- 12 Jul, 2017 29 commits
-
-
Peter Griffin authored
lx-fdtdump dumps the flattened device tree passed to the kernel from the bootloader to the filename specified as the command argument. If no argument is provided it defaults to fdtdump.dtb. This then allows further post processing on the machine running GDB. The fdt header is also also printed in the GDB console. For example: (gdb) lx-fdtdump fdt_magic: 0xD00DFEED fdt_totalsize: 0xC108 off_dt_struct: 0x38 off_dt_strings: 0x3804 off_mem_rsvmap: 0x28 version: 17 last_comp_version: 16 Dumped fdt to fdtdump.dtb >fdtdump fdtdump.dtb | less This command is useful as the bootloader can often re-write parts of the device tree, and this can sometimes cause the kernel to not boot. Link: http://lkml.kernel.org/r/1481280065-5336-2-git-send-email-kbingham@kernel.orgSigned-off-by:
Peter Griffin <peter.griffin@linaro.org> Signed-off-by:
Kieran Bingham <kbingham@kernel.org> Cc: Jason Wessel <jason.wessel@windriver.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Davidlohr Bueso authored
As of commit bf3eac84 ("percpu-rwsem: kill CONFIG_PERCPU_RWSEM") we unconditionally build pcpu-rwsems. Remove a leftover in for FILE_LOCKING. Link: http://lkml.kernel.org/r/20170518180115.2794-1-dave@stgolabs.netSigned-off-by:
Davidlohr Bueso <dbueso@suse.de> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Rakesh Pandit authored
Mount fails if file system image has empty files because of sanity check while reading superblock. For empty files disk offset to end of file (i_eoffset) is cpu_to_le32(-1). Sanity check comparison, which compares disk offset with file system size isn't valid for this value and hence is ignored with this patch. Steps to reproduce: $ dd if=/dev/zero of=bfs-image count=204800 $ mkfs.bfs bfs-image $ mkdir bfs-mount-point $ sudo mount -t bfs -o loop bfs-image bfs-mount-point/ $ cd bfs-mount-point/ $ sudo touch a $ cd .. $ sudo umount bfs-mount-point/ $ sudo mount -t bfs -o loop bfs-image bfs-mount-point/ mount: /dev/loop0: can't read superblock $ dmesg [25526.689580] BFS-fs: bfs_fill_super(): Inode 0x00000003 corrupted Tigran said: "If you had created the filesystem with the proper mkfs under SCO UnixWare 7 you (probably) wouldn't encounter this issue. But since commercial Unix-es are now part of history and the only proper way is the Linux mkfs.bfs utility, your patch is fine" Link: http://lkml.kernel.org/r/20170505201625.GA3097@hercules.tuxera.comSigned-off-by:
Rakesh Pandit <rakesh@tuxera.com> Acked-by:
Tigran Aivazian <aivazian.tigran@gmail.com> Signed-off-by:
-
Kees Cook authored
The add_device_randomness() function would ignore incoming bytes if the crng wasn't ready. This additionally makes sure to make an early enough call to add_latent_entropy() to influence the initial stack canary, which is especially important on non-x86 systems where it stays the same through the life of the boot. Link: http://lkml.kernel.org/r/20170626233038.GA48751@beastSigned-off-by:
Kees Cook <keescook@chromium.org> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jessica Yu <jeyu@redhat.com> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tejun Heo <tj@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by:
-
Mateusz Jurczyk authored
Prevent use of uninitialized memory (originating from the stack frame of do_sysctl()) by verifying that the name array is filled with sufficient input data before comparing its specific entries with integer constants. Through timing measurement or analyzing the kernel debug logs, a user-mode program could potentially infer the results of comparisons against the uninitialized memory, and acquire some (very limited) information about the state of the kernel stack. The change also eliminates possible future warnings by tools such as KMSAN and other code checkers / instrumentations. Link: http://lkml.kernel.org/r/20170524122139.21333-1-mjurczyk@google.comSigned-off-by:
Mateusz Jurczyk <mjurczyk@google.com> Acked-by:
-
Luis R. Rodriguez authored
Add a few initial respective tests for an array: o Echoing values separated by spaces works o Echoing only first elements will set first elements o Confirm PAGE_SIZE limit still applies even if an array is used Link: http://lkml.kernel.org/r/20170630224431.17374-7-mcgrof@kernel.orgSigned-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Luis R. Rodriguez authored
Test against a simple proc_douintvec() case. While at it, add a test against UINT_MAX. Make sure UINT_MAX works, and UINT_MAX+1 will fail and that negative values are not accepted. Link: http://lkml.kernel.org/r/20170630224431.17374-6-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
Test against a simple proc_dointvec() case. While at it, add a test against INT_MAX. Make sure INT_MAX works, and INT_MAX+1 will fail. Also test negative values work. Link: http://lkml.kernel.org/r/20170630224431.17374-5-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
Add the following tests to ensure we do not regress: o Test using a buffer full of space (PAGE_SIZE-1) followed by a single digit works o Test using a buffer full of spaces (PAGE_SIZE or over) will fail As tests increase instead of unloading the module and reloading it we can just do a shell reset_vals() with a reset to values we know are set at init on the driver. Link: http://lkml.kernel.org/r/20170630224431.17374-4-mcgrof@kernel.orgSigned-off-by: -
Luis R. Rodriguez authored
This adds a generic script to let us more easily add more tests cases. Since we really have only two types of tests cases just fold them into the one file. Each test unit is now identified into its separate function: # ./sysctl.sh -l Test ID list: TEST_ID x NUM_TEST TEST_ID: Test ID NUM_TESTS: Number of recommended times to run the test 0001 x 1 - tests proc_dointvec_minmax() 0002 x 1 - tests proc_dostring() For now we start off with what we had before, and run only each test once. We can now watch a test case until it fails: ./sysctl.sh -w 0002 We can also run a test case x number of times, say we want to run a test case 100 times: ./sysctl.sh -c 0001 100 To run a test case only once, for example: ./sysctl.sh -s 0002 The default settings are specified at the top of sysctl.sh. Link: http://lkml.kernel.org/r/20170630224431.17374-3-mcgrof@kernel.orgSigned-off-by: -
Luis R. Rodriguez authored
The existing tools/testing/selftests/sysctl/ tests include two test cases, but these use existing production kernel sysctl interfaces. We want to expand test coverage but we can't just be looking for random safe production values to poke at, that's just insane! Instead just dedicate a test driver for debugging purposes and port the existing scripts to use it. This will make it easier for further tests to be added. Subsequent patches will extend our test coverage for sysctl. The stress test driver uses a new license (GPL on Linux, copyleft-next outside of Linux). Linus was fine with this [0] and later due to Ted's and Alans's request ironed out an "or" language clause to use [1] which is already present upstream. [0] https://lkml.kernel.org/r/CA+55aFyhxcvD+q7tp+-yrSFDKfR0mOHgyEAe=f_94aKLsOu0Og@mail.gmail.com [1] https://lkml.kernel.org/r/1495234558.7848.122.camel@linux.intel.com Link: http://lkml.kernel.org/r/20170630224431.17374-2-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
To keep parity with regular int interfaces provide the an unsigned int proc_douintvec_minmax() which allows you to specify a range of allowed valid numbers. Adding proc_douintvec_minmax_sysadmin() is easy but we can wait for an actual user for that. Link: http://lkml.kernel.org/r/20170519033554.18592-6-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
Commit e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields") added proc_douintvec() to start help adding support for unsigned int, this however was only half the work needed. Two fixes have come in since then for the following issues: o Printing the values shows a negative value, this happens since do_proc_dointvec() and this uses proc_put_long() This was fixed by commit 5380e564 ("sysctl: don't print negative flag for proc_douintvec"). o We can easily wrap around the int values: UINT_MAX is 4294967295, if we echo in 4294967295 + 1 we end up with 0, using 4294967295 + 2 we end up with 1. o We echo negative values in and they are accepted This was fixed by commit 425fffd8 ("sysctl: report EINVAL if value is larger than UINT_MAX for proc_douintvec"). It still also failed to be added to sysctl_check_table()... instead of adding it with the current implementation just provide a proper and simplified unsigned int support without any array unsigned int support with no negative support at all. Historically sysctl proc helpers have supported arrays, due to the complexity this adds though we've taken a step back to evaluate array users to determine if its worth upkeeping for unsigned int. An evaluation using Coccinelle has been done to perform a grammatical search to ask ourselves: o How many sysctl proc_dointvec() (int) users exist which likely should be moved over to proc_douintvec() (unsigned int) ? Answer: about 8 - Of these how many are array users ? Answer: Probably only 1 o How many sysctl array users exist ? Answer: about 12 This last question gives us an idea just how popular arrays: they are not. Array support should probably just be kept for strings. The identified uint ports are: drivers/infiniband/core/ucma.c - max_backlog drivers/infiniband/core/iwcm.c - default_backlog net/core/sysctl_net_core.c - rps_sock_flow_sysctl() net/netfilter/nf_conntrack_timestamp.c - nf_conntrack_timestamp -- bool net/netfilter/nf_conntrack_acct.c nf_conntrack_acct -- bool net/netfilter/nf_conntrack_ecache.c - nf_conntrack_events -- bool net/netfilter/nf_conntrack_helper.c - nf_conntrack_helper -- bool net/phonet/sysctl.c proc_local_port_range() The only possible array users is proc_local_port_range() but it does not seem worth it to add array support just for this given the range support works just as well. Unsigned int support should be desirable more for when you *need* more than INT_MAX or using int min/max support then does not suffice for your ranges. If you forget and by mistake happen to register an unsigned int proc entry with an array, the driver will fail and you will get something as follows: sysctl table check failed: debug/test_sysctl//uint_0002 array now allowed CPU: 2 PID: 1342 Comm: modprobe Tainted: G W E <etc> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS <etc> Call Trace: dump_stack+0x63/0x81 __register_sysctl_table+0x350/0x650 ? kmem_cache_alloc_trace+0x107/0x240 __register_sysctl_paths+0x1b3/0x1e0 ? 0xffffffffc005f000 register_sysctl_table+0x1f/0x30 test_sysctl_init+0x10/0x1000 [test_sysctl] do_one_initcall+0x52/0x1a0 ? kmem_cache_alloc_trace+0x107/0x240 do_init_module+0x5f/0x200 load_module+0x1867/0x1bd0 ? __symbol_put+0x60/0x60 SYSC_finit_module+0xdf/0x110 SyS_finit_module+0xe/0x10 entry_SYSCALL_64_fastpath+0x1e/0xad RIP: 0033:0x7f042b22d119 <etc> Fixes: e7d316a0 ("sysctl: handle error writing UINT_MAX to u32 fields") Link: http://lkml.kernel.org/r/20170519033554.18592-5-mcgrof@kernel.orgSigned-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Liping Zhang <zlpnobody@gmail.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Kees Cook <keescook@chromium.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Luis R. Rodriguez authored
The mode sysctl_writes_strict positional checks keep being copy and pasted as we add new proc handlers. Just add a helper to avoid code duplication. Link: http://lkml.kernel.org/r/20170519033554.18592-4-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
Document the different sysctl_writes_strict modes in code. Link: http://lkml.kernel.org/r/20170519033554.18592-3-mcgrof@kernel.orgSigned-off-by:
-
Luis R. Rodriguez authored
Patch series "sysctl: few fixes", v5. I've been working on making kmod more deterministic, and as I did that I couldn't help but notice a few issues with sysctl. My end goal was just to fix unsigned int support, which back then was completely broken. Liping Zhang has sent up small atomic fixes, however it still missed yet one more fix and Alexey Dobriyan had also suggested to just drop array support given its complexity. I have inspected array support using Coccinelle and indeed its not that popular, so if in fact we can avoid it for new interfaces, I agree its best. I did develop a sysctl stress driver but will hold that off for another series. This patch (of 5): Commit 7c60c48f ("sysctl: Improve the sysctl sanity checks") improved sanity checks considerbly, however the enhancements on sysctl_check_table() meant adding a functional change so that only the last table entry's sanity error is propagated. It also changed the way errors were propagated so that each new check reset the err value, this means only last sanity check computed is used for an error. This has been in the kernel since v3.4 days. Fix this by carrying on errors from previous checks and iterations as we traverse the table and ensuring we keep any error from previous checks. We keep iterating on the table even if an error is found so we can complain for all errors found in one shot. This works as -EINVAL is always returned on error anyway, and the check for error is any non-zero value. Fixes: 7c60c48f ("sysctl: Improve the sysctl sanity checks") Link: http://lkml.kernel.org/r/20170519033554.18592-2-mcgrof@kernel.orgSigned-off-by:
-
Bharat Bhushan authored
Minor updates in Documentation for arm64 as relocatable kernel. Also this patch updates documentation for using uncompressed image "Image" which is used for ARM64. Link: http://lkml.kernel.org/r/1495104793-6563-1-git-send-email-Bharat.Bhushan@nxp.comSigned-off-by:
Bharat Bhushan <Bharat.Bhushan@nxp.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Pratyush Anand <panand@redhat.com> Signed-off-by:
-
Xunlei Pang authored
Currently vmcoreinfo data is updated at boot time subsys_initcall(), it has the risk of being modified by some wrong code during system is running. As a result, vmcore dumped may contain the wrong vmcoreinfo. Later on, when using "crash", "makedumpfile", etc utility to parse this vmcore, we probably will get "Segmentation fault" or other unexpected errors. E.g. 1) wrong code overwrites vmcoreinfo_data; 2) further crashes the system; 3) trigger kdump, then we obviously will fail to recognize the crash context correctly due to the corrupted vmcoreinfo. Now except for vmcoreinfo, all the crash data is well protected(including the cpu note which is fully updated in the crash path, thus its correctness is guaranteed). Given that vmcoreinfo data is a large chunk prepared for kdump, we better protect it as well. To solve this, we relocate and copy vmcoreinfo_data to the crash memory when kdump is loading via kexec syscalls. Because the whole crash memory will be protected by existing arch_kexec_protect_crashkres() mechanism, we naturally protect vmcoreinfo_data from write(even read) access under kernel direct mapping after kdump is loaded. Since kdump is usually loaded at the very early stage after boot, we can trust the correctness of the vmcoreinfo data copied. On the other hand, we still need to operate the vmcoreinfo safe copy when crash happens to generate vmcoreinfo_note again, we rely on vmap() to map out a new kernel virtual address and update to use this new one instead in the following crash_save_vmcoreinfo(). BTW, we do not touch vmcoreinfo_note, because it will be fully updated using the protected vmcoreinfo_data after crash which is surely correct just like the cpu crash note. Link: http://lkml.kernel.org/r/1493281021-20737-3-git-send-email-xlpang@redhat.comSigned-off-by:
Xunlei Pang <xlpang@redhat.com> Tested-by:
Michael Holzheu <holzheu@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Young <dyoung@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Juergen Gross <jgross@suse.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Xunlei Pang authored
vmcoreinfo_max_size stands for the vmcoreinfo_data, the correct one we should use is vmcoreinfo_note whose total size is VMCOREINFO_NOTE_SIZE. Like explained in commit 77019967 ("kdump: fix exported size of vmcoreinfo note"), it should not affect the actual function, but we better fix it, also this change should be safe and backward compatible. After this, we can get rid of variable vmcoreinfo_max_size, let's use the corresponding macros directly, fewer variables means more safety for vmcoreinfo operation. [xlpang@redhat.com: fix build warning] Link: http://lkml.kernel.org/r/1494830606-27736-1-git-send-email-xlpang@redhat.com Link: http://lkml.kernel.org/r/1493281021-20737-2-git-send-email-xlpang@redhat.comSigned-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Reviewed-by:
Dave Young <dyoung@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Juergen Gross <jgross@suse.com> Cc: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by:
-
Xunlei Pang authored
As Eric said, "what we need to do is move the variable vmcoreinfo_note out of the kernel's .bss section. And modify the code to regenerate and keep this information in something like the control page. Definitely something like this needs a page all to itself, and ideally far away from any other kernel data structures. I clearly was not watching closely the data someone decided to keep this silly thing in the kernel's .bss section." This patch allocates extra pages for these vmcoreinfo_XXX variables, one advantage is that it enhances some safety of vmcoreinfo, because vmcoreinfo now is kept far away from other kernel data structures. Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by:
Juergen Gross <jgross@suse.com> Suggested-by:
Eric Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Young <dyoung@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
-
Christoph Lameter authored
The reason to disable interrupts seems to be to avoid switching to a different processor while handling per cpu data using individual loads and stores. If we use per cpu RMV primitives we will not have to disable interrupts. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1705171055130.5898@east.gentwo.orgSigned-off-by:
Christoph Lameter <cl@linux.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by:
-
Geert Uytterhoeven authored
With gcc 4.1.2: mm/memory.o: In function `create_huge_pmd': memory.c:(.text+0x93e): undefined reference to `do_huge_pmd_anonymous_page' Interestingly, create_huge_pmd() is emitted in the assembler output, but never called. Converting transparent_hugepage_enabled() from a macro to a static inline function reduced the ability of the compiler to remove unused code. Fix this by marking create_huge_pmd() inline. Fixes: 16981d76 ("mm: improve readability of transparent_hugepage_enabled()") Link: http://lkml.kernel.org/r/1499842660-10665-1-git-send-email-geert@linux-m68k.orgSigned-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ian Abbott authored
If the first parameter of container_of() is a pointer to a non-const-qualified array type (and the third parameter names a non-const-qualified array member), the local variable __mptr will be defined with a const-qualified array type. In ISO C, these types are incompatible. They work as expected in GNU C, but some versions will issue warnings. For example, GCC 4.9 produces the warning "initialization from incompatible pointer type". Here is an example of where the problem occurs: ------------------------------------------------------- #include <linux/kernel.h> #include <linux/module.h> MODULE_LICENSE("GPL"); struct st { int a; char b[16]; }; static int __init example_init(void) { struct st t = { .a = 101, .b = "hello" }; char (*p)[16] = &t.b; struct st *x = container_of(p, struct st, b); printk(KERN_DEBUG "%p %p\n", (void *)&t, (void *)x); return 0; } static void __exit example_exit(void) { } module_init(example_init); module_exit(example_exit); ------------------------------------------------------- Building the module with gcc-4.9 results in these warnings (where '{m}' is the module source and '{k}' is the kernel source): ------------------------------------------------------- In file included from {m}/example.c:1:0: {m}/example.c: In function `example_init': {k}/include/linux/kernel.h:854:48: warning: initialization from incompatible pointer type const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ^ {m}/example.c:14:17: note: in expansion of macro `container_of' struct st *x = container_of(p, struct st, b); ^ {k}/include/linux/kernel.h:854:48: warning: (near initialization for `x') const typeof( ((type *)0)->member ) *__mptr = (ptr); \ ^ {m}/example.c:14:17: note: in expansion of macro `container_of' struct st *x = container_of(p, struct st, b); ^ ------------------------------------------------------- Replace the type checking performed by the macro to avoid these warnings. Make sure `*(ptr)` either has type compatible with the member, or has type compatible with `void`, ignoring qualifiers. Raise compiler errors if this is not true. This is stronger than the previous behaviour, which only resulted in compiler warnings for a type mismatch. [arnd@arndb.de: fix new warnings for container_of()] Link: http://lkml.kernel.org/r/20170620200940.90557-1-arnd@arndb.de Link: http://lkml.kernel.org/r/20170525120316.24473-7-abbotti@mev.co.ukSigned-off-by:Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Acked-by:
-
Stephen Rothwell authored
"kernel.h: handle pointers to arrays better in container_of()" triggers: In file included from include/uapi/linux/stddef.h:1:0, from include/linux/stddef.h:4, from include/uapi/linux/posix_types.h:4, from include/uapi/linux/types.h:13, from include/linux/types.h:5, from include/linux/syscalls.h:71, from fs/dcache.c:17: fs/dcache.c: In function 'release_dentry_name_snapshot': include/linux/compiler.h:542:38: error: call to '__compiletime_assert_305' declared with attribute error: pointer type mismatch in container_of() _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^ include/linux/compiler.h:525:4: note: in definition of macro '__compiletime_assert' prefix ## suffix(); \ ^ include/linux/compiler.h:542:2: note: in expansion of macro '_compiletime_assert' _compiletime_assert(condition, msg, __compiletime_assert_, __LINE__) ^ include/linux/build_bug.h:46:37: note: in expansion of macro 'compiletime_assert' #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) ^ include/linux/kernel.h:860:2: note: in expansion of macro 'BUILD_BUG_ON_MSG' BUILD_BUG_ON_MSG(!__same_type(*(ptr), ((type *)0)->member) && \ ^ fs/dcache.c:305:7: note: in expansion of macro 'container_of' p = container_of(name->name, struct external_name, name[0]); Switch name_snapshot to use unsigned chars, matching struct qstr and struct external_name. Link: http://lkml.kernel.org/r/20170710152134.0f78c1e6@canb.auug.org.auSigned-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c updates from Wolfram Sang: "This pull request contains: - i2c core reorganization. One source file became too monolithic. It is now split up, yet we still have the same named object as the final output. This should ease maintenance. - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX - designware driver gained slave mode support - xgene-slimpro driver gained ACPI support - bigger overhaul for pca-platform driver - the algo-bit module now supports messages with enforced STOP - slightly bigger than usual set of driver updates and improvements and with much appreciated quality assurance from Andy Shevchenko" * 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits) i2c: Provide a stub for i2c_detect_slave_mode() i2c: designware: Let slave adapter support be optional i2c: designware: Make HW init functions static i2c: designware: fix spelling mistakes i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus i2c: pca-platform: correctly set algo_data.reset_chip i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices i2c: designware: enable SLAVE in platform module i2c: designware: add SLAVE mode functions i2c: zx2967: drop COMPILE_TEST dependency i2c: zx2967: always use the same device when printing errors i2c: pca-platform: use dev_warn/dev_info instead of printk i2c: pca-platform: use device managed allocations i2c: pca-platform: add devicetree awareness i2c: pca-platform: switch to struct gpio_desc dt-bindings: add bindings for i2c-pca-platform i2c: cadance: fix ctrl/addr reg write order i2c: zx2967: add i2c controller driver for ZTE's zx2967 family dt: bindings: add documentation for zx2967 family i2c controller i2c: algo-bit: add support for I2C_M_STOP ... -
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommuLinus Torvalds authored
Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: "This work from Amir introduces the inodes index feature, which provides: - hardlinks are not broken on copy up - infrastructure for overlayfs NFS export This also fixes constant st_ino for samefs case for lower hardlinks" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: (33 commits) ovl: mark parent impure and restore timestamp on ovl_link_up() ovl: document copying layers restrictions with inodes index ovl: cleanup orphan index entries ovl: persistent overlay inode nlink for indexed inodes ovl: implement index dir copy up ovl: move copy up lock out ovl: rearrange copy up ovl: add flag for upper in ovl_entry ovl: use struct copy_up_ctx as function argument ovl: base tmpfile in workdir too ovl: factor out ovl_copy_up_inode() helper ovl: extract helper to get temp file in copy up ovl: defer upper dir lock to tempfile link ovl: hash overlay non-dir inodes by copy up origin ovl: cleanup bad and stale index entries on mount ovl: lookup index entry for copy up origin ovl: verify index dir matches upper dir ovl: verify upper root dir matches lower root dir ovl: introduce the inodes index dir feature ovl: generalize ovl_create_workdir() ...
-
Al Viro authored
Reported-and-tested-by:
Meelis Roos <mroos@linux.ee> Fixes: commit d9e968cb "getrlimit()/setrlimit(): move compat to native" Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc fixes from David Miller: - Fix symbol version generation for assembler on sparc, from Nagarathnam Muthusamy. - Fix compound page handling in gup_huge_pmd(), from Nitin Gupta. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix gup_huge_pmd Adding the type of exported symbols sed regex in Makefile.build requires line break between exported symbols Adding asm-prototypes.h for genksyms to generate crc
-
- 11 Jul, 2017 6 commits
-
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull more block updates from Jens Axboe: "This is a followup for block changes, that didn't make the initial pull request. It's a bit of a mixed bag, this contains: - A followup pull request from Sagi for NVMe. Outside of fixups for NVMe, it also includes a series for ensuring that we properly quiesce hardware queues when browsing live tags. - Set of integrity fixes from Dmitry (mostly), fixing various issues for folks using DIF/DIX. - Fix for a bug introduced in cciss, with the req init changes. From Christoph. - Fix for a bug in BFQ, from Paolo. - Two followup fixes for lightnvm/pblk from Javier. - Depth fix from Ming for blk-mq-sched. - Also from Ming, performance fix for mtip32xx that was introduced with the dynamic initialization of commands" * 'for-linus' of git://git.kernel.dk/linux-block: (44 commits) block: call bio_uninit in bio_endio nvmet: avoid unneeded assignment of submit_bio return value nvme-pci: add module parameter for io queue depth nvme-pci: compile warnings in nvme_alloc_host_mem() nvmet_fc: Accept variable pad lengths on Create Association LS nvme_fc/nvmet_fc: revise Create Association descriptor length lightnvm: pblk: remove unnecessary checks lightnvm: pblk: control I/O flow also on tear down cciss: initialize struct scsi_req null_blk: fix error flow for shared tags during module_init block: Fix __blkdev_issue_zeroout loop nvme-rdma: unconditionally recycle the request mr nvme: split nvme_uninit_ctrl into stop and uninit virtio_blk: quiesce/unquiesce live IO when entering PM states mtip32xx: quiesce request queues to make sure no submissions are inflight nbd: quiesce request queues to make sure no submissions are inflight nvme: kick requeue list when requeueing a request instead of when starting the queues nvme-pci: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-loop: quiesce/unquiesce admin_q instead of start/stop its hw queues nvme-fc: quiesce/unquiesce admin_q instead of start/stop its hw queues ... -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes and sane default from Steve French: "Upgrade default dialect to more secure SMB3 from older cifs dialect" * tag 'smb3-security-fixes-for-4.13' of git://git.samba.org/sfrench/cifs-2.6: cifs: Clean up unused variables in smb2pdu.c [SMB3] Improve security, move default dialect to SMB3 from old CIFS [SMB3] Remove ifdef since SMB3 (and later) now STRONGLY preferred CIFS: Reconnect expired SMB sessions CIFS: Display SMB2 error codes in the hex format cifs: Use smb 2 - 3 and cifsacl mount options setacl function cifs: prototype declaration and definition to set acl for smb 2 - 3 and cifsacl mount options
-
git://github.com/ceph/ceph-clientLinus Torvalds authored
Pull ceph updates from Ilya Dryomov: "The main item here is support for v12.y.z ("Luminous") clusters: RESEND_ON_SPLIT, RADOS_BACKOFF, OSDMAP_PG_UPMAP and CRUSH_CHOOSE_ARGS feature bits, and various other changes in the RADOS client protocol. On top of that we have a new fsc mount option to allow supplying fscache uniquifier (similar to NFS) and the usual pile of filesystem fixes from Zheng" * tag 'ceph-for-4.13-rc1' of git://github.com/ceph/ceph-client: (44 commits) libceph: advertise support for NEW_OSDOP_ENCODING and SERVER_LUMINOUS libceph: osd_state is 32 bits wide in luminous crush: remove an obsolete comment crush: crush_init_workspace starts with struct crush_work libceph, crush: per-pool crush_choose_arg_map for crush_do_rule() crush: implement weight and id overrides for straw2 libceph: apply_upmap() libceph: compute actual pgid in ceph_pg_to_up_acting_osds() libceph: pg_upmap[_items] infrastructure libceph: ceph_decode_skip_* helpers libceph: kill __{insert,lookup,remove}_pg_mapping() libceph: introduce and switch to decode_pg_mapping() libceph: don't pass pgid by value libceph: respect RADOS_BACKOFF backoffs libceph: make DEFINE_RB_* helpers more general libceph: avoid unnecessary pi lookups in calc_target() libceph: use target pi for calc_target() calculations libceph: always populate t->target_{oid,oloc} in calc_target() libceph: make sure need_resend targets reflect latest map libceph: delete from need_resend_linger before check_linger_pool_dne() ... -
git://www.linux-watchdog.org/linux-watchdogLinus Torvalds authored
Pull watchdog updates from Wim Van Sebroeck: - Add Renesas RZ/A WDT Watchdog driver - STM32 Independent WatchDoG (IWDG) support - UniPhier watchdog support - Add F71868 support - Add support for NCT6793D and NCT6795D - dw_wdt: add reset lines support - core: add option to avoid early handling of watchdog - core: introduce watchdog_worker_should_ping helper - Cleanups and improvements for sama5d4, intel-mid_wdt, s3c2410_wdt, orion_wdt, gpio_wdt, it87_wdt, meson_wdt, davinci_wdt, bcm47xx_wdt, zx2967_wdt, cadence_wdt * git://www.linux-watchdog.org/linux-watchdog: (32 commits) watchdog: introduce watchdog_worker_should_ping helper watchdog: uniphier: add UniPhier watchdog driver dt-bindings: watchdog: add description for UniPhier WDT controller watchdog: cadence_wdt: make of_device_ids const. watchdog: zx2967: constify zx2967_wdt_ops. watchdog: bcm47xx_wdt: constify bcm47xx_wdt_hard_ops and bcm47xx_wdt_soft_ops watchdog: davinci: Add missing clk_disable_unprepare(). watchdog: davinci: Handle return value of clk_prepare_enable watchdog: meson: Handle return value of clk_prepare_enable watchdog: it87: Add support for various Super-IO chips watchdog: it87: Use infrastructure to stop watchdog on reboot watchdog: it87: Drop support for resetting watchdog though CIR and Game port watchdog: it87: Convert to use watchdog core infrastructure watchdog: it87: Drop FSF mailing address watchdog: dw_wdt: get reset lines from dt watchdog: bindings: dw_wdt: add reset lines watchdog: w83627hf: Add support for NCT6793D and NCT6795D watchdog: core: add option to avoid early handling of watchdog watchdog: f71808e_wdt: Add F71868 support watchdog: Add STM32 IWDG driver ...
-
Linus Torvalds authored
Merge tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: "Changes in this pull request are around catching up cros_ec with the internal chromeos-kernel versions of cros_ec, cros_ec_lpc, and cros_ec_lightbar. Also, switching maintainership from olof to bleung" * tag 'chrome-platform-for-linus-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome : Add myself as Maintainer platform/chrome: cros_ec_lightbar - hide unused PM functions cros_ec: Don't signal wake event for non-wake host events cros_ec: Fix deadlock when EC is not responsive at probe cros_ec: Don't return error when checking command version platform/chrome: cros_ec_lightbar - Avoid I2C xfer to EC during suspend platform/chrome: cros_ec_lightbar - Add userspace lightbar control bit to EC platform/chrome: cros_ec_lightbar - Control of suspend/resume lightbar sequence platform/chrome: cros_ec_lightbar - Add lightbar program feature to sysfs platform/chrome: cros_ec_lpc: Add MKBP events support over ACPI platform/chrome: cros_ec_lpc: Add power management ops platform/chrome: cros_ec_lpc: Add support for GOOG004 ACPI device platform/chrome: cros_ec_lpc: Add support for mec1322 EC platform/chrome: cros_ec_lpc: Add R/W helpers to LPC protocol variants mfd: cros_ec: Add support for dumping panic information cros_ec_debugfs: Pass proper struct sizes to cros_ec_cmd_xfer() mfd: cros_ec: add debugfs, console log file mfd: cros_ec: Add EC console read structures definitions mfd: cros_ec: Add helper for event notifier.
-
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommuLinus Torvalds authored
Pull x86nommu update from Greg Ungerer: "Only a single change, to remove old Kconfig options from defconfigs" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: m68k: defconfig: Cleanup from old Kconfig options
-
- 10 Jul, 2017 5 commits
-
-
Linus Torvalds authored
Merge more updates from Andrew Morton: - most of the rest of MM - KASAN updates - lib/ updates - checkpatch updates - some binfmt_elf changes - various misc bits * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (115 commits) kernel/exit.c: avoid undefined behaviour when calling wait4() kernel/signal.c: avoid undefined behaviour in kill_something_info binfmt_elf: safely increment argv pointers s390: reduce ELF_ET_DYN_BASE powerpc: move ELF_ET_DYN_BASE to 4GB / 4MB arm64: move ELF_ET_DYN_BASE to 4GB / 4MB arm: move ELF_ET_DYN_BASE to 4MB binfmt_elf: use ELF_ET_DYN_BASE only for PIE fs, epoll: short circuit fetching events if thread has been killed checkpatch: improve multi-line alignment test checkpatch: improve macro reuse test checkpatch: change format of --color argument to --color[=WHEN] checkpatch: silence perl 5.26.0 unescaped left brace warnings checkpatch: improve tests for multiple line function definitions checkpatch: remove false warning for commit reference checkpatch: fix stepping through statements with $stat and ctx_statement_block checkpatch: [HLP]LIST_HEAD is also declaration checkpatch: warn when a MAINTAINERS entry isn't [A-Z]:\t checkpatch: improve the unnecessary OOM message test lib/bsearch.c: micro-optimize pivot position calculation ...
-
zhongjiang authored
wait4(-2147483648, 0x20, 0, 0xdd0000) triggers: UBSAN: Undefined behaviour in kernel/exit.c:1651:9 The related calltrace is as follows: negation of -2147483648 cannot be represented in type 'int': CPU: 9 PID: 16482 Comm: zj Tainted: G B ---- ------- 3.10.0-327.53.58.71.x86_64+ #66 Hardware name: Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA , BIOS CTSAV036 04/27/2011 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SyS_wait4+0x1cb/0x1e0 system_call_fastpath+0x16/0x1b Exclude the overflow to avoid the UBSAN warning. Link: http://lkml.kernel.org/r/1497264618-20212-1-git-send-email-zhongjiang@huawei.comSigned-off-by:zhongjiang <zhongjiang@huawei.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
-
zhongjiang authored
When running kill(72057458746458112, 0) in userspace I hit the following issue. UBSAN: Undefined behaviour in kernel/signal.c:1462:11 negation of -2147483648 cannot be represented in type 'int': CPU: 226 PID: 9849 Comm: test Tainted: G B ---- ------- 3.10.0-327.53.58.70.x86_64_ubsan+ #116 Hardware name: Huawei Technologies Co., Ltd. RH8100 V3/BC61PBIA, BIOS BLHSV028 11/11/2014 Call Trace: dump_stack+0x19/0x1b ubsan_epilogue+0xd/0x50 __ubsan_handle_negate_overflow+0x109/0x14e SYSC_kill+0x43e/0x4d0 SyS_kill+0xe/0x10 system_call_fastpath+0x16/0x1b Add code to avoid the UBSAN detection. [akpm@linux-foundation.org: tweak comment] Link: http://lkml.kernel.org/r/1496670008-59084-1-git-send-email-zhongjiang@huawei.comSigned-off-by: -
Kees Cook authored
When building the argv/envp pointers, the envp is needlessly pre-incremented instead of just continuing after the argv pointers are finished. In some (likely impossible) race where the strings could be changed from userspace between copy_strings() and here, it might be possible to confuse the envp position. Instead, just use sp like everything else. Link: http://lkml.kernel.org/r/20170622173838.GA43308@beastSigned-off-by:
-
Kees Cook authored
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address. Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.orgSigned-off-by:
-
