- 22 Jul, 2011 10 commits
-
-
Alexander Duyck authored
The ixgbe_maybe_stop_tx function is only a few lines long and is called multiple times through the xmit hotpath. In order to streamline things it makes sense to just inline it. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Ross Brattain <ross.b.brattain@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Alexander Duyck authored
This change is meant to update ATR so that it will use the recorded RX queue instead of the CPU in the case of routing. This change is meant to help ixgbe default behavior to more closely match that of the kernel. Signed-off-by:
-
Robert Healy authored
On this chipset it is required to configure the MPHY block for loopback tests. If MPHY is not configured then all loopback tests will report failures. Signed-off-by:
Robert Healy <robert.healy@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
-
Nicolas Schichan authored
Interrupts about link lost or rx sequence errors are not reported by the ce4100 hardware, leading to transitions from link UP to link DOWN never being reported. Signed-off-by:
Nicolas Schichan <nschichan@freebox.fr> Tested-by:
-
Thadeu Lima de Souza Cascardo authored
The function can_get_bittiming is not used anywhere else, so it should be static. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Choi, Jong-Hwan authored
Kobj and queues_kset are used with CONFIG_XPS=y. Signed-off-by:
Choi, Jong-Hwan <jhbird.choi@samsung.com> Signed-off-by:
-
Shreyas Bhatewara authored
NETIF_F_HIGHDMA is being disabled even when dma64 is true. This patch fixes it. CC: Michal Miroslaw <mirq-linux@rere.qmqm.pl> Signed-off-by:
Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by:
-
Shreyas Bhatewara authored
Parent device for netdev should be set before netdev_info() can be called otherwise there is a NULL pointer dereference and probe() fails. Signed-off-by:
-
Marek Vasut authored
This device can be found in Acer Iconia TAB W500 tablet dock. Signed-off-by:
Marek Vasut <marek.vasut@gmail.com> Signed-off-by:
-
David S. Miller authored
-
- 21 Jul, 2011 30 commits
-
-
Giuseppe CAVALLARO authored
This patch adds new information for the driver especially about its platform structure fields. Signed-off-by:
Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
Prior to this change, most PHY configuration parameters were passed into the STMMAC device as a separate PHY device. As well as being unusual, this made it difficult to make changes to the MAC/PHY relationship. This patch moves all the PHY parameters into the MAC configuration structure, mainly as a separate structure. This allows us to completely ignore the MDIO bus attached to a stmmac if desired, and not create the PHY bus. It also allows the stmmac driver to use a different PHY from the one it is connected to, for example a fixed PHY or bit banging PHY. Also derive the stmmac/PHY connection type (MII/RMII etc) from the mode can be passed into <platf>_configure_ethernet. STLinux kernel at git://git.stlinux.com/stm/linux-sh4-2.6.32.y.git provides several examples how to use this new infrastructure (that actually is easier to maintain and clearer). Signed-off-by:
Stuart Menefy <stuart.menefy@st.com> Signed-off-by:
-
Giuseppe CAVALLARO authored
The patch removes the following serie of warnings when the driver is compiled as built-in: drivers/net/stmmac/stmmac_main.c: In function stmmac_cmdline_opt: drivers/net/stmmac/stmmac_main.c:1855:12: warning: ignoring return value of kstrtoul, declared with attribute warn_unused_result [snip] Signed-off-by:
-
Giuseppe CAVALLARO authored
Signed-off-by:
-
Ben Hutchings authored
Some drivers (ab)use the ethtool_ops::get_regs operation to expose only a hardware revision ID. Commit a77f5db3 ('ethtool: Allocate register dump buffer with vmalloc()') had the side-effect of breaking these, as vmalloc() returns a null pointer for size=0 whereas kmalloc() did not. For backward-compatibility, allow zero-length dumps again. Reported-by:
Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Cc: stable@kernel.org [2.6.37+] Signed-off-by:
-
Guo-Fu Tseng authored
This patch add the missing dma_unmap(). Which solved the critical issue of system freeze on heavy load. Michal Miroslaw's rejected patch: [PATCH v2 10/46] net: jme: convert to generic DMA API Pointed out the issue also, thank you Michal. But the fix was incorrect. It would unmap needed address when low memory. Got lots of feedback from End user and Gentoo Bugzilla. https://bugs.gentoo.org/show_bug.cgi?id=373109 Thank you all. :) Cc: stable@kernel.org Signed-off-by:
Guo-Fu Tseng <cooldavid@cooldavid.org> Acked-by:
Chris Wright <chrisw@sous-sol.org> Signed-off-by:
-
Dan Carpenter authored
There are two problems: 1) "n" was allocated with alloc_skb() so we should free it with kfree_skb() instead of regular kfree(). 2) We return the freed pointer instead of NULL. Signed-off-by:
Dan Carpenter <error27@gmail.com> Reviewed-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Jiri Pirko authored
there are no users outside vlan code Signed-off-by:
Jiri Pirko <jpirko@redhat.com> Signed-off-by:
-
Jiri Pirko authored
has no users so remove it Signed-off-by:
-
Jiri Pirko authored
ndo_vlan_rx_register is no longer in use in any driver so remove it. Signed-off-by:
-
Jiri Pirko authored
Now when all devices are cleaned up, bond can be cleaned up as well - remove bond->vlgrp - remove bond_vlan_rx_register - substitute necessary occurences of vlan_group_get_device Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- kill priv->vlgrp and stmmac_vlan_rx_register (used for nothing :)) Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill card->vlangrp and qeth_l3_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill vdev->vlgrp and vxge_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and igb_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill np->vlangrp and nv_vlan_rx_register - allow to turn on/off rx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and e1000_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill pi->vlan_grp and vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atl2_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and atlx_vlan_rx_register - allow to turn on/off rx/tx vlan accel via ethtool (set_features) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill dev->vlgrp and ns83820_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill np->vlgrp and netdev_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill vptr->vlgrp and velocity_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill ap->vlgrp and ace_vlan_rx_register - enable vlan hw accel always (kill vlan ifdefs) Signed-off-by:
-
Jiri Pirko authored
- unify vlan and nonvlan rx path - kill adapter->vlgrp and ixgbevf_vlan_rx_register Signed-off-by:
-
Jiri Pirko authored
Signed-off-by:
-
