- 12 Mar, 2019 12 commits
-
-
Jack Morgenstein authored
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0 ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jack Morgenstein authored
In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to guarantee that there are no FW commands in progress on the comm channel (for VFs) or wrapped FW commands (on the PF) when SRIOV is active. We do this by also taking the slave_cmd_mutex when SRIOV is active. This is especially important when switching from event to polling, since we free the command-context array during the switch. If there are FW commands in progress (e.g., waiting for a completion event), the completion event handler will access freed memory. Since the decision to use comm_wait or comm_poll is taken before grabbing the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the slave_cmd_mutex as well (to guarantee that the decision to use events or polling and the call to the appropriate cmd function are atomic). Fixes: a7e1f049 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by:
-
Jack Morgenstein authored
As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various fixes Patch #1 fixes the recently introduced QSFP thermal zones to correctly work with split ports, where several ports are mapped to the same module. Patch #2 initializes the base MAC in the minimal driver. The driver is using the base MAC as its parent ID and without initializing it, it is reported as all zeroes to user space. ==================== Signed-off-by: -
Jiri Pirko authored
Currently base_mac is not initialized which causes wrong reporting of zeroed parent_id to userspace. Fix this by initializing base_mac properly. Fixes: c100e47c ("mlxsw: minimal: Add ethtool support") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Vadim Pasternak authored
Verify during thermal initialization if QSFP module's entry is already configured in order to prevent duplication. Such scenario could happen in case two switch drivers (PCI and I2C based) coexist and if after boot, splitting configuration is applied for some ports and then I2C based driver is re-probed. In such case after reboot same QSFP module, associated with split will be discovered by I2C based driver few times, and it will cause a crash. It could happen for example on system equipped with BMC (Baseboard Management Controller), running I2C based driver, when the next steps are performed: - System boot - Host side configures port spilt. - BMC side is rebooted. Fixes: 6a79507c ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Signed-off-by:
Vadim Pasternak <vadimp@mellanox.com> Signed-off-by:
-
Kangjie Lu authored
of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns -EINVAL of it fails. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by:
-
Kangjie Lu authored
of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails. Fixes: b356e978 ("sh_eth: add device tree support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
-
Kangjie Lu authored
In case ioremap fails, the fix releases resources and returns to avoid NULL pointer dereferences. Signed-off-by:
-
Kangjie Lu authored
In case ioremap fails, the fix releases the pcmcia window and returns -ENOMEM to avoid the NULL pointer dereference. Signed-off-by:
-
Kangjie Lu authored
In case create_singlethread_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
-
Kangjie Lu authored
In case ioremap fails, the fix releases resources and returns. The following printk is for logging purpose and thus is preserved. Signed-off-by:
-
- 11 Mar, 2019 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2019-03-11 For -stable v5.0: ('net/mlx5e: Fix access to non-existing receive queue') ('net/mlx5e: Properly get the PF number phys port name ndo') ('net/mlx5: Fix multiple updates of steering rules in parallel') ('net/mlx5: Avoid panic when setting vport mac, getting vport config') ('net/mlx5: Avoid panic when setting vport rate') ('net/mlx5e: IPoIB, Fix RX checksum statistics update') ==================== Signed-off-by: -
xiaofeis authored
Add documentation for a new optional property local-mac-address which is described in ethernet.txt. Signed-off-by:
xiaofeis <xiaofeis@codeaurora.org> Signed-off-by:
-
Kangjie Lu authored
In case kzalloc fails, the fix releases resources and returns NOTIFY_BAD to avoid NULL pointer dereference. Signed-off-by:
-
Kangjie Lu authored
In case alloc_ordered_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree: 1) Fix list corruption in device notifier in the masquerade infrastructure, from Florian Westphal. 2) Fix double-free of sets and use-after-free when deleting elements. 3) Don't bogusly return EBUSY when removing a set after flush command. 4) Use-after-free in dynamically allocate operations. 5) Don't report a new ruleset generation to userspace if transaction list is empty, this invalidates the userspace cache innecessarily. From Florian Westphal. ==================== Signed-off-by: -
Eric Dumazet authored
In case x25_connect() fails and frees the socket neighbour, we also need to undo the change done to x25->state. Before my last bug fix, we had use-after-free so this patch fixes a latent bug. syzbot report : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 16137 Comm: syz-executor.1 Not tainted 5.0.0+ #117 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:x25_write_internal+0x1e8/0xdf0 net/x25/x25_subr.c:173 Code: 00 40 88 b5 e0 fe ff ff 0f 85 01 0b 00 00 48 8b 8b 80 04 00 00 48 ba 00 00 00 00 00 fc ff df 48 8d 79 1c 48 89 fe 48 c1 ee 03 <0f> b6 34 16 48 89 fa 83 e2 07 83 c2 03 40 38 f2 7c 09 40 84 f6 0f RSP: 0018:ffff888076717a08 EFLAGS: 00010207 RAX: ffff88805f2f2292 RBX: ffff8880a0ae6000 RCX: 0000000000000000 kobject: 'loop5' (0000000018d0d0ee): kobject_uevent_env RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 000000000000001c RBP: ffff888076717b40 R08: ffff8880950e0580 R09: ffffed100be5e46d R10: ffffed100be5e46c R11: ffff88805f2f2363 R12: ffff888065579840 kobject: 'loop5' (0000000018d0d0ee): fill_kobj_path: path = '/devices/virtual/block/loop5' R13: 1ffff1100ece2f47 R14: 0000000000000013 R15: 0000000000000013 FS: 00007fb88cf43700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9a42a41028 CR3: 0000000087a67000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: x25_release+0xd0/0x340 net/x25/af_x25.c:658 __sock_release+0xd3/0x2b0 net/socket.c:579 sock_close+0x1b/0x30 net/socket.c:1162 __fput+0x2df/0x8d0 fs/file_table.c:278 ____fput+0x16/0x20 fs/file_table.c:309 task_work_run+0x14a/0x1c0 kernel/task_work.c:113 get_signal+0x1961/0x1d50 kernel/signal.c:2388 do_signal+0x87/0x1940 arch/x86/kernel/signal.c:816 exit_to_usermode_loop+0x244/0x2c0 arch/x86/entry/common.c:162 prepare_exit_to_usermode arch/x86/entry/common.c:197 [inline] syscall_return_slowpath arch/x86/entry/common.c:268 [inline] do_syscall_64+0x52d/0x610 arch/x86/entry/common.c:293 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb88cf42c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: fffffffffffffe00 RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000012 RSI: 0000000020000080 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fb88cf436d4 R13: 00000000004be462 R14: 00000000004cec98 R15: 00000000ffffffff Modules linked in: Fixes: 95d6ebd5 ("net/x25: fix use-after-free in x25_device_event()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: andrew hendry <andrew.hendry@gmail.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Christoph Paasch authored
Since commit eeea10b8 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()"), tcp_vX_fill_cb is only called after tcp_filter(). That means, TCP_SKB_CB(skb)->end_seq still points to the IP-part of the cb. We thus should not mock with it, as this can trigger bugs (thanks syzkaller): [ 12.349396] ================================================================== [ 12.350188] BUG: KASAN: slab-out-of-bounds in ip6_datagram_recv_specific_ctl+0x19b3/0x1a20 [ 12.351035] Read of size 1 at addr ffff88006adbc208 by task test_ip6_datagr/1799 Setting end_seq is actually no more necessary in tcp_filter as it gets initialized later on in tcp_vX_fill_cb. Cc: Eric Dumazet <edumazet@google.com> Fixes: eeea10b8 ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()") Signed-off-by:
Christoph Paasch <cpaasch@apple.com> Signed-off-by:
-
Kangjie Lu authored
In case alloc_ordered_workqueue fails, the fix reports the error and returns -ENOMEM. Signed-off-by:
-
Kangjie Lu authored
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereferences. Signed-off-by:
-
Bryan Whitehead authored
It has been noticed that running the speed test at www.speedtest.net occasionally causes a kernel panic. Investigation revealed that under this test RX buffer allocation sometimes fails and returns NULL. But the lan743x driver did not handle this case. This patch fixes this issue by attempting to allocate a buffer before sending the new rx packet to the OS. If the allocation fails then the new rx packet is dropped and the existing buffer is reused in the DMA ring. Updates for v2: Additional 2 locations where allocation was not checked, has been changed to reuse existing buffer. Fixes: 23f0703c ("lan743x: Add main source files for new lan743x driver") Signed-off-by:Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
Florian Westphal authored
When running 'nft flush ruleset' while no rules exist, we will increment the generation counter and announce a new genid to userspace, yet nothing had changed in the first place. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Kangjie Lu authored
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by:
-
Tonghao Zhang authored
If we try to set VFs rate on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1 If not applied the first patch ("net/mlx5: Avoid panic when setting vport mac, getting vport config"), the command: $ ip link set $MLX_VF0 vf 0 rate 100 can also crash the kernel. [ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core] [ 1650.007092] do_setlink+0x982/0xd20 [ 1650.007129] __rtnl_newlink+0x528/0x7d0 [ 1650.007374] rtnl_newlink+0x43/0x60 [ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320 [ 1650.007484] netlink_rcv_skb+0xcb/0x100 [ 1650.007519] netlink_unicast+0x17f/0x230 [ 1650.007554] netlink_sendmsg+0x2d2/0x3d0 [ 1650.007592] sock_sendmsg+0x36/0x50 [ 1650.007625] ___sys_sendmsg+0x280/0x2a0 [ 1650.007963] __sys_sendmsg+0x58/0xa0 [ 1650.007998] do_syscall_64+0x5b/0x180 [ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c9497c98 ("net/mlx5: Add support for setting VF min rate") Cc: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Acked-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Tonghao Zhang authored
If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a05 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by:
-
Tariq Toukan authored
In case number of channels is changed while interface is down, RSS indirection table is mistakenly not modified accordingly, causing access to out-of-range non-existing object. Fix by updating the RSS indireciton table also in the early return flow of interface down. Fixes: fb35c534 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow") Fixes: bbeb53b8 ("net/mlx5e: Move RSS params to a dedicated struct") Reported-by:
Or Gerlitz <ogerlitz@mellanox.com> Tested-by:
Maria Pasechnik <mariap@mellanox.com> Signed-off-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Feras Daoud authored
Update the RX checksum only if the feature is enabled. Fixes: 9d6bd752 ("net/mlx5e: IPoIB, RX handler") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
-
Roi Dayan authored
The function is not being used. Signed-off-by:
-
Roi Dayan authored
Currently, we fail to retrieve the PF number in some cases (e.g single ported cards, lag capability), this further results in a call trace issued by the rtnetlink code, since the error value is not -EOPNOTSUPP. Change the implementation to be independent from the lag code and function properly on both two ports and single ported cards. Call Trace: [ 194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num [ 194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G W O 5.0.0-rc7+ #3 [ 194.531307] Workqueue: events linkwatch_event [ 194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.545007] Call Trace: [ 194.545406] rtmsg_ifinfo_event.part.29+0x1b/0xb0 [ 194.545810] rtmsg_ifinfo+0x51/0x80 [ 194.546209] netdev_state_change+0xc7/0x110 [ 194.546608] ? dev_valid_name+0x1b0/0x1b0 [ 194.547010] ? __local_bh_enable_ip+0xef/0x1d0 [ 194.547411] ? lockdep_hardirqs_on+0x3ea/0x560 [ 194.547811] ? linkwatch_do_dev+0x9b/0x100 [ 194.548207] linkwatch_do_dev+0x9b/0x100 [ 194.548605] __linkwatch_run_queue+0x244/0x430 [ 194.549014] ? linkwatch_schedule_work+0x100/0x100 [ 194.549412] ? lock_acquire+0x10f/0x2d0 [ 194.549816] linkwatch_event+0x3f/0x50 [ 194.550212] process_one_work+0x7d3/0x1460 Fixes: c12ecc23 ("net/mlx5e: Move to use common phys port names for vport representors") Signed-off-by:
-
Eli Britstein authored
With commit a18e879d ("net/mlx5e: Annul encap action ordering requirement") and a use-case of e-switch remote mirroring, the incremental/stepped FTE removal process done by the fs core got us to illegal transient states and FW errors: SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x9c2e40) To avoid that and improve FTE removal performance, aggregate the FTE's updates that should be applied. Remove the FTE if it is empty, or apply one FW update command with the aggregated updates. Fixes: a18e879d ("net/mlx5e: Annul encap action ordering requirement") Signed-off-by:
Eli Britstein <elibr@mellanox.com> Reviewed-by:
Maor Gottlieb <maorg@mellanox.com> Reviewed-by:
Mark Bloch <markb@mellanox.com> Signed-off-by:
-
Eli Britstein authored
Add a locked flag to the node removal functions to signal if the parent is already locked from the caller function or not as a pre-step towards outside lock. Currently always use false with no functional change. Signed-off-by:
-
Eli Britstein authored
Add modify FTE helper function and use it when deleting a rule, as a pre-step towards consolidated FTE modification, with no functional change. Signed-off-by:
-
Eli Britstein authored
There might be a condition where the fte found is not active yet. In this case we should not use it, but continue to search for another, or allocate a new one. Fixes: bd71b08e ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by:
-
Arnd Bergmann authored
Referencing the __kernel_long_t type caused some user space applications to stop compiling when they had not already included linux/posix_types.h, e.g. s/multicast.c -o ext/sockets/multicast.lo In file included from /builddir/build/BUILD/php-7.3.3/main/php.h:468, from /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:27: /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c: In function 'zm_startup_sockets': /builddir/build/BUILD/php-7.3.3/ext/sockets/sockets.c:776:40: error: '__kernel_long_t' undeclared (first use in this function) 776 | REGISTER_LONG_CONSTANT("SO_SNDTIMEO", SO_SNDTIMEO, CONST_CS | CONST_PERSISTENT); It is safe to include that header here, since it only contains kernel internal types that do not conflict with other user space types. It's still possible that some related build failures remain, but those are likely to be for code that is not already y2038 safe. Reported-by:Laura Abbott <labbott@redhat.com> Fixes: a9beb86a ("sock: Add SO_RCVTIMEO_NEW and SO_SNDTIMEO_NEW") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Miaohe Lin authored
In func check_6rd,tunnel->ip6rd.relay_prefixlen may equal to 32,so UBSAN complain about it. UBSAN: Undefined behaviour in net/ipv6/sit.c:781:47 shift exponent 32 is too large for 32-bit type 'unsigned int' CPU: 6 PID: 20036 Comm: syz-executor.0 Not tainted 4.19.27 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 ubsan_epilogue+0xe/0x81 lib/ubsan.c:159 __ubsan_handle_shift_out_of_bounds+0x293/0x2e8 lib/ubsan.c:425 check_6rd.constprop.9+0x433/0x4e0 net/ipv6/sit.c:781 try_6rd net/ipv6/sit.c:806 [inline] ipip6_tunnel_xmit net/ipv6/sit.c:866 [inline] sit_tunnel_xmit+0x141c/0x2720 net/ipv6/sit.c:1033 __netdev_start_xmit include/linux/netdevice.h:4300 [inline] netdev_start_xmit include/linux/netdevice.h:4309 [inline] xmit_one net/core/dev.c:3243 [inline] dev_hard_start_xmit+0x17c/0x780 net/core/dev.c:3259 __dev_queue_xmit+0x1656/0x2500 net/core/dev.c:3829 neigh_output include/net/neighbour.h:501 [inline] ip6_finish_output2+0xa36/0x2290 net/ipv6/ip6_output.c:120 ip6_finish_output+0x3e7/0xa20 net/ipv6/ip6_output.c:154 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip6_output+0x1e2/0x720 net/ipv6/ip6_output.c:171 dst_output include/net/dst.h:444 [inline] ip6_local_out+0x99/0x170 net/ipv6/output_core.c:176 ip6_send_skb+0x9d/0x2f0 net/ipv6/ip6_output.c:1697 ip6_push_pending_frames+0xc0/0x100 net/ipv6/ip6_output.c:1717 rawv6_push_pending_frames net/ipv6/raw.c:616 [inline] rawv6_sendmsg+0x2435/0x3530 net/ipv6/raw.c:946 inet_sendmsg+0xf8/0x5c0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:621 [inline] sock_sendmsg+0xc8/0x110 net/socket.c:631 ___sys_sendmsg+0x6cf/0x890 net/socket.c:2114 __sys_sendmsg+0xf0/0x1b0 net/socket.c:2152 do_syscall_64+0xc8/0x580 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by:
linmiaohe <linmiaohe@huawei.com> Signed-off-by:
-
Pablo Neira Ayuso authored
Smatch reports: net/netfilter/nf_tables_api.c:2167 nf_tables_expr_destroy() error: dereferencing freed memory 'expr->ops' net/netfilter/nf_tables_api.c 2162 static void nf_tables_expr_destroy(const struct nft_ctx *ctx, 2163 struct nft_expr *expr) 2164 { 2165 if (expr->ops->destroy) 2166 expr->ops->destroy(ctx, expr); ^^^^ --> 2167 module_put(expr->ops->type->owner); ^^^^^^^^^ 2168 } Smatch says there are three functions which free expr->ops. Fixes: b8e20400 ("netfilter: nft_compat: use .release_ops and remove list of extension") Reported-by:Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Pablo Neira Ayuso authored
Set deletion after flush coming in the same batch results in EBUSY. Add set use counter to track the number of references to this set from rules. We cannot rely on the list of bindings for this since such list is still populated from the preparation phase. Reported-by:
Václav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by:
-
- 10 Mar, 2019 2 commits
-
-
Eric Dumazet authored
We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc64 ("net: add gro_cells infrastructure") Signed-off-by:
-
Eric Dumazet authored
Same reasons than the ones explained in commit 4179cb5a ("vxlan: test dev->flags & IFF_UP before calling netif_rx()") netif_rx() or gro_cells_receive() must be called under a strict contract. At device dismantle phase, core networking clears IFF_UP and flush_all_backlogs() is called after rcu grace period to make sure no incoming packet might be in a cpu backlog and still referencing the device. A similar protocol is used for gro_cells infrastructure, as gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. Most drivers call netif_rx() from their interrupt handler, and since the interrupts are disabled at device dismantle, netif_rx() does not have to check dev->flags & IFF_UP Virtual drivers do not have this guarantee, and must therefore make the check themselves. Otherwise we risk use-after-free and/or crashes. Fixes: d342894c ("vxlan: virtual extensible lan") Signed-off-by:
-
