This patch avoids the warning that the pointer mbo might be used
uninitialized that some environmens throw.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is needed as function snd_card_new needs a valid
parent device. Passing a NULL pointer leads to kernel Ooops.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On arm64/aarch64 architectures the allocation of coherent memory needs a
device that has the dma_ops properly set. That's why the core module of
the MOST driver is no longer able to allocate this type or memory. This
patch moves the allocation process down to the interface drivers where
the proper devices exist (e.g. platform device or USB system software).
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, there are two module parameters for the i2c driver:
  - polling_req: boolean irq/polling mode;
  - scan_rate: polling rate, that is used in the case where the polling
    mode is active

This model is misconfiguration-prone.  For example, it is possible to
select polling mode with the zero polling rate or configure non-zero
polling rate in a combination with the IRQ mode.

This patch replaces the 'polling_req' and 'scan_rate' by the
'polling_rate', where the value zero means the interrupt driven mode and
other values are used as the polling rate in the polling mode.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The elements of the dev->rx.list are consumed in the pending_rx_work and
populated in the function enqueue() that cancels the pending_rx_work.

The function enqueue() and poison_channel() do not race anyway.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The variable is_open is checked only in the work function
pending_rx_work() that is only active between the calls
configure_channel() and poison_channel().
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The real polling rate depends on the CONFIG_HZ and may differ from the
required polling rate.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch avoids that a configured scan_rate of more than MSEC_PER_SEC
might result in a polling delay of zero.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch prevents the driver from falling back to polling mode
in case of IRQ misconfiguration.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes the function wait_event_interruptible from the
work function to avoid waiting.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently the IRQ handler used for the rx channel lives between the
functions i2c_probe and i2c_remove. This patch shortens the lifetime
and keeps the handler alive only between the functions configure_channel
and poison_channel.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, the only supported PCM formats are 1x8", "2x16", "2x24",
"2x32" or "6x16".

This adds support for the format "Nx{8,16,24,32}" that also includes the
exotic PCM formats like "4x16", "5x8", etc.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds the channel property dbr_size to control the corresponding
buffer size of the channels of the DIM2 interface.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes call of the poison_channel that is:
  - not allowed after most_deregister_interface;
  - is made during the most_deregister_interface call.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prevents division by zero scan_rate.

The zero scan_rate does not need any special action as it actually means
"never poll again".
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This removes the module parameter clock_speed from the HDM code.

Instead, the platform-dependent clock speed must be delivered by the
platform driver with the help of the dim2_platform_data.clk_speed.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This prohibits the allocation of the memory for the MBOs if only the
part of the MBOs, requested by the application, may be allocated.  The
function arm_mbo_chain, if cannot allocate all requested MBO, frees all
prior allocated memory and returns 0.
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes a checkpatch.pl warning.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

checkpatch.pl complains these are invalid because the rules in
Documentation/process/license-rules.rst state that C headers should
have "/* */" style comments.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch.pl warnings about lines ending with parentheses.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add the identifiers when missing and fix the ones already present
according to checkpatch.pl.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following checkpatch.pl warning:
"prefer 'help' over '---help---' for new help texts"
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

d_splice_alias() can return an ERR_PTR().
If it does while debugging is enabled, the following
CDEBUG() will dereference that error and crash.

So add appropriate checking, and provide a separate
debug message for the error case.
Reported-and-tested-by: James Simmons <jsimmons@infradead.org>
Fixes: e9d4f0b9 ("staging: lustre: llite: use d_splice_alias for directories.")
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no longer any need to keep this code separate,
and now we can remove linux-module.c
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The ioctl handler for the misc device is in  lnet/libcfs/module.c
but is it registered in lnet/libcfs/linux/linux-module.c.

Keeping related code together make maintenance easier, so move the
code.
Reviewed-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Both the 'next' and the 'show' functions for the dump_page_cache
seqfile perform a lookup based on the current file index.  This is
needless duplication.

The reason appears to be that the state that needs to be communicated
from "next" to "show" is two pointers, but seq_file only provides for
a single pointer to be returned from next and passed to show.

So make use of the new 'seq_private' structure to store the extra
pointer.
So when 'next' (or 'start') find something, it returns the page and
stores the clob in the private area.
'show' accepts the page as an argument, and finds the clob where it
was stored.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The dump_page_cache debugfs file allocates and frees an 'env' in each
call to vvp_pgcache_start,next,show.  This is likely to be fast, but
does introduce the need to check for errors.

It is reasonable to allocate a single 'env' when the file is opened,
and use that throughout.

So create 'seq_private' structure which stores the sbi, env, and
refcheck, and attach this to the seqfile.

Then use it throughout instead of allocating 'env' repeatedly.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_object_new() duplicates a lot of code that is in
lu_object_find_at().
There is no real need for a separate function, it is simpler just
to skip the bits of lu_object_find_at() that we don't
want in the LOC_F_NEW case.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The current retry logic, to wait when a 'dying' object is found,
spans multiple functions.  The process is attached to a waitqueue
and set TASK_UNINTERRUPTIBLE in htable_lookup, and this status
is passed back through lu_object_find_try() to lu_object_find_at()
where schedule() is called and the process is removed from the queue.

This can be simplified by moving all the logic (including
hashtable locking) inside htable_lookup(), which now never returns
EAGAIN.

Note that htable_lookup() is called with the hash bucket lock
held, and will drop and retake it if it needs to schedule.

I made this a 'goto' loop rather than a 'while(1)' loop as the
diff is easier to read.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

lu_object maintains 2 lru counts.
One is a per-bucket lsb_lru_len.
The other is the per-cpu ls_lru_len_counter.

The only times the per-bucket counters are use are:
- a debug message when an object is added
- in lu_site_stats_get when all the counters are combined.

The debug message is not essential, and the per-cpu counter
can be used to get the combined total.

So discard the per-bucket lsb_lru_len.
Reviewed-by: Andreas Dilger <andreas.dilger@dilger.ca>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This data structure only needs to be public so that
various modules can access a wait queue to wait for object
destruction.
If we provide a function to get the wait queue, rather than the
whole bucket, the structure can be made private.
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes the following W=1 warning: variable ‘intf_id’ set but
not used [-Wunused-but-set-variable]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This satisfies a checkpatch.pl warning and is the preferred method for
notating the license due to its lack of ambiguity.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This statment triggers GCC's -Wtype-limit since key_index is an
unsigned integer so it cannot be less than zero.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns that 'wid' is unused in wilc_remove_key and it's correct; the
variable is only local. Get rid of the function (since it just returns
zero) and shuffle the remaining code into one if statement.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

GCC warns these variables are all set but never used so remove them.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are multiple occurrances of typos of "offest" that should be
"offset". Fix these.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>