- 13 Sep, 2005 40 commits
-
-
Neil Brown authored
Demote some printk's that look like they could be triggered by non-buggy clients to dprintk's. (For example, stale clientid's are normal occurrences on reboot, and on a server with a lot of clients these messages could become annoying.) Also remove some redundant dprintk's (e.g. no need for both STALE_CLIENTID and its callers to do dprintks). Signed-off-by:
J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Richard Purdie authored
Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz, Akita, Borzoi). Its based on corgikbd but there are enough subtle differences to justify a separate driver. Signed-Off-by:
Richard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Richard Purdie authored
Add the platform support code for two new Sharp Zaurus Models, Spitz (SL-C3000) and Borzoi (SL-C3100). This patch also adds most of the foundations for Akita (SL-C1000) Support. The missing link for Akita is the driver for its I2C io expander. Once this has been finished, the missing Kconfig option and machine declaration can easily be added to this code. Signed-Off-by:
-
Richard Purdie authored
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi backlight driver. Abstract model/machine specific functions to corgi_lcd.c via sharpsl.h This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Richard Purdie authored
Separate out the Sharp Zaurus c7x0 series specific code from the Corgi Touchscreen driver. Use the new functions in corgi_lcd.c via sharpsl.h for hsync handling and pass the IRQ as a platform device resource. Move a function prototype into the w100fb header file where it belongs. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Richard Purdie authored
The same LCD is present on both the Sharp Zaurus c7x0 series and the cxx00 but with different framebuffer drivers (w100fb vs. pxafb). This patch adds support for the cxx00 series to the LCD driver. It also adds some LCD to touchscreen interface logic needed by the touchscreen driver to prevent interference problems, the idea being to keep all the ugly code in one place leaving the drivers themselves clean. sharpsl.h is used to provide the abstraction. Signed-Off-by:
-
Richard Purdie authored
Sharp's newer range of Zaurus clamshell handhelds, the cxx00's are similar to the c7x0 series yet different. This patch series abstracts the differences and generates a set of common drivers that support both series of devices. It then adds machine support for Spitz (SL-C3000) and Borzoi (SL-C3100). Hooks for Akita (SL-C1000) differences are also added. The I2C driver for its IO expander is the only missing piece. This patch: Separate out the Sharp Zaurus c7x0 series specific code from corgi_ssp.c so that other models such as the cxx00's can share it. Create sharpsl.h which will be used to abstract machine/model specifics. This enables the driver to be used by the Zaurus cxx00 series. Signed-Off-by:
-
Peter Osterlund authored
Remove some redundant BUG_ON() statements in pktcdvd and move one run-time check to compile-time. Signed-off-by:
Peter Osterlund <petero2@telia.com> Signed-off-by:
-
Peter Osterlund authored
Use kcalloc and kzalloc in pktcdvd. Signed-off-by:
-
Peter Osterlund authored
In the /proc statistics, only count writes that upper layers have requested. Don't count additional writes created inside the packet driver to satisfy the requirement to only write full packets. Signed-off-by:
-
Peter Osterlund authored
Update the "theory of operation" description. Signed-off-by:
-
Peter Osterlund authored
In the packet writing driver, if the drive reports a packet size larger than the driver can handle, bail out safely instead of triggering a BUG_ON. Signed-off-by:
-
Mike Miller authored
Add SCSI host and device info not elsewhere available to /proc/scsi/cciss/* Namely, connect cciss device instance with scsi host number, and give scsi host number, bus, target, lun, devicetype, and 8-byte cciss LUNID for each tapedrive/medium changer attached to a controller For instance: # cat /proc/scsi/cciss/2 cciss0: SCSI host: 2 c2b0t0l0 01 0x0000000000000001 Signed-off-by:
Stephen M. Cameron <steve.cameron@hp.com> Signed-off-by:
Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Mike Miller authored
This patch adds support for "One Button Disaster Recovery" devices to the cciss driver. (OBDR devices are tape drives which can pretend to be cd-rom devices temporarily. Once booted the device can be reverted to a tape drive and data recovery operations can be automatically begun.) This is an enhancement request by a vendor/partner working on One Button Disaster Recovery. Signed-off-by:
-
Mike Miller authored
The CCISS driver seems to loose track of DMA mappings created by it's fill_cmd() routine. Neither callers of this routine are extracting the DMA address created in order to do the unmap. Instead, they simply try to unmap 0x0. It's easy to see this problem on an x86_64 system when using the "swiotlb=force" boot option. In this case, the driver is leaking resources of the swiotlb and not causing a sync of the bounce buffer. Signed-off-by:
Alex Williamson <alex.williamson@hp.com> Signed-off-by:
-
Mike Miller authored
This patch fixes a bug in cciss_remove_one. A set of braces was missing for the if statement causing an Oops on driver unload. Signed-off-by:
-
Mike Miller authored
This patch changes the way we complete commands. In the old method when we got a completion we searched our command list from the top until we find it. This method uses a tag associated with each command (not SCSI command tagging) to index us directly to the completed command. This helps performance. Signed-off-by:
Don Brace <dab@hp.com> Signed-off-by:
-
Mike Miller authored
This patch removes a couple of functions dealing with configuration and replaces them with new functions. This implementation fixes some bugs associated with the ACUXE. It also allows a logical volume to be removed from the middle without deleting all volumes behind it. If a user has 5 logical volumes and decides he wants to reconfigure volume number 3, he can now do that without removing volumes 4 & 5 first. This code has been tested in our labs against all application software. Signed-off-by:
Chase Maupin <chase.maupin@hp.com> Signed-off-by:
-
Mike Miller authored
This patch adds a flag called busy_initializing. If there are multiple controllers in a server AND the HP agents are running it's possible the agents may try to poll a card that is still initializing if the driver is removed and then added again. Signed-off-by:
-
Mike Miller authored
This patch adds new PCI and subsystem ID's that finally made the spec. It also include a name change for one controller. I know there's a lot of duplicat names but the fw folks wanted this for the different implementations. Even though the same ASIC is used it may be embedded on some platforms, standup card in others, and a mezzanine in other servers. Signed-off-by:
-
Michal Piotrowski authored
We seem to use both asm-offsets.* and asm_offsets.* Signed-off-by:
Michal K. K. Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by:
-
Chris Mason authored
reiserfs should use mark_inode_dirty during reiserfs_file_write and reiserfs_commit_write. This makes sure the inode is properly flagged as dirty, which is used during O_SYNC to decide when to trigger log commits. This patch also removes the O_SYNC check from reiserfs_commit_write, since that gets dealt with properly at higher layers once we start using mark_inode_dirty. Thanks to Hifumi Hisashi <hifumi.hisashi@lab.ntt.co.jp> for catching this. Signed-off-by:
-
Randy Dunlap authored
Use the add_taint() interface for setting tainted bit flags instead of doing it manually. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
Peter Osterlund authored
Remove check_region references from comments and printk statements so that searching for real users of this deprecated function gets easier. Signed-off-by:
-
Andrew Morton authored
These functions don't need schedule_timeout()'s barrier. Signed-off-by:
-
Andrew Morton authored
Explain the mysteries of set_current_state(). Quoth Linus: The scheduler itself never needs the memory barrier at all. The barrier is needed only if the user itself ends up testing some other thing afterwards, ie if you have set_process_state(TASK_INTERRUPTIBLE); if (still_need_to_sleep()) schedule(); then the "still_need_to_sleep()" thing may test flags and wakeup events, and then you _may_ want to (and often do) make sure that the write of TASK_INTERRUPTIBLE is serialized wrt the reads of any wakeup data (since the wakeup may have happened on another CPU). So the comment is somewhat wrong. We don't really _care_ whether the state propagates out to other CPU's since all of our actions are purely local, and there is nothing we do that is conditional on any other CPU: we're going to sleep unconditionally, and the scheduler only cares about _our_ state, not about somebody elses state. Signed-off-by:
-
Andi Kleen authored
Force a compiler error instead of a link error, because they are easier to track down. Idea stolen from code by Jan Beulich <jbeulich@novell.com> If the argument to BUILD_BUG_ON evaluates to non-zero the compiler will do: t.c:6: error: size of array `type name' is negative (surprised that gcc doesn't have an extension for this) Signed-off-by:
"Andi Kleen" <ak@suse.de> Signed-off-by:
-
Jan Beulich authored
Besides freeing initrd memory, also clear out the now dangling pointers to it, to make sure accidental late use attempts can be detected. Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Peter Staubach authored
When open(O_CREAT) is called and the error, ENFILE, is returned, the file may be created anyway. This is counter intuitive, against the SUS V3 specification, and may cause applications to misbehave if they are not coded correctly to handle this semantic. The SUS V3 specification explicitly states "No files shall be created or modified if the function returns -1.". The error, ENFILE, is used to indicate the system wide open file table is full and no more file structs can be allocated. This is due to an ordering problem. The entry in the directory is created before the file struct is allocated. If the allocation for the file struct fails, then the system call must return an error, but the directory entry was already created and can not be safely removed. The solution to this situation is relatively easy. The file struct should be allocated before the directory entry is created. If the allocation fails, then the error can be returned directly. If the creation of the directory entry fails, then the file struct can be easily freed. Signed-off-by:
Peter Staubach <staubach@redhat.com> Signed-off-by:
-
Kumar Gala authored
Removed ppc32 architecture specific users of asm/segment.h and asm-ppc/segment.h itself Signed-off-by:
Kumar Gala <kumar.gala@freescale.com> Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Tom Rini authored
Discard *.exit.text sections on runtime. We cannot do this on link time because of the way BUG macros are implemented. If "__exit function" calls one of those macros, __bug_table section will reference this function. This is similar to ".altinstructions" situation on i386. *.exit.data seems to be OK in this respect and is discarded on link time. Signed-off-by:
Eugene Surovegin <ebs@ebshome.net> Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Acked-by:
-
Andi Kleen authored
There was a pretty bad bug in there that the code would always check the full VMA, not the range the user requested. When the VMA to be checked was merged with the previous VMA this could lead to spurious failures. Signed-off-by:
-
Con Kolivas authored
Use the pgdat pointer we've already defined in wakeup_kswapd Signed-off-by:
Con Kolivas <kernel@kolivas.org> Signed-off-by:
-
Andrew Morton authored
Unused variable. Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Komuro authored
Add new id to orinoco_cs (corega PCCB-11). Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by:
Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by:
-
Alan Cox authored
Replace the foot long pile of festering garbage in eighty_ninty_three with some actual clean code. All the ifdefs are fixed and havent changed since 2.4 Acked-by:
Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Signed-off-by:
-
Dominik Brodowski authored
More visible user information of scheduled feature removal. Signed-off-by:
-
Antonino A. Daplas authored
Fix compile error if CONFIG_FB_I810_I2C is 'y' and CONFIG_I2C = 'm'. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Jiri Slaby authored
Fixes a bunch of memset bugs too. Signed-off-by:
Lion Vollnhals <webmaster@schiggl.de> Signed-off-by:
Jiri Slaby <xslaby@fi.muni.cz> Cc: Greg KH <greg@kroah.com> Signed-off-by:
-
Linus Torvalds authored
It's a dword thing, and the value we write is a dword. Doing a byte write to it is nonsensical, and writes only the low byte, which only contains the enable bit. So we enable a nonsensical address (usually zero), which causes the controller no end of problems. Trivial fix, but nasty to find. Signed-off-by:
-
