Pull more RTC updates from Alexandre Belloni:
 "A second pull request for v4.6 with a few fixesi before -rc1.  The new
  features for abx80x actually make the RTC behave correctly.

  Drivers:
   - abx80x: handle both XT and RC oscillators, XT failure bit and
     autocalibration
   - m41t80: avoid out of range year values
   - rv8803: workaround an i2c HW issue"

* tag 'rtc-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: abx80x: handle the oscillator failure bit
  rtc: abx80x: handle autocalibration
  rtc: rv8803: workaround i2c HW issue
  rtc: mcp795: add devicetree support
  rtc: asm9260: remove incorrect __init/__exit annotations
  rtc: m41t80: avoid out of range year values
  rtc: s3c: Don't print an error on probe deferral
  rtc: rv3029: stop mentioning rv3029c2

Merge tag 'hwmon-for-linus-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull more hwmon updates from Guenter Roeck:
 "Update hwmon mailing list and web page"

* tag 'hwmon-for-linus-v4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  MAINTAINERS: Update mailing list and web page for hwmon subsystem

Pull block fixes from Jens Axboe:
 "Final round of fixes for this merge window - some of this has come up
  after the initial pull request, and some of it was put in a post-merge
  branch before the merge window.

  This contains:

   - Fix for a bad check for an error on dma mapping in the mtip32xx
     driver, from Alexey Khoroshilov.

   - A set of fixes for lightnvm, from Javier, Matias, and Wenwei.

   - An NVMe completion record corruption fix from Marta, ensuring that
     we read things in the right order.

   - Two writeback fixes from Tejun, marked for stable@ as well.

   - A blk-mq sw queue iterator fix from Thomas, fixing an oops for
     sparse CPU maps.  They hit this in the hot plug/unplug rework"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: avoid cqe corruption when update at the same time as read
  writeback, cgroup: fix use of the wrong bdi_writeback which mismatches the inode
  writeback, cgroup: fix premature wb_put() in locked_inode_to_wb_and_lock_list()
  blk-mq: Use proper cpumask iterator
  mtip32xx: fix checks for dma mapping errors
  lightnvm: do not load L2P table if not supported
  lightnvm: do not reserve lun on l2p loading
  nvme: lightnvm: return ppa completion status
  lightnvm: add a bitmap of luns
  lightnvm: specify target's logical address area
  null_blk: add lightnvm null_blk device to the nullb_list

Pull MTD updates from Brian Norris:
 "NAND:
   - Add sunxi_nand randomizer support
   - begin refactoring NAND ecclayout structs
   - fix pxa3xx_nand dmaengine usage
   - brcmnand: fix support for v7.1 controller
   - add Qualcomm NAND controller driver

  SPI NOR:
   - add new ls1021a, ls2080a support to Freescale QuadSPI
   - add new flash ID entries
   - support bottom-block protection for Winbond flash
   - support Status Register Write Protect
   - remove broken QPI support for Micron SPI flash

  JFFS2:
   - improve post-mount CRC scan efficiency

  General:
   - refactor bcm63xxpart parser, to later extend for NAND
   - add writebuf size parameter to mtdram

  Other minor code quality improvements"

* tag 'for-linus-20160324' of git://git.infradead.org/linux-mtd: (72 commits)
  mtd: nand: remove kerneldoc for removed function parameter
  mtd: nand: Qualcomm NAND controller driver
  dt/bindings: qcom_nandc: Add DT bindings
  mtd: nand: don't select chip in nand_chip's block_bad op
  mtd: spi-nor: support lock/unlock for a few Winbond chips
  mtd: spi-nor: add TB (Top/Bottom) protect support
  mtd: spi-nor: add SPI_NOR_HAS_LOCK flag
  mtd: spi-nor: use BIT() for flash_info flags
  mtd: spi-nor: disallow further writes to SR if WP# is low
  mtd: spi-nor: make lock/unlock bounds checks more obvious and robust
  mtd: spi-nor: silently drop lock/unlock for already locked/unlocked region
  mtd: spi-nor: wait for SR_WIP to clear on initial unlock
  mtd: nand: simplify nand_bch_init() usage
  mtd: mtdswap: remove useless if (!mtd->ecclayout) test
  mtd: create an mtd_oobavail() helper and make use of it
  mtd: kill the ecclayout->oobavail field
  mtd: nand: check status before reporting timeout
  mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'
  mtd: mtdram: Add parameter for setting writebuf size
  mtd: nand: pxa3xx_nand: kill unused field 'drcmr_cmd'
  ...

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains cleanups and a maintainer update for UBI and UBIFS"

* tag 'upstream-4.6-rc1' of git://git.infradead.org/linux-ubifs:
  ubifs: Remove unused header
  MAINTAINERS: Update UBIFS entry
  mtd: ubi: Add logging functions ubi_msg, ubi_warn and ubi_err
  ubifs: Add logging functions for ubifs_msg, ubifs_err and ubifs_warn

Pull more nfsd updates from Bruce Fields:
 "Apologies for the previous request, which omitted the top 8 commits
  from my for-next branch (including the SCSI layout commits).  Thanks
  to Trond for spotting my error!"

This actually includes the new layout types, so here's that part of
the pull message repeated:

 "Support for a new pnfs layout type from Christoph Hellwig.  The new
  layout type is a variant of the block layout which uses SCSI features
  to offer improved fencing and device identification.

  Note this pull request also includes the client side of SCSI layout,
  with Trond's permission"

* tag 'nfsd-4.6-1' of git://linux-nfs.org/~bfields/linux:
  nfsd: use short read as well as i_size to set eof
  nfsd: better layoutupdate bounds-checking
  nfsd: block and scsi layout drivers need to depend on CONFIG_BLOCK
  nfsd: add SCSI layout support
  nfsd: move some blocklayout code
  nfsd: add a new config option for the block layout driver
  nfs/blocklayout: add SCSI layout support
  nfs4.h: add SCSI layout definitions

Pull kbuild misc updates from Michal Marek:
 "The non-critical part of kbuild for v4.6-rc1:

   - coccinelle cleanup and a new patch
   - make tags rule for kprobe helpers
   - make rpm fix to avoid spurious grub2 entries
   - make rpm support for %postun script (Fedora only at the moment)"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild/mkspec: clean boot loader configuration on rpm removal
  kbuild/mkspec: fix grub2 installkernel issue
  Coccinelle: Add api/setup_timer.cocci
  coccinelle: bugon: reduce rule applicability
  Coccinelle: pm_runtime: reduce rule applicability
  Coccinelle: array_size: reduce rule applicability
  Coccinelle: reduce rule applicability
  scripts/tags.sh: add regex to map kprobe helpers
  scripts/coccinelle: modernize &

Pull kconfig updates from Michal Marek:
 "Just two kconfig commits this time:

   - kconfig Makefile fix for make 3.80

   - Fix calculating symbols so that KCONFIG_ALLCONFIG=... does not
     disable CONFIG_MODULES silently"

* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  unbreak allmodconfig KCONFIG_ALLCONFIG=...
  scripts/kconfig: allow building with make 3.80 again

Pull kbuild updates from Michal Marek:

 - make dtbs_install fix

 - Error handling fix fixdep and link-vmlinux.sh

 - __UNIQUE_ID fix for clang

 - Fix for if_changed_* to suppress the "is up to date." message

 - The kernel is built with -Werror=incompatible-pointer-types

* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: Add option to turn incompatible pointer check into error
  kbuild: suppress annoying "... is up to date." message
  kbuild: fixdep: Check fstat(2) return value
  scripts/link-vmlinux.sh: force error on kallsyms failure
  Kbuild: provide a __UNIQUE_ID for clang
  dtbsinstall: don't move target directory out of the way

Pull parisc updates from Helge Deller:
 "This patchset adds stack usage debug info for parisc and metag (on
  both the stack grows upwards), switches to the new generic realative
  extable search and sort routines, drops the long time ago removed
  syscalls alloc_hugepages and free_hugepages and wires up the new
  preadv2 and pwritev2 syscalls"

* 'parisc-4.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Wire up preadv2 and pwritev2 syscalls
  parisc: Use generic extable search and sort routines
  parisc: Panic immediately when panic_on_oops
  parisc,metag: Implement CONFIG_DEBUG_STACK_USAGE option
  parisc: Drop alloc_hugepages and free_hugepages syscalls

Pull second set of arm64 updates from Catalin Marinas:

 - KASLR bug fixes: use callee-saved register, boot-time I-cache
   maintenance

 - inv_entry asm macro fix (EL0 check typo)

 - pr_notice("Virtual kernel memory layout...") splitting

 - Clean-ups: use p?d_set_huge consistently, allow preemption around
   copy_to_user_page, remove unused __local_flush_icache_all()

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: allow preemption in copy_to_user_page
  arm64: consistently use p?d_set_huge
  arm64: kaslr: use callee saved register to preserve SCTLR across C call
  arm64: Split pr_notice("Virtual kernel memory layout...") into multiple pr_cont()
  arm64: drop unused __local_flush_icache_all()
  arm64: fix KASLR boot-time I-cache maintenance
  arm64/kernel: fix incorrect EL0 check in inv_entry macro

Pull more ARM DT changes from Arnd Bergmann:
 "Here are some final updates for ARM SoC specific dts files:

   - The i.MX changes were sent relatively late, and had a dependency on
     the clk tree, so I delayed that a bit.  Support for the new i.MX6qp
     SoC and a couple of new boards is added in this branch.

   - Uniphier renames a few files to match the final product names that
     were decided by the company, kudos to the kernel developer(s) for
     getting support upstream before the product release.  Also two
     boards are added.  The patches were posted early enough and nice
     overall, but we forgot to apply them and decided to give it some
     more time in linux-next

   - at91 has two small bug fixes"

* tag 'armsoc-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (83 commits)
  ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
  ARM: dts: uniphier: add pinmux node for I2C ch4
  ARM: dts: uniphier: add @{address} to EEPROM node
  ARM: dts: uniphier: add PH1-Pro4 Sanji board support
  ARM: dts: uniphier: add PH1-Pro4 Ace board support
  ARM: dts: uniphier: enable I2C channel 2 of ProXstream2 Gentil board
  ARM: dts: uniphier: add EEPROM node for ProXstream2 Gentil board
  ARM: dts: uniphier: add reference clock nodes
  ARM: dts: uniphier: rework UniPhier System Bus nodes
  ARM: dts: uniphier: factor out ranges property of support card
  arm64: dts: uniphier: rename PH1-LD10 to PH1-LD20
  ARM: dts: imx53-qsb: Fix gpio button polarity
  ARM: dts: vfxxx: Add DAC node for Vybrid SoC
  ARM: dts: imx6q: add missing links between ipu2 and mipi dsi
  ARM: dts: imx: Add support for Advantech/GE B850v3
  ARM: dts: imx: Add support for Advantech/GE B650v3
  ARM: dts: imx: Add support for Advantech/GE B450v3
  ARM: dts: imx: Add support for Advantech/GE Bx50v3
  ARM: dts: imx: Add Advantech BA-16 Qseven module
  ...

Pull h8300 updates from Yoshinori Sato:
 "Various h8300 fixes"

* tag 'for-4.6' of git://git.osdn.jp/gitroot/uclinux-h8/linux:
  h8300: switch EARLYCON
  h8300: dts: Rename the serial port clock to fck

Handle the Oscillator Failure ('OF') bit from Oscillator Status register
(0x1D). This bit is cleared on set_time function and is read each time the
date/time is read, but only in case of XT Oscillator selection.
In RC mode, this bit is always set.
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The autocalibration is separated in two bits to set in Oscillator
Control register (0x1c) :
 - OSEL bit to select the oscillator type (XT or RC).
 - ACAL bit to select the autocalibration type.

These functionnalities are exported in sysfs entries : "oscillator"
and "autocalibration". Respectively, the values are "xtal" for XT
oscillator and "rc" for RC oscillator and 0 to disable the
autocalibration cycle, 512 for a 512 seconds autocalibration cycle
and 1024 for a cycle of 1024 seconds.

Examples :
Set to XT Oscillator
echo xtal > /sys/class/rtc/rtc0/device/oscillator
Activate an autocalibration every 512 seconds
echo 512 > /sys/class/rtc/rtc0/device/autocalibration
Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The rv8803 has a 60µs window where it will not answer on the i2c bus.
It also means there will be no ack for the communication. Make sure
communication is tried multiple times when this happens (the i2c subsystem
mandates -ENXIO is that case but the number of retries is host specific).
The critical parts are the probe function and the alarm callback so make
sure we handle the failure there.

Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

The old web page for the hwmon subsystem is no longer operational,
and the mailing list has become unreliable. Move both to kernel.org.
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Pull tracing updates from Steven Rostedt:
 "Nothing major this round.  Mostly small clean ups and fixes.

  Some visible changes:

   - A new flag was added to distinguish traces done in NMI context.

   - Preempt tracer now shows functions where preemption is disabled but
     interrupts are still enabled.

  Other notes:

   - Updates were done to function tracing to allow better performance
     with perf.

   - Infrastructure code has been added to allow for a new histogram
     feature for recording live trace event histograms that can be
     configured by simple user commands.  The feature itself was just
     finished, but needs a round in linux-next before being pulled.

     This only includes some infrastructure changes that will be needed"

* tag 'trace-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (22 commits)
  tracing: Record and show NMI state
  tracing: Fix trace_printk() to print when not using bprintk()
  tracing: Remove redundant reset per-CPU buff in irqsoff tracer
  x86: ftrace: Fix the misleading comment for arch/x86/kernel/ftrace.c
  tracing: Fix crash from reading trace_pipe with sendfile
  tracing: Have preempt(irqs)off trace preempt disabled functions
  tracing: Fix return while holding a lock in register_tracer()
  ftrace: Use kasprintf() in ftrace_profile_tracefs()
  ftrace: Update dynamic ftrace calls only if necessary
  ftrace: Make ftrace_hash_rec_enable return update bool
  tracing: Fix typoes in code comment and printk in trace_nop.c
  tracing, writeback: Replace cgroup path to cgroup ino
  tracing: Use flags instead of bool in trigger structure
  tracing: Add an unreg_all() callback to trigger commands
  tracing: Add needs_rec flag to event triggers
  tracing: Add a per-event-trigger 'paused' field
  tracing: Add get_syscall_name()
  tracing: Add event record param to trigger_ops.func()
  tracing: Make event trigger functions available
  tracing: Make ftrace_event_field checking functions available
  ...

Pull thermal updates from Zhang Rui:

 - Fix a regression where bogus trip points on some Lenovo laptops start
   to screw up thermal control after commit 81ad4276 ("Thermal:
   initialize thermal zone device correctly").

   On these Lenovo laptops, a bogus passive trip point is reported,
   which is 0 degree Celsius.  Without commit 81ad4276, thermal zone
   fails to set cooling devices to proper cooling state, which is a bug.
   But with commit 81ad4276 applied, the processors are always
   throttled on these Lenovo laptops because the current temperature is
   always higher than the passive trip point.

   Fix things to ignore such bogus trip points.  (Zhang Rui)

 - Introduce Mediatek thermal driver.  (Sascha Hauer)

 - Introduce devm_ versions of OF thermal sensor register API.  (Laxman
   Dewangan)

 - Changes in Kconfigs to allow compile test on UM arch.  (Krzysztof
   Kozlowski)

 - Introduce Skylake support in intel_pch_thermal driver.  (Srinivas
   Pandruvada)

 - Several small fixes on Rockchip, TI-SoC, Tegra, RCar, and Exynos
   thermal drivers.

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (26 commits)
  Thermal: Ignore invalid trip points
  thermal: trace: migrating thermal traces to use TRACE_DEFINE_ENUM() macros
  thermal: intel_pch_thermal: Enable Skylake PCH thermal
  thermal: doc: Add details of devm_thermal_zone_of_sensor_{register,unregister}
  thermal: of-thermal: Add devm version of thermal_zone_of_sensor_register
  thermal: doc: Add details of thermal_zone_of_sensor_{register,unregister}
  thermal: exynos: Defer probe if vtmu is present but not registered
  thermal: exynos: Use devm_regulator_get_optional() for vtmu
  thermal: exynos: List vtmu-supply as optional property in DT binding
  thermal: exynos: Print a message about exceeded number of supported trip-points
  thermal: exynos: Document number of supported trip-points
  thermal: exynos: Document compatible for Exynos5433 TMU
  thermal: mtk: allow compile testing on UM
  thermal: tegra_soctherm: fix sign bit of temperature
  thermal: Fix build error of missing devm_ioremap_resource on UM
  thermal: ti-soc-thermal: clean up the error handling a bit
  thermal: rcar: Use ARCH_RENESAS
  thermal: rcar_thermal: don't open code of_device_get_match_data()
  thermal: db8500_cpufreq_cooling: Compile with COMPILE_TEST
  thermal: rockchip: fix the tsadc sequence output on rk3228/rk3399
  ...

Pull nfsd updates from Bruce Fields:
 "Various bugfixes, a RDMA update from Chuck Lever, and support for a
  new pnfs layout type from Christoph Hellwig.  The new layout type is a
  variant of the block layout which uses SCSI features to offer improved
  fencing and device identification.

  (Also: note this pull request also includes the client side of SCSI
  layout, with Trond's permission.)"

* tag 'nfsd-4.6' of git://linux-nfs.org/~bfields/linux:
  sunrpc/cache: drop reference when sunrpc_cache_pipe_upcall() detects a race
  nfsd: recover: fix memory leak
  nfsd: fix deadlock secinfo+readdir compound
  nfsd4: resfh unused in nfsd4_secinfo
  svcrdma: Use new CQ API for RPC-over-RDMA server send CQs
  svcrdma: Use new CQ API for RPC-over-RDMA server receive CQs
  svcrdma: Remove close_out exit path
  svcrdma: Hook up the logic to return ERR_CHUNK
  svcrdma: Use correct XID in error replies
  svcrdma: Make RDMA_ERROR messages work
  rpcrdma: Add RPCRDMA_HDRLEN_ERR
  svcrdma: svc_rdma_post_recv() should close connection on error
  svcrdma: Close connection when a send error occurs
  nfsd: Lower NFSv4.1 callback message size limit
  svcrdma: Do not send Write chunk XDR pad with inline content
  svcrdma: Do not write xdr_buf::tail in a Write chunk
  svcrdma: Find client-provided write and reply chunks once per reply
  nfsd: Update NFS server comments related to RDMA support
  nfsd: Fix a memory leak when meeting unsupported state_protect_how4
  nfsd4: fix bad bounds checking

Pull staging driver fixes from Greg KH:
 "Here are some fixes that poped up due to the big staging tree merge,
  as well as the removal of a staging driver that now is covered by a
  "real" driver.

  All of these have been in linux-next for a few days with no reported
  issues"

* tag 'staging-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: delete STE RMI4 hackish driver
  staging: android: ion_test: fix check of platform_device_register_simple() error code
  staging: wilc1000: fix a couple of memory leaks
  staging: fsl-mc: fix incorrect type passed to dev_err macros
  staging: fsl-mc: fix incorrect type passed to dev_dbg macros
  staging: wilc1000: fixed kernel panic when firmware is not started
  staging: comedi: ni_mio_common: fix the ni_write[blw]() functions
  staging: most: hdm-dim2: Remove possible dereference error
  staging: lustre: checking for NULL instead of IS_ERR
  staging: lustre: really make lustre dependent on LNet
  staging: refresh TODO for rtl8712
  staging: refresh TODO for rtl8723au

Pull timer fix from Thomas Gleixner:
 "A single fix to the pistachio clocksource driver using the proper
  signedness in the error print format"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/pistachio: Correct output format of PTR_ERR()

Pull irq fixes from Thomas Gleixner:
 "A small set of fixes for the usual ARM/SOC irqchip drivers

   - A set of fixes for mbigen to handle multiple devices in a hardware
     module proper

   - A cleanup for the mbigen config option which was pointlessly user
     configurable.

   - A cleanup for tegra replacing open coded functionality by the
     proper core function

  The config cleanup touches arch/arm64/Kconfig.platforms to select the
  irq chip for the related platform"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mbigen: Make CONFIG_HISILICON_IRQ_MBIGEN a hidden option
  ARM64: Kconfig: Select mbigen interrupt controller on Hisilicon platform
  irqchip/mbigen: Handle multiple device nodes in a mbigen module
  irqchip/mbigen: Adjust DT bindings to handle multiple devices in a module
  irqchip/tegra: Switch to use irq_domain_free_irqs_common

Pull perf fixes from Ingo Molnar:
 "This tree contains various perf fixes on the kernel side, plus three
  hw/event-enablement late additions:

   - Intel Memory Bandwidth Monitoring events and handling
   - the AMD Accumulated Power Mechanism reporting facility
   - more IOMMU events

  ... and a final round of perf tooling updates/fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
  perf llvm: Use strerror_r instead of the thread unsafe strerror one
  perf llvm: Use realpath to canonicalize paths
  perf tools: Unexport some methods unused outside strbuf.c
  perf probe: No need to use formatting strbuf method
  perf help: Use asprintf instead of adhoc equivalents
  perf tools: Remove unused perf_pathdup, xstrdup functions
  perf tools: Do not include stringify.h from the kernel sources
  tools include: Copy linux/stringify.h from the kernel
  tools lib traceevent: Remove redundant CPU output
  perf tools: Remove needless 'extern' from function prototypes
  perf tools: Simplify die() mechanism
  perf tools: Remove unused DIE_IF macro
  perf script: Remove lots of unused arguments
  perf thread: Rename perf_event__preprocess_sample_addr to thread__resolve
  perf machine: Rename perf_event__preprocess_sample to machine__resolve
  perf tools: Add cpumode to struct perf_sample
  perf tests: Forward the perf_sample in the dwarf unwind test
  perf tools: Remove misplaced __maybe_unused
  perf list: Fix documentation of :ppp
  perf bench numa: Fix assertion for nodes bitfield
  ...

Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt2

Merge "First fixes batch for AT91 on 4.6 - DT only fixes" from Nicolas Ferre:
- prevent the boards from having glitches when inserting/removing SD card on
  sama5d3/d4 Xplained. The regulators should be kept on.

* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d4 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d3 Xplained: don't disable hsmci regulator
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node

Pull x86 fixes from Ingo Molnar:
 "Misc fixes:

   - fix hotplug bugs
   - fix irq live lock
   - fix various topology handling bugs
   - fix APIC ACK ordering
   - fix PV iopl handling
   - fix speling
   - fix/tweak memcpy_mcsafe() return value
   - fix fbcon bug
   - remove stray prototypes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/msr: Remove unused native_read_tscp()
  x86/apic: Remove declaration of unused hw_nmi_is_cpu_stuck
  x86/oprofile/nmi: Add missing hotplug FROZEN handling
  x86/hpet: Use proper mask to modify hotplug action
  x86/apic/uv: Fix the hotplug notifier
  x86/apb/timer: Use proper mask to modify hotplug action
  x86/topology: Use total_cpus not nr_cpu_ids for logical packages
  x86/topology: Fix Intel HT disable
  x86/topology: Fix logical package mapping
  x86/irq: Cure live lock in fixup_irqs()
  x86/tsc: Prevent NULL pointer deref in calibrate_delay_is_known()
  x86/apic: Fix suspicious RCU usage in smp_trace_call_function_interrupt()
  x86/iopl: Fix iopl capability check on Xen PV
  x86/iopl/64: Properly context-switch IOPL on Xen PV
  selftests/x86: Add an iopl test
  x86/mm, x86/mce: Fix return type/value for memcpy_mcsafe()
  x86/video: Don't assume all FB devices are PCI devices
  arch/x86/irq: Purge useless handler declarations from hw_irq.h
  x86: Fix misspellings in comments

earlyprintk is architecture specific option.
earlycon is generic and small footprint.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>

The clock is really the device functional clock, not the interface
clock. Rename it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

Pull scheduler fixes from Ingo Molnar:
 "Misc fixes: a cgroup fix, a fair-scheduler migration accounting fix, a
  cputime fix and two cpuacct cleanups"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/cpuacct: Simplify the cpuacct code
  sched/cpuacct: Rename parameter in cpuusage_write() for readability
  sched/fair: Add comments to explain select_idle_sibling()
  sched/fair: Fix fairness issue on migration
  sched/cgroup: Fix/cleanup cgroup teardown/init
  sched/cputime: Fix steal time accounting vs. CPU hotplug

Pull locking fixes from Ingo Molnar:
 "Documentation updates and a bitops ordering fix"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  bitops: Do not default to __clear_bit() for __clear_bit_unlock()
  documentation: Clarify compiler store-fusion example
  documentation: Transitivity is not cumulativity
  documentation:  Add alternative release-acquire outcome
  documentation: Distinguish between local and global transitivity
  documentation: Subsequent writes ordered by rcu_dereference()
  documentation: Remove obsolete reference to RCU-protected indexes
  documentation: Fix memory-barriers.txt section references
  documentation: Fix control dependency and identical stores

Currently we disable preemption in copy_to_user_page; a behaviour that
we inherited from the 32-bit arm code. This was necessary for older
cores without broadcast data cache maintenance, and ensured that cache
lines were dirtied and cleaned by the same CPU. On these systems dirty
cache line migration was not possible, so this was sufficient to
guarantee coherency.

On contemporary systems, cache coherence protocols permit (dirty) cache
lines to migrate between CPUs as a result of speculation, prefetching,
and other behaviours. To account for this, in ARMv8 data cache
maintenance operations are broadcast and affect all data caches in the
domain associated with the VA (i.e. ISH for kernel and user mappings).

In __switch_to we ensure that tasks can be safely migrated in the middle
of a maintenance sequence, using a dsb(ish) to ensure prior explicit
memory accesses are observed and cache maintenance operations are
completed before a task can be run on another CPU.

Given the above, it is not necessary to disable preemption in
copy_to_user_page. This patch removes the preempt_{disable,enable}
calls, permitting preemption.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Commit 324420bf ("arm64: add support for ioremap() block
mappings") added new p?d_set_huge functions which do the hard work to
generate and set a correct block entry.

These differ from open-coded huge page creation in the early page table
code by explicitly setting the P?D_TYPE_SECT bits (which are implicitly
retained by mk_sect_prot() for any valid prot), but are otherwise
identical (and cannot fail on arm64).

For simplicity and consistency, make use of these in the initial page
table creation code.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The KASLR code incorrectly expects the contents of x18 to be preserved
across a call into C code, and uses it to stash the contents of SCTLR_EL1
before enabling the MMU. If the MMU needs to be disabled again to create
the randomized kernel mapping, x18 is written back to SCTLR_EL1, which is
likely to crash the system if x18 has been clobbered by kasan_early_init()
or kaslr_early_init(). So use x22 instead, which is not in use so far in
head.S
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'perf-core-for-mingo-20160323' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes:

User visible fixes:

 - Fix documentation of :ppp modifier in 'perf list' (Andi Kleen)

 - Fix silly nodes bitfield bits/bytes length assertion in 'perf bench numa' (Jakub Jelen)

 - Remove redundant CPU output in libtraceevent (Steven Rostedt)

 - Remove 'core_id' check in topology 'perf test' (Sukadev Bhattiprolu)

Infrastructure changes/fixes:

 - Record text offset in dso to calculate objdump address, to use with
   modules in addition to vDSO symbol address calculations (Wang Nan)

 - Move utilities.mak from perf to tools/scripts/ (Arnaldo Carvalho de Melo)

 - Add cpumode to the perf_sample struct, this way we don't need to pass
   the union event to the machine and thread resolving routines, shortening
   function signatures and allowing the future introduction of a way
   to use tracepoint events instead of the unavailable HW cycles counter on
   powerpc guests in perf kvm by just hooking on perf_evsel__parse_sample,
   at the end (Arnaldo Carvalho de Melo)

 - Remove/unexport die() related infrastructure, that at some point will
   finally be removed (Arnaldo Carvalho de Melo)

 - Adopt linux/stringify.h from the kernel sources, not to touch this
   kernel header from tools/ (Arnaldo Carvalho de Melo)

 - Stop using strbuf for things we can instead trivially use libc's asprintf()
   (Arnaldo Carvalho de Melo)

 - Ditch tools/lib/util/abspath.c, its only exported function was used at just
   one place and can be replaced by libc's realpath() (Arnaldo Carvalho de Melo)

 - Use strerror_r() in the llvm infrastructure, tread safe, its what is used
   elsewhere in tools/perf/ (Arnaldo Carvalho de Melo)

Cleanups:

 - Removed misplaced or needless __maybe_unused/export (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull networking bugfixes from David Miller:
 "Several bug fixes rolling in, some for changes introduced in this
  merge window, and some for problems that have existed for some time:

  1) Fix prepare_to_wait() handling in AF_VSOCK, from Claudio Imbrenda.

  2) The new DST_CACHE should be a silent config option, from Dave
     Jones.

  3) inet_current_timestamp() unintentionally truncates timestamps to
     16-bit, from Deepa Dinamani.

  4) Missing reference to netns in ppp, from Guillaume Nault.

  5) Free memory reference in hv_netvsc driver, from Haiyang Zhang.

  6) Missing kernel doc documentation for function arguments in various
     spots around the networking, from Luis de Bethencourt.

  7) UDP stopped receiving broadcast packets properly, due to
     overzealous multicast checks, fix from Paolo Abeni"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
  net: ping: make ping_v6_sendmsg static
  hv_netvsc: Fix the order of num_sc_offered decrement
  net: Fix typos and whitespace.
  hv_netvsc: Fix the array sizes to be max supported channels
  hv_netvsc: Fix accessing freed memory in netvsc_change_mtu()
  ppp: take reference on channels netns
  net: Reset encap_level to avoid resetting features on inner IP headers
  net: mediatek: fix checking for NULL instead of IS_ERR() in .probe
  net: phy: at803x: Request 'reset' GPIO only for AT8030 PHY
  at803x: fix reset handling
  AF_VSOCK: Shrink the area influenced by prepare_to_wait
  Revert "vsock: Fix blocking ops call in prepare_to_wait"
  macb: fix PHY reset
  ipv4: initialize flowi4_flags before calling fib_lookup()
  fsl/fman: Workaround for Errata A-007273
  ipv4: fix broadcast packets reception
  net: hns: bug fix about the overflow of mss
  net: hns: adds limitation for debug port mtu
  net: hns: fix the bug about mtu setting
  net: hns: fixes a bug of RSS
  ...

As ping_v6_sendmsg is used only in this file,
making it static

The body of "pingv6_prot" and "pingv6_protosw" were
moved at the middle of the file, to avoid having to
declare some static prototypes.
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Reorder the code in netvsc_sc_open(), so num_sc_offered is only decremented
after vmbus_open() is called. This avoid pontential race of removing device
before all channels are setup.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull x86 platform driver updates from Darren Hart:
 "Significant refactoring of Dell laptop drivers, modularizing the
  smbios code.  Multiple new platforms added for ideapad, asus, dell,
  and alienware using existing quirks.  A few fixes and cleanups.

  hp-wmi:
   - Remove GPS rfkill support via pre-2009 interface
   - fix unregister order in hp_wmi_rfkill_setup() once again

  ideapad-laptop:
   - Add ideapad Y700 (15) to the no_hw_rfkill DMI list

  fujitsu-laptop:
   - Support radio toggle button

  intel-hid:
   - allocate correct amount of memory for private struct

  platform/x86:
   - Make intel_scu_ipc explicitly non-modular

  intel_pmc_ipc:
   - Avoid pending IPC1 command during legacy suspend
   - Fix GCR register base address and length

  asus-nb-wmi:
   - add wapf=4 quirk for ASUS X75VD

  intel_telemetry_pltdrv:
   - Change verbosity control bits

  dell-rbtn:
   - Add a comment about the XPS 13 9350

  dell-wmi, dell-laptop:
   - depends DMI

  dell-wmi:
   - support Dell Inspiron M5110
   - properly process Dell Instant Launch hotkey
   - enable receiving WMI events on Dell Vostro V131
   - Support new hotkeys on the XPS 13 9350 (Skylake)
   - Clean up hotkey table size check
   - Stop storing pointers to DMI tables

  dell-laptop:
   - move dell_smi_error() to dell-smbios
   - use dell_smbios_find_token() instead of find_token_location()
   - use dell_smbios_find_token() instead of find_token_id()
   - extract SMBIOS-related code to a separate module

  dell-smbios:
   - rename dell_smi_error() to dell_smbios_error()
   - make da_tokens static
   - remove find_token_{id,location}()
   - implement new function for finding DMI table 0xDA tokens
   - make the SMBIOS buffer static
   - return the SMBIOS buffer from dell_smbios_get_buffer()
   - don't return an SMBIOS buffer from dell_smbios_send_request()
   - don't pass an SMBIOS buffer to dell_smbios_send_request()
   - rename dell_send_request() to dell_smbios_send_request()
   - rename release_buffer() to dell_smbios_release_buffer()
   - rename clear_buffer() to dell_smbios_clear_buffer()
   - rename get_buffer() to dell_smbios_get_buffer()

  dell-led:
   - use dell_smbios_send_request() for performing SMBIOS calls
   - use dell_smbios_find_token() for finding mic DMI tokens

  toshiba_acpi:
   - Add a module parameter to disable hotkeys registration
   - Add sysfs entries for the Cooling Method feature
   - Add support for cooling method feature

  Documentation/ABI:
   - Update sysfs-driver-toshiba_acpi file

  thinkpad_acpi:
   - Remove ambiguous logging for "Unsupported brightness interface"

  alienware-wmi:
   - whitespace improvements
   - Add support for two new systems: ASM200 and ASM201.
   - Add support for deep sleep control.
   - Add initial support for alienware graphics amplifier.
   - Add support for new platform: X51-R3
   - Clean up whitespace for ASM100 platform"

* tag 'platform-drivers-x86-v4.6-1' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: (47 commits)
  hp-wmi: Remove GPS rfkill support via pre-2009 interface
  hp-wmi: fix unregister order in hp_wmi_rfkill_setup() once again
  dell-wmi: support Dell Inspiron M5110
  dell-wmi: properly process Dell Instant Launch hotkey
  dell-wmi: enable receiving WMI events on Dell Vostro V131
  dell-smbios: rename dell_smi_error() to dell_smbios_error()
  dell-laptop: move dell_smi_error() to dell-smbios
  ideapad-laptop: Add ideapad Y700 (15) to the no_hw_rfkill DMI list
  fujitsu-laptop: Support radio toggle button
  intel-hid: allocate correct amount of memory for private struct
  platform/x86: Make intel_scu_ipc explicitly non-modular
  intel_pmc_ipc: Avoid pending IPC1 command during legacy suspend
  intel_pmc_ipc: Fix GCR register base address and length
  asus-nb-wmi: add wapf=4 quirk for ASUS X75VD
  intel_telemetry_pltdrv: Change verbosity control bits
  dell-rbtn: Add a comment about the XPS 13 9350
  dell-wmi: Support new hotkeys on the XPS 13 9350 (Skylake)
  dell-wmi: Clean up hotkey table size check
  dell-wmi, dell-laptop: depends DMI
  dell-wmi: Stop storing pointers to DMI tables
  ...

Merge tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "No new drivers this time around, but a handful of cleanups and fixes"

* tag 'pwm/for-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: omap-dmtimer: Add debug message for effective period and duty cycle
  pwm: omap-dmtimer: Round load and match values rather than truncate
  pwm: omap-dmtimer: Add sanity checking for load and match values
  pwm: omap-dmtimer: Fix inaccurate period and duty cycle calculations
  pwm: brcmstb: Fix check of devm_ioremap_resource() return code
  pwm: rcar: Depend on ARCH_RENESAS instead of ARCH_SHMOBILE
  pwm: lpc18xx-sct: Test clock rate to avoid division by 0
  pwm: img: Test clock rate to avoid division by 0

Pull more SCSI target updates from Nicholas Bellinger:
 "This series contains cxgb4 driver prerequisites for supporting iscsi
  segmentation offload (ISO), that will be utilized for a number of
  future v4.7 developments in iscsi-target for supporting generic hw
  offloads"

* 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  cxgb4: update Kconfig and Makefile
  cxgb4: add iSCSI DDP page pod manager
  cxgb4, iw_cxgb4: move delayed ack macro definitions
  cxgb4: move VLAN_NONE macro definition
  cxgb4: update struct cxgb4_lld_info definition
  cxgb4: add definitions for iSCSI target ULD
  cxgb4, cxgb4i: move struct cpl_rx_data_ddp definition
  cxgb4, iw_cxgb4, cxgb4i: remove duplicate definitions
  cxgb4, iw_cxgb4: move definitions to common header file
  cxgb4: large receive offload support
  cxgb4: allocate resources for CXGB4_ULD_ISCSIT
  cxgb4: add new ULD type CXGB4_ULD_ISCSIT