- 29 Sep, 2012 3 commits
-
-
Dmitry Monakhov authored
ext4_set_io_unwritten_flag() will increment i_unwritten counter, so once we mark end_io with EXT4_END_IO_UNWRITTEN we have to revert it back on error path. - add missed error checks to prevent counter leakage - ext4_end_io_nolock() will clear EXT4_END_IO_UNWRITTEN flag to signal that conversion finished. - add BUG_ON to ext4_free_end_io() to prevent similar leakage in future. Visible effect of this bug is that unaligned aio_stress may deadlock Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu>
-
Dmitry Monakhov authored
AIO/DIO prefix is wrong because it account unwritten extents which also may be scheduled from buffered write endio Reviewed-by:
-
Dmitry Monakhov authored
Generic inode has unused i_private pointer which may be used as cur_aio_dio storage. TODO: If cur_aio_dio will be passed as an argument to get_block_t this allow to have concurent AIO_DIO requests. Reviewed-by:Zheng Liu <wenqing.lz@taobao.com> Reviewed-by:
-
- 27 Sep, 2012 12 commits
-
-
Wei Yongjun authored
Convert cpu_to_leXX(leXX_to_cpu(E1) + E2) to use leXX_add_cpu(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Carlos Maiolino authored
When ext4_bread() returns NULL and err is set to zero, this means there is no phyical block mapped to the specified logical block number. (Previous to commit 90b0a973, err was uninitialized in this case, which caused other problems.) The directory handling routines use ext4_bread() in many places, the fact that ext4_bread() now returns NULL with err set to zero could cause problems since a number of these functions will simply return the value of err if the result of ext4_bread() was the NULL pointer, causing the caller of the function to think that the function was successful. Since directories should never contain holes, this case can only happen if the file system is corrupted. This commit audits all of the callers of ext4_bread(), and makes sure they do the right thing if a hole in a directory is found by ext4_bread(). Some ext4_bread() callers did not need any changes either because they already had its own hole detector paths. Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Theodore Ts'o authored
As discussed at the Plumber's Conference, reserve the bit 0x04 in fallocate() to prevent collisions with a commonly used out-of-tree patch which implements the no-hide-stale feature. Signed-off-by: -
Wang Sheng-Hui authored
In the check code above, if orig_start != donor_start, we would return -EINVAL. So here, orig_start should be equal with donor_start. Remove the redundant check here. Signed-off-by:
Wang Sheng-Hui <shhuiw@gmail.com> Signed-off-by:
-
Eric Sandeen authored
If the file system contains errors and it is being mounted read-only, don't clear the orphan list. We should minimize changes to the file system if it is mounted read-only. Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Jan Kara authored
ext4 users of data=journal mode with blocksize < pagesize were occasionally hitting assertion failure in jbd2_journal_commit_transaction() checking whether the transaction has at least as many credits reserved as buffers attached. The core of the problem is that when a file gets truncated, buffers that still need checkpointing or that are attached to the committing transaction are left with buffer_mapped set. When this happens to buffers beyond i_size attached to a page stradding i_size, subsequent write extending the file will see these buffers and as they are mapped (but underlying blocks were freed) things go awry from here. The assertion failure just coincidentally (and in this case luckily as we would start corrupting filesystem) triggers due to journal_head not being properly cleaned up as well. We fix the problem by unmapping buffers if possible (in lots of cases we just need a buffer attached to a transaction as a place holder but it must not be written out anyway). And in one case, we just have to bite the bullet and wait for transaction commit to finish. CC: Josef Bacik <jbacik@fusionio.com> Signed-off-by: -
Djalal Harouni authored
When the EXT4_IOC_MOVE_EXT ioctl() fails on bigalloc file systems, we should jump to the 'mext_out' label to release the donor file reference. Signed-off-by:
Djalal Harouni <tixxdz@opendz.org> Signed-off-by:
-
Lukas Czerner authored
With a minor tweaks regarding minimum extent size to discard and discarded bytes reporting the FITRIM can be enabled on bigalloc file system and it works without any problem. This patch fixes minlen handling and discarded bytes reporting to take into consideration bigalloc enabled file systems and finally removes the restriction and allow FITRIM to be used on file system with bigalloc feature enabled. Reviewed-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jan Kara authored
Code tracking when transaction needs to be committed on fdatasync(2) forgets to handle a situation when only inode's i_size is changed. Thus in such situations fdatasync(2) doesn't force transaction with new i_size to disk and that can result in wrong i_size after a crash. Fix the issue by updating inode's i_datasync_tid whenever its size is updated. CC: <stable@vger.kernel.org> # >= 2.6.32 Reported-by:
Kristian Nielsen <knielsen@knielsen-hq.org> Signed-off-by:
-
Bernd Schubert authored
ext4_special_inode_operations have their own ifdef CONFIG_EXT4_FS_XATTR to mask those methods. And ext4_iget also always sets it, so there is an inconsistency. Signed-off-by:
Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by:
-
Lukas Czerner authored
Remove unused function ext4_ext_check_cache() and merge the code back to the ext4_ext_in_cache(). Reviewed-by:
-
Wei Yongjun authored
Using kmem_cache_zalloc() instead of kmem_cache_alloc() and memset(). spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by:
-
- 26 Sep, 2012 6 commits
-
-
Dmitry Monakhov authored
Uninitialized extent may became initialized(parallel writeback task) at any moment after we drop i_data_sem, so we have to recheck extent's state after we hold page's lock and i_data_sem. If we about to change page's mapping we must hold page's lock in order to serialize other users. Signed-off-by:
-
Dmitry Monakhov authored
Non-full list of bugs: 1) uninitialized extent optimization does not hold page's lock, and simply replace brunches after that writeback code goes crazy because block mapping changed under it's feets kernel BUG at fs/ext4/inode.c:1434! ( 288'th xfstress) 2) uninitialized extent may became initialized right after we drop i_data_sem, so extent state must be rechecked 3) Locked pages goes uptodate via following sequence: ->readpage(page); lock_page(page); use_that_page(page) But after readpage() one may invalidate it because it is uptodate and unlocked (reclaimer does that) As result kernel bug at include/linux/buffer_head.c:133! 4) We call write_begin() with already opened stansaction which result in following deadlock: ->move_extent_per_page() ->ext4_journal_start()-> hold journal transaction ->write_begin() ->ext4_da_write_begin() ->ext4_nonda_switch() ->writeback_inodes_sb_if_idle() --> will wait for journal_stop() 5) try_to_release_page() may fail and it does fail if one of page's bh was pinned by journal 6) If we about to change page's mapping we MUST hold it's lock during entire remapping procedure, this is true for both pages(original and donor one) Fixes: - Avoid (1) and (2) simply by temproraly drop uninitialized extent handling optimization, this will be reimplemented later. - Fix (3) by manually forcing page to uptodate state w/o dropping it's lock - Fix (4) by rearranging existing locking: from: journal_start(); ->write_begin to: write_begin(); journal_extend() - Fix (5) simply by checking retvalue - Fix (6) by locking both (original and donor one) pages during extent swap with help of mext_page_double_lock() Signed-off-by: -
Dmitry Monakhov authored
Proper block swap for inodes with full journaling enabled is truly non obvious task. In order to be on a safe side let's explicitly disable it for now. Signed-off-by:
-
Dmitry Monakhov authored
- Remove usless checks, because it is too late to check that inode != NULL at the moment it was referenced several times. - Double lock routines looks very ugly and locking ordering relays on order of i_ino, but other kernel code rely on order of pointers. Let's make them simple and clean. - check that inodes belongs to the same SB as soon as possible. Signed-off-by:
-
Tao Ma authored
When performing an online resize, we add a bunch of groups at one time in ext4_flex_group_add, so in most cases a lot of group descriptors will be in the same group block. But in the end of this function, update_backups will be called for every group descriptor and the same block will be copied and journalled again and again. It is really a waste. Fix things so we only update a particular bg descriptor block once and skip subsequent updates of the same block. Signed-off-by:
Tao Ma <boyu.mt@taobao.com> Signed-off-by:
-
Dmitry Monakhov authored
bh_submit_read() is responsible for unlock bh on endio. In addition, we need to use bh_uptodate_or_lock() to avoid races. Signed-off-by:
-
- 24 Sep, 2012 3 commits
-
-
Yongqiang Yang authored
Recently, I ecountered some corrupted filesystems in which some groups' free inode counts were 65535, it seemed that free inode count was overflow. This patch teaches ext4 to check free inode count before allocaing an inode. Signed-off-by:
Yongqiang Yang <xiaoqiangnk@gmail.com> Signed-off-by:
-
Yongqiang Yang authored
Free block counters should be checked before doing allocation. Signed-off-by:
-
Herton Ronaldo Krzesinski authored
The crash was caused by a variable being erronously declared static in token2str(). In addition to /proc/mounts, the problem can also be easily replicated by accessing /proc/fs/ext4/<partition>/options in parallel: $ cat /proc/fs/ext4/<partition>/options > options.txt ... and then running the following command in two different terminals: $ while diff /proc/fs/ext4/<partition>/options options.txt; do true; done This is also the cause of the following a crash while running xfstests #234, as reported in the following bug reports: https://bugs.launchpad.net/bugs/1053019 https://bugzilla.kernel.org/show_bug.cgi?id=47731Signed-off-by:
Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
-
- 20 Sep, 2012 2 commits
-
-
Tao Ma authored
The update_backups() function is used to backup all the metadata blocks, so we should not take it for granted that 'data' is pointed to a super block and use ext4_superblock_csum_set to calculate the checksum there. In case where the data is a group descriptor block, it will corrupt the last group descriptor, and then e2fsck will complain about it it. As all the metadata checksums should already be OK when we do the backup, remove the wrong ext4_superblock_csum_set and it should be just fine. Reported-by:
-
Theodore Ts'o authored
In ext4_nonda_switch(), if the file system is getting full we used to call writeback_inodes_sb_if_idle(). The problem is that we can be holding i_mutex already, and this causes a potential deadlock when writeback_inodes_sb_if_idle() when it tries to take s_umount. (See lockdep output below). As it turns out we don't need need to hold s_umount; the fact that we are in the middle of the write(2) system call will keep the superblock pinned. Unfortunately writeback_inodes_sb() checks to make sure s_umount is taken, and the VFS uses a different mechanism for making sure the file system doesn't get unmounted out from under us. The simplest way of dealing with this is to just simply grab s_umount using a trylock, and skip kicking the writeback flusher thread in the very unlikely case that we can't take a read lock on s_umount without blocking. Also, we now check the cirteria for kicking the writeback thread before we decide to whether to fall back to non-delayed writeback, so if there are any outstanding delayed allocation writes, we try to get them resolved as soon as possible. [ INFO: possible circular locking dependency detected ] 3.6.0-rc1-00042-gce894ca #367 Not tainted ------------------------------------------------------- dd/8298 is trying to acquire lock: (&type->s_umount_key#18){++++..}, at: [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 but task is already holding lock: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 which lock already depends on the new lock. 2 locks held by dd/8298: #0: (sb_writers#2){.+.+.+}, at: [<c01ddcc5>] generic_file_aio_write+0x56/0xd3 #1: (&sb->s_type->i_mutex_key#8){+.+...}, at: [<c01ddcce>] generic_file_aio_write+0x5f/0xd3 stack backtrace: Pid: 8298, comm: dd Not tainted 3.6.0-rc1-00042-gce894ca #367 Call Trace: [<c015b79c>] ? console_unlock+0x345/0x372 [<c06d62a1>] print_circular_bug+0x190/0x19d [<c019906c>] __lock_acquire+0x86d/0xb6c [<c01999db>] ? mark_held_locks+0x5c/0x7b [<c0199724>] lock_acquire+0x66/0xb9 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c06db935>] down_read+0x28/0x58 [<c02277d4>] ? writeback_inodes_sb_if_idle+0x28/0x46 [<c02277d4>] writeback_inodes_sb_if_idle+0x28/0x46 [<c026f3b2>] ext4_nonda_switch+0xe1/0xf4 [<c0271ece>] ext4_da_write_begin+0x27/0x193 [<c01dcdb0>] generic_file_buffered_write+0xc8/0x1bb [<c01ddc47>] __generic_file_aio_write+0x1dd/0x205 [<c01ddce7>] generic_file_aio_write+0x78/0xd3 [<c026d336>] ext4_file_write+0x480/0x4a6 [<c0198c1d>] ? __lock_acquire+0x41e/0xb6c [<c0180944>] ? sched_clock_cpu+0x11a/0x13e [<c01967e9>] ? trace_hardirqs_off+0xb/0xd [<c018099f>] ? local_clock+0x37/0x4e [<c0209f2c>] do_sync_write+0x67/0x9d [<c0209ec5>] ? wait_on_retry_sync_kiocb+0x44/0x44 [<c020a7b9>] vfs_write+0x7b/0xe6 [<c020a9a6>] sys_write+0x3b/0x64 [<c06dd4bd>] syscall_call+0x7/0xb Signed-off-by:
-
- 19 Sep, 2012 2 commits
-
-
Andrey Sidorov authored
Do not iterate over data blocks scanning for bh's to forget as they're never exist. This improves time taken by unlink / truncate syscall. Tested by continuously truncating file that is being written by dd. Another test is rm -rf of linux tree while tar unpacks it. With ordered data mode condition unlikely(!tbh) was always met in ext4_free_blocks. With journal data mode tbh was found only few times, so optimisation is also possible. Unlinking fallocated 60G file after doing sync && echo 3 > /proc/sys/vm/drop_caches && time rm --help X86 before (linux 3.6-rc4): # time rm -f test1 real 0m2.710s user 0m0.000s sys 0m1.530s X86 after: # time rm -f test1 real 0m0.644s user 0m0.003s sys 0m0.060s MIPS before (linux 2.6.37): # time rm -f test1 real 0m 4.93s user 0m 0.00s sys 0m 4.61s MIPS after: # time rm -f test1 real 0m 0.16s user 0m 0.00s sys 0m 0.06s Signed-off-by:
Andrey Sidorov <qrxd43@motorola.com>
-
Theodore Ts'o authored
Commit 1c6bd717 introduced a regression where an online resize operation which did not change the number of block groups would fail, i.e: mke2fs -t /dev/vdc 60000 mount /dev/vdc resize2fs /dev/vdc 60001 This was due to a bug in the logic regarding when to try converting the filesystem to use meta_bg. Also fix up a number of other minor issues with the online resizing code: (a) Fix a sparse warning; (b) only check to make sure the device is large enough once, instead of multiple times through the resize loop. Signed-off-by:
-
- 18 Sep, 2012 4 commits
-
-
Anatol Pomozov authored
Instead of checking whether the handle is valid, we check if journal is enabled. This avoids taking the s_orphan_lock mutex in all cases when there is no journal in use, including the error paths where ext4_orphan_del() is called with a handle set to NULL. Signed-off-by:
Anatol Pomozov <anatol.pomozov@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
This is a revert of commit b56ff9d3, which removed the call to ext4_issue_discard() to fix a BUG reported because ext4_issue_discard() was being called from inside a block group spinlock. As it turns out this bug had already been fixed by Lukas Czerner in commit 53fdcf99 by the simple expedient of moving when we call ext4_issue_discard() outside the spinlock. So it should be safe to re-enable this functionality, which I tested by putting an BUG_ON(in_atomic) just after the restored callsite to ext4_issue_discard(). Addresses-Google-Bug: #6750518 Signed-off-by:
-
Carlos Maiolino authored
htree_dirblock_to_tree() declares a non-initialized 'err' variable, which is passed as a reference to another functions expecting them to set this variable with their error codes. It's passed to ext4_bread(), which then passes it to ext4_getblk(). If ext4_map_blocks() returns 0 due to a lookup failure, leaving the ext4_getblk() buffer_head uninitialized, it will make ext4_getblk() return to ext4_bread() without initialize the 'err' variable, and ext4_bread() will return to htree_dirblock_to_tree() with this variable still uninitialized. htree_dirblock_to_tree() will pass this variable with garbage back to ext4_htree_fill_tree(), which expects a number of directory entries added to the rb-tree. which, in case, might return a fake non-zero value due the garbage left in the 'err' variable, leading the kernel to an Oops in ext4_dx_readdir(), once this is expecting a filled rb-tree node, when in turn it will have a NULL-ed one, causing an invalid page request when trying to get a fname struct from this NULL-ed rb-tree node in this line: fname = rb_entry(info->curr_node, struct fname, rb_hash); The patch itself initializes the err variable in htree_dirblock_to_tree() to avoid usage mistakes by the called functions, and also fix ext4_getblk() to return a initialized 'err' variable when ext4_map_blocks() fails a lookup. Signed-off-by:
-
Theodore Ts'o authored
Signed-off-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
-
- 13 Sep, 2012 3 commits
-
-
Theodore Ts'o authored
Signed-off-by: -
Theodore Ts'o authored
For very long online resizes, a periodic update to the console log is helpful for debugging and for progress reporting. Signed-off-by: -
Theodore Ts'o authored
If we have run out of reserved gdt blocks, then clear the resize_inode feature and enable the meta_bg feature, so that we can continue resizing the file system seamlessly. Signed-off-by:
-
- 12 Sep, 2012 1 commit
-
-
Theodore Ts'o authored
Set bg_itable_unused for file systems that have uninit_bg enabled. This will speed up the first e2fsck run after the file system is resized. Signed-off-by:
-
- 05 Sep, 2012 4 commits
-
-
Yongqiang Yang authored
This patch adds support for resizing file systems with the meta_bg and 64bit features. [ Added a fix by tytso to fix a divide by zero when resizing a filesystem from 14 TB to 18TB. Also fixed overhead accounting for meta_bg file systems.] Signed-off-by:
-
Theodore Ts'o authored
Previously we allocated the s_group_info array with enough space for any future possible growth of the file system via online resize. This is unfortunate because it wastes memory, and it doesn't work for the meta_bg scheme, since there is no limit based on the number of reserved gdt blocks. So add the code to grow the s_group_info array as needed. Signed-off-by: -
Theodore Ts'o authored
Previously, we allocated the s_flex_groups array to the maximum size that the file system could be resized. There was two problems with this approach. First, it wasted memory in the common case where the file system was not resized. Secondly, once we start allowing online resizing using the meta_bg scheme, there is no maximum size that the file system can be resized. So instead, we need to grow the s_flex_groups at inline resize time. Signed-off-by: -
Yongqiang Yang authored
The resize code was needlessly writing the backup block group descriptor blocks multiple times (once per block group) during an online resize. Signed-off-by:
-
