC in skl_pcm_hw_free in
which the Gateway Enable(GEN bit) is reset to 0 after
DMA completion in skl_pcm_trigger.
Signed-off-by: Divya Prakash <divya1.prakash@intel.com>
Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/rt1305.c:1174:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

Fixes: 29bc643d ("ASoC: rt1305: Add RT1305/RT1306 amplifier driver")
CC: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This patch added <linux/acpi.h> header
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This improves the coding style of this piece of code.
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

This is the initial codec driver for rt5668b.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

This is the initial amplifier driver for rt1305/rt1306.
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Fixes the following sparse warning:

sound/soc/amd/acp-da7219-max98357a.c:46:12: warning:
 symbol 'da7219_dai_clk' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current comment makes not clear the direction of mclk. Previously, similar
description caused a misunderstanding for bclk_master and fsync_master.

This commit solves the potential confusion the same way it is solved for
bclk_master and fsync_master.
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

Clock gating parameter is a part of `dai_fmt`. It is supported by
`alsa-lib` when creating a topology binary file, but ignored by kernel
when loading this topology file.

After applying this commit, the clock gating parameter is not ignored any
more. This solution is backwards compatible. The existing behaviour is
not broken, because by default the parameter value is 0 and is ignored.

snd_soc_tplg_hw_config.clock_gated = 0 => no effect
snd_soc_tplg_hw_config.clock_gated = 1 => SND_SOC_DAIFMT_GATED
snd_soc_tplg_hw_config.clock_gated = 2 => SND_SOC_DAIFMT_CONT

For example, the following config, based on
alsa-lib/src/conf/topology/broadwell/broadwell.conf, is now supported:

~~~~
SectionHWConfig."CodecHWConfig" {
        id "1"
        format "I2S"            # physical audio format.
        pm_gate_clocks "true"   # clock can be gated
}

SectionLink."Codec" {

        # used for binding to the physical link
        id "0"

        hw_configs [
                "CodecHWConfig"
        ]

        default_hw_conf_id "1"
}
~~~~
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Pan Xiuli <xiuli.pan@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

The values of bclk and fsync are inverted WRT the codec. But the existing
solution already works for Broadwell, see the alsa-lib config:

`alsa-lib/src/conf/topology/broadwell/broadwell.conf`

This commit provides the backwards-compatible solution to fix this misuse.
Signed-off-by: Kirill Marinushkin <k.marinushkin@gmail.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>

The freq parameter indicates the physical frequency of an actual
input clock or a desired frequency of an output clock for HCKT/R.
It should never be passed 0. This might cause Division-by-zero.

So this patch adds a check to fix it.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Reloading fw causes an audiable popping sound, we can avoid this
by not reloading if the samplerate is the same as before.
Signed-off-by: Danny Smith <dannys@axis.com>
Signed-off-by: Robert Rosengren <robert.rosengren@axis.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

further patches can be applied.

It is waiting udelay(50) x 1024 (= 50ms) for status check
in worst case, but it is overkill.
And we shouldn't use udelay() for 50us
(linux/Documentation/timers/timers-howto.txt)

Waiting maximum udelay(5) x 1024 (= 5ms) is very enough
for status check.
This patch fixes these issue.
Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

commit 4821d914 ("ASoC: rsnd: use dma_sync_single_for_xxx() for
IOMMU") (= v1) which have been already reverted had supported IPMMU
support on rsnd driver.
Because memory allocating timing and DMAEngine access timing were
different, it used continuous memory and called dma map function by
itself.

OTOH, it is using DMA descriptor mode (= DMA cyclic mode), thus, there
was timing conflict between DMA sync/unsync and DMA transfer starting,
and it maked sound noise.

This patch supports IPMMU with coherent memory, and, it uses Audio DMAC
dev for allocating memory by snd_pcm_lib_preallocate_pages_for_all() to
indicate memory area to IPMMU.
One note is that Playback/Capture need each paired Audio DMAC dev.
Because of this, we need to keep each paired Audio DMAC dev when probing,
and use it when allocating each memory for IPMMU.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

It's less overhead, clearer and generally neater.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

Adds headset button support.

TEST=Tested Volume UP/Down, Play/Pause functionality
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>

It's less overhead, clearer and generally neater.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

Current ssi.c is assuming below 2 things to probing HDMI node.
1) remote node is including "hdmi0" or "hdmi1" in node name
2) remote_ep->full_name is including full path name

But, these assumptions are broken by below
1) Node names should not use numerical suffixes
 commit 6b5ac2f1 ("arm64: dts: renesas: r8a7795: Drop bogus HDMI
                       node names suffixes")
2) node full_name no longer include full path name
 commit a7e4cfb0 ("of/fdt: only store the device node basename
                       in full_name")

Because of these reasons, ssi.c can't probe HDMI on current kernel.
This patch probes HDMI0/1 by using its address.
Note is that we need to keep updating for this address for future
generation chip.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

rsnd driver is supporting Gen3. The difference between Gen1 and Gen2
were very big, but, between Gen2 and Gen3 are not so much.
Thus, it is assuming Gen2 and Gen3 have compatible, therefore,
there is no RSND_GEN3 and rsnd_is_gen3() macro.
But in the future, it will need Gen2 and Gen3 different operation,
and for Gen4.
This patch adds missing RSND_GEN3 and rsnd_is_gen3() macro.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Use the new probe style for i2c drivers.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

Long lines and bad alignment disturbs the reading pleasure.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

Long lines and bad alignment disturbs the reading pleasure.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Mark Brown <broonie@kernel.org>

The TSCS42xx relies on set_sysclk to get a unique clock id and rate,
which prevents it from being used with the simple-card.

Remove set_sysclk callback
Add CCF support to get clock id and rate
Add clocks and clock-names to device tree binding
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Remove blrcm from private data
Remove dev from private data
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

Shorten lines greater than 80 chars
Add const to struct snd_soc_component_driver
Signed-off-by: Steven Eckhoff <steven.eckhoff.opensource@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

rsnd_cmd_mod_get() is used from cmd.c only.
Let's makes it static function
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

skylake_audio_probe() is never called in atomic context.
This function is only set as ".probe" in "struct platform_driver".

Despite never getting called from atomic context,
skylake_audio_probe() calls devm_kzalloc() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

skylake_audio_probe() is never called in atomic context.
This function is only set as ".probe" in "struct platform_driver".

Despite never getting called from atomic context,
skylake_audio_probe() calls devm_kzalloc() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

skylake_audio_probe() is never called in atomic context.
This function is only set as ".probe" in "struct platform_driver".

Despite never getting called from atomic context,
skylake_audio_probe() calls devm_kzalloc() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

snd_cht_mc_probe() is never called in atomic context.
This function is only set as ".probe" in "struct platform_driver".

Despite never getting called from atomic context,
snd_cht_mc_probe() calls devm_kzalloc() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

snd_cht_mc_probe() is never called in atomic context.
This function is only set as ".probe" in "struct platform_driver".

Despite never getting called from atomic context,
snd_cht_mc_probe() calls devm_kzalloc() with GFP_ATOMIC,
which waits busily for allocation.
GFP_ATOMIC is not necessary and can be replaced with GFP_KERNEL,
to avoid busy waiting and improve the possibility of sucessful allocation.

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>