- 01 May, 2020 28 commits
-
-
Yoshiyuki Kurauchi authored
In drivers/net/gtp.c, gtp_genl_dump_pdp() should set NLM_F_MULTI flag since it returns multipart message. This patch adds a new arg "flags" in gtp_genl_fill_info() so that flags can be set by the callers. Signed-off-by:
Yoshiyuki Kurauchi <ahochauwaaaaa@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jules Irenge authored
Sparse reports a warning at service_ofldq() warning: context imbalance in service_ofldq() - unexpected unlock The root cause is the missing annotation at service_ofldq() Add the missing __must_hold(&q->sendq.lock) annotation Signed-off-by:
Jules Irenge <jbi.octave@gmail.com> Signed-off-by:
-
Jacob Keller authored
The documentation for the ice driver around "fw.app" has a spelling mistake in variation. Additionally, the language of "shall have a unique name" sounds like a requirement. Reword this to read more like a description or property. Reported-by:
Benjamin Fisher <benjamin.l.fisher@intel.com> Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Acked-by:
Jakub Kicinski <kubakici@wp.pl> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Clay McClure authored
Commit d1cbfd77 ("ptp_clock: Allow for it to be optional") changed all PTP-capable Ethernet drivers from `select PTP_1588_CLOCK` to `imply PTP_1588_CLOCK`, "in order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers." As a result it is possible to build PTP-capable Ethernet drivers without the PTP subsystem by deselecting PTP_1588_CLOCK. Drivers are required to handle the missing dependency gracefully. Some PTP-capable Ethernet drivers (e.g., TI_CPSW) factor their PTP code out into separate drivers (e.g., TI_CPTS_MOD). The above commit also changed these PTP-specific drivers to `imply PTP_1588_CLOCK`, making it possible to build them without the PTP subsystem. But as Grygorii Strashko noted in [1]: On Wed, Apr 22, 2020 at 02:16:11PM +0300, Grygorii Strashko wrote: > Another question is that CPTS completely nonfunctional in this case and > it was never expected that somebody will even try to use/run such > configuration (except for random build purposes). In my view, enabling a PTP-specific driver without the PTP subsystem is a configuration error made possible by the above commit. Kconfig should not allow users to create a configuration with missing dependencies that results in "completely nonfunctional" drivers. I audited all network drivers that call ptp_clock_register() but merely `imply PTP_1588_CLOCK` and found five PTP-specific drivers that are likely nonfunctional without PTP_1588_CLOCK: NET_DSA_MV88E6XXX_PTP NET_DSA_SJA1105_PTP MACB_USE_HWSTAMP CAVIUM_PTP TI_CPTS_MOD Note how these symbols all reference PTP or timestamping in their name; this is a clue that they depend on PTP_1588_CLOCK. Change them from `imply PTP_1588_CLOCK` [2] to `depends on PTP_1588_CLOCK`. I'm not using `select PTP_1588_CLOCK` here because PTP_1588_CLOCK has its own dependencies, which `select` would not transitively apply. Additionally, remove the `select NET_PTP_CLASSIFY` from CPTS_TI_MOD; PTP_1588_CLOCK already selects that. [1]: https://lore.kernel.org/lkml/c04458ed-29ee-1797-3a11-7f3f560553e6@ti.com/ [2]: NET_DSA_SJA1105_PTP had never declared any type of dependency on PTP_1588_CLOCK (`imply` or otherwise); adding a `depends on PTP_1588_CLOCK` here seems appropriate. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Nicolas Pitre <nico@fluxnic.net> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: d1cbfd77 ("ptp_clock: Allow for it to be optional") Signed-off-by:
Clay McClure <clay@daemons.net> Signed-off-by:
-
Jakub Kicinski authored
Commit d5b90e99 ("devlink: report 0 after hitting end in region read") fixed region dump, but region read still returns a spurious error: $ devlink region read netdevsim/netdevsim1/dummy snapshot 0 addr 0 len 128 0000000000000000 a6 f4 c4 1c 21 35 95 a6 9d 34 c3 5b 87 5b 35 79 0000000000000010 f3 a0 d7 ee 4f 2f 82 7f c6 dd c4 f6 a5 c3 1b ae 0000000000000020 a4 fd c8 62 07 59 48 03 70 3b c7 09 86 88 7f 68 0000000000000030 6f 45 5d 6d 7d 0e 16 38 a9 d0 7a 4b 1e 1e 2e a6 0000000000000040 e6 1d ae 06 d6 18 00 85 ca 62 e8 7e 11 7e f6 0f 0000000000000050 79 7e f7 0f f3 94 68 bd e6 40 22 85 b6 be 6f b1 0000000000000060 af db ef 5e 34 f0 98 4b 62 9a e3 1b 8b 93 fc 17 devlink answers: Invalid argument 0000000000000070 61 e8 11 11 66 10 a5 f7 b1 ea 8d 40 60 53 ed 12 This is a minimal fix, I'll follow up with a restructuring so we don't have two checks for the same condition. Fixes: fdd41ec2 ("devlink: Return right error code in case of errors for region read") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Nathan Chancellor authored
netvsc_start_xmit is used as a callback function for the ndo_start_xmit function pointer. ndo_start_xmit's return type is netdev_tx_t but netvsc_start_xmit's return type is int. This causes a failure with Control Flow Integrity (CFI), which requires function pointer prototypes and callback function definitions to match exactly. When CFI is in enforcing, the kernel panics. When booting a CFI kernel with WSL 2, the VM is immediately terminated because of this. The splat when CONFIG_CFI_PERMISSIVE is used: [ 5.916765] CFI failure (target: netvsc_start_xmit+0x0/0x10): [ 5.916771] WARNING: CPU: 8 PID: 0 at kernel/cfi.c:29 __cfi_check_fail+0x2e/0x40 [ 5.916772] Modules linked in: [ 5.916774] CPU: 8 PID: 0 Comm: swapper/8 Not tainted 5.7.0-rc3-next-20200424-microsoft-cbl-00001-ged4eb37d2c69-dirty #1 [ 5.916776] RIP: 0010:__cfi_check_fail+0x2e/0x40 [ 5.916777] Code: 48 c7 c7 70 98 63 a9 48 c7 c6 11 db 47 a9 e8 69 55 59 00 85 c0 75 02 5b c3 48 c7 c7 73 c6 43 a9 48 89 de 31 c0 e8 12 2d f0 ff <0f> 0b 5b c3 00 00 cc cc 00 00 cc cc 00 00 cc cc 00 00 85 f6 74 25 [ 5.916778] RSP: 0018:ffffa803c0260b78 EFLAGS: 00010246 [ 5.916779] RAX: 712a1af25779e900 RBX: ffffffffa8cf7950 RCX: ffffffffa962cf08 [ 5.916779] RDX: ffffffffa9c36b60 RSI: 0000000000000082 RDI: ffffffffa9c36b5c [ 5.916780] RBP: ffff8ffc4779c2c0 R08: 0000000000000001 R09: ffffffffa9c3c300 [ 5.916781] R10: 0000000000000151 R11: ffffffffa9c36b60 R12: ffff8ffe39084000 [ 5.916782] R13: ffffffffa8cf7950 R14: ffffffffa8d12cb0 R15: ffff8ffe39320140 [ 5.916784] FS: 0000000000000000(0000) GS:ffff8ffe3bc00000(0000) knlGS:0000000000000000 [ 5.916785] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.916786] CR2: 00007ffef5749408 CR3: 00000002f4f5e000 CR4: 0000000000340ea0 [ 5.916787] Call Trace: [ 5.916788] <IRQ> [ 5.916790] __cfi_check+0x3ab58/0x450e0 [ 5.916793] ? dev_hard_start_xmit+0x11f/0x160 [ 5.916795] ? sch_direct_xmit+0xf2/0x230 [ 5.916796] ? __dev_queue_xmit.llvm.11471227737707190958+0x69d/0x8e0 [ 5.916797] ? neigh_resolve_output+0xdf/0x220 [ 5.916799] ? neigh_connected_output.cfi_jt+0x8/0x8 [ 5.916801] ? ip6_finish_output2+0x398/0x4c0 [ 5.916803] ? nf_nat_ipv6_out+0x10/0xa0 [ 5.916804] ? nf_hook_slow+0x84/0x100 [ 5.916807] ? ip6_input_finish+0x8/0x8 [ 5.916807] ? ip6_output+0x6f/0x110 [ 5.916808] ? __ip6_local_out.cfi_jt+0x8/0x8 [ 5.916810] ? mld_sendpack+0x28e/0x330 [ 5.916811] ? ip_rt_bug+0x8/0x8 [ 5.916813] ? mld_ifc_timer_expire+0x2db/0x400 [ 5.916814] ? neigh_proxy_process+0x8/0x8 [ 5.916816] ? call_timer_fn+0x3d/0xd0 [ 5.916817] ? __run_timers+0x2a9/0x300 [ 5.916819] ? rcu_core_si+0x8/0x8 [ 5.916820] ? run_timer_softirq+0x14/0x30 [ 5.916821] ? __do_softirq+0x154/0x262 [ 5.916822] ? native_x2apic_icr_write+0x8/0x8 [ 5.916824] ? irq_exit+0xba/0xc0 [ 5.916825] ? hv_stimer0_vector_handler+0x99/0xe0 [ 5.916826] ? hv_stimer0_callback_vector+0xf/0x20 [ 5.916826] </IRQ> [ 5.916828] ? hv_stimer_global_cleanup.cfi_jt+0x8/0x8 [ 5.916829] ? raw_setsockopt+0x8/0x8 [ 5.916830] ? default_idle+0xe/0x10 [ 5.916832] ? do_idle.llvm.10446269078108580492+0xb7/0x130 [ 5.916833] ? raw_setsockopt+0x8/0x8 [ 5.916833] ? cpu_startup_entry+0x15/0x20 [ 5.916835] ? cpu_hotplug_enable.cfi_jt+0x8/0x8 [ 5.916836] ? start_secondary+0x188/0x190 [ 5.916837] ? secondary_startup_64+0xa5/0xb0 [ 5.916838] ---[ end trace f2683fa869597ba5 ]--- Avoid this by using the right return type for netvsc_start_xmit. Fixes: fceaf24a ("Staging: hv: add the Hyper-V virtual network driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1009Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
David S. Miller authored
Dan Murphy says: ==================== WoL fixes for DP83822 and DP83tc811 The WoL feature for each device was enabled during boot or when the PHY was brought up which may be undesired. These patches disable the WoL in the config_init. The disabling and enabling of the WoL is now done though the set_wol call. ==================== Signed-off-by: -
Dan Murphy authored
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 6d749428788b ("net: phy: DP83TC811: Introduce support for the DP83TC811 phy") Signed-off-by:Dan Murphy <dmurphy@ti.com> Signed-off-by:
-
Dan Murphy authored
The WoL feature should be disabled when config_init is called and the feature should turned on or off when set_wol is called. In addition updated the calls to modify the registers to use the set_bit and clear_bit function calls. Fixes: 3b427751a9d0 ("net: phy: DP83822 initial driver submission") Signed-off-by: -
David Ahern authored
Nik reported a bug with pcpu dst cache when nexthop objects are used illustrated by the following: $ ip netns add foo $ ip -netns foo li set lo up $ ip -netns foo addr add 2001:db8:11::1/128 dev lo $ ip netns exec foo sysctl net.ipv6.conf.all.forwarding=1 $ ip li add veth1 type veth peer name veth2 $ ip li set veth1 up $ ip addr add 2001:db8:10::1/64 dev veth1 $ ip li set dev veth2 netns foo $ ip -netns foo li set veth2 up $ ip -netns foo addr add 2001:db8:10::2/64 dev veth2 $ ip -6 nexthop add id 100 via 2001:db8:10::2 dev veth1 $ ip -6 route add 2001:db8:11::1/128 nhid 100 Create a pcpu entry on cpu 0: $ taskset -a -c 0 ip -6 route get 2001:db8:11::1 Re-add the route entry: $ ip -6 ro del 2001:db8:11::1 $ ip -6 route add 2001:db8:11::1/128 nhid 100 Route get on cpu 0 returns the stale pcpu: $ taskset -a -c 0 ip -6 route get 2001:db8:11::1 RTNETLINK answers: Network is unreachable While cpu 1 works: $ taskset -a -c 1 ip -6 route get 2001:db8:11::1 2001:db8:11::1 from :: via 2001:db8:10::2 dev veth1 src 2001:db8:10::1 metric 1024 pref medium Conversion of FIB entries to work with external nexthop objects missed an important difference between IPv4 and IPv6 - how dst entries are invalidated when the FIB changes. IPv4 has a per-network namespace generation id (rt_genid) that is bumped on changes to the FIB. Checking if a dst_entry is still valid means comparing rt_genid in the rtable to the current value of rt_genid for the namespace. IPv6 also has a per network namespace counter, fib6_sernum, but the count is saved per fib6_node. With the per-node counter only dst_entries based on fib entries under the node are invalidated when changes are made to the routes - limiting the scope of invalidations. IPv6 uses a reference in the rt6_info, 'from', to track the corresponding fib entry used to create the dst_entry. When validating a dst_entry, the 'from' is used to backtrack to the fib6_node and check the sernum of it to the cookie passed to the dst_check operation. With the inline format (nexthop definition inline with the fib6_info), dst_entries cached in the fib6_nh have a 1:1 correlation between fib entries, nexthop data and dst_entries. With external nexthops, IPv6 looks more like IPv4 which means multiple fib entries across disparate fib6_nodes can all reference the same fib6_nh. That means validation of dst_entries based on external nexthops needs to use the IPv4 format - the per-network namespace counter. Add sernum to rt6_info and set it when creating a pcpu dst entry. Update rt6_get_cookie to return sernum if it is set and update dst_check for IPv6 to look for sernum set and based the check on it if so. Finally, rt6_get_pcpu_route needs to validate the cached entry before returning a pcpu entry (similar to the rt_cache_valid calls in __mkroute_input and __mkroute_output for IPv4). This problem only affects routes using the new, external nexthops. Thanks to the kbuild test robot for catching the IS_ENABLED needed around rt_genid_ipv6 before I sent this out. Fixes: 5b98324e ("ipv6: Allow routes to use nexthop objects") Reported-by:Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Reviewed-by:
-
Rahul Lakkireddy authored
Under heavy load, the EOTID termination FLOWC request fails to get enqueued to the end of the Tx ring due to lack of credits. This results in EOTID leak. When disabling TC-MQPRIO offload, the link is already brought down to cleanup EOTIDs. So, flush any pending enqueued skbs that can't be sent outside the wire, to make room for FLOWC request. Also, move the FLOWC descriptor consumption logic closer to when the FLOWC request is actually posted to hardware. Fixes: 0e395b3c ("cxgb4: add FLOWC based QoS offload") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Andy Shevchenko authored
Unfortunately sometimes ->probe() may fail. The commit b9663b7c ("net: stmmac: Enable SERDES power up/down sequence") messed up with error handling and thus: [ 12.811311] ------------[ cut here ]------------ [ 12.811993] kernel BUG at net/core/dev.c:9937! Fix this by properly crafted error path. Fixes: b9663b7c ("net: stmmac: Enable SERDES power up/down sequence") Cc: Voon Weifeng <weifeng.voon@intel.com> Cc: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Jiri Pirko authored
Vregion helpers to get min and max priority depend on the correct ordering of vchunks in the vregion list. However, the current code always adds new chunk to the end of the list, no matter what the priority is. Fix this by finding the correct place in the list and put vchunk there. Fixes: 22a67766 ("mlxsw: spectrum: Introduce ACL core with simple TCAM implementation") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Toke Høiland-Jørgensen authored
RFC 6040 recommends propagating an ECT(1) mark from an outer tunnel header to the inner header if that inner header is already marked as ECT(0). When RFC 6040 decapsulation was implemented, this case of propagation was not added. This simply appears to be an oversight, so let's fix that. Fixes: eccc1bb8 ("tunnel: drop packet if ECN present with not-ECT") Reported-by:
Bob Briscoe <ietf@bobbriscoe.net> Reported-by:
Olivier Tilmans <olivier.tilmans@nokia-bell-labs.com> Cc: Dave Taht <dave.taht@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Andy Shevchenko authored
The commit e6a41c23, while trying to fix an issue, ("net: macb: ensure interface is not suspended on at91rm9200") introduced a refcounting regression, because in error case refcounter must be balanced. Fix it by calling pm_runtime_put_noidle() in error case. While here, fix the same mistake in other couple of places. Fixes: e6a41c23 ("net: macb: ensure interface is not suspended on at91rm9200") Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by:
-
Christophe JAILLET authored
Should an irq requested with 'devm_request_irq' be released explicitly, it should be done by 'devm_free_irq()', not 'free_irq()'. Fixes: 6c821bd9 ("net: Add MOXA ART SoCs ethernet driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Scott Dial authored
MACsec decryption always occurs in a softirq context. Since the FPU may not be usable in the softirq context, the call to decrypt may be scheduled on the cryptd work queue. The cryptd work queue does not provide ordering guarantees. Therefore, preserving order requires masking out ASYNC implementations of gcm(aes). For instance, an Intel CPU with AES-NI makes available the generic-gcm-aesni driver from the aesni_intel module to implement gcm(aes). However, this implementation requires the FPU, so it is not always available to use from a softirq context, and will fallback to the cryptd work queue, which does not preserve frame ordering. With this change, such a system would select gcm_base(ctr(aes-aesni),ghash-generic). While the aes-aesni implementation prefers to use the FPU, it will fallback to the aes-asm implementation if unavailable. By using a synchronous version of gcm(aes), the decryption will complete before returning from crypto_aead_decrypt(). Therefore, the macsec_decrypt_done() callback will be called before returning from macsec_decrypt(). Thus, the order of calls to macsec_post_decrypt() for the frames is preserved. While it's presumable that the pure AES-NI version of gcm(aes) is more performant, the hybrid solution is capable of gigabit speeds on modest hardware. Regardless, preserving the order of frames is paramount for many network protocols (e.g., triggering TCP retries). Within the MACsec driver itself, the replay protection is tripped by the out-of-order frames, and can cause frames to be dropped. This bug has been present in this code since it was added in v4.6, however it may not have been noticed since not all CPUs have FPU offload available. Additionally, the bug manifests as occasional out-of-order packets that are easily misattributed to other network phenomena. When this code was added in v4.6, the crypto/gcm.c code did not restrict selection of the ghash function based on the ASYNC flag. For instance, x86 CPUs with PCLMULQDQ would select the ghash-clmulni driver instead of ghash-generic, which submits to the cryptd work queue if the FPU is busy. However, this bug was was corrected in v4.8 by commit b30bdfa8, and was backported all the way back to the v3.14 stable branch, so this patch should be applicable back to the v4.6 stable branch. Signed-off-by:
Scott Dial <scott@scottdial.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Do not update the UDP checksum when it's zero, from Guillaume Nault. 2) Fix return of local variable in nf_osf, from Arnd Bergmann. ==================== Signed-off-by: -
David S. Miller authored
Alex Elder says: ==================== net: ipa: three bug fixes This series fixes three bugs in the Qualcomm IPA code. The third adds a missing error code initialization step. ==================== Signed-off-by: -
Alex Elder authored
Zero the result code stored in a field of the scratch 0 register before issuing a generic EE command. This just guarantees that the value we read later was actually written as a result of the command. Also add the definitions of two more possible result codes that can be returned when issuing flow control enable or disable commands: INCORRECT_CHANNEL_STATE: - channel must be in started state INCORRECT_DIRECTION - flow control is only valid for TX channels Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
An error message about limiting the number of TREs used prints the wrong value. Fix this bug. Signed-off-by:
-
Alex Elder authored
In ipa_endpoint_stop(), for TX endpoints we set the number of retries to 0. When we break out of the loop, retries being 0 means we return EIO rather than the value of ret (which should be 0). Fix this by using a non-zero retry count for both RX and TX channels, and just break out of the loop after calling gsi_channel_stop() for TX channels. This way only RX channels will retry, and the retry count will be non-zero at the end for TX channels (so the proper value gets returned). Signed-off-by:
-
David S. Miller authored
Shannon Nelson says: ==================== ionic: fw upgrade bug fixes These patches address issues found in additional internal fw-upgrade testing. v2: - replaced extra state flag with postponing first link check - added device reset patch ==================== Signed-off-by: -
Shannon Nelson authored
Doing a device reset addresses an obscure FW timing issue in the FW upgrade process. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
Make sure we can report the new FW version after a fw-upgrade has finished by re-reading the device's fw version information. Fixes: c672412f ("ionic: remove lifs on fw reset") Signed-off-by:
-
Shannon Nelson authored
Don't bother with the link check during probe, let the watchdog notice the first link-up. This allows probe to finish cleanly without any interruptions from over excited user programs opening the device as soon as it is registered. Fixes: c672412f ("ionic: remove lifs on fw reset") Signed-off-by:
-
Julia Lawall authored
In this code, it appears that phyter_clocks is a list head, based on the previous list_for_each, and that clock->list is intended to be a list element, given that it has just been initialized in dp83640_clock_init. Accordingly, switch the arguments to list_add_tail, which takes the list head as the second argument. Fixes: cb646e2b ("ptp: Added a clock driver for the National Semiconductor PHYTER.") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by:
-
Ido Schimmel authored
User space can request to delete a range of VLANs from a bridge slave in one netlink request. For each deleted VLAN the FDB needs to be traversed in order to flush all the affected entries. If a large range of VLANs is deleted and the number of FDB entries is large or the FDB lock is contented, it is possible for the kernel to loop through the deleted VLANs for a long time. In case preemption is disabled, this can result in a soft lockup. Fix this by adding a schedule point after each VLAN is deleted to yield the CPU, if needed. This is safe because the VLANs are traversed in process context. Fixes: bdced7ef ("bridge: support for multiple vlans and vlan ranges in setlink and dellink requests") Signed-off-by:
Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Tested-by:
-
- 30 Apr, 2020 12 commits
-
-
Juliet Kim authored
During MTU change, the following events may happen. Client-driven CRQ initialization fails due to partner’s CRQ closed, causing client to enqueue a reset task for FATAL_ERROR. Then passive (server-driven) CRQ initialization succeeds, causing client to release CRQ and enqueue a reset task for failover. If the passive CRQ initialization occurs before the FATAL reset task is processed, the FATAL error reset task would try to access a CRQ message queue that was freed, causing an oops. The problem may be most likely to occur during DLPAR add vNIC with a non-default MTU, because the DLPAR process will automatically issue a change MTU request. Fix this by not processing fatal error reset if CRQ is passively initialized after client-driven CRQ initialization fails. Signed-off-by:
Juliet Kim <julietk@linux.vnet.ibm.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2020-04-29 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. v2: - Dropped the ktls patch, Tariq has to check if it is fixable in the stack For -stable v4.12 ('net/mlx5: Fix forced completion access non initialized command entry') ('net/mlx5: Fix command entry leak in Internal Error State') For -stable v5.4 ('net/mlx5: DR, On creation set CQ's arm_db member to right value') For -stable v5.6 ('net/mlx5e: Fix q counters on uplink representors') ==================== Signed-off-by: -
Paolo Abeni authored
tcp_v{4,6}_syn_recv_sock() set 'own_req' only when returning a not NULL 'child', let's check 'own_req' only if child is available to avoid an - unharmful - UBSAN splat. v1 -> v2: - reference the correct hash Fixes: 4c8941de ("mptcp: avoid flipping mp_capable field in syn_recv_sock()") Signed-off-by:Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
David S. Miller authored
Paolo Abeni says: ==================== mptcp: fix incoming options parsing This series addresses a serious issue in MPTCP option parsing. This is bigger than the usual -net change, but I was unable to find a working, sane, smaller fix. The core change is inside patch 2/5 which moved MPTCP options parsing from the TCP code inside existing MPTCP hooks and clean MPTCP options status on each processed packet. The patch 1/5 is a needed pre-requisite, and patches 3,4,5 are smaller, related fixes. v1 -> v2: - cleaned-up patch 1/5 - rebased on top of current -net ==================== Signed-off-by: -
Paolo Abeni authored
When parsing MPC+data packets we set the dss field, so we must also initialize the data_fin, or we can find stray value there. Fixes: 9a19371b ("mptcp: fix data_fin handing in RX path") Signed-off-by:
-
Paolo Abeni authored
The mentioned RX option field is initialized only for DSS packet, we must access it only if 'dss' is set too, or the subflow will end-up in a bad status, leading to RFC violations. Fixes: d22f4988 ("mptcp: process MP_CAPABLE data option") Signed-off-by:
-
Paolo Abeni authored
Syzcaller has found a way to trigger the WARN_ON_ONCE condition in check_fully_established(). The root cause is a legit fallback to TCP scenario, so replace the WARN with a plain message on a more strict condition. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
-
Paolo Abeni authored
The mptcp_options_received structure carries several per packet flags (mp_capable, mp_join, etc.). Such fields must be cleared on each packet, even on dropped ones or packet not carrying any MPTCP options, but the current mptcp code clears them only on TCP option reset. On several races/corner cases we end-up with stray bits in incoming options, leading to WARN_ON splats. e.g.: [ 171.164906] Bad mapping: ssn=32714 map_seq=1 map_data_len=32713 [ 171.165006] WARNING: CPU: 1 PID: 5026 at net/mptcp/subflow.c:533 warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.167632] Modules linked in: ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel geneve ip6_udp_tunnel udp_tunnel macsec macvtap tap ipvlan macvlan 8021q garp mrp xfrm_interface veth netdevsim nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun binfmt_misc intel_rapl_msr intel_rapl_common rfkill kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel joydev virtio_balloon pcspkr i2c_piix4 sunrpc ip_tables xfs libcrc32c crc32c_intel serio_raw virtio_console ata_generic virtio_blk virtio_net net_failover failover ata_piix libata [ 171.199464] CPU: 1 PID: 5026 Comm: repro Not tainted 5.7.0-rc1.mptcp_f227fdf5d388+ #95 [ 171.200886] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 171.202546] RIP: 0010:warn_bad_map (linux-mptcp/net/mptcp/subflow.c:533 linux-mptcp/net/mptcp/subflow.c:531) [ 171.206537] Code: c1 ea 03 0f b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 04 84 d2 75 1d 8b 55 3c 44 89 e6 48 c7 c7 20 51 13 95 e8 37 8b 22 fe <0f> 0b 48 83 c4 08 5b 5d 41 5c c3 89 4c 24 04 e8 db d6 94 fe 8b 4c [ 171.220473] RSP: 0018:ffffc90000150560 EFLAGS: 00010282 [ 171.221639] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 171.223108] RDX: 0000000000000000 RSI: 0000000000000008 RDI: fffff5200002a09e [ 171.224388] RBP: ffff8880aa6e3c00 R08: 0000000000000001 R09: fffffbfff2ec9955 [ 171.225706] R10: ffffffff9764caa7 R11: fffffbfff2ec9954 R12: 0000000000007fca [ 171.227211] R13: ffff8881066f4a7f R14: ffff8880aa6e3c00 R15: 0000000000000020 [ 171.228460] FS: 00007f8623719740(0000) GS:ffff88810be00000(0000) knlGS:0000000000000000 [ 171.230065] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 171.231303] CR2: 00007ffdab190a50 CR3: 00000001038ea006 CR4: 0000000000160ee0 [ 171.232586] Call Trace: [ 171.233109] <IRQ> [ 171.233531] get_mapping_status (linux-mptcp/net/mptcp/subflow.c:691) [ 171.234371] mptcp_subflow_data_available (linux-mptcp/net/mptcp/subflow.c:736 linux-mptcp/net/mptcp/subflow.c:832) [ 171.238181] subflow_state_change (linux-mptcp/net/mptcp/subflow.c:1085 (discriminator 1)) [ 171.239066] tcp_fin (linux-mptcp/net/ipv4/tcp_input.c:4217) [ 171.240123] tcp_data_queue (linux-mptcp/./include/linux/compiler.h:199 linux-mptcp/net/ipv4/tcp_input.c:4822) [ 171.245083] tcp_rcv_established (linux-mptcp/./include/linux/skbuff.h:1785 linux-mptcp/./include/net/tcp.h:1774 linux-mptcp/./include/net/tcp.h:1847 linux-mptcp/net/ipv4/tcp_input.c:5238 linux-mptcp/net/ipv4/tcp_input.c:5730) [ 171.254089] tcp_v4_rcv (linux-mptcp/./include/linux/spinlock.h:393 linux-mptcp/net/ipv4/tcp_ipv4.c:2009) [ 171.258969] ip_protocol_deliver_rcu (linux-mptcp/net/ipv4/ip_input.c:204 (discriminator 1)) [ 171.260214] ip_local_deliver_finish (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/ipv4/ip_input.c:232) [ 171.261389] ip_local_deliver (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:252) [ 171.265884] ip_rcv (linux-mptcp/./include/linux/netfilter.h:307 linux-mptcp/./include/linux/netfilter.h:301 linux-mptcp/net/ipv4/ip_input.c:539) [ 171.273666] process_backlog (linux-mptcp/./include/linux/rcupdate.h:651 linux-mptcp/net/core/dev.c:6135) [ 171.275328] net_rx_action (linux-mptcp/net/core/dev.c:6572 linux-mptcp/net/core/dev.c:6640) [ 171.280472] __do_softirq (linux-mptcp/./arch/x86/include/asm/jump_label.h:25 linux-mptcp/./include/linux/jump_label.h:200 linux-mptcp/./include/trace/events/irq.h:142 linux-mptcp/kernel/softirq.c:293) [ 171.281379] do_softirq_own_stack (linux-mptcp/arch/x86/entry/entry_64.S:1083) [ 171.282358] </IRQ> We could address the issue clearing explicitly the relevant fields in several places - tcp_parse_option, tcp_fast_parse_options, possibly others. Instead we move the MPTCP option parsing into the already existing mptcp ingress hook, so that we need to clear the fields in a single place. This allows us dropping an MPTCP hook from the TCP code and removing the quite large mptcp_options_received from the tcp_sock struct. On the flip side, the MPTCP sockets will traverse the option space twice (in tcp_parse_option() and in mptcp_incoming_options(). That looks acceptable: we already do that for syn and 3rd ack packets, plain TCP socket will benefit from it, and even MPTCP sockets will experience better code locality, reducing the jumps between TCP and MPTCP code. v1 -> v2: - rebased on current '-net' tree Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Signed-off-by:
-
Paolo Abeni authored
Currently the MPTCP code uses 2 hooks to process syn-ack packets, mptcp_rcv_synsent() and the sk_rx_dst_set() callback. We can drop the first, moving the relevant code into the latter, reducing the hooking into the TCP code. This is also needed by the next patch. v1 -> v2: - use local tcp sock ptr instead of casting the sk variable several times - DaveM Signed-off-by:
-
Roi Dayan authored
Need to allocate the q counters before init_rx which needs them when creating the rq. Fixes: 8520fa57 ("net/mlx5e: Create q counters on uplink representors") Signed-off-by:
Roi Dayan <roid@mellanox.com> Reviewed-by:
Vlad Buslov <vladbu@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com>
-
Moshe Shemesh authored
Processing commands by cmd_work_handler() while already in Internal Error State will result in entry leak, since the handler process force completion without doorbell. Forced completion doesn't release the entry and event completion will never arrive, so entry should be released. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
mlx5_cmd_flush() will trigger forced completions to all valid command entries. Triggered by an asynch event such as fast teardown it can happen at any stage of the command, including command initialization. It will trigger forced completion and that can lead to completion on an uninitialized command entry. Setting MLX5_CMD_ENT_STATE_PENDING_COMP only after command entry is initialized will ensure force completion is treated only if command entry is initialized. Fixes: 73dd3a48 ("net/mlx5: Avoid using pending command interface slots") Signed-off-by:
-
