Older versions of gcc had issues with using -maltivec together with
-mcpu of a non altivec capable CPU. We work around it by specifying
-mcpu=970, but the logic is complicated.

In preparation for adding more -mcpu targets, remove the workaround
and just require gcc 4.0 for 64-bit builds.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Remove CONFIG_POWER4_ONLY, the option is badly named and only does two
things:

- It wraps the MMU segment table code. With feature fixups there is
  little downside to compiling this in.

- It uses the newer mtocrf instruction in various assembly functions.
  Instead of making this a compile option just do it at runtime via
  a feature fixup.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This replaces the old therm_pm72 using the same windfarm infrastructure
that was used for other PowerMac G5 models. The fan speeds and sensors
should now be visible in the same location in sysfs.

The driver is split into separate core modules for PowerMac7,2 (and 7,3)
and RackMac3,1, with a lot of the shared code now in the separate sensor
and control modules.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The FCU operates the fans on the earlier generation G5 machines,
this module will be used by upcoming windfarm drivers.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This allows those modules to load on PowerMac7,2 PowerMac7,3
and RackMac3,1 and add the sensor name conversion for those
machines.

This will be used by the corresponding new windfarm modules
for those machines.

Note that since therm_pm72 is linked first, it will still
take priority on those i2c devices if built-in. If using modules
it will depend which is loaded first, but you should avoid building
therm_pm72 if you are using the new windfarm drivers
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

For use by the upcoming windfarm_rm31
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

For user by the upcoming windfarm_pm72 and windfarm_rm31
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Makes the code more readable
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Controls registered as RPM and PWM fans are now displayed
with the "RPM" or "%" suffix respectively to make it
clearer to the user what the value actually means since
the fan type isn't otherwise obvious.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The windfarm core will do it, so this is a duplicate.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

const'ify the sensor ops and name and add a void* for use by
the control and sensor drivers to point back to their private
data, avoiding the need to create a wrapper data structure
per sensor or control instance.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This simplifies the driver to stop using the deprecated attach interface.

While at it we also implement teardown properly and fix the refcounting
by using a kref.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This simplifies the driver to stop using the deprecated attach interface
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This simplifies the driver to stop using the deprecated attach interface
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This simplifies the driver to stop using the deprecated attach interface,
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

This causes i2c-powermac to register i2c devices exposed in the
device-tree, enabling new-style probing of devices.

Note that we prefix the IDs with "MAC," in order to prevent the
generic drivers from matching. This is done on purpose as we only
want drivers specifically tested/designed to operate on powermacs
to match.

This removes the special case we had for the AMS driver, and updates
the driver's match table instead.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Add two optimisations to enable_kernel_altivec:

- enable_kernel_altivec has already determined if we need to
save the previous task's state but we call giveup_altivec
in both cases, requiring an extra branch in giveup_altivec. Create
giveup_altivec_notask which only turns on the VMX bit in the
MSR.

- We write the VMX MSR bit each time we call enable_kernel_altivec
even it was already set. Check the bit and branch out if we have
already set it. The classic case for this is vectored IO
where we have to copy multiple buffers to or from userspace.

The following testcase was used to confirm this patch improves
performance:

http://ozlabs.org/~anton/junkcode/copy_to_user.c

Since the current breakpoint for using VMX in copy_tofrom_user is
4096 bytes, I'm using buffers of 4096 + 1 cacheline (4224) bytes.
A benchmark of 16 entry readvs (-s 16):

time copy_to_user -l 4224 -s 16 -i 1000000

completes 5.2% faster on a POWER7 PS700.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Use an empty inline instead of an empty function to implement
giveup_altivec on book3e CPUs, similar to flush_altivec_to_thread.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Reformat lppaca.h to match Linux coding standards.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Remove all the iseries specific fields in the lppaca.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

We have a union containing fields from the old iseries hypervisor
that has been reused for the cede latency hint. Since we no
longer support iseries, remove the union completely.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

At the moment system call entry looks like:

crclr	so
...
mfcr	r9
...
std	r9,_CCR(r1)

commit bd19c899 ([POWERPC] system call micro optimisation) put
some space between the crclr and mfcr in order to avoid a stall.

There is still a stall seen between the mfcr and std. We can avoid
the crclr by doing it in a GPR with rlwinm which gives us more room
to better schedule the sequence.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The count register is volatile so we don't need to preserve it.
Store zero to the entry in the exception frame.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

The XER is a volatile register so there is no need to save and restore
it over a system call - zero it out in the exception stack frame
instead.

This should fix a 5 cycle stall of the mfxer/std seen on POWER7.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

syscall_dotrace_cont and syscall_error_cont tend to complicate perf
output so make them local.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Pull power management fixes from Rafael J. Wysocki:
 "Fix for an issue causing hibernation to hang on systems with highmem
  (that practically means i386) due to broken memory management (bug
  introduced in 3.2, so -stable material) and PM documentation update
  making the freezer documentation follow the code again after some
  recent updates."

* tag 'pm-for-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Freezer / Docs: Update documentation about freezing of tasks
  PM / Hibernate: fix the number of pages used for hibernate/thaw buffering

The autofs packet size has had a very unfortunate size problem on x86:
because the alignment of 'u64' differs in 32-bit and 64-bit modes, and
because the packet data was not 8-byte aligned, the size of the autofsv5
packet structure differed between 32-bit and 64-bit modes despite
looking otherwise identical (300 vs 304 bytes respectively).

We first fixed that up by making the 64-bit compat mode know about this
problem in commit a32744d4 ("autofs: work around unhappy compat
problem on x86-64"), and that made a 32-bit 'systemd' work happily on a
64-bit kernel because everything then worked the same way as on a 32-bit
kernel.

But it turned out that 'automount' had actually known and worked around
this problem in user space, so fixing the kernel to do the proper 32-bit
compatibility handling actually *broke* 32-bit automount on a 64-bit
kernel, because it knew that the packet sizes were wrong and expected
those incorrect sizes.

As a result, we ended up reverting that compatibility mode fix, and
thus breaking systemd again, in commit fcbf94b9.

With both automount and systemd doing a single read() system call, and
verifying that they get *exactly* the size they expect but using
different sizes, it seemed that fixing one of them inevitably seemed to
break the other.  At one point, a patch I seriously considered applying
from Michael Tokarev did a "strcmp()" to see if it was automount that
was doing the operation.  Ugly, ugly.

However, a prettier solution exists now thanks to the packetized pipe
mode.  By marking the communication pipe as being packetized (by simply
setting the O_DIRECT flag), we can always just write the bigger packet
size, and if user-space does a smaller read, it will just get that
partial end result and the extra alignment padding will simply be thrown
away.

This makes both automount and systemd happy, since they now get the size
they asked for, and the kernel side of autofs simply no longer needs to
care - it could pad out the packet arbitrarily.

Of course, if there is some *other* user of autofs (please, please,
please tell me it ain't so - and we haven't heard of any) that tries to
read the packets with multiple writes, that other user will now be
broken - the whole point of the packetized mode is that one system call
gets exactly one packet, and you cannot read a packet in pieces.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The file Documentation/power/freezing-of-tasks.txt was still referencing
the TIF_FREEZE flag, that was removed by the commit
d88e4cb6(freezer: remove now unused
TIF_FREEZE).

This patch removes all the references of TIF_FREEZE that were left
behind.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

The actual internal pipe implementation is already really about
individual packets (called "pipe buffers"), and this simply exposes that
as a special packetized mode.

When we are in the packetized mode (marked by O_DIRECT as suggested by
Alan Cox), a write() on a pipe will not merge the new data with previous
writes, so each write will get a pipe buffer of its own.  The pipe
buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn
will tell the reader side to break the read at that boundary (and throw
away any partial packet contents that do not fit in the read buffer).

End result: as long as you do writes less than PIPE_BUF in size (so that
the pipe doesn't have to split them up), you can now treat the pipe as a
packet interface, where each read() system call will read one packet at
a time.  You can just use a sufficiently big read buffer (PIPE_BUF is
sufficient, since bigger than that doesn't guarantee atomicity anyway),
and the return value of the read() will naturally give you the size of
the packet.

NOTE! We do not support zero-sized packets, and zero-sized reads and
writes to a pipe continue to be no-ops.  Also note that big packets will
currently be split at write time, but that the size at which that
happens is not really specified (except that it's bigger than PIPE_BUF).
Currently that limit is the system page size, but we might want to
explicitly support bigger packets some day.

The main user for this is going to be the autofs packet interface,
allowing us to stop having to care so deeply about exact packet sizes
(which have had bugs with 32/64-bit compatibility modes).  But user
space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will
fail with an EINVAL on kernels that do not support this interface.
Tested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: David Miller <davem@davemloft.net>
Cc: Ian Kent <raven@themaw.net>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: stable@kernel.org  # needed for systemd/autofs interaction fix
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull staging tree fixes from Greg Kroah-Hartman:
 "Here are some tiny drivers/staging/ bugfixes.  Some build fixes that
  were recently reported, as well as one kfree bug that is hitting a
  number of users."

* tag 'staging-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ozwpan: Fix bug where kfree is called twice.
  staging: octeon-ethernet: fix build errors by including interrupt.h
  staging: zcache: fix Kconfig crypto dependency
  staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS

Pull USB fixes from Greg Kroah-Hartman:
 "Here are a number of small USB fixes for 3.4-rc5.

  Nothing major, as before, some USB gadget fixes.  There's a crash fix
  for a number of ASUS laptops on resume that had been reported by a
  number of different people.  We think the fix might also pertain to
  other machines, as this was a BIOS bug, and they seem to travel to
  different models and manufacturers quite easily.  Other than that,
  some other reported problems fixed as well."

* tag 'usb-3.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: gadget: udc-core: fix incompatibility with dummy-hcd
  usb: gadget: udc-core: fix wrong call order
  USB: cdc-wdm: fix race leading leading to memory corruption
  USB: EHCI: fix crash during suspend on ASUS computers
  usb gadget: uvc: uvc_request_data::length field must be signed
  usb: gadget: dummy: do not call pullup() on udc_stop()
  usb: musb: davinci.c: add missing unregister
  usb: musb: drop __deprecated flag
  USB: gadget: storage gadgets send wrong error code for unknown commands
  usb: otg: gpio_vbus: Add otg transceiver events and notifiers

Pull btrfs fixes from Chris Mason:
 "This has our collection of bug fixes.  I missed the last rc because I
  thought our patches were making NFS crash during my xfs test runs.
  Turns out it was an NFS client bug fixed by someone else while I tried
  to bisect it.

  All of these fixes are small, but some are fairly high impact.  The
  biggest are fixes for our mount -o remount handling, a deadlock due to
  GFP_KERNEL allocations in readdir, and a RAID10 error handling bug.

  This was tested against both 3.3 and Linus' master as of this morning."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (26 commits)
  Btrfs: reduce lock contention during extent insertion
  Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir
  Btrfs: Fix space checking during fs resize
  Btrfs: fix block_rsv and space_info lock ordering
  Btrfs: Prevent root_list corruption
  Btrfs: fix repair code for RAID10
  Btrfs: do not start delalloc inodes during sync
  Btrfs: fix that check_int_data mount option was ignored
  Btrfs: don't count CRC or header errors twice while scrubbing
  Btrfs: fix btrfs_ioctl_dev_info() crash on missing device
  btrfs: don't return EINTR
  Btrfs: double unlock bug in error handling
  Btrfs: always store the mirror we read the eb from
  fs/btrfs/volumes.c: add missing free_fs_devices
  btrfs: fix early abort in 'remount'
  Btrfs: fix max chunk size check in chunk allocator
  Btrfs: add missing read locks in backref.c
  Btrfs: don't call free_extent_buffer twice in iterate_irefs
  Btrfs: Make free_ipath() deal gracefully with NULL pointers
  Btrfs: avoid possible use-after-free in clear_extent_bit()
  ...

Pull ARM SoC fixes from Olof Johansson:
 "Nothing controversial, just another batch of fixes:

   - Samsung/exynos fixes for more merge window fallout: build errors
     and warnings mostly, but also some clock/device setup issues on
     exynos4/5
   - PXA bug and warning fixes related to gpio and pinmux
   - IRQ domain conversion bugfixes for U300 and MSM
   - A regulator setup fix for U300"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PXA2xx: MFP: fix potential direction bug
  ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT
  arm/sa1100: fix sa1100-rtc memory resource
  ARM: pxa: fix gpio wakeup setting
  ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability
  ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined
  ARM: EXYNOS: Fix resource on dev-dwmci.c
  ARM: S3C24XX: Fix build warning for S3C2410_PM
  ARM: mini2440_defconfig: Fix build error
  ARM: msm: Fix gic irqdomain support
  ARM: EXYNOS: Fix incorrect initialization of GIC
  ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers
  ARM: u300: bump all IRQ numbers by one
  ARM: ux300: Fix unimplementable regulation constraints

Pull drm fixes from Dave Airlie:
 "As soon as I sent the non-urgent stack, two important fixes come in:

   - i915: fixes SNB GPU hangs in a number of 3D apps

   - radeon: initial fix for VGA on LLano system, 3 or 4 of us have
     spent time debugging this, and Jerome finally figured out the magic
     bit the BIOS/fglrx set that we didn't.  This at least should get
     things working, there may be future reliability fixes."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Set the Stencil Cache eviction policy to non-LRA mode.
  drm/radeon/kms: need to set up ss on DP bridges as well

This reverts commit a32744d4.

While that commit was technically the right thing to do, and made the
x86-64 compat mode work identically to native 32-bit mode (and thus
fixing the problem with a 32-bit systemd install on a 64-bit kernel), it
turns out that the automount binaries had workarounds for this compat
problem.

Now, the workarounds are disgusting: doing an "uname()" to find out the
architecture of the kernel, and then comparing it for the 64-bit cases
and fixing up the size of the read() in automount for those.  And they
were confused: it's not actually a generic 64-bit issue at all, it's
very much tied to just x86-64, which has different alignment for an
'u64' in 64-bit mode than in 32-bit mode.

But the end result is that fixing the compat layer actually breaks the
case of a 32-bit automount on a x86-64 kernel.

There are various approaches to fix this (including just doing a
"strcmp()" on current->comm and comparing it to "automount"), but I
think that I will do the one that teaches pipes about a special "packet
mode", which will allow user space to not have to care too deeply about
the padding at the end of the autofs packet.

That change will make the compat workaround unnecessary, so let's revert
it first, and get automount working again in compat mode.  The
packetized pipes will then fix autofs for systemd.
Reported-and-requested-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Ian Kent <raven@themaw.net>
Cc: stable@kernel.org # for 3.3
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in
OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when
using separate stencil buffers.  Without it, the GPU tries to use the
LRA eviction policy, which isn't supported.  This was supposed to be off
by default, but seems to be on for many machines.

This cannot be done in gen6_init_clock_gating with most of the other
workaround bits; the render ring needs to exist.  Otherwise, the
register write gets dropped on the floor (one printk will show it
changed, but a second printk immediately following shows the value
reverts to the old one).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535
Cc: stable@vger.kernel.org
Cc: Rob Castle <futuredub@gmail.com>
Cc: Eric Appleman <erappleman@gmail.com>
Cc: aaron667@gmx.net
Cc: Keith Packard <keithp@keithp.com>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Makes Nutmeg DP to VGA bridges work for me.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=42490

Noticed by Jerome Glisse (after weeks of debugging).
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  Use correct conversion specifiers in cifs_show_options
  CIFS: Show backupuid/gid in /proc/mounts
  cifs: fix offset handling in cifs_iovec_write