- 14 Mar, 2013 5 commits
-
-
Alan Stern authored
commit 221f8dfc upstream. This patch (as1649) reverts commit 55bcdce8 (USB: EHCI: remove ASS/PSS polling timeout). That commit was written under the assumption that some controllers may take a very long time to turn off their async and periodic schedules. It now appears that in fact the schedules do get turned off reasonably quickly, but some controllers occasionally leave the schedules' status bits turned on and consequently ehci-hcd can't tell that the schedules are off. VIA controllers in particular have this problem. ehci-hcd tells the hardware to turn off the async schedule, the schedule does get turned off, but the status bit remains on. Since the EHCI spec requires that the schedules not be re-enabled until the previous disable has taken effect, with an unlimited timeout the async schedule never gets turned back on. The resulting symptom is that the system is unable to communicate with USB devices. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by:
Ronald <ronald645@gmail.com> Reported-and-tested-by:
Paul Hartman <paul.hartman@gmail.com> Reported-and-tested-by:
Dieter Nützel <dieter@nuetzel-hh.de> Reported-and-tested-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Catalin Marinas authored
commit 69dde4c5 upstream. Following commit 26ffd0d4 (ARM: mm: introduce present, faulting entries for PAGE_NONE), if a page has been mapped as PROT_NONE, the L_PTE_VALID bit is cleared by the set_pte_ext() code. With LPAE the software and hardware pte share the same location and subsequent modifications of pte range (change_protection()) will leave the L_PTE_VALID bit cleared. This patch adds the L_PTE_VALID bit to the newprot mask in pte_modify(). Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Reported-by:
Subash Patel <subash.rp@samsung.com> Tested-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Nicolas Pitre authored
commit 70264367 upstream. When udelay() is implemented using an architected timer, it is wrong to scale loops_per_jiffy when changing the CPU clock frequency since the timer clock remains constant. The lpj should probably become an implementation detail relevant to the CPU loop based delay routine only and more confined to it. In the mean time this is the minimal fix needed to have expected delays with the timer based implementation when cpufreq is also in use. Reported-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Nicolas Pitre <nico@linaro.org> Tested-by:
Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by:
-
Russell King authored
commit b255188f upstream. Paolo Pisati reports that IPv6 triggers this warning: BUG: scheduling while atomic: swapper/0/0/0x40000100 Modules linked in: [<c001b1c4>] (unwind_backtrace+0x0/0xf0) from [<c0503c5c>] (__schedule_bug+0x48/0x5c) [<c0503c5c>] (__schedule_bug+0x48/0x5c) from [<c0508608>] (__schedule+0x700/0x740) [<c0508608>] (__schedule+0x700/0x740) from [<c007007c>] (__cond_resched+0x24/0x34) [<c007007c>] (__cond_resched+0x24/0x34) from [<c05086dc>] (_cond_resched+0x3c/0x44) [<c05086dc>] (_cond_resched+0x3c/0x44) from [<c0021f6c>] (do_alignment+0x178/0x78c) [<c0021f6c>] (do_alignment+0x178/0x78c) from [<c00083e0>] (do_DataAbort+0x34/0x98) [<c00083e0>] (do_DataAbort+0x34/0x98) from [<c0509a60>] (__dabt_svc+0x40/0x60) Exception stack(0xc0763d70 to 0xc0763db8) 3d60: e97e805e e97e806e 2c000000 11000000 3d80: ea86bb00 0000002c 00000011 e97e807e c076d2a8 e97e805e e97e806e 0000002c 3da0: 3d000000 c0763dbc c04b98fc c02a8490 00000113 ffffffff [<c0509a60>] (__dabt_svc+0x40/0x60) from [<c02a8490>] (__csum_ipv6_magic+0x8/0xc8) Fix this by using probe_kernel_address() stead of __get_user(). Reported-by:
Paolo Pisati <p.pisati@gmail.com> Tested-by:
-
Russell King authored
commit 5e4ba617 upstream. Martin Storsjö reports that the sequence: ee312ac1 vsub.f32 s4, s3, s2 ee702ac0 vsub.f32 s5, s1, s0 e59f0028 ldr r0, [pc, #40] ee111a90 vmov r1, s3 on Raspberry Pi (implementor 41 architecture 1 part 20 variant b rev 5) where s3 is a denormal and s2 is zero results in incorrect behaviour - the instruction "vsub.f32 s5, s1, s0" is not executed: VFP: bounce: trigger ee111a90 fpexc d0000780 VFP: emulate: INST=0xee312ac1 SCR=0x00000000 ... As we can see, the instruction triggering the exception is the "vmov" instruction, and we emulate the "vsub.f32 s4, s3, s2" but fail to properly take account of the FPEXC_FP2V flag in FPEXC. This is because the test for the second instruction register being valid is bogus, and will always skip emulation of the second instruction. Reported-by:
Martin Storsjö <martin@martin.st> Tested-by:
-
- 03 Mar, 2013 35 commits
-
-
Greg Kroah-Hartman authored
-
Dave Chinner authored
commit 1e82379b upstream. When we are converting local data to an extent format as a result of adding an attribute, the type of data contained in the local fork determines the behaviour that needs to occur. xfs_bmap_add_attrfork_local() already handles the directory data case specially by using S_ISDIR() and calling out to xfs_dir2_sf_to_block(), but with verifiers we now need to handle each different type of metadata specially and different metadata formats require different verifiers (and eventually block header initialisation). There is only a single place that we add and attribute fork to the inode, but that is in the attribute code and it knows nothing about the specific contents of the data fork. It is only the case of local data that is the issue here, so adding code to hadnle this case in the attribute specific code is wrong. Hence we are really stuck trying to detect the data fork contents in xfs_bmap_add_attrfork_local() and performing the correct callout there. Luckily the current cases can be determined by S_IS* macros, and we can push the work off to data specific callouts, but each of those callouts does a lot of work in common with xfs_bmap_local_to_extents(). The only reason that this fails for symlinks right now is is that xfs_bmap_local_to_extents() assumes the data fork contains extent data, and so attaches a a bmap extent data verifier to the buffer and simply copies the data fork information straight into it. To fix this, allow us to pass a "formatting" callback into xfs_bmap_local_to_extents() which is responsible for setting the buffer type, initialising it and copying the data fork contents over to the new buffer. This allows callers to specify how they want to format the new buffer (which is necessary for the upcoming CRC enabled metadata blocks) and hence make xfs_bmap_local_to_extents() useful for any type of data fork content. Signed-off-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Mark Tinguely <tinguely@sgi.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
-
Matt Fleming authored
commit da27a243 upstream. It makes no sense to treat the following filenames as unique, VarName-abcdefab-abcd-abcd-abcd-abcdefabcdef VarName-ABCDEFAB-ABCD-ABCD-ABCD-ABCDEFABCDEF VarName-ABcDEfAB-ABcD-ABcD-ABcD-ABcDEfABcDEf VarName-aBcDEfAB-aBcD-aBcD-aBcD-aBcDEfaBcDEf ... etc ... since the guid will be converted into a binary representation, which has no case. Roll our own dentry operations so that we can treat the variable name part of filenames ("VarName" in the above example) as case-sensitive, but the guid portion as case-insensitive. That way, efivarfs will refuse to create the above files if any one already exists. Reported-by:
Lingzhu Xiang <lxiang@redhat.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Jeremy Kerr <jeremy.kerr@canonical.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Matt Fleming authored
commit 47f531e8 upstream. The only thing that efivarfs does to enforce a valid filename is ensure that the name isn't too short. We need to strongly sanitise any filenames, not least because variable creation is delayed until efivarfs_file_write(), which means we can't rely on the firmware to inform us of an invalid name, because if the file is never written to we'll never know it's invalid. Perform a couple of steps before agreeing to create a new file, * hex_to_bin() returns a value indicating whether or not it was able to convert its arguments to a binary representation - we should check it. * Ensure that the GUID portion of the filename is the correct length and format. * The variable name portion of the filename needs to be at least one character in size. Reported-by:
-
Thomas Renninger authored
commit 565d956a upstream. Reflect this dependency in Kconfig, to prevent build failures. Shorten the config description as suggested by Borislav Petkov. Finding a suitable memory area to store the modified table(s) has been taken over from arch/x86/kernel/setup.c and makes use of max_low_pfn_mapped: memblock_find_in_range(0, max_low_pfn_mapped,...) This one is X86 specific. It may not be hard to extend this functionality for other ACPI aware architectures if there is need for. For now make this feature only available for X86 to avoid build failures on IA64, compare with: https://bugzilla.kernel.org/show_bug.cgi?id=54091Signed-off-by:
Thomas Renninger <trenn@suse.de> Link: http://lkml.kernel.org/r/1361538742-67599-3-git-send-email-trenn@suse.deSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Lee, Chun-Yi authored
commit deb94101 upstream. When initrd file didn't put at the same place with stub kernel, we need give the file path of initrd, but need use backslash to separate directory and file. It's not friendly to unix/linux user, and not so intuitive for bootloader forward paramters to efi stub kernel by chainloading. This patch add support to handle_ramdisks for allow slash in file path of initrd, it convert slash to backlash when parsing path. In additional, this patch also separates print code of efi_char16_t from efi_printk, and print out the path/filename of initrd when failed to open initrd file. It's good for debug and discover typo. Signed-off-by:
Lee, Chun-Yi <jlee@suse.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
Alexey Klimov authored
commit 0322bd39 upstream. Don't let Masterkit MA901 USB radio be handled by usb hid drivers. This device will be handled by radio-ma901.c driver. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by:
-
James Ralston authored
commit 151743fd upstream. This patch adds the AHCI-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com> Signed-off-by:
-
Seth Heasley authored
commit 29e674dd upstream. This patch adds the AHCI and RAID-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
-
James Ralston authored
commit 3aee8bc5 upstream. This patch adds the IDE-mode SATA Device IDs for the Intel Wellsburg PCH Signed-off-by:
-
Seth Heasley authored
commit aaa51527 upstream. This patch adds the IDE-mode SATA DeviceIDs for the Intel Avoton SOC. Signed-off-by:
-
Ian Abbott authored
commit cc400e18 upstream. Some low-level comedi drivers (incorrectly) point `dev->read_subdev` or `dev->write_subdev` to a subdevice that does not support asynchronous commands. Comedi's poll(), read() and write() file operation handlers assume these subdevices do support asynchronous commands. In particular, they assume `s->async` is valid (where `s` points to the read or write subdevice), which it won't be if it has been set incorrectly. This can lead to a NULL pointer dereference. Check `s->async` is non-NULL in `comedi_poll()`, `comedi_read()` and `comedi_write()` to avoid the bug. Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Joseph Salisbury authored
commit 66f2fda9 upstream. This patch adds a quirk to allow the Sony VGN-FW41E_H to suspend/resume properly. References: http://bugs.launchpad.net/bugs/1113547Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Rajanikanth H.V authored
commit eeb0751c upstream. Power supply subsystem creates thermal zone device for the property 'POWER_SUPPLY_PROP_TEMP' which requires thermal subsystem to be ready before 'ab8500 battery temperature monitor' driver is initialized. ab8500 btemp driver is initialized with subsys_initcall whereas thermal subsystem is initialized with fs_initcall which causes thermal_zone_device_register(...) to crash since the required structure 'thermal_class' is not initialized yet: Unable to handle kernel NULL pointer dereference at virtual address 000000a4 pgd = c0004000 [000000a4] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.8.0-rc4-00001-g632fda8-dirty #1) PC is at _raw_spin_lock+0x18/0x54 LR is at get_device_parent+0x50/0x1b8 pc : [<c02f1dd0>] lr : [<c01cb248>] psr: 60000013 sp : ef04bdc8 ip : 00000000 fp : c0446180 r10: ef216e38 r9 : c03af5d0 r8 : ef275c18 r7 : 00000000 r6 : c0476c14 r5 : ef275c18 r4 : ef095840 r3 : ef04a000 r2 : 00000001 r1 : 00000000 r0 : 000000a4 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 0000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xef04a238) Stack: (0xef04bdc8 to 0xef04c000) [...] [<c02f1dd0>] (_raw_spin_lock+0x18/0x54) from [<c01cb248>] (get_device_parent+0x50/0x1b8) [<c01cb248>] (get_device_parent+0x50/0x1b8) from [<c01cb8d8>] (device_add+0xa4/0x574) [<c01cb8d8>] (device_add+0xa4/0x574) from [<c020b91c>] (thermal_zone_device_register+0x118/0x938) [<c020b91c>] (thermal_zone_device_register+0x118/0x938) from [<c0202030>] (power_supply_register+0x170/0x1f8) [<c0202030>] (power_supply_register+0x170/0x1f8) from [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) [<c02055ec>] (ab8500_btemp_probe+0x208/0x47c) from [<c01cf0dc>] (platform_drv_probe+0x14/0x18) [<c01cf0dc>] (platform_drv_probe+0x14/0x18) from [<c01cde70>] (driver_probe_device+0x74/0x20c) [<c01cde70>] (driver_probe_device+0x74/0x20c) from [<c01ce094>] (__driver_attach+0x8c/0x90) [<c01ce094>] (__driver_attach+0x8c/0x90) from [<c01cc640>] (bus_for_each_dev+0x4c/0x80) [<c01cc640>] (bus_for_each_dev+0x4c/0x80) from [<c01cd6b4>] (bus_add_driver+0x16c/0x23c) [<c01cd6b4>] (bus_add_driver+0x16c/0x23c) from [<c01ce54c>] (driver_register+0x78/0x14c) [<c01ce54c>] (driver_register+0x78/0x14c) from [<c00086ac>] (do_one_initcall+0xfc/0x164) [<c00086ac>] (do_one_initcall+0xfc/0x164) from [<c02e89c8>] (kernel_init+0x120/0x2b8) [<c02e89c8>] (kernel_init+0x120/0x2b8) from [<c000e358>] (ret_from_fork+0x14/0x3c) Code: e3c3303f e5932004 e2822001 e5832004 (e1903f9f) ---[ end trace ed9df72941b5bada ]--- Signed-off-by:
Rajanikanth H.V <rajanikanth.hv@stericsson.com> Signed-off-by:
Anton Vorontsov <anton@enomsg.org> Signed-off-by:
-
Lee Jones authored
commit e3455002 upstream. Only root should have write permission on sysfs file ab8500_chargalg/chargalg. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
NeilBrown authored
commit bde83b9a upstream. commit a66f59ba bq27x00_battery: Add support for BQ27425 chip introduced 2 bugs. 1/ 'chip' was set to BQ27425 unconditionally - breaking support for other devices; 2/ BQ27425 does not support cycle count, how the code still tries to get the cycle count for BQ27425, and now does it twice for other chips. Signed-off-by:
NeilBrown <neilb@suse.de> Cc: Saranya Gopal <saranya.gopal@intel.com> Signed-off-by:
-
Li Zefan authored
commit 71b5707e upstream. In cgroup_exit() put_css_set_taskexit() is called without any lock, which might lead to accessing a freed cgroup: thread1 thread2 --------------------------------------------- exit() cgroup_exit() put_css_set_taskexit() atomic_dec(cgrp->count); rmdir(); /* not safe !! */ check_for_release(cgrp); rcu_read_lock() can be used to make sure the cgroup is alive. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Li Zefan authored
commit 63f43f55 upstream. rename() will change dentry->d_name. The result of this race can be worse than seeing partially rewritten name, but we might access a stale pointer because rename() will re-allocate memory to hold a longer name. It's safe in the protection of dentry->d_lock. v2: check NULL dentry before acquiring dentry lock. Signed-off-by:
-
Seiji Aguchi authored
commit 9f244e9c upstream. [Issue] When pstore is in panic and emergency-restart paths, it may be blocked in those paths because it simply takes spin_lock. This is an example scenario which pstore may hang up in a panic path: - cpuA grabs psinfo->buf_lock - cpuB panics and calls smp_send_stop - smp_send_stop sends IRQ to cpuA - after 1 second, cpuB gives up on cpuA and sends an NMI instead - cpuA is now in an NMI handler while still holding buf_lock - cpuB is deadlocked This case may happen if a firmware has a bug and cpuA is stuck talking with it more than one second. Also, this is a similar scenario in an emergency-restart path: - cpuA grabs psinfo->buf_lock and stucks in a firmware - cpuB kicks emergency-restart via either sysrq-b or hangcheck timer. And then, cpuB is deadlocked by taking psinfo->buf_lock again. [Solution] This patch avoids the deadlocking issues in both panic and emergency_restart paths by introducing a function, is_non_blocking_path(), to check if a cpu can be blocked in current path. With this patch, pstore is not blocked even if another cpu has taken a spin_lock, in those paths by changing from spin_lock_irqsave to spin_trylock_irqsave. In addition, according to a comment of emergency_restart() in kernel/sys.c, spin_lock shouldn't be taken in an emergency_restart path to avoid deadlock. This patch fits the comment below. <snip> /** * emergency_restart - reboot the system * * Without shutting down any hardware or taking any locks * reboot the system. This is called when we know we are in * trouble so this is our best effort to reboot. This is * safe to call in interrupt context. */ void emergency_restart(void) <snip> Signed-off-by:
Seiji Aguchi <seiji.aguchi@hds.com> Acked-by:
Don Zickus <dzickus@redhat.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Cc: CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit a2c1c57b upstream. To avoid executing the same work item concurrenlty, workqueue hashes currently busy workers according to their current work items and looks up the the table when it wants to execute a new work item. If there already is a worker which is executing the new work item, the new item is queued to the found worker so that it gets executed only after the current execution finishes. Unfortunately, a work item may be freed while being executed and thus recycled for different purposes. If it gets recycled for a different work item and queued while the previous execution is still in progress, workqueue may make the new work item wait for the old one although the two aren't really related in any way. In extreme cases, this false dependency may lead to deadlock although it's extremely unlikely given that there aren't too many self-freeing work item users and they usually don't wait for other work items. To alleviate the problem, record the current work function in each busy worker and match it together with the work item address in find_worker_executing_work(). While this isn't complete, it ensures that unrelated work items don't interact with each other and in the very unlikely case where a twisted wq user triggers it, it's always onto itself making the culprit easy to spot. Signed-off-by:
Andrey Isakov <andy51@gmx.ru> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=51701 Cc: stable@vger.kernel.org
-
Miklos Szeredi authored
commit dfca7ceb upstream. drop_nlink() warns if nlink is already zero. This is triggerable by a buggy userspace filesystem. The cure, I think, is worse than the disease so disable the warning. Reported-by:
Tero Roponen <tero.roponen@gmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Fernando Luis Vázquez Cao authored
commit 99d24902 upstream. Document what the fix-up is does and make it more robust by ensuring that it is only applied to the USB interface that corresponds to the mouse (sony_report_fixup() is called once per interface during probing). Signed-off-by:
Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp> Signed-off-by:
-
Fernando Luis Vázquez Cao authored
commit a4649184 upstream. Some Vaio desktop computers, among them the VGC-LN51JGB multimedia PC, have a RF receiver, multi-interface USB device 054c:0374, that is used to connect a wireless keyboard and a wireless mouse. The keyboard works flawlessly, but the mouse (VGP-WMS3 in my case) does not seem to be generating any pointer events. The problem is that the mouse pointer is wrongly declared as a constant non-data variable in the report descriptor (see lsusb and usbhid-dump output below), with the consequence that it is ignored by the HID code. Add this device to the have-special-driver list and fix up the report descriptor in the Sony-specific driver which happens to already have a fixup for a similar firmware bug. # lsusb -vd 054C:0374 Bus 003 Device 002: ID 054c:0374 Sony Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x054c Sony Corp. idProduct 0x0374 iSerial 0 [...] Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 2 RF Receiver [...] Report Descriptor: (length is 100) [...] Item(Global): Usage Page, data= [ 0x01 ] 1 Generic Desktop Controls Item(Local ): Usage, data= [ 0x30 ] 48 Direction-X Item(Local ): Usage, data= [ 0x31 ] 49 Direction-Y Item(Global): Report Count, data= [ 0x02 ] 2 Item(Global): Report Size, data= [ 0x08 ] 8 Item(Global): Logical Minimum, data= [ 0x81 ] 129 Item(Global): Logical Maximum, data= [ 0x7f ] 127 Item(Main ): Input, data= [ 0x07 ] 7 Constant Variable Relative No_Wrap Linear Preferred_State No_Null_Position Non_Volatile Bitfield # usbhid-dump 003:002:001:DESCRIPTOR 1357910009.758544 05 01 09 02 A1 01 05 01 09 02 A1 02 85 01 09 01 A1 00 05 09 19 01 29 05 95 05 75 01 15 00 25 01 81 02 75 03 95 01 81 01 05 01 09 30 09 31 95 02 75 08 15 81 25 7F 81 07 A1 02 85 01 09 38 35 00 45 00 15 81 25 7F 95 01 75 08 81 06 C0 A1 02 85 01 05 0C 15 81 25 7F 95 01 75 08 0A 38 02 81 06 C0 C0 C0 C0 Signed-off-by:
-
J. Bruce Fields authored
commit cc630d9f upstream. Rewrite server shutdown to remove the assumption that there are no longer any threads running (no longer true, for example, when shutting down the service in one network namespace while it's still running in others). Do that by doing what we'd do in normal circumstances: just CLOSE each socket, then enqueue it. Since there may not be threads to handle the resulting queued xprts, also run a simplified version of the svc_recv() loop run by a server to clean up any closed xprts afterwards. Tested-by:
Jason Tibbitts <tibbs@math.uh.edu> Tested-by:
Paweł Sikora <pawel.sikora@agmk.net> Acked-by:
Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
J. Bruce Fields authored
commit e75bafbf upstream. svc_age_temp_xprts expires xprts in a two-step process: first it takes the sv_lock and moves the xprts to expire off their server-wide list (sv_tempsocks or sv_permsocks) to a local list. Then it drops the sv_lock and enqueues and puts each one. I see no reason for this: svc_xprt_enqueue() will take sp_lock, but the sv_lock and sp_lock are not otherwise nested anywhere (and documentation at the top of this file claims it's correct to nest these with sp_lock inside.) Tested-by:
-
majianpeng authored
commit 2d32b29a upstream. When free nfs-client, it must free the ->cl_stateids. Signed-off-by:
Jianpeng Ma <majianpeng@gmail.com> Signed-off-by:
-
Lukas Czerner authored
commit 304e220f upstream. ext4_has_free_clusters() should tell us whether there is enough free clusters to allocate, however number of free clusters in the file system is converted to blocks using EXT4_C2B() which is not only wrong use of the macro (we should have used EXT4_NUM_B2C) but it's also completely wrong concept since everything else is in cluster units. Moreover when calculating number of root clusters we should be using macro EXT4_NUM_B2C() instead of EXT4_B2C() otherwise the result might be off by one. However r_blocks_count should always be a multiple of the cluster ratio so doing a plain bit shift should be enough here. We avoid using EXT4_B2C() because it's confusing. As a result of the first problem number of free clusters is much bigger than it should have been and ext4_has_free_clusters() would return 1 even if there is really not enough free clusters available. Fix this by removing the EXT4_C2B() conversion of free clusters and using bit shift when calculating number of root clusters. This bug affects number of xfstests tests covering file system ENOSPC situation handling. With this patch most of the ENOSPC problems with bigalloc file system disappear, especially the errors caused by delayed allocation not having enough space when the actual allocation is finally requested. Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
"Theodore Ts'o" <tytso@mit.edu> Signed-off-by:
-
Lukas Czerner authored
commit 1231b3a1 upstream. Currently when new xattr block is created or released we we would call dquot_free_block() or dquot_alloc_block() respectively, among the else decrementing or incrementing the number of blocks assigned to the inode by one block. This however does not work for bigalloc file system because we always allocate/free the whole cluster so we have to count with that in dquot_free_block() and dquot_alloc_block() as well. Use the clusters-to-blocks conversion EXT4_C2B() when passing number of blocks to the dquot_alloc/free functions to fix the problem. The problem has been revealed by xfstests #117 (and possibly others). Signed-off-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
-
Niu Yawei authored
commit f1167009 upstream. In ext4_mb_add_n_trim(), lg_prealloc_lock should be taken when changing the lg_prealloc_list. Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Signed-off-by:
-
Theodore Ts'o authored
commit 72ba7450 upstream. In addition, print the error returned from ext4_enable_quotas() Signed-off-by:
Carlos Maiolino <cmaiolino@redhat.com> Signed-off-by:
-
Eryu Guan authored
commit 15b49132 upstream. Validate the bh pointer before using it, since ext4_read_block_bitmap_nowait() might return NULL. I've seen this in fsfuzz testing. EXT4-fs error (device loop0): ext4_read_block_bitmap_nowait:385: comm touch: Cannot get buffer for block bitmap - block_group = 0, block_bitmap = 3925999616 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8121de25>] ext4_wait_block_bitmap+0x25/0xe0 ... Call Trace: [<ffffffff8121e1e5>] ext4_read_block_bitmap+0x35/0x60 [<ffffffff8125e9c6>] ext4_free_blocks+0x236/0xb80 [<ffffffff811d0d36>] ? __getblk+0x36/0x70 [<ffffffff811d0a5f>] ? __find_get_block+0x8f/0x210 [<ffffffff81191ef3>] ? kmem_cache_free+0x33/0x140 [<ffffffff812678e5>] ext4_xattr_release_block+0x1b5/0x1d0 [<ffffffff812679be>] ext4_xattr_delete_inode+0xbe/0x100 [<ffffffff81222a7c>] ext4_free_inode+0x7c/0x4d0 [<ffffffff812277b8>] ? ext4_mark_inode_dirty+0x88/0x230 [<ffffffff8122993c>] ext4_evict_inode+0x32c/0x490 [<ffffffff811b8cd7>] evict+0xa7/0x1c0 [<ffffffff811b8ed3>] iput_final+0xe3/0x170 [<ffffffff811b8f9e>] iput+0x3e/0x50 [<ffffffff812316fd>] ext4_add_nondir+0x4d/0x90 [<ffffffff81231d0b>] ext4_create+0xeb/0x170 [<ffffffff811aae9c>] vfs_create+0xac/0xd0 [<ffffffff811ac845>] lookup_open+0x185/0x1c0 [<ffffffff8129e3b9>] ? selinux_inode_permission+0xa9/0x170 [<ffffffff811acb54>] do_last+0x2d4/0x7a0 [<ffffffff811af743>] path_openat+0xb3/0x480 [<ffffffff8116a8a1>] ? handle_mm_fault+0x251/0x3b0 [<ffffffff811afc49>] do_filp_open+0x49/0xa0 [<ffffffff811bbaad>] ? __alloc_fd+0xdd/0x150 [<ffffffff8119da28>] do_sys_open+0x108/0x1f0 [<ffffffff8119db51>] sys_open+0x21/0x30 [<ffffffff81618959>] system_call_fastpath+0x16/0x1b Also fix comment for ext4_read_block_bitmap_nowait() Signed-off-by:
Eryu Guan <guaneryu@gmail.com> Signed-off-by:
-
Theodore Ts'o authored
commit 860d21e2 upstream. The only reason for sb_getblk() failing is if it can't allocate the buffer_head. So ENOMEM is more appropriate than EIO. In addition, make sure that the file system is marked as being inconsistent if sb_getblk() fails. Signed-off-by:
-
Dan Carpenter authored
commit 30ebc5e4 upstream. We recently introduced a new return -ENODEV in this function but we need to unlock before returning. [mchehab@redhat.com: found two patches with the same fix. Merged SOB's/acks into one patch] Acked-by:
Herton R. Krzesinski <herton.krzesinski@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Douglas Bagnall <douglas@paradise.net.nz> Signed-off-by:
-
Al Viro authored
commit 55ee64b3 upstream. Walking rbtree while it's modified is a Bad Idea(tm); besides, the result of find_vma() can be freed just as it's getting returned to caller. Fortunately, it's easy to fix - just take ->mmap_sem a bit earlier (and don't bother with find_vma() at all if virtp >= PAGE_OFFSET - in that case we don't even look at its result). While we are at it, what prevents VIDIOC_PREPARE_BUF calling v4l_prepare_buf() -> (e.g) vb2_ioctl_prepare_buf() -> vb2_prepare_buf() -> __buf_prepare() -> __qbuf_userptr() -> vb2_vmalloc_get_userptr() -> find_vma(), AFAICS without having taken ->mmap_sem anywhere in process? The code flow is bloody convoluted and depends on a bunch of things done by initialization, so I certainly might've missed something... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Sakari Ailus <sakari.ailus@iki.fi> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Archit Taneja <archit@ti.com> Cc: Prabhakar Lad <prabhakar.lad@ti.com> Signed-off-by:
-
Laurent Pinchart authored
commit 317efce9 upstream. When subdev registration fails the subdev v4l2_dev field is left to a non-NULL value. Later calls to v4l2_device_unregister_subdev() will consider the subdev as registered and will module_put() the subdev module without any matching module_get(). Fix this by setting the subdev v4l2_dev field to NULL in v4l2_device_register_subdev() when the function fails. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
