- 20 Mar, 2012 22 commits
-
-
Corentin Chary authored
The wireless status get and get commands seems to use one byte per device. First byte is for wlan and third is for bluetooh, we will have to find what the other are for. Signed-off-by:
Corentin Chary <corentincj@iksaif.net> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Matthew Garrett <mjg@redhat.com>
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
Signed-off-by:
-
Corentin Chary authored
We can now do the self test using debugfs, so remove the code and keep the debug flag to enable more traces. Signed-off-by:
-
Corentin Chary authored
This allow to call arbitrary sabi commands wihout modifying the driver at all. For example, setting the keyboard backlight brightness to 5 using debugfs interface can be done like that: ; Set the command echo 0x78 > command ; Set the data echo 0x0582 > d0 ; Fill the rest with 0 echo 0 > d1 echo 0 > d2 echo 0 > d3 ; And issue the command cat call Signed-off-by:
-
Corentin Chary authored
* SABI command are on 16 bits, not 8 * SABI can read/write up to 11 byte of data * There is not real difference between "get" and "set" commands, so refactorise the code of both functions Signed-off-by:
-
Corentin Chary authored
Will be usefull later when we will have more platform sysfs files like battery_life_extender or usb_charge. Signed-off-by:
-
Corentin Chary authored
samsung-laptop is not at all related to ACPI, but since this interface is not documented at all, and the driver has to use it at load to understand how it works on the laptop, I think it's a good idea to disable it if a better solution is available. Signed-off-by:
-
Corentin Chary authored
Create _init()/_exit() function for each subsystem, remove the local struct samsung_laptop * and only keep a struct platform_device * that can only be used in samsung_init() and samsung_exit(). Signed-off-by:
-
Corentin Chary authored
Even if this driver can only be loaded once, it is still a good idea to create some kind of context structure. Signed-off-by:
-
Axel Lin authored
This patch converts the drivers in drivers/platform/x86/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Hong Liu <hong.liu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Borislav Petkov authored
Turn off the following triggered with gcc 4.6.1 on Debian testing: drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’: drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’: drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] Cc: Frank Seidel <frank@f-seidel.de> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
-
AceLan Kao authored
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks, so that they could have touchpad LED function work. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
John Hughes authored
Fix scancodes returned by driver to match scancodes used to remap keys. (Before the patch FN/E returned scancode 0x1B, but to remap scancode 0x14 had to be used). The scancodes returned by the sony-laptop driver for function keys did not match the scancodes used to remap keys. Also, since the scancode was sent to the input subsystem after the mapped keysym the /lib/udev/keymap utility was confused about which scancode to report for which keysym. This patch fixes the driver so the correct scancode is shown for each key. It also adds to the documentation a description of where to find the scancodes. Signed-off-by:
John Hughes <john@calva.com> Acked-by:
Dmitry Torokhov <dtor@mail.ru> Signed-off-by:
-
Alan Cox authored
All the production devices use the PC compatible version of this device so don't use the SCU interfaces or the SCU firmware interfaces. Delete lots of code and conditional paths Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Dmitry Torokhov authored
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by:
-
Marcos Paulo de Souza authored
Signed-off-by:
Marcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by:
-
Josh Boyer authored
When the keyboard backlight support was originally added, the commit said to default it to on with a 10 second timeout. That actually wasn't the case, as the default value is commented out for the kbd_backlight parameter. Because it is a static variable, it gets set to 0 by default without some other form of initialization. However, it seems the function to set the value wasn't actually called immediately, so whatever state the keyboard was in initially would remain. Then commit df410d52 was introduced during the 2.6.39 timeframe to immediately set whatever value was present (as well as attempt to restore/reset the state on module removal or resume). That seems to have now forced the light off immediately when the module is loaded unless the option kbd_backlight=1 is specified. Let's enable it by default again (for the first time). This should solve https://bugzilla.redhat.com/show_bug.cgi?id=728478Signed-off-by:
Josh Boyer <jwboyer@redhat.com> Acked-by:
Mattia Dongili <malattia@linux.it> Signed-off-by:
-
- 18 Mar, 2012 3 commits
-
-
Linus Torvalds authored
-
Jason Baron authored
Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by:
Jason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking changes from David Miller: "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to crashes, particularly during shutdown. Reported by Dave Jones and fixed by Eric Dumazet. 2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have already freed the SKB, which causes crashes as to the caller this means requeue the packet. Fixes from Eric Dumazet. 3) usbnet driver doesn't allocate the right amount of headroom on fresh RX SKBs, fix from Eric Dumazet. 4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it abolutely should not take a reference to 'dev', this leads to leaks. Fix from RonQing Li. 5) Fix netfilter ctnetlink race between delete and timeout expiration. From Pablo Neira Ayuso. 6) Revert SFQ change which causes regressions, specifically queueing to tail can lead to unavoidable flow starvation. From Eric Dumazet. 7) Fix a memory leak and a crash on corrupt firmware files in bnx2x, from Michal Schmidt." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc()
-
- 17 Mar, 2012 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools, x86: Build perf on older user-space as well perf tools: Use scnprintf where applicable perf tools: Incorrect use of snprintf results in SEGV
-
Pablo Neira Ayuso authored
Kerin Millar reported hardlockups while running `conntrackd -c' in a busy firewall. That system (with several processors) was acting as backup in a primary-backup setup. After several tries, I found a race condition between the deletion operation of ctnetlink and timeout expiration. This patch fixes this problem. Tested-by:
Kerin Millar <kerframil@gmail.com> Reported-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
RongQing.Li authored
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't need to dev_hold(). With dev_hold(), not corresponding dev_put(), will lead to leak. [ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ] Signed-off-by:
RongQing.Li <roy.qing.li@gmail.com> Acked-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Linus Torvalds authored
Merge some more email patches from Andrew Morton: "A couple of nilfs fixes" * emailed from Andrew Morton <akpm@linux-foundation.org>: nilfs2: fix NULL pointer dereference in nilfs_load_super_block() nilfs2: clamp ns_r_segments_percentage to [1, 99]
-
Ryusuke Konishi authored
According to the report from Slicky Devil, nilfs caused kernel oops at nilfs_load_super_block function during mount after he shrank the partition without resizing the filesystem: BUG: unable to handle kernel NULL pointer dereference at 00000048 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP ... Call Trace: [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2] [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2] [<c0226636>] mount_fs+0x36/0x180 [<c023d961>] vfs_kern_mount+0x51/0xa0 [<c023ddae>] do_kern_mount+0x3e/0xe0 [<c023f189>] do_mount+0x169/0x700 [<c023fa9b>] sys_mount+0x6b/0xa0 [<c04abd1f>] sysenter_do_call+0x12/0x28 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc CR2: 0000000000000048 This turned out due to a defect in an error path which runs if the calculated location of the secondary super block was invalid. This patch fixes it and eliminates the reported oops. Reported-by:
Slicky Devil <slicky.dvl@gmail.com> Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Haogang Chen authored
ns_r_segments_percentage is read from the disk. Bogus or malicious value could cause integer overflow and malfunction due to meaningless disk usage calculation. This patch reports error when mounting such bogus volumes. Signed-off-by:
Haogang Chen <haogangchen@gmail.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-securityLinus Torvalds authored
Pull maintainer update from James Morris: "Please pull this patch which adds Serge as maintainer of the capabilities code, as discussed on lwn and the lsm list. New capabilities must be signed off by the maintainer, and new uses of any capabilities should at be cc'd to the maintainer." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: MAINTAINERS: Add Serge as maintainer of capabilities
-
git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds authored
Pull c6x bugfix from Mark Salter: "Remove dead code from entry.S which causes a build failure when using a newer assembler (v2.22 complains about it, v2.20 ignores it)." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: remove dead code from entry.S
-
Anton Blanchard authored
When writing files to afs I sometimes hit a BUG: kernel BUG at fs/afs/rxrpc.c:179! With a backtrace of: afs_free_call afs_make_call afs_fs_store_data afs_vnode_store_data afs_write_back_from_locked_page afs_writepages_region afs_writepages The cause is: ASSERT(skb_queue_empty(&call->rx_queue)); Looking at a tcpdump of the session the abort happens because we are exceeding our disk quota: rx abort fs reply store-data error diskquota exceeded (32) So the abort error is valid. We hit the BUG because we haven't freed all the resources for the call. By freeing any skbs in call->rx_queue before calling afs_free_call we avoid hitting leaking memory and avoid hitting the BUG. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
David Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Anton Blanchard authored
A read of a large file on an afs mount failed: # cat junk.file > /dev/null cat: junk.file: Bad message Looking at the trace, call->offset wrapped since it is only an unsigned short. In afs_extract_data: _enter("{%u},{%zu},%d,,%zu", call->offset, len, last, count); ... if (call->offset < count) { if (last) { _leave(" = -EBADMSG [%d < %zu]", call->offset, count); return -EBADMSG; } Which matches the trace: [cat ] ==> afs_extract_data({65132},{524},1,,65536) [cat ] <== afs_extract_data() = -EBADMSG [0 < 65536] call->offset went from 65132 to 0. Fix this by making call->offset an unsigned int. Signed-off-by:
-
- 16 Mar, 2012 5 commits
-
-
Mark Salter authored
The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is outside of the conditional block with the matching ENTRY() macro. This leads a newer (v2.22 vs. v2.20) assembler to complain: /tmp/ccGZBaPT.s: Assembler messages: /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant The conditional block became dead code when c6x switched to generic unistd.h and should be removed along with the offending ENDPROC(). Signed-off-by:
Mark Salter <msalter@redhat.com> Acked-by:
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by:
-
Eric Dumazet authored
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375 (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
Eric Dumazet authored
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by:
Oliver Neukum <oneukum@suse.de> Signed-off-by:
-
Michal Schmidt authored
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Acked-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
