* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode, AMD: Update copyrights
  x86, microcode, AMD: Exit early on success
  x86, microcode, AMD: Simplify ucode verification
  x86, microcode, AMD: Add a reusable buffer
  x86, microcode, AMD: Add a vendor-specific exit function

* 'x86-rdrand-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  random: Use arch_get_random_int instead of cycle counter if avail

* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, centaur: Enable cx8 for VIA Eden too

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Use "do { } while(0)" for empty lock_cmos()/unlock_cmos() macros
  x86: Use "do { } while(0)" for empty flush_tlb_fix_spurious_fault() macro
  x86, CPU: Drop superfluous get_cpu_cap() prototype
  arch/x86/mm/pageattr.c: Quiet sparse noise; local functions should be static
  arch/x86/kernel/ptrace.c: Quiet sparse noise
  x86: Use kmemdup() in copy_thread(), rather than duplicating its implementation
  x86: Replace the EVT_TO_HPET_DEV() macro with an inline function

* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86: Fix atomic64_xxx_cx8() functions
  x86: Fix and improve cmpxchg_double{,_local}()
  x86_64, asm: Optimise fls(), ffs() and fls64()
  x86, bitops: Move fls64.h inside __KERNEL__
  x86: Fix and improve percpu_cmpxchg{8,16}b_double()
  x86: Report cpb and eff_freq_ro flags correctly
  x86/i386: Use less assembly in strlen(), speed things up a bit
  x86: Use the same node_distance for 32 and 64-bit
  x86: Fix rflags in FAKE_STACK_FRAME
  x86: Clean up and extend do_int3()
  x86: Call do_notify_resume() with interrupts enabled
  x86/div64: Add a micro-optimization shortcut if base is power of two
  x86-64: Cleanup some assembly entry points
  x86-64: Slightly shorten line system call entry and exit paths
  x86-64: Reduce amount of redundant code generated for invalidate_interruptNN
  x86-64: Slightly shorten int_ret_from_sys_call
  x86, efi: Convert efi_phys_get_time() args to physical addresses
  x86: Default to vsyscall=emulate
  x86-64: Set siginfo and context on vsyscall emulation faults
  x86: consolidate xchg and xadd macros
  ...

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Skip cpus with apic-ids >= 255 in !x2apic_mode
  x86, x2apic: Allow "nox2apic" to disable x2apic mode setup by BIOS
  x86, x2apic: Fallback to xapic when BIOS doesn't setup interrupt-remapping
  x86, acpi: Skip acpi x2apic entries if the x2apic feature is not present
  x86, apic: Add probe() for apic_flat
  x86: Simplify code by removing a !SMP #ifdefs from 'struct cpuinfo_x86'
  x86: Convert per-cpu counter icr_read_retry_count into a member of irq_stat
  x86: Add per-cpu stat counter for APIC ICR read tries
  pci, x86/io-apic: Allow PCI_IOAPIC to be user configurable on x86
  x86: Fix the !CONFIG_NUMA build of the new CPU ID fixup code support
  x86: Add NumaChip support
  x86: Add x86_init platform override to fix up NUMA core numbering
  x86: Make flat_init_apic_ldr() available

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, tsc: Skip TSC synchronization checks for tsc=reliable
  clocksource: Convert tcb_clksrc to use clocksource_register_hz/khz
  clocksource: cris: Convert to clocksource_register_khz
  clocksource: xtensa: Convert to clocksource_register_hz/khz
  clocksource: um: Convert to clocksource_register_hz/khz
  clocksource: parisc: Convert to clocksource_register_hz/khz
  clocksource: m86k: Convert to clocksource_register_hz/khz
  time: x86: Replace LATCH with PIT_LATCH in i8253 clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from acpi_pm clocksource driver
  time: x86: Remove CLOCK_TICK_RATE from mach_timer.h
  time: x86: Remove CLOCK_TICK_RATE from tsc code
  time: Fix spelling mistakes in new comments
  time: fix bogus comment in timekeeping_get_ns_raw

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  sched/tracing: Add a new tracepoint for sleeptime
  sched: Disable scheduler warnings during oopses
  sched: Fix cgroup movement of waking process
  sched: Fix cgroup movement of newly created process
  sched: Fix cgroup movement of forking process
  sched: Remove cfs bandwidth period check in tg_set_cfs_period()
  sched: Fix load-balance lock-breaking
  sched: Replace all_pinned with a generic flags field
  sched: Only queue remote wakeups when crossing cache boundaries
  sched: Add missing rcu_dereference() around ->real_parent usage
  [S390] fix cputime overflow in uptime_proc_show
  [S390] cputime: add sparse checking and cleanup
  sched: Mark parent and real_parent as __rcu
  sched, nohz: Fix missing RCU read lock
  sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer
  sched, nohz: Fix the idle cpu check in nohz_idle_balance
  sched: Use jump_labels for sched_feat
  sched/accounting: Fix parameter passing in task_group_account_field
  sched/accounting: Fix user/system tick double accounting
  sched/accounting: Re-use scheduler statistics for the root cgroup
  ...

Fix up conflicts in
 - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h
	usecs_to_cputime64() vs the sparse cleanups
 - kernel/sched/fair.c, kernel/time/tick-sched.c
	scheduler changes in multiple branches

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (106 commits)
  perf kvm: Fix copy & paste error in description
  perf script: Kill script_spec__delete
  perf top: Fix a memory leak
  perf stat: Introduce get_ratio_color() helper
  perf session: Remove impossible condition check
  perf tools: Fix feature-bits rework fallout, remove unused variable
  perf script: Add generic perl handler to process events
  perf tools: Use for_each_set_bit() to iterate over feature flags
  perf tools: Unify handling of features when writing feature section
  perf report: Accept fifos as input file
  perf tools: Moving code in some files
  perf tools: Fix out-of-bound access to struct perf_session
  perf tools: Continue processing header on unknown features
  perf tools: Improve macros for struct feature_ops
  perf: builtin-record: Document and check that mmap_pages must be a power of two.
  perf: builtin-record: Provide advice if mmap'ing fails with EPERM.
  perf tools: Fix truncated annotation
  perf script: look up thread using tid instead of pid
  perf tools: Look up thread names for system wide profiling
  perf tools: Fix comm for processes with named threads
  ...

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (64 commits)
  cpu: Export cpu_up()
  rcu: Apply ACCESS_ONCE() to rcu_boost() return value
  Revert "rcu: Permit rt_mutex_unlock() with irqs disabled"
  docs: Additional LWN links to RCU API
  rcu: Augment rcu_batch_end tracing for idle and callback state
  rcu: Add rcutorture tests for srcu_read_lock_raw()
  rcu: Make rcutorture test for hotpluggability before offlining CPUs
  driver-core/cpu: Expose hotpluggability to the rest of the kernel
  rcu: Remove redundant rcu_cpu_stall_suppress declaration
  rcu: Adaptive dyntick-idle preparation
  rcu: Keep invoking callbacks if CPU otherwise idle
  rcu: Irq nesting is always 0 on rcu_enter_idle_common
  rcu: Don't check irq nesting from rcu idle entry/exit
  rcu: Permit dyntick-idle with callbacks pending
  rcu: Document same-context read-side constraints
  rcu: Identify dyntick-idle CPUs on first force_quiescent_state() pass
  rcu: Remove dynticks false positives and RCU failures
  rcu: Reduce latency of rcu_prepare_for_idle()
  rcu: Eliminate RCU_FAST_NO_HZ grace-period hang
  rcu: Avoid needlessly IPIing CPUs at GP end
  ...

* 'core-printk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  printk, lockdep: Switch to tracked irq ops
  printk, lockdep: Remove superfluous preempt_disable()
  printk, lockdep: Disable lock debugging on zap_locks()

* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  memblock: Reimplement memblock allocation using reverse free area iterator
  memblock: Kill early_node_map[]
  score: Use HAVE_MEMBLOCK_NODE_MAP
  s390: Use HAVE_MEMBLOCK_NODE_MAP
  mips: Use HAVE_MEMBLOCK_NODE_MAP
  ia64: Use HAVE_MEMBLOCK_NODE_MAP
  SuperH: Use HAVE_MEMBLOCK_NODE_MAP
  sparc: Use HAVE_MEMBLOCK_NODE_MAP
  powerpc: Use HAVE_MEMBLOCK_NODE_MAP
  memblock: Implement memblock_add_node()
  memblock: s/memblock_analyze()/memblock_allow_resize()/ and update users
  memblock: Track total size of regions automatically
  powerpc: Cleanup memblock usage
  memblock: Reimplement memblock_enforce_memory_limit() using __memblock_remove()
  memblock: Make memblock functions handle overflowing range @size
  memblock: Reimplement __memblock_remove() using memblock_isolate_range()
  memblock: Separate out memblock_isolate_range() from memblock_set_node()
  memblock: Kill memblock_init()
  memblock: Kill sentinel entries at the end of static region arrays
  memblock: Add __memblock_dump_all()
  ...

* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  lockdep/waitqueues: Add better annotation
  lockdep, bug: Exclude TAINT_OOT_MODULE from disabling lock debugging
  lockdep: Print lock name in lockdep_init_error()
  init/main.c: Execute lockdep_init() as early as possible
  lockdep, kmemcheck: Annotate ->lock in lockdep_init_map()
  lockdep, rtmutex, bug: Show taint flags on error
  lockdep, bug: Exclude TAINT_FIRMWARE_WORKAROUND from disabling lockdep
  lockdep: Always try to set ->class_cache in register_lock_class() lockdep_init_map()

* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Use debugobjects to catch deletion of uninitialized timers
  timer: Setup uninitialized timer with a stub callback
  debugobjects: Extend to assert that an object is initialized
  debugobjects: Be smarter about static objects

We're doing some odd things there, which already messes up various users
(see the net/socket.c code that this removes), and it was going to add
yet more crud to the block layer because of the incorrect error code
translation.

ENOIOCTLCMD is not an error return that should be returned to user mode
from the "ioctl()" system call, but it should *not* be translated as
EINVAL ("Invalid argument").  It should be translated as ENOTTY
("Inappropriate ioctl for device").

That EINVAL confusion has apparently so permeated some code that the
block layer actually checks for it, which is sad.  We continue to do so
for now, but add a big comment about how wrong that is, and we should
remove it entirely eventually.  In the meantime, this tries to keep the
changes localized to just the EINVAL -> ENOTTY fix, and removing code
that makes it harder to do the right thing.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  fix CAN MAINTAINERS SCM tree type
  mwifiex: fix crash during simultaneous scan and connect
  b43: fix regression in PIO case
  ath9k: Fix kernel panic in AR2427 in AP mode
  CAN MAINTAINERS update
  net: fsl: fec: fix build for mx23-only kernel
  sch_qfq: fix overflow in qfq_update_start()
  Revert "Bluetooth: Increase HCI reset timeout in hci_dev_do_close"

bitmap size sanity checks should be done *before* allocating ->s_root;
there their cleanup on failure would be correct.  As it is, we do iput()
on root inode, but leak the root dentry...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the temporary simple fix for 3.2, we need more changes in this
area.

1. do_signal_stop() assumes that the running untraced thread in the
   stopped thread group is not possible. This was our goal but it is
   not yet achieved: a stopped-but-resumed tracee can clone the running
   thread which can initiate another group-stop.

   Remove WARN_ON_ONCE(!current->ptrace).

2. A new thread always starts with ->jobctl = 0. If it is auto-attached
   and this group is stopped, __ptrace_unlink() sets JOBCTL_STOP_PENDING
   but JOBCTL_STOP_SIGMASK part is zero, this triggers WANR_ON(!signr)
   in do_jobctl_trap() if another debugger attaches.

   Change __ptrace_unlink() to set the artificial SIGSTOP for report.

   Alternatively we could change ptrace_init_task() to copy signr from
   current, but this means we can copy it for no reason and hide the
   possible similar problems.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>		[3.1]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Test-case:

	int main(void)
	{
		int pid, status;

		pid = fork();
		if (!pid) {
			for (;;) {
				if (!fork())
					return 0;
				if (waitpid(-1, &status, 0) < 0) {
					printf("ERR!! wait: %m\n");
					return 0;
				}
			}
		}

		assert(ptrace(PTRACE_ATTACH, pid, 0,0) == 0);
		assert(waitpid(-1, NULL, 0) == pid);

		assert(ptrace(PTRACE_SETOPTIONS, pid, 0,
					PTRACE_O_TRACEFORK) == 0);

		do {
			ptrace(PTRACE_CONT, pid, 0, 0);
			pid = waitpid(-1, NULL, 0);
		} while (pid > 0);

		return 1;
	}

It fails because ->real_parent sees its child in EXIT_DEAD state
while the tracer is going to change the state back to EXIT_ZOMBIE
in wait_task_zombie().

The offending commit is 823b018e which moved the EXIT_DEAD check,
but in fact we should not blame it. The original code was not
correct as well because it didn't take ptrace_reparented() into
account and because we can't really trust ->ptrace.

This patch adds the additional check to close this particular
race but it doesn't solve the whole problem. We simply can't
rely on ->ptrace in this case, it can be cleared if the tracer
is multithreaded by the exiting ->parent.

I think we should kill EXIT_DEAD altogether, we should always
remove the soon-to-be-reaped child from ->children or at least
we should never do the DEAD->ZOMBIE transition. But this is too
complex for 3.2.
Reported-and-tested-by: Denys Vlasenko <vda.linux@googlemail.com>
Tested-by: Lukasz Michalik <lmi@ift.uni.wroc.pl>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>		[3.0+]
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.samba.org/sfrench/cifs-2.6:
  [CIFS] default ntlmv2 for cifs mount delayed to 3.3
  cifs: fix bad buffer length check in coalesce_t2

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem

This reverts commit 93b2ec01.

The call to "schedule_work()" in rtc_initialize_alarm() happens too
early, and can cause oopses at bootup

Neil Brown explains why we do it:

  "If you set an alarm in the future, then shutdown and boot again after
   that time, then you will end up with a timer_queue node which is in
   the past.

   When this happens the queue gets stuck.  That entry-in-the-past won't
   get removed until and interrupt happens and an interrupt won't happen
   because the RTC only triggers an interrupt when the alarm is "now".

   So you'll find that e.g.  "hwclock" will always tell you that
   'select' timed out.

   So we force the interrupt work to happen at the start just in case."

and has a patch that convert it to do things in-process rather than with
the worker thread, but right now it's too late to play around with this,
so we just revert the patch that caused problems for now.
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Requested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Requested-by: John Stultz <john.stultz@linaro.org>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It appears about all functions in arch/x86/lib/atomic64_cx8_32.S
are wrong in case cmpxchg8b must be restarted, because
LOCK_PREFIX macro defines a label "1" clashing with other local
labels :

1:
	some_instructions
	LOCK_PREFIX
	cmpxchg8b (%ebp)
	jne 1b  / jumps to beginning of LOCK_PREFIX !

A possible fix is to use a magic label "672" in LOCK_PREFIX asm
definition, similar to the "671" one we defined in
LOCK_PREFIX_HERE.
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Jan Beulich <JBeulich@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1325608540.2320.103.camel@edumazet-HP-Compaq-6005-Pro-SFF-PCSigned-off-by: Ingo Molnar <mingo@elte.hu>

Just like the per-CPU ones they had several
problems/shortcomings:

Only the first memory operand was mentioned in the asm()
operands, and the 2x64-bit version didn't have a memory clobber
while the 2x32-bit one did. The former allowed the compiler to
not recognize the need to re-load the data in case it had it
cached in some register, while the latter was overly
destructive.

The types of the local copies of the old and new values were
incorrect (the types of the pointed-to variables should be used
here, to make sure the respective old/new variable types are
compatible).

The __dummy/__junk variables were pointless, given that local
copies of the inputs already existed (and can hence be used for
discarded outputs).

The 32-bit variant of cmpxchg_double_local() referenced
cmpxchg16b_local().

At once also:

 - change the return value type to what it really is: 'bool'
 - unify 32- and 64-bit variants
 - abstract out the common part of the 'normal' and 'local' variants
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F01F12A020000780006A19B@nat28.tlf.novell.comSigned-off-by: Ingo Molnar <mingo@elte.hu>

Merge reason: Update from -rc4 to -rc7.
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Turned out the ntlmv2 (default security authentication)
upgrade was harder to test than expected, and we ran
out of time to test against Apple and a few other servers
that we wanted to.  Delay upgrade of default security
from ntlm to ntlmv2 (on mount) to 3.3.  Still works
fine to specify it explicitly via "sec=ntlmv2" so this
should be fine.
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <smfrench@gmail.com>

The current check looks to see if the RFC1002 length is larger than
CIFSMaxBufSize, and fails if it is. The buffer is actually larger than
that by MAX_CIFS_HDR_SIZE.

This bug has been around for a long time, but the fact that we used to
cap the clients MaxBufferSize at the same level as the server tended
to paper over it. Commit c974befa changed that however and caused this
bug to bite in more cases.
Reported-and-Tested-by: Konstantinos Skarlatos <k.skarlatos@gmail.com>
Tested-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>

This reverts commit c0afabd3.

It causes failures on Toshiba laptops - instead of disabling the alarm,
it actually seems to enable it on the affected laptops, resulting in
(for example) the laptop powering on automatically five minutes after
shutdown.

There's a patch for it that appears to work for at least some people,
but it's too late to play around with this, so revert for now and try
again in the next merge window.

See for example

	http://bugs.debian.org/652869

Reported-and-bisected-by: Andreas Friedrich <afrie@gmx.net> (Toshiba Tecra)
Reported-by: Antonio-M. Corbi Bellot <antonio.corbi@ua.es> (Toshiba Portege R500)
Reported-by: Marco Santos <marco.santos@waynext.com> (Toshiba Portege Z830)
Reported-by: Christophe Vu-Brugier <cvubrugier@yahoo.fr>  (Toshiba Portege R830)
Cc: Jonathan Nieder <jrnieder@gmail.com>
Requested-by: John Stultz <john.stultz@linaro.org>
Cc: stable@kernel.org  # for the versions that applied this
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfork parent uninterruptibly and unkillably waits for its child to
exec/exit. This wait is of unbounded length. Ignore such waits
in the hung_task detector.
Signed-off-by: Mandeep Singh Baines <msb@chromium.org>
Reported-by: Sasha Levin <levinsasha928@gmail.com>
LKML-Reference: <1325344394.28904.43.camel@lappy>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 1e39f384 ("evm: fix build problems") makes the stub version
of security_old_inode_init_security() return 0 when CONFIG_SECURITY is
not set.

But that makes callers such as reiserfs_security_init() assume that
security_old_inode_init_security() has set name, value, and len
arguments properly - but security_old_inode_init_security() left them
uninitialized which then results in interesting failures.

Revert security_old_inode_init_security() to the old behavior of
returning EOPNOTSUPP since both callers (reiserfs and ocfs2) handle this
just fine.

[ Also fixed the S_PRIVATE(inode) case of the actual non-stub
  security_old_inode_init_security() function to return EOPNOTSUPP
  for the same reason, as pointed out by Mimi Zohar.

  It got incorrectly changed to match the new function in commit
  fb88c2b6: "evm: fix security/security_old_init_security return
  code".   - Linus ]
Reported-by: Jorge Bastos <mysql.jorge@decimal.pt>
Acked-by: James Morris <jmorris@namei.org>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As pointed out by Joe Perches the SCM tree type was missing in my patch.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>

CC: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
CC: Urs Thuermann <urs.thuermann@volkswagen.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: linux-can@vger.kernel.org

If 'iw connect' command is fired when driver is already busy in
serving 'iw scan' command, ssid specific scan operation for connect
is skipped. In this case cmd wait queue handler gets called with no
command in queue (i.e. adapter->cmd_queued = NULL).

This patch adds a NULL check in mwifiex_wait_queue_complete()
routine to fix crash observed during simultaneous scan and assoc
operations.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

This patch fixes the regression, introduced by

commit 17030f48
From: Rafał Miłecki <zajec5@gmail.com>
Date: Thu, 11 Aug 2011 17:16:27 +0200
Subject: [PATCH] b43: support new RX header, noticed to be used in 598.314+ fw

in PIO case.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

don't do aggregation related stuff for 'AP mode client power save
handling' if aggregation is not enabled in the driver, otherwise it
will lead to panic because those data structures won't be never
intialized in 'ath_tx_node_init' if aggregation is disabled

	EIP is at ath_tx_aggr_wakeup+0x37/0x80 [ath9k]
	EAX: e8c09a20 EBX: f2a304e8 ECX: 00000001 EDX: 00000000
	ESI: e8c085e0 EDI: f2a304ac EBP: f40e1ca4 ESP: f40e1c8c
	DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
	Process swapper/1 (pid: 0, ti=f40e0000 task=f408e860
	task.ti=f40dc000)
	Stack:
	0001e966 e8c09a20 00000000 f2a304ac e8c085e0 f2a304ac
	f40e1cb0 f8186741
	f8186700 f40e1d2c f922988d f2a304ac 00000202 00000001
	c0b4ba43 00000000
	0000000f e8eb75c0 e8c085e0 205b0001 34383220 f2a304ac
	f2a30000 00010020
	Call Trace:
	[<f8186741>] ath9k_sta_notify+0x41/0x50 [ath9k]
	[<f8186700>] ? ath9k_get_survey+0x110/0x110 [ath9k]
	[<f922988d>] ieee80211_sta_ps_deliver_wakeup+0x9d/0x350
	[mac80211]
	[<c018dc75>] ? __module_address+0x95/0xb0
	[<f92465b3>] ap_sta_ps_end+0x63/0xa0 [mac80211]
	[<f9246746>] ieee80211_rx_h_sta_process+0x156/0x2b0
	[mac80211]
	[<f9247d1e>] ieee80211_rx_handlers+0xce/0x510 [mac80211]
	[<c018440b>] ? trace_hardirqs_on+0xb/0x10
	[<c056936e>] ? skb_queue_tail+0x3e/0x50
	[<f9248271>] ieee80211_prepare_and_rx_handle+0x111/0x750
	[mac80211]
	[<f9248bf9>] ieee80211_rx+0x349/0xb20 [mac80211]
	[<f9248949>] ? ieee80211_rx+0x99/0xb20 [mac80211]
	[<f818b0b8>] ath_rx_tasklet+0x818/0x1d00 [ath9k]
	[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
	[<f8187a75>] ? ath9k_tasklet+0x35/0x1c0 [ath9k]
	[<f8187b33>] ath9k_tasklet+0xf3/0x1c0 [ath9k]
	[<c0151b7e>] tasklet_action+0xbe/0x180

Cc: stable@kernel.org
Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com>
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Reported-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Tested-by: Ashwin Mendonca <ashwinloyal@gmail.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Update the CAN MAINTAINERS section:

- point out active maintainers
- pull the CAN driver discussion away from netdev ML
- point to the new CAN web site on gitorious.org
- add CAN development git repository URL to submit patches
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>

CC: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
CC: Urs Thuermann <urs.thuermann@volkswagen.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: linux-can@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

If one only selects mx23-based boards, compile fails:

drivers/net/ethernet/freescale/fec.c:410:2: error: 'FEC_HASH_TABLE_HIGH' undeclared (first use in this function)
drivers/net/ethernet/freescale/fec.c:411:2: error: 'FEC_HASH_TABLE_LOW' undeclared (first use in this function)

This is because fec.h uses CONFIG_SOC_IMX28 to determine the register
layout of the core which makes sense since the MX23 does not have a fec.
However, Kconfig uses the broader ARCH_MXS symbol and this way even
makes the fec-driver default for MX23. Adapt Kconfig to use the more
precise SOC_IMX28 as well.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: David S. Miller <davem@davemloft.net>
Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

grp->slot_shift is between 22 and 41, so using 32bit wide variables is
probably a typo.

This could explain QFQ hangs Dave reported to me, after 2^23 packets ?

(23 = 64 - 41)
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Dave Taht <dave.taht@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The --host option certainly enables host-data collection.

Cc: Avi Kivity <avi@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1317816084-18026-5-git-send-email-gleb@redhat.comSigned-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>