- 12 Jan, 2013 9 commits
-
-
Antonio Quartulli authored
The flag field of the tt_local_entry->common structure in tt_local_add() is first assigned NO_FLAGS and then TT_CLIENT_NEW so nullifying the first operation. For this reason it is safe to remove the first assignment. This was introuduced by ("batman-adv: keep local table consistency for further TT_RESPONSE") Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
Values are printed in hexadecimal format in several points in the code, but they are not printed using the same format string. This patches unifies the format used for such numbers so that they look the same everywhere. Given the fact that all the variables printed as hexadecimal are 16 bit long, this is the chosen printing format: %#.4x Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
To simplify debugging operations, it is better to print the related CRC together with the translation table (local CRC for the local table and global CRC for each entry in the global table) Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
This patch adds a nice header to the local translation table and the last_seen time for each local entry Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Antonio Quartulli authored
The current timeout is set to one hour. However a client connected to the mesh network will always generate traffic. In the worst case it will send ARP requests every 4 or 5 minutes. On the other hand having a long timeout means storing dead entries for one hour and it leads to very big trans-tables containing useless clients. This patch reduces the timeout to 10 minutes Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
-
Linus Lüssing authored
The current translation table mechanism is not suitable for multicast addresses and we are currently flooding such frames anyway. Therefore this patch prevents multicast MAC addresses being added to the translation table. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Acked-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Shan Wei authored
this_cpu_add is an atomic operation. and be more faster than per_cpu_ptr operation. Signed-off-by: Shan Wei <davidshan@tencent.com> Reviewed-by: Christoph Lameter <cl@linux.com> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Antonio Quartulli <ordex@autistici.org>
-
Paul Gortmaker authored
Output of a git grep happened to make me look into this file, and I found instructions about how to hand patch (without using patch) the driver into the kernel tree. Since the driver has been a part of the mainline kernel for years, we can dump this whole section. Fortunately it doesn't even cause a renumbering of the sections to do so. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit 9ca1b22d (net: splice: avoid high order page splitting) forgot that skb->head could need a copy into several page frags. This could be the case for loopback traffic mostly. Also remove now useless skb argument from linear_to_page() and __splice_segment() prototypes. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 11 Jan, 2013 9 commits
-
-
Kim Phillips authored
in/out_be32 accessors are Power arch centric whereas ioread/writebe32 are available in other arches. Also, unlike in/out_be32, ioread/writebe32 expect non-volatile address arguments. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rami Rosen authored
In fib_frontend.c, there is a confusing comment; NETLINK_CB(skb).portid does not refer to a pid of sending process, but rather to a netlink portid. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
When testing with FCoE enabled we discovered that I had not exported __netdev_pick_tx. As a result ixgbe doesn't build with the RFC patches applied because ixgbe_select_queue was calling the function. This change corrects that build issue by correctly exporting __netdev_pick_tx so it can be used by modules. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
There is a missing break statement so FLASH_5762_EEPROM_HD gets treated like FLASH_5762_EEPROM_LD. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch makes it so that we can support transmit packet steering without sysfs needing to be enabled. The reason for making this change is to make it so that a driver can make use of the XPS even while the sysfs portion of the interface is not present. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This change is meant to address several issues I found within the netif_set_xps_queues function. If the allocation of one of the maps to be assigned to new_dev_maps failed we could end up with the device map in an inconsistent state since we had already worked through a number of CPUs and removed or added the queue. To address that I split the process into several steps. The first of which is just the allocation of updated maps for CPUs that will need larger maps to store the queue. By doing this we can fail gracefully without actually altering the contents of the current device map. The second issue I found was the fact that we were always allocating a new device map even if we were not adding any queues. I have updated the code so that we only allocate a new device map if we are adding queues, otherwise if we are not adding any queues to CPUs we just skip to the removal process. The last change I made was to reuse the code from remove_xps_queue to remove the queue from the CPU. By making this change we can be consistent in how we go about adding and removing the queues from the CPUs. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch does a minor refactor on netif_reset_xps_queue to address a few items I noticed. First is the fact that we are doing removal of queues in both netif_reset_xps_queue and netif_set_xps_queue. Since there is no need to have the code in two places I am pushing it out into a separate function and will come back in another patch and reuse the code in netif_set_xps_queue. The second item this change addresses is the fact that the Tx queues were not getting their numa_node value cleared as a part of the XPS queue reset. This patch resolves that by resetting the numa_node value if the dev_maps value is set. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This patch adds two functions, netif_reset_xps_queue and netif_set_xps_queue. The main idea behind these two functions is to provide a mechanism through which drivers can update their defaults in regards to XPS. Currently no such mechanism exists and as a result we cannot use XPS for things such as ATR which would require a basic configuration to start in which the Tx queues are mapped to CPUs via a 1:1 mapping. With this change I am making it possible for drivers such as ixgbe to be able to use the XPS feature by controlling the default configuration. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
This change splits the core bits of netdev_pick_tx into a separate function. The main idea behind this is to make this code accessible to select queue functions when they decide to process the standard path instead of their own custom path in their select queue routine. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 10 Jan, 2013 20 commits
-
-
Eric Dumazet authored
In various network workloads, __do_softirq() latencies can be up to 20 ms if HZ=1000, and 200 ms if HZ=100. This is because we iterate 10 times in the softirq dispatcher, and some actions can consume a lot of cycles. This patch changes the fallback to ksoftirqd condition to : - A time limit of 2 ms. - need_resched() being set on current task When one of this condition is met, we wakeup ksoftirqd for further softirq processing if we still have pending softirqs. Using need_resched() as the only condition can trigger RCU stalls, as we can keep BH disabled for too long. I ran several benchmarks and got no significant difference in throughput, but a very significant reduction of latencies (one order of magnitude) : In following bench, 200 antagonist "netperf -t TCP_RR" are started in background, using all available cpus. Then we start one "netperf -t TCP_RR", bound to the cpu handling the NIC IRQ (hard+soft) Before patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=550110.424 MIN_LATENCY=146858 MAX_LATENCY=997109 P50_LATENCY=305000 P90_LATENCY=550000 P99_LATENCY=710000 MEAN_LATENCY=376989.12 STDDEV_LATENCY=184046.92 After patch : # netperf -H 7.7.7.84 -t TCP_RR -T2,2 -- -k RT_LATENCY,MIN_LATENCY,MAX_LATENCY,P50_LATENCY,P90_LATENCY,P99_LATENCY,MEAN_LATENCY,STDDEV_LATENCY MIGRATED TCP REQUEST/RESPONSE TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 7.7.7.84 () port 0 AF_INET : first burst 0 : cpu bind RT_LATENCY=40545.492 MIN_LATENCY=9834 MAX_LATENCY=78366 P50_LATENCY=33583 P90_LATENCY=59000 P99_LATENCY=69000 MEAN_LATENCY=38364.67 STDDEV_LATENCY=12865.26 Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: David Miller <davem@davemloft.net> Cc: Tom Herbert <therbert@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
One long standing problem with TSO/GSO/GRO packets is that skb->len doesn't represent a precise amount of bytes on wire. Headers are only accounted for the first segment. For TCP, thats typically 66 bytes per 1448 bytes segment missing, an error of 4.5 % for normal MSS value. As consequences : 1) TBF/CBQ/HTB/NETEM/... can send more bytes than the assigned limits. 2) Device stats are slightly under estimated as well. Fix this by taking account of headers in qdisc_skb_cb(skb)->pkt_len computation. Packet schedulers should use qdisc pkt_len instead of skb->len for their bandwidth limitations, and TSO enabled devices drivers could use pkt_len if their statistics are not hardware assisted, and if they don't scratch skb->cb[] first word. Both egress and ingress paths work, thanks to commit fda55eca (net: introduce skb_transport_header_was_set()) : If GRO built a GSO packet, it also set the transport header for us. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Paolo Valente <paolo.valente@unimore.it> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vijay Subramanian authored
Recent commit (commit 7e3a2dc5 doc: make the description of how tcp_ecn works more explicit and clear ) clarified the behavior of tcp_ecn sysctl variable but description is inconsistent. When requested by incoming conections, ECN is enabled with not just tcp_ecn = 2 but also with tcp_ecn = 1. This patch makes it clear that with tcp_ecn = 1, ECN is enabled when requested by incoming connections. Also fix spelling of 'incoming'. Signed-off-by: Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ariel Elior authored
Static checkers complained that the E1H_FUNC_MAX define is used incorrectly in bnx2x_pretend_func(). The complaint was justified, although its not a real bug, as the first part of the conditional protects us in this case (a real bug would happen if a VF tried to use the pretend func, but there are no VFs in E1H chips). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
In commit d0e2c55e (veth: avoid a NULL deref in veth_stats_one) we now clear the peer pointers in veth_dellink() veth_close() must therefore make sure the peer pointer is set. Reported-by: Tom Parkin <tom.parkin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
With Hard-Wired firmware configuration it was incorrectly provisioning the VFs Channel Access Rights Mask. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Barry Grussling authored
Fix DSA whitespace issues reported by checkpatch.pl Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Barry Grussling authored
Convert DSA printk calls to netdev_info calls as recommended by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Barry Grussling authored
Convert DSA msleep calls to timeout/usleep_range calls as reported by checkpatch.pl. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Barry Grussling authored
Convert DSA driver comments to network-style comments as reported by checkpatch.pl. Fix spelling error. Signed-off-by: Barry Grussling <barry@grussling.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Do not convert endian back and forth. If the caller uses contant "mask" argument (and most callers do), we can omit runtime endian conversion here. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
In ipv6_recv_error(), addr_offset points to daddr field of the ip header. To get ipv6 header, use container_of() macro instead of substracting magic number (24). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
"vfop" is NULL here. I've changed the debugging to not use it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ariel Elior <ariele@broadcom.com> Acked-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
BCMA is a Broadcom specific bus with devices AKA cores. All recent BCMA based SoCs have gigabit ethernet provided by the GBit MAC core. This patch adds driver for such a cores registering itself as a netdev. It has been tested on a BCM4706 and BCM4718 chipsets. In the kernel tree there is already b44 driver which has some common things with bgmac, however there are many differences that has led to the decision or writing a new driver: 1) GBit MAC cores appear on BCMA bus (not SSB as in case of b44) 2) There is 64bit DMA engine which differs from 32bit one 3) There is no CAM (Content Addressable Memory) in GBit MAC 4) We have 4 TX queues on GBit MAC devices (instead of 1) 5) Many registers have different addresses/values 6) RX header flags are also different The driver in it's state is functional how, however there is of course place for improvements: 1) Supporting more net_device_ops 2) SUpporting more ethtool_ops 3) Unaligned addressing in DMA 4) Writing separated PHY driver Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 09 Jan, 2013 2 commits
-
-
Jiri Pirko authored
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
Benefit from the fact that dev->addr_assign_type is set to NET_ADDR_PERM in case the device has permanent address. This also fixes the problem that many drivers do not set perm_addr at all. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
-