- 18 Dec, 2009 22 commits
-
-
Mikael Pettersson authored
commit 7d1849af upstream. The x86 lapic nmi watchdog does not recognize AMD Family 11h, resulting in: NMI watchdog: CPU not supported As far as I can see from available documentation (the BKDM), family 11h looks identical to family 10h as far as the PMU is concerned. Extending the check to accept family 11h results in: Testing NMI watchdog ... OK. I've been running with this change on a Turion X2 Ultra ZM-82 laptop for a couple of weeks now without problems. Signed-off-by:
Mikael Pettersson <mikpe@it.uu.se> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Joerg Roedel <joerg.roedel@amd.com> LKML-Reference: <19223.53436.931768.278021@pilspetsen.it.uu.se> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Leann Ogasawara authored
commit 4832ddda upstream. Bug reporter noted their system with an ASUS P4S800 motherboard would hang when rebooting unless reboot=b was specified. Their dmidecode didn't contain descriptive System Information for Manufacturer or Product Name, so I used their Base Board Information to create a reboot quirk patch. The bug reporter confirmed this patch resolves the reboot hang. Handle 0x0001, DMI type 1, 25 bytes System Information Manufacturer: System Manufacturer Product Name: System Name Version: System Version Serial Number: SYS-1234567890 UUID: E0BFCD8B-7948-D911-A953-E486B4EEB67F Wake-up Type: Power Switch Handle 0x0002, DMI type 2, 8 bytes Base Board Information Manufacturer: ASUSTeK Computer INC. Product Name: P4S800 Version: REV 1.xx Serial Number: xxxxxxxxxxx BugLink: http://bugs.launchpad.net/bugs/366682 ASUS P4S800 will hang when rebooting unless reboot=b is specified. Add a quirk to reboot through the bios. Signed-off-by:
Leann Ogasawara <leann.ogasawara@canonical.com> LKML-Reference: <1259972107.4629.275.camel@emiko> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Joe Perches authored
commit 41855b77 upstream. Signed-off-by:
Joe Perches <joe@perches.com> LKML-Reference: <1257818330.12852.72.camel@Joe-Laptop.home> Signed-off-by:
-
Tejun Heo authored
commit 2ae8bb75 upstream. iommu=nodac should forbid dac instead of enabling it. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Matteo Frigo <athena@fftw.org> LKML-Reference: <4AE5B52A.4050408@kernel.org> Signed-off-by:
-
Darrick J. Wong authored
commit 4528752f upstream. On a multi-node x3950M2 system, there's a slight oddity in the PCI device tree for all secondary nodes: 30:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) \-33:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01) \-34:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) ...as compared to the primary node: 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) \-01:00.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) 03:00.0 PCI bridge: IBM CalIOC2 PCI-E Root Port (rev 01) \-04:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) In both nodes, the LSI RAID controller hangs off a CalIOC2 device, but on the secondary nodes, the BIOS hides the VGA device and substitutes the device tree ending with the disk controller. It would seem that Calgary devices don't necessarily appear at the top of the PCI tree, which means that the current code to find the Calgary IOMMU that goes with a particular device is buggy. Rather than walk all the way to the top of the PCI device tree and try to match bus number with Calgary descriptor, the code needs to examine each parent of the particular device; if it encounters a Calgary with a matching bus number, simply use that. Otherwise, we BUG() when the bus number of the Calgary doesn't match the bus number of whatever's at the top of the device tree. Extra note: This patch appears to work correctly for the x3950 that came before the x3950 M2. Signed-off-by:
Darrick J. Wong <djwong@us.ibm.com> Acked-by:
Muli Ben-Yehuda <muli@il.ibm.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Jon D. Mason <jdmason@kudzu.us> Cc: Corinna Schultz <coschult@us.ibm.com> LKML-Reference: <20091202230556.GG10295@tux1.beaverton.ibm.com> Signed-off-by:
-
Joerg Roedel authored
commit 9f800de3 upstream. This function may be called on the resume path and can not be dropped after booting. Signed-off-by:
Joerg Roedel <joerg.roedel@amd.com> Signed-off-by:
-
Joerg Roedel authored
commit be831297 upstream. For some devices the ACPI table may define unity map requirements which must me met when the IOMMU is enabled. So we need to attach devices to their domains as early as possible so that these mappings are in place when needed. This patch assigns the domains right after they are allocated. Otherwise this can result in I/O page faults before a driver binds to a device and BIOS is still using it. Signed-off-by:
-
Mike Galbraith authored
commit eae0c9df upstream. Commit 1b9508f6, "Rate-limit newidle" has been confirmed to fix the netperf UDP loopback regression reported by Alex Shi. This is a cleanup and a fix: - moved to a more out of the way spot - fix to ensure that balancing doesn't try to balance runqueues which haven't gone online yet, which can mess up CPU enumeration during boot. Reported-by:
Alex Shi <alex.shi@intel.com> Reported-by:
Zhang, Yanmin <yanmin_zhang@linux.intel.com> Signed-off-by:
Mike Galbraith <efault@gmx.de> Acked-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1257821402.5648.17.camel@marge.simson.net> Signed-off-by:
-
Mike Galbraith authored
commit 1b9508f6 upstream. Rate limit newidle to migration_cost. It's a win for all stages of sysbench oltp tests. Signed-off-by:
-
Mike Galbraith authored
commit fd210738 upstream. Ingo Molnar reported: [ 26.804000] BUG: using smp_processor_id() in preemptible [00000000] code: events/1/10 [ 26.808000] caller is vmstat_update+0x26/0x70 [ 26.812000] Pid: 10, comm: events/1 Not tainted 2.6.32-rc5 #6887 [ 26.816000] Call Trace: [ 26.820000] [<c1924a24>] ? printk+0x28/0x3c [ 26.824000] [<c13258a0>] debug_smp_processor_id+0xf0/0x110 [ 26.824000] mount used greatest stack depth: 1464 bytes left [ 26.828000] [<c111d086>] vmstat_update+0x26/0x70 [ 26.832000] [<c1086418>] worker_thread+0x188/0x310 [ 26.836000] [<c10863b7>] ? worker_thread+0x127/0x310 [ 26.840000] [<c108d310>] ? autoremove_wake_function+0x0/0x60 [ 26.844000] [<c1086290>] ? worker_thread+0x0/0x310 [ 26.848000] [<c108cf0c>] kthread+0x7c/0x90 [ 26.852000] [<c108ce90>] ? kthread+0x0/0x90 [ 26.856000] [<c100c0a7>] kernel_thread_helper+0x7/0x10 [ 26.860000] BUG: using smp_processor_id() in preemptible [00000000] code: events/1/10 [ 26.864000] caller is vmstat_update+0x3c/0x70 Because this commit: a1f84a3a: sched: Check for an idle shared cache in select_task_rq_fair() broke ->cpus_allowed. Signed-off-by:
-
Mike Galbraith authored
commit a1f84a3a upstream. When waking affine, check for an idle shared cache, and if found, wake to that CPU/sibling instead of the waker's CPU. This improves pgsql+oltp ramp up by roughly 8%. Possibly more for other loads, depending on overlap. The trade-off is a roughly 1% peak downturn if tasks are truly synchronous. Signed-off-by:
-
Rafael J. Wysocki authored
commit bab636b9 upstream. Lockdep complains about taking the parent lock in __pm_runtime_set_status(), so mark it as nested. Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Reported-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
Kristian Høgsberg authored
commit ec70ccd8 upstream. In the CONFIG_PERF_USE_VMALLOC case, perf_mmap_data_free() only schedules the cleanup of the perf_mmap_data struct. In that case we have to wait until the work has been done before we free data. Signed-off-by:
Kristian Høgsberg <krh@bitplanet.net> Cc: David S. Miller <davem@davemloft.net> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1259697901-1747-1-git-send-email-krh@bitplanet.net> Signed-off-by:
-
Xiao Guangrong authored
commit 59d069eb upstream. In current code in perf_swevent_hrtimer(), data.period is not initialized, The result is obvious wrong: # ./perf record -f -e cpu-clock make # ./perf report # Samples: 1740 # # Overhead Command ...... # ........ ........ .......................................... # 1025422183050275328.00% sh libc-2.9.90.so ... 1025422183050275328.00% perl libperl.so ... 1025422168240043264.00% perl [kernel] ... 1025422030011210752.00% perl [kernel] ... Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <4B14E220.2050107@cn.fujitsu.com> Signed-off-by:
-
Arjan van de Ven authored
commit 4c49b128 upstream. u64 is invalid in userspace headers, including ioctl definitions; use __u64 instead Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <20091113214733.7cd76be9@infradead.org> Signed-off-by:
-
Paul E. McKenney authored
commit dbe01350 upstream. Some variants of gcc are reputed to dislike forward references to functions declared "inline". Remove the "inline" keyword from such functions. Signed-off-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: laijs@cn.fujitsu.com Cc: dipankar@in.ibm.com Cc: mathieu.desnoyers@polymtl.ca Cc: josh@joshtriplett.org Cc: dvhltc@us.ibm.com Cc: niv@us.ibm.com Cc: peterz@infradead.org Cc: rostedt@goodmis.org Cc: Valdis.Kletnieks@vt.edu Cc: dhowells@redhat.com Cc: Benjamin Gilbert <bgilbert@cs.cmu.edu> LKML-Reference: <12578890422402-git-send-email-> Signed-off-by:
-
Paul E. McKenney authored
commit 9160306e upstream. Impose a clear locking design on the note_new_gpnum() function's use of the ->gpnum counter. This is done by updating rdp->gpnum only from the corresponding leaf rcu_node structure's rnp->gpnum field, and even then only under the protection of that same rcu_node structure's ->lock field. Performance and scalability are maintained using a form of double-checked locking, and excessive spinning is avoided by use of the spin_trylock() function. The use of spin_trylock() is safe due to the fact that CPUs who fail to acquire this lock will try again later. The hierarchical nature of the rcu_node data structure limits contention (which could be limited further if need be using the RCU_FANOUT kernel parameter). Without this patch, obscure but quite possible races could result in a quiescent state that occurred during one grace period to be accounted to the following grace period, causing this following grace period to end prematurely. Not good! Signed-off-by:
-
Paul E. McKenney authored
commit d09b62df upstream. Impose a clear locking design on the rcu_process_gp_end() function's use of the ->completed counter. This is done by creating a ->completed field in the rcu_node structure, which can safely be accessed under the protection of that structure's lock. Performance and scalability are maintained by using a form of double-checked locking, so that rcu_process_gp_end() only acquires the leaf rcu_node structure's ->lock if a grace period has recently ended. This fix reduces rcutorture failure rate by at least two orders of magnitude under heavy stress with force_quiescent_state() being invoked artificially often. Without this fix, unsynchronized access to the ->completed field can cause rcu_process_gp_end() to advance callbacks whose grace period has not yet expired. (Bad idea!) Signed-off-by:
-
Paul E. McKenney authored
commit 281d150c upstream. Impose a clear locking design on non-NO_HZ handling of the ->completed counter. This increases the distance between the RCU and the CPU-hotplug mechanisms. Signed-off-by:
-
Jay Fenlason authored
commit 8c0c0cc2 upstream. Queueing to receive an ISO packet with a payload length of zero silently does nothing in dualbuffer mode, and crashes the kernel in packet-per-buffer mode. Return an error in dualbuffer mode, because the DMA controller won't let us do what we want, and work correctly in packet-per-buffer mode. Signed-off-by:
Jay Fenlason <fenlason@redhat.com> Signed-off-by:
Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by:
-
zhao.ming9@zte.com.cn authored
commit 8d87cacd upstream. This patch adds ZTE modem devices. Signed-off-by:
Ming Zhao <zhao.ming9@zte.com.cn> Signed-off-by:
-
Alan Stern authored
commit f3f6faa9 upstream. This patch (as1312) fixes a minor bug in usb-storage. The fill_inquiry() routine neglects to pre-load the inquiry data buffer with spaces. As a result, if the vendor name is shorter than 8 characters or the product name is shorter than 16, the remainder will be filled with garbage. The patch also removes some unnecessary calls to strlen(). Signed-off-by:
-
- 14 Dec, 2009 18 commits
-
-
Greg Kroah-Hartman authored
-
Theodore Ts'o authored
(cherry picked from commit fab3a549) Fix the following potential circular locking dependency between mm->mmap_sem and ei->i_data_sem: ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.32-04115-gec044c5 #37 ------------------------------------------------------- ureadahead/1855 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [<ffffffff81107224>] might_fault+0x5c/0xac but task is already holding lock: (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem){++++..}: [<ffffffff81099bfa>] __lock_acquire+0xb67/0xd0f [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81516633>] down_read+0x51/0x84 [<ffffffff811a2414>] ext4_get_blocks+0x50/0x2a5 [<ffffffff811a3453>] ext4_get_block+0xab/0xef [<ffffffff81154f39>] do_mpage_readpage+0x198/0x48d [<ffffffff81155360>] mpage_readpages+0xd0/0x114 [<ffffffff811a104b>] ext4_readpages+0x1d/0x1f [<ffffffff810f8644>] __do_page_cache_readahead+0x12f/0x1bc [<ffffffff810f86f2>] ra_submit+0x21/0x25 [<ffffffff810f0cfd>] filemap_fault+0x19f/0x32c [<ffffffff81107b97>] __do_fault+0x55/0x3a2 [<ffffffff81109db0>] handle_mm_fault+0x327/0x734 [<ffffffff8151aaa9>] do_page_fault+0x292/0x2aa [<ffffffff81518205>] page_fault+0x25/0x30 [<ffffffff812a34d8>] clear_user+0x38/0x3c [<ffffffff81167e16>] padzero+0x20/0x31 [<ffffffff81168b47>] load_elf_binary+0x8bc/0x17ed [<ffffffff81130e95>] search_binary_handler+0xc2/0x259 [<ffffffff81166d64>] load_script+0x1b8/0x1cc [<ffffffff81130e95>] search_binary_handler+0xc2/0x259 [<ffffffff8113255f>] do_execve+0x1ce/0x2cf [<ffffffff81027494>] sys_execve+0x43/0x5a [<ffffffff8102918a>] stub_execve+0x6a/0xc0 -> #0 (&mm->mmap_sem){++++++}: [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81107251>] might_fault+0x89/0xac [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157 [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1 [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159 [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6 [<ffffffff811392ca>] sys_ioctl+0x56/0x79 [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 1 lock held by ureadahead/1855: #0: (&ei->i_data_sem){++++..}, at: [<ffffffff811be1fd>] ext4_fiemap+0x11b/0x159 stack backtrace: Pid: 1855, comm: ureadahead Not tainted 2.6.32-04115-gec044c5 #37 Call Trace: [<ffffffff81098c70>] print_circular_bug+0xa8/0xb7 [<ffffffff81099aa4>] __lock_acquire+0xa11/0xd0f [<ffffffff8102f229>] ? sched_clock+0x9/0xd [<ffffffff81099e7e>] lock_acquire+0xdc/0x102 [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff81107251>] might_fault+0x89/0xac [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff81124b44>] ? __kmalloc+0x13b/0x18c [<ffffffff81139382>] fiemap_fill_next_extent+0x95/0xda [<ffffffff811bcb43>] ext4_ext_fiemap_cb+0x138/0x157 [<ffffffff811bca0b>] ? ext4_ext_fiemap_cb+0x0/0x157 [<ffffffff811be069>] ext4_ext_walk_space+0x178/0x1f1 [<ffffffff811be21e>] ext4_fiemap+0x13c/0x159 [<ffffffff81107224>] ? might_fault+0x5c/0xac [<ffffffff811390e6>] do_vfs_ioctl+0x348/0x4d6 [<ffffffff8129f6d0>] ? __up_read+0x8d/0x95 [<ffffffff81517fb5>] ? retint_swapgs+0x13/0x1b [<ffffffff811392ca>] sys_ioctl+0x56/0x79 [<ffffffff81028cb2>] system_call_fastpath+0x16/0x1b Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit 4a58579b) This patch fixes three problems in the handling of the EXT4_IOC_MOVE_EXT ioctl: 1. In current EXT4_IOC_MOVE_EXT, there are read access mode checks for original and donor files, but they allow the illegal write access to donor file, since donor file is overwritten by original file data. To fix this problem, change access mode checks of original (r->r/w) and donor (r->w) files. 2. Disallow the use of donor files that have a setuid or setgid bits. 3. Call mnt_want_write() and mnt_drop_write() before and after ext4_move_extents() calling to get write access to a mount. Signed-off-by:
Akira Fujita <a-fujita@rs.jp.nec.com> Signed-off-by:
-
Jan Kara authored
(cherry picked from commit b436b9be) We cannot rely on buffer dirty bits during fsync because pdflush can come before fsync is called and clear dirty bits without forcing a transaction commit. What we do is that we track which transaction has last changed the inode and which transaction last changed allocation and force it to disk on fsync. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 194074ac) Inside ->setattr() call both ATTR_UID and ATTR_GID may be valid This means that we may end-up with transferring all quotas. Add we have to reserve QUOTA_DEL_BLOCKS for all quotas, as we do in case of QUOTA_INIT_BLOCKS. Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Reviewed-by:
Mingming Cao <cmm@us.ibm.com> Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 5aca07eb) Currently all quota block reservation macros contains hard-coded "2" aka MAXQUOTAS value. This is no good because in some places it is not obvious to understand what does this digit represent. Let's introduce new macro with self descriptive name. Signed-off-by:
-
Dmitry Monakhov authored
(cherry picked from commit 8aa6790f) Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Acked-by:
-
Curt Wohlgemuth authored
(cherry picked from commit b844167e) This fixes a leak of blocks in an inode prealloc list if device failures cause ext4_mb_mark_diskspace_used() to fail. Signed-off-by:
Curt Wohlgemuth <curtw@google.com> Acked-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Josef Bacik authored
(cherry picked from commit d4edac31) There is a potential race when a transaction is committing right when the file system is being umounting. This could reduce in a race because EXT4_SB(sb)->s_group_info could be freed in ext4_put_super before the commit code calls a callback so the mballoc code can release freed blocks in the transaction, resulting in a panic trying to access the freed s_group_info. The fix is to wait for the transaction to finish committing before we shutdown the multiblock allocator. Signed-off-by:
Josef Bacik <josef@redhat.com> Signed-off-by:
-
Jan Kara authored
(cherry picked from commit b9a4207d) When ext4_write_begin fails after allocating some blocks or generic_perform_write fails to copy data to write, we truncate blocks already instantiated beyond i_size. Although these blocks were never inside i_size, we have to truncate the pagecache of these blocks so that corresponding buffers get unmapped. Otherwise subsequent __block_prepare_write (called because we are retrying the write) will find the buffers mapped, not call ->get_block, and thus the page will be backed by already freed blocks leading to filesystem and data corruption. Signed-off-by:
-
Roel Kluin authored
(cherry picked from commit c09eef30) Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
(cherry picked from commit e6ec116b) OOM happens. Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit ac48b0a1) Integrate duplicate lines (acquire/release semaphore and invalidate extent cache in move_extent_per_page()) into mext_replace_branches(), to reduce source and object code size. Signed-off-by:
-
Kazuya Mio authored
(cherry picked from commit 446aaa6e) The move_extent.moved_len is used to pass back the number of exchanged blocks count to user space. Currently the caller must clear this field; but we spend more code space checking for this requirement than simply zeroing the field ourselves, so let's just make life easier for everyone all around. Signed-off-by:
Kazuya Mio <k-mio@sx.jp.nec.com> Signed-off-by:
-
Akira Fujita authored
(cherry picked from commit 94d7c16c) At the beginning of ext4_move_extent(), we call ext4_discard_preallocations() to discard inode PAs of orig and donor inodes. But in the following case, blocks can be double freed, so move ext4_discard_preallocations() to the end of ext4_move_extents(). 1. Discard inode PAs of orig and donor inodes with ext4_discard_preallocations() in ext4_move_extents(). orig : [ DATA1 ] donor: [ DATA2 ] 2. While data blocks are exchanging between orig and donor inodes, new inode PAs is created to orig by other process's block allocation. (Since there are semaphore gaps in ext4_move_extents().) And new inode PAs is used partially (2-1). 2-1 Create new inode PAs to orig inode orig : [ DATA1 | used PA1 | free PA1 ] donor: [ DATA2 ] 3. Donor inode which has old orig inode's blocks is deleted after EXT4_IOC_MOVE_EXT finished (3-1, 3-2). So the block bitmap corresponds to old orig inode's blocks are freed. 3-1 After EXT4_IOC_MOVE_EXT finished orig : [ DATA2 | free PA1 ] donor: [ DATA1 | used PA1 ] 3-2 Delete donor inode orig : [ DATA2 | free PA1 ] donor: [ FREE SPACE(DATA1) | FREE SPACE(used PA1) ] 4. The double-free of blocks is occurred, when close() is called to orig inode. Because ext4_discard_preallocations() for orig inode frees used PA1 and free PA1, though used PA1 is already freed in 3. 4-1 Double-free of blocks is occurred orig : [ DATA2 | FREE SPACE(free PA1) ] donor: [ FREE SPACE(DATA1) | DOUBLE FREE(used PA1) ] Signed-off-by:
-
Eric Sandeen authored
(cherry picked from commit e3bb52ae) Users on the linux-ext4 list recently complained about differences across filesystems w.r.t. how to mount without a journal replay. In the discussion it was noted that xfs's "norecovery" option is perhaps more descriptively accurate than "noload," so let's make that an alias for ext4. Also show this status in /proc/mounts Signed-off-by:
-
Eric Sandeen authored
(cherry picked from commit 5328e635) It is anticipated that when sb_issue_discard starts doing real work on trim-capable devices, we may see issues. Make this mount-time optional, and default it to off until we know that things are working out OK. Signed-off-by:
-
Jan Kara authored
(cherry picked from commit 2bba702d) When an error happened in ext4_splice_branch we failed to notice that in ext4_ind_get_blocks and mapped the buffer anyway. Fix the problem by checking for error properly. Signed-off-by:
-
