- 16 Oct, 2007 40 commits
-
-
Krzysztof Helt authored
This patch replaces <asm/uaccess.h> with <linux/uaccess.h> after the checkpatch.pl hint. The include of <asm/uaccess.h> is removed if the driver does not use it. Signed-off-by:
Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by:
Antonino Daplas <adaplas@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Ralf Baechle authored
<linux/selection.h> assumes that struct tty_struct has previously been included. If not, this pile of warnings will result: CC [M] drivers/video/console/newport_con.o In file included from drivers/video/console/newport_con.c:18: include/linux/selection.h:16: warning: 'struct tty_struct' declared inside param eter list include/linux/selection.h:16: warning: its scope is only this definition or decl aration, which is probably not what you want include/linux/selection.h:17: warning: 'struct tty_struct' declared inside param eter list include/linux/selection.h:20: warning: 'struct tty_struct' declared inside param eter list Fixed by adding a forward declaration of struct tty_struct. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Ralf Baechle authored
Akpm's patch "newport_con warning fix" got me to look at the console drivers again and one thing that I noticed was that none of the fonts was using ISO initializers for it's fonts. Signed-off-by:
-
Geert Uytterhoeven authored
atyfb: Move the pseudo palette into the card-specific atyfb_par, so it's no longer shared among multiple cards Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Krzysztof Helt authored
This patch sets correct bits related to the byte ordering of the framebuffer. This was tested on little endian kernel only. The big endian kernel may require different settings. The patch also adds 32 bpp mode which is called 24 bpp by Samsung. One pixel takes 32 bits but only 24 bits are used in this mode. Signed-off-by:
-
Krzysztof Helt authored
This patch adds missing virtual register offsets where appropriate. This fixes crashes in the driver. Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused lcdcon2 and lcdcon3 register value from the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds synchronization pulse lenght fields to the s3c2410fb_display structure and makes use of them in the driver. Signed-off-by:
-
Krzysztof Helt authored
This patch makes use of vertical margins fields in the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds vertical margins values to all s3c24xx platform. Signed-off-by:
-
Krzysztof Helt authored
This patch removes unused lcdcon3 register from the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch makes use of margins fields in the s3c2410fb_display structure. Signed-off-by:
-
Krzysztof Helt authored
This patch adds margins fields to the s3c2410fb_display structure. It also sets display type and horizontal margins in all platform files that use the s3c2410fb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch adds a new structure to describe and handle more than one panel (display mode) for the s3c2410 framebuffer. This structure is added after the pxafb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch removes redundant fb field from the s3c2410fb_info structure. This breaks circular reference fb_info -> s3c2410fb_info -> fb_info again. Signed-off-by:
-
Krzysztof Helt authored
This patch cleans up the driver a bit. It contains coding style fixes (pointed by Lindent and checkpatch), white space clean ups and few minor code improvements. Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support to the pm3fb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support for Permedia 2V chips. The hardware cursor is disabled by default. It does not blink - the same issue is mentioned in the x11 driver. Signed-off-by:
-
Geert Uytterhoeven authored
Looking at the code flow, `int first' in fb_create_modedb() should be static. [adaplas] Better for 'int first' to be moved outside the loop. [akpm@linux-foundation.org: kill stray semicolon] Signed-off-by:
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by:
-
Eugene Teo authored
drivers/video/geode/lxfb_core.c: In function 'lxfb_setup': drivers/video/geode/lxfb_core.c:564: warning: unused variable 'opt' Signed-off-by:
Eugene Teo <eugeneteo@kernel.sg> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm3fb.c file. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes all errors detected by checkpatch.pl script in the pm2fb.c file. Signed-off-by:
-
Krzysztof Helt authored
This patch adds mtrr support to the tdfxfb driver. It also kills one redundant include and initialization value. [akpm@linux-foundation.org: cleanups] Signed-off-by:
-
Krzysztof Helt authored
This patch adds hardware cursor support to the tdfxfb driver. Signed-off-by:
-
Krzysztof Helt authored
This patch improves source code mainly by killing redundant variable loads, reducing number of variables, simplifying conditional branches, etc. Signed-off-by:
-
Antonino A. Daplas authored
Reported by: John Lumby <johnlumby@hotmail.com> Some of the entries in the mode database does not match the comments and/or the refresh field. Adjust the timings so they match with both the comments and the refresh rate. Signed-off-by:
-
Adrian Bunk authored
The logo code is not and should not be used by modules. Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Adrian Bunk authored
radeon_driver_vblank_do_wait() can become static. Signed-off-by:
-
Krzysztof Helt authored
This patch fixes: - palette setting in 8-bit mode (aka 'funky penguin') - grayscale handling - adds proper barriers in xxx_inb/outb functions Signed-off-by:
-
Krzysztof Helt authored
This patch fixes 3 issues: - transparency handling in tdfxfb - panning with more than 4096 virtual height and acceleration (acceleration with x & y > 4096) - exit paths on errors in tdfxfb_probe() Additionally it sets a FBINFO_READS_FAST flag to use smart blitter scrolling (speed up on tdfxfb). Signed-off-by:
-
Krzysztof Helt authored
This patch contains coding style improvements to the tdfxfb driver (white spaces, indentations, long lines). It also moves fb_ops structure to the end of file, so forward declarations of ops functions are redundant. Signed-off-by:
-
Krzysztof Helt authored
This patch contains coding style improvements to the tridentfb driver (white spaces, indentations, long lines). It also moves fb_ops structure after fb api functions are defined. Signed-off-by:
-
Hans J. Koch authored
This patch adds support for the other three palette formats possible with the PXA LCD controller. This is required on boards where an LCD is connected with all its 18 bits. With this patch, it's possible to use an 8-bit mode with 18-bit palette entries. This used to be possible in 2.4 kernels but disappeared in 2.6. With current kernels, you can only get wrong colours out of an LCD connected this way. Users can choose the palette format by doing something like this in their board definition: static struct pxafb_mach_info my_fb_info = { [...] .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3, .lccr4 = LCCR4_PAL_FOR_2, [...] }; Signed-off-by:Hans J. Koch <hjk@linutronix.de> Signed-off-by:
-
Raphael Assenat authored
This contains the following changes: * Overlay surface alpha is configured separately from the overlay. This prevents display glitches (configure and fill the overlay first, set alpha to a visible value next) * Added an ioctl for configuring transparency of the Overlay and graphics planes. Blend mode, colorkey mode and global alpha mode are supported. * Added an ioctl for setting the plane order. The overlay plance can be placed over or under the graphics plane. * Added an ioctl for setting and reading chip registers, with mask. * Updated copyright for 2007 [adaplas] * Coding style changes Signed-off-by:
Raphael Assenat <raph@8d.com> Signed-off-by:
-
Ben Dooks authored
When we setup the panel interface whilst configuring the framebuffer, we should ensure the panel interface is not in tristate, in case the bootloader or previous setup has not enabled it. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Ben Dooks authored
Call the fb_set_suspend() over suspend and resume. Signed-off-by:
-
Ben Dooks authored
The suspend and resume code is failing to restore the CRT control register, thus causing the CRT data-path to get changed if the SM501 experiences a reset over suspend. Also move some of the debug messages to dev_dbg() level and ensure that the suspend code does not try and restore anything it did not manage to save. Signed-off-by:
-
Krzysztof Helt authored
This patch adds accelerated fillrect for 24-bit depth. Signed-off-by:
-
Krzysztof Helt authored
This patch: - initializes correctly the Permedia2V chip if it is not initialized by BIOS - puts back clock frequency for the ELSA WINNER board to 100kHz - fixes returned error values from setcolreg() function - uses more general classes for PCI ids Signed-off-by:
-
Krzysztof Helt authored
This patch concentrates on source compacting, simplification and more conformance to kernel coding standards. The major changes: - RD32() and WR() functions are merged into pm2_RD() and pm2_WR() - conditional (with switch()) RDAC functions are separated in two unconditional ones - the conditional pm2fb_block_op() function is merged into pm2fb_fillrect() and pm2fb_copyarea() - WAIT_FIFO() values are corrected Signed-off-by:
-
