Merge tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Few late SoC changes for v5.5 merge window

These changes just clean up few typos, and there is one non-critical
correction of missing put_device() after calling of_platform_populate()
for display controller.

Naturally none of this is urgent and can be merged when suitable.

* tag 'omap-for-v5.5/soc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
  OMAP2: fixup doc comments in omap_device
  ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
  ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")

Link: https://lore.kernel.org/r/pull-1573579927-542764@atomide.com-2Signed-off-by: Olof Johansson <olof@lixom.net>

A coccicheck run provided information like the following.

arch/arm/mach-omap2/display.c:268:2-8: ERROR: missing put_device;
call of_find_device_by_node on line 258, but without a corresponding
object release within this function.

Generated by: scripts/coccinelle/free/put_device.cocci

Thus add the missed function call to fix the exception handling for
this function implementation.

Fixes: e0c827ac ("drm/omap: Populate DSS children in omapdss driver")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The documentation comments in this file are out of
date with the code, so fix this to avoid the
following warnings:

arch/arm/mach-omap2/omap_device.c:133: warning: Function parameter or member 'pdev' not described in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_name' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdev_id' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'oh' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:133: warning: Excess function parameter 'pdata_len' description in 'omap_device_build_from_dt'
arch/arm/mach-omap2/omap_device.c:309: warning: Function parameter or member 'pdev' not described in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:309: warning: Excess function parameter 'od' description in 'omap_device_get_context_loss_count'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'ohs' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Function parameter or member 'oh_cnt' not described in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'oh' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:335: warning: Excess function parameter 'pdata_len' description in 'omap_device_alloc'
arch/arm/mach-omap2/omap_device.c:659: warning: Function parameter or member 'pdev' not described in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:659: warning: Excess function parameter 'od' description in 'omap_device_register'
arch/arm/mach-omap2/omap_device.c:682: warning: Function parameter or member 'pdev' not described in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:682: warning: Excess function parameter 'od' description in 'omap_device_enable'
arch/arm/mach-omap2/omap_device.c:713: warning: Function parameter or member 'pdev' not described in 'omap_device_idle'
arch/arm/mach-omap2/omap_device.c:713: warning: Excess function parameter 'od' description in 'omap_device_idle'
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All of arch/arm/mach-omap1/Kconfig is enclosed in a big "if ARCH_OMAP1"
and so every symbol already has a dependency on ARCH_OMAP1 even without
mentioning it in their list of dependencies.

Also dependencies on ARCH_OMAP can be dropped as it is selected by
ARCH_OMAP1.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC update for 5.5:
 - Add arm64 Kconfig option for the NXP S32 platform.
 - Drop imx_anatop_usb_chrg_detect_disable() function which becomes
   unneeded, since all the necessary charger setup is done by the USB
   PHY driver now.
 - Add serial number support for i.MX6/7 SoCs by reading 64-bit SoC
   unique ID from OCOTP block.
 - Replace i.MX machine specific coherency exit implementation using
   the generic v7_exit_coherency_flush() function.

* tag 'imx-soc-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: use generic function to exit coherency
  ARM: imx: Add serial number support for i.MX6/7 SoCs
  ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
  arm64: Introduce config for S32

Link: https://lore.kernel.org/r/20191105150315.15477-2-shawnguo@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-soc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.5

1. Minor cleanups in S3C platforms,
2. Enable newly added EXYNOS_ASV (Adaptive Supply Voltage) driver.

* tag 'samsung-soc-5.5' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS
  ARM: s3c: Rename s5p_usb_phy functions
  ARM: s3c: Rename s3c64xx_spi_setname() function

Link: https://lore.kernel.org/r/20191104175902.12224-2-krzk@kernel.orgSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.5-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/soc

ARM: tegra: Core changes for v5.5-rc1

Contains two fixes for CPU idle and suspend/resume on early Tegra SoCs.

* tag 'tegra-for-5.5-arm-core' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: tegra: Use WFE for power-gating on Tegra30
  ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()

Link: https://lore.kernel.org/r/20191102144521.3863321-5-thierry.reding@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-soc-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/soc

Renesas ARM SoC updates for v5.5

  - Drop legacy DT clock support on R-Car Gen2.

* tag 'renesas-arm-soc-for-v5.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: shmobile: rcar-gen2: Drop legacy DT clock support

Link: https://lore.kernel.org/r/20191101155842.31467-3-geert+renesas@glider.beSigned-off-by: Olof Johansson <olof@lixom.net>

Increase the max number of GPIOs from default 512 to 1024 for ASPEED
platforms, because Facebook Yamp (AST2500) BMC platform has total 594
GPIO pins (232 provided by ASPEED SoC, and 362 by I/O Expanders).

Link: https://lore.kernel.org/r/20191031014040.12898-1-rentao.bupt@gmail.comSigned-off-by: Tao Ren <rentao.bupt@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: mach-hisi: Hisilicon SoC updates for 5.5

- drop the ARCH_MULTI_V7 dependency in the sub-menu of ARCH_HISI
  since ARCH_HISI depends on ARCH_MULTI_V7

* tag 'hisi-armv7-soc-for-5.5' of git://github.com/hisilicon/linux-hisi:
  ARM: hisi: drop useless depend on ARCH_MULTI_V7

Link: https://lore.kernel.org/r/5DB9593D.9050904@hisilicon.comSigned-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'realtek-arm64-soc-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek into arm/soc

Realtek ARM64 based SoC for v5.5

Enable reset controllers and add a mailing list to MAINTAINERS.

* tag 'realtek-arm64-soc-for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-realtek:
  arm64: realtek: Select reset controller
  MAINTAINERS: Add mailing list for Realtek SoCs

Link: https://lore.kernel.org/r/20191030041000.31848-1-afaerber@suse.deSigned-off-by: Olof Johansson <olof@lixom.net>

The common ARM architecture code provides a generic function to exit
coherency called v7_exit_coherency_flush(). Replace the machine
specific implementation using the generic function.

Tested on a i.MX 6Dual by hotplugging the secondary CPU under load
through sysfs several 1000 times.
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Turned out that WFI doesn't work reliably on Tegra30 as a trigger for
the power-gating, it causes CPU hang under some circumstances like having
memory controller running of PLLP. The TRM doc states that WFI should be
used for the Big-Little "Cluster Switch", while WFE for the power-gating.
Hence let's use the WFE for CPU0 power-gating, like it is done for the
power-gating of a secondary cores. This fixes CPU hang after entering LP2
with memory running off PLLP.
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

There is an unfortunate typo in the code that results in writing to
FLOW_CTLR_HALT instead of FLOW_CTLR_CSR.

Cc: <stable@vger.kernel.org>
Acked-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Enable exynos-asv driver for Exynos 32-bit SoCs.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The name s5p_usb_phy_init() suggests it is shared with S5Pv210 platform,
but it is not.  It is specific to S3C64xx, so make it clear in the
name.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

The name s3c64xx_spi_setname() suggests it is shared with S3C64xx
platform, but except of contents it is not.  It is called only by
S3C24xx code, so make it clear in the name.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

i.MX6/7 SoCs have a 64-bit SoC unique ID stored in OCOTP,
it can be used as SoC serial number, add this support for
i.MX6Q/6DL/6SL/6SX/6SLL/6UL/6ULL/6ULZ/7D, see below example
on i.MX6Q:

root@imx6qpdlsolox:~# cat /sys/devices/soc0/serial_number
240F31D4E1FDFCA7
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

With commit b5bbe223 ("usb: phy: mxs: Disable external charger
detect in mxs_phy_hw_init()") in tree all of the necessary charger
setup is done by the USB PHY driver which covers all of the affected
i.MX6 SoCs.

NOTE: imx_anatop_usb_chrg_detect_disable() was also called for i.MX7D,
but looking at its datasheet it appears to have a different USB PHY IP
block, so executing i.MX6 charger disable configuration seems
unnecessary.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: linux-imx@nxp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add configuration option for the NXP S32 platform family in
Kconfig.platforms. For starters, the only SoC supported will be Treerunner
(S32V234), with a single execution target: the S32V234-EVB (rev 29288)
board.
Signed-off-by: Mihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: Stoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The ARCH_HISI depends on ARCH_MULTI_V7, no need to add this depend
to each sub-menu config, and use tabs where possible.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>

Select RESET_CONTROLLER for ARCH_REALTEK.
Signed-off-by: Andreas Färber <afaerber@suse.de>

As of commit 362b334b ("ARM: dts: r8a7791: Convert to new
CPG/MSSR bindings"), all upstream R-Car Gen2 device tree source files
use the unified "Renesas Clock Pulse Generator / Module Standby and
Software Reset" DT bindings.

Hence remove backward compatibility with old R-Car Gen2 device trees
describing a hierarchical representation of the various CPG and MSTP
clocks.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191016150939.30620-1-geert+renesas@glider.be

Merge tag 'omap-for-v5.5/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

SoC changes for omaps for v5.5

This series of changes contains SoC related clean-up, and some PM
improvments:

- SoC clean-up to drop unused enable_wakeup and disable_wakeup,
  simplify clkdm_clock_enable and disable, and few sparse fixes

- Drop pdata-quirks for TI bluetooth, this is now handled by a serdev
  driver

- A series of PM changes to re-enable core oswr (open switch retention)
  for omap4 that got disabled earlier because of various gpio-omap issues
  that have been fixed earlier this year. We want to do this in small
  steps for the pwrdm_set_logic_retst() changes so we can identify the
  domain in case of unexpected issues

- A series of PM changes to configure voltage controller for droid4.
  Eventually the voltage controller configuration should use device tree,
  but we want to get things working first. These changes bring down
  down the idle power consumption for droid4 with LCD blanked, WLAN
  connected, USB disabled, and modem disabled to about 32 to 35mW from
  about 39 to 45 mW

* tag 'omap-for-v5.5/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (24 commits)
  ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c
  ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
  ARM: OMAP2+: make omap44xx_sha0_hwmod and omap44xx_l3_main_2__des static
  ARM: OMAP2+: prm44xx: make prm_{save,restore}_context static
  ARM: OMAP2+: make dra7xx_sha0_hwmod static
  ARM: OMAP2+: do not export am43xx_control functions
  ARM: OMAP2+: Configure voltage controller for cpcap to low-speed
  ARM: OMAP2+: Configure voltage controller for retention
  ARM: OMAP2+: Make some functions static
  ARM: OMAP2+: Simplify code for clkdm_clock_enable and disable
  ARM: OMAP2+: Drop unused enable_wakeup and disable_wakeup
  ARM: OMAP2+: Initialize voltage controller for omap4
  ARM: OMAP2+: Allow core oswr for omap4
  ARM: OMAP2+: Allow per oswr for omap4
  ARM: OMAP2+: Configure voltage controller for cpcap
  ARM: OMAP2+: Update 4430 voltage controller operating points
  ARM: OMAP2+: Remove bogus warnings for machines without twl PMIC
  ARM: OMAP2+: Drop bogus wkup domain oswr setting
  ARM: OMAP2+: Remove unused wakeup_cpu
  ARM: dts: Use level interrupt for omap4 & 5 wlcore
  ...

Link: https://lore.kernel.org/r/pull-1571934890-285615@atomide.comSigned-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs machine/Kconfig
updates for 5.5, please pull the following:

- Stefan adds a machine descriptor for BCM2711 (Raspberry Pi 4) which
  sets up the appropriate DMA aperture for the Pi peripherals to work
  (1GB window at 3GB offset)

- Ben fixes a number of sparse warnings for the Kona SMC code and the
  BCM2836 SMP code

* tag 'arm-soc/for-5.5/soc' of https://github.com/Broadcom/stblinux:
  ARM: bcm: fix missing __iomem in bcm_kona_smc.c
  ARM: bcm: include local platsmp.h for bcm2836_smp_ops
  ARM: bcm: Add support for BCM2711 SoC

Link: https://lore.kernel.org/r/20191023212814.30622-4-f.fainelli@gmail.comSigned-off-by: Olof Johansson <olof@lixom.net>

Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix a typo ("Initiaize").
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Message-Id: <20191002145301.11332-1-j.neuschaefer@gmx.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

All TI_ST users have been migrated to the new serdev based HCILL
bluetooth driver. That driver is initialized from DT and does not
need any platform quirks.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'mmp-soc-for-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp into arm/soc

ARM: Marvell MMP SoC patches for v5.5

This tag includes initial support for the Marvell MMP3 processor.
MMP3 is used in OLPC XO-4 laptops, Panasonic Toughpad FZ-A1 tablet
and Dell Wyse 3020/Tx0D thin clients.

* tag 'mmp-soc-for-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/lkundrak/linux-mmp:
  MAINTAINERS: mmp: add Git repository
  ARM: mmp: remove MMP3 USB PHY registers from regs-usb.h
  ARM: mmp: move cputype.h to include/linux/soc/
  ARM: mmp: add SMP support
  ARM: mmp: add support for MMP3 SoC
  ARM: mmp: define MMP_CHIPID by the means of CIU_REG()
  ARM: mmp: DT: convert timer driver to use TIMER_OF_DECLARE
  ARM: mmp: map the PGU as well
  ARM: mmp: don't select CACHE_TAUROS2 on all ARCH_MMP
  ARM: l2c: add definition for FWA in PL310 aux register

Link: https://lore.kernel.org/r/3a035bed90f9d8acc49b2d11d20089b546062aea.camel@v3.skSigned-off-by: Olof Johansson <olof@lixom.net>

The omap44xx_sha0_hwmod and omap44xx_l3_main_2__des objects are
not exported so make them static to avoid the following warnings:

arch/arm/mach-omap2/omap_hwmod_44xx_data.c:793:19: warning: symbol 'omap44xx_sha0_hwmod' was not declared. Should it be static?
arch/arm/mach-omap2/omap_hwmod_44xx_data.c:977:26: warning: symbol 'omap44xx_l3_main_2__des' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The prm_{save,restore}_context functions are not exported
so make them static to avoid the following warnings:

arch/arm/mach-omap2/prm44xx.c:748:6: warning: symbol 'prm_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/prm44xx.c:759:6: warning: symbol 'prm_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The dra7xx_sha0_hwmod object is not exported outside of
omap_hwmod_7xx_data. so make it static to avoid the
following warning:

arch/arm/mach-omap2/omap_hwmod_7xx_data.c:686:19: warning: symbol 'dra7xx_sha0_hwmod' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Do not export am43xx_control_{save,restore}_context to avoid
the foloowing warnings:

arch/arm/mach-omap2/control.c:687:6: warning: symbol 'am43xx_control_save_context' was not declared. Should it be static?
arch/arm/mach-omap2/control.c:701:6: warning: symbol 'am43xx_control_restore_context' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Document linux-realtek-soc mailing list to be CC'ed on patches.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Looks like the i2c timings in high-speed mode do not work properly to
allow us to clear I2C_DISABLE bits for PRM_VOLTCTRL register and the
device reboots if I2C_DISABLE bits are cleared.

Let's configure the voltage controller i2c for low-speed mode as done in
the Motorola Mapphone Android Linux kernel. This saves us about 7mW of
power during retention compared to the high-speed values.

Let's also change the low-speed warning to pr_info about relying on the
bootloader configured low-speed values like we currently do.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Similar to existing omap3_vc_set_pmic_signaling(), let's add omap4
specific omap4_vc_set_pmic_signaling(). This allows the configured
devices to enable voltage controller for retention later on during
init.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix sparse warnings:

arch/arm/mach-omap2/pmic-cpcap.c:29:15: warning: symbol 'omap_cpcap_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:43:15: warning: symbol 'omap_cpcap_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:93:15: warning: symbol 'omap_max8952_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:107:15: warning: symbol 'omap_max8952_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:140:15: warning: symbol 'omap_fan535503_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:155:15: warning: symbol 'omap_fan535508_vsel_to_uv' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:173:15: warning: symbol 'omap_fan535503_uv_to_vsel' was not declared. Should it be static?
arch/arm/mach-omap2/pmic-cpcap.c:192:15: warning: symbol 'omap_fan535508_uv_to_vsel' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add a tree that was set up for to stage the patches for Marvell MMP SoC
support.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>