* show server&TCP states for extra channels
* mention if an interface has a channel connected to it

In this version three of the patch, fixed minor printk format
issue pointed out by the kbuild robot.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Number of requests in_send and the number of waiters on sendRecv
are useful counters in various cases, move them from
CONFIG_CIFS_STATS2 to be on by default especially with multichannel
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>

Previously we would only loop over the iface list once.
This patch tries to loop over multiple times until all channels are
opened. It will also try to reuse RSS ifaces.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currenly we doesn't assume that a server may break a lease
from RWH to RW which causes us setting a wrong lease state
on a file and thus mistakenly flushing data and byte-range
locks and purging cached data on the client. This leads to
performance degradation because subsequent IOs go directly
to the server.

Fix this by propagating new lease state and epoch values
to the oplock break handler through cifsFileInfo structure
and removing the use of cifsInodeInfo flags for that. It
allows to avoid some races of several lease/oplock breaks
using those flags in parallel.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

This patch moves the final part of the cifsFileInfo_put() logic where we
need a write lock on lock_sem to be processed in a separate thread that
holds no other locks.
This is to prevent deadlocks like the one below:

> there are 6 processes looping to while trying to down_write
> cinode->lock_sem, 5 of them from _cifsFileInfo_put, and one from
> cifs_new_fileinfo
>
> and there are 5 other processes which are blocked, several of them
> waiting on either PG_writeback or PG_locked (which are both set), all
> for the same page of the file
>
> 2 inode_lock() (inode->i_rwsem) for the file
> 1 wait_on_page_writeback() for the page
> 1 down_read(inode->i_rwsem) for the inode of the directory
> 1 inode_lock()(inode->i_rwsem) for the inode of the directory
> 1 __lock_page
>
>
> so processes are blocked waiting on:
>   page flags PG_locked and PG_writeback for one specific page
>   inode->i_rwsem for the directory
>   inode->i_rwsem for the file
>   cifsInodeInflock_sem
>
>
>
> here are the more gory details (let me know if I need to provide
> anything more/better):
>
> [0 00:48:22.765] [UN]  PID: 8863   TASK: ffff8c691547c5c0  CPU: 3
> COMMAND: "reopen_file"
>  #0 [ffff9965007e3ba8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007e3c38] schedule at ffffffff9b6e64df
>  #2 [ffff9965007e3c48] rwsem_down_write_slowpath at ffffffff9af283d7
>  #3 [ffff9965007e3cb8] legitimize_path at ffffffff9b0f975d
>  #4 [ffff9965007e3d08] path_openat at ffffffff9b0fe55d
>  #5 [ffff9965007e3dd8] do_filp_open at ffffffff9b100a33
>  #6 [ffff9965007e3ee0] do_sys_open at ffffffff9b0eb2d6
>  #7 [ffff9965007e3f38] do_syscall_64 at ffffffff9ae04315
> * (I think legitimize_path is bogus)
>
> in path_openat
>         } else {
>                 const char *s = path_init(nd, flags);
>                 while (!(error = link_path_walk(s, nd)) &&
>                         (error = do_last(nd, file, op)) > 0) {  <<<<
>
> do_last:
>         if (open_flag & O_CREAT)
>                 inode_lock(dir->d_inode);  <<<<
>         else
> so it's trying to take inode->i_rwsem for the directory
>
>      DENTRY           INODE           SUPERBLK     TYPE PATH
> ffff8c68bb8e79c0 ffff8c691158ef20 ffff8c6915bf9000 DIR  /mnt/vm1_smb/
> inode.i_rwsem is ffff8c691158efc0
>
> <struct rw_semaphore 0xffff8c691158efc0>:
>         owner: <struct task_struct 0xffff8c6914275d00> (UN -   8856 -
> reopen_file), counter: 0x0000000000000003
>         waitlist: 2
>         0xffff9965007e3c90     8863   reopen_file      UN 0  1:29:22.926
>   RWSEM_WAITING_FOR_WRITE
>         0xffff996500393e00     9802   ls               UN 0  1:17:26.700
>   RWSEM_WAITING_FOR_READ
>
>
> the owner of the inode.i_rwsem of the directory is:
>
> [0 00:00:00.109] [UN]  PID: 8856   TASK: ffff8c6914275d00  CPU: 3
> COMMAND: "reopen_file"
>  #0 [ffff99650065b828] __schedule at ffffffff9b6e6095
>  #1 [ffff99650065b8b8] schedule at ffffffff9b6e64df
>  #2 [ffff99650065b8c8] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff99650065b940] msleep at ffffffff9af573a9
>  #4 [ffff99650065b948] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
>  #5 [ffff99650065ba38] cifs_writepage_locked at ffffffffc0a0b8f3 [cifs]
>  #6 [ffff99650065bab0] cifs_launder_page at ffffffffc0a0bb72 [cifs]
>  #7 [ffff99650065bb30] invalidate_inode_pages2_range at ffffffff9b04d4bd
>  #8 [ffff99650065bcb8] cifs_invalidate_mapping at ffffffffc0a11339 [cifs]
>  #9 [ffff99650065bcd0] cifs_revalidate_mapping at ffffffffc0a1139a [cifs]
> #10 [ffff99650065bcf0] cifs_d_revalidate at ffffffffc0a014f6 [cifs]
> #11 [ffff99650065bd08] path_openat at ffffffff9b0fe7f7
> #12 [ffff99650065bdd8] do_filp_open at ffffffff9b100a33
> #13 [ffff99650065bee0] do_sys_open at ffffffff9b0eb2d6
> #14 [ffff99650065bf38] do_syscall_64 at ffffffff9ae04315
>
> cifs_launder_page is for page 0xffffd1e2c07d2480
>
> crash> page.index,mapping,flags 0xffffd1e2c07d2480
>       index = 0x8
>       mapping = 0xffff8c68f3cd0db0
>   flags = 0xfffffc0008095
>
>   PAGE-FLAG       BIT  VALUE
>   PG_locked         0  0000001
>   PG_uptodate       2  0000004
>   PG_lru            4  0000010
>   PG_waiters        7  0000080
>   PG_writeback     15  0008000
>
>
> inode is ffff8c68f3cd0c40
> inode.i_rwsem is ffff8c68f3cd0ce0
>      DENTRY           INODE           SUPERBLK     TYPE PATH
> ffff8c68a1f1b480 ffff8c68f3cd0c40 ffff8c6915bf9000 REG
> /mnt/vm1_smb/testfile.8853
>
>
> this process holds the inode->i_rwsem for the parent directory, is
> laundering a page attached to the inode of the file it's opening, and in
> _cifsFileInfo_put is trying to down_write the cifsInodeInflock_sem
> for the file itself.
>
>
> <struct rw_semaphore 0xffff8c68f3cd0ce0>:
>         owner: <struct task_struct 0xffff8c6914272e80> (UN -   8854 -
> reopen_file), counter: 0x0000000000000003
>         waitlist: 1
>         0xffff9965005dfd80     8855   reopen_file      UN 0  1:29:22.912
>   RWSEM_WAITING_FOR_WRITE
>
> this is the inode.i_rwsem for the file
>
> the owner:
>
> [0 00:48:22.739] [UN]  PID: 8854   TASK: ffff8c6914272e80  CPU: 2
> COMMAND: "reopen_file"
>  #0 [ffff99650054fb38] __schedule at ffffffff9b6e6095
>  #1 [ffff99650054fbc8] schedule at ffffffff9b6e64df
>  #2 [ffff99650054fbd8] io_schedule at ffffffff9b6e68e2
>  #3 [ffff99650054fbe8] __lock_page at ffffffff9b03c56f
>  #4 [ffff99650054fc80] pagecache_get_page at ffffffff9b03dcdf
>  #5 [ffff99650054fcc0] grab_cache_page_write_begin at ffffffff9b03ef4c
>  #6 [ffff99650054fcd0] cifs_write_begin at ffffffffc0a064ec [cifs]
>  #7 [ffff99650054fd30] generic_perform_write at ffffffff9b03bba4
>  #8 [ffff99650054fda8] __generic_file_write_iter at ffffffff9b04060a
>  #9 [ffff99650054fdf0] cifs_strict_writev.cold.70 at ffffffffc0a4469b [cifs]
> #10 [ffff99650054fe48] new_sync_write at ffffffff9b0ec1dd
> #11 [ffff99650054fed0] vfs_write at ffffffff9b0eed35
> #12 [ffff99650054ff00] ksys_write at ffffffff9b0eefd9
> #13 [ffff99650054ff38] do_syscall_64 at ffffffff9ae04315
>
> the process holds the inode->i_rwsem for the file to which it's writing,
> and is trying to __lock_page for the same page as in the other processes
>
>
> the other tasks:
> [0 00:00:00.028] [UN]  PID: 8859   TASK: ffff8c6915479740  CPU: 2
> COMMAND: "reopen_file"
>  #0 [ffff9965007b39d8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007b3a68] schedule at ffffffff9b6e64df
>  #2 [ffff9965007b3a78] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff9965007b3af0] msleep at ffffffff9af573a9
>  #4 [ffff9965007b3af8] cifs_new_fileinfo.cold.61 at ffffffffc0a42a07 [cifs]
>  #5 [ffff9965007b3b78] cifs_open at ffffffffc0a0709d [cifs]
>  #6 [ffff9965007b3cd8] do_dentry_open at ffffffff9b0e9b7a
>  #7 [ffff9965007b3d08] path_openat at ffffffff9b0fe34f
>  #8 [ffff9965007b3dd8] do_filp_open at ffffffff9b100a33
>  #9 [ffff9965007b3ee0] do_sys_open at ffffffff9b0eb2d6
> #10 [ffff9965007b3f38] do_syscall_64 at ffffffff9ae04315
>
> this is opening the file, and is trying to down_write cinode->lock_sem
>
>
> [0 00:00:00.041] [UN]  PID: 8860   TASK: ffff8c691547ae80  CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.057] [UN]  PID: 8861   TASK: ffff8c6915478000  CPU: 3
> COMMAND: "reopen_file"
> [0 00:00:00.059] [UN]  PID: 8858   TASK: ffff8c6914271740  CPU: 2
> COMMAND: "reopen_file"
> [0 00:00:00.109] [UN]  PID: 8862   TASK: ffff8c691547dd00  CPU: 6
> COMMAND: "reopen_file"
>  #0 [ffff9965007c3c78] __schedule at ffffffff9b6e6095
>  #1 [ffff9965007c3d08] schedule at ffffffff9b6e64df
>  #2 [ffff9965007c3d18] schedule_timeout at ffffffff9b6e9f89
>  #3 [ffff9965007c3d90] msleep at ffffffff9af573a9
>  #4 [ffff9965007c3d98] _cifsFileInfo_put.cold.63 at ffffffffc0a42dd6 [cifs]
>  #5 [ffff9965007c3e88] cifs_close at ffffffffc0a07aaf [cifs]
>  #6 [ffff9965007c3ea0] __fput at ffffffff9b0efa6e
>  #7 [ffff9965007c3ee8] task_work_run at ffffffff9aef1614
>  #8 [ffff9965007c3f20] exit_to_usermode_loop at ffffffff9ae03d6f
>  #9 [ffff9965007c3f38] do_syscall_64 at ffffffff9ae0444c
>
> closing the file, and trying to down_write cifsi->lock_sem
>
>
> [0 00:48:22.839] [UN]  PID: 8857   TASK: ffff8c6914270000  CPU: 7
> COMMAND: "reopen_file"
>  #0 [ffff9965006a7cc8] __schedule at ffffffff9b6e6095
>  #1 [ffff9965006a7d58] schedule at ffffffff9b6e64df
>  #2 [ffff9965006a7d68] io_schedule at ffffffff9b6e68e2
>  #3 [ffff9965006a7d78] wait_on_page_bit at ffffffff9b03cac6
>  #4 [ffff9965006a7e10] __filemap_fdatawait_range at ffffffff9b03b028
>  #5 [ffff9965006a7ed8] filemap_write_and_wait at ffffffff9b040165
>  #6 [ffff9965006a7ef0] cifs_flush at ffffffffc0a0c2fa [cifs]
>  #7 [ffff9965006a7f10] filp_close at ffffffff9b0e93f1
>  #8 [ffff9965006a7f30] __x64_sys_close at ffffffff9b0e9a0e
>  #9 [ffff9965006a7f38] do_syscall_64 at ffffffff9ae04315
>
> in __filemap_fdatawait_range
>                         wait_on_page_writeback(page);
> for the same page of the file
>
>
>
> [0 00:48:22.718] [UN]  PID: 8855   TASK: ffff8c69142745c0  CPU: 7
> COMMAND: "reopen_file"
>  #0 [ffff9965005dfc98] __schedule at ffffffff9b6e6095
>  #1 [ffff9965005dfd28] schedule at ffffffff9b6e64df
>  #2 [ffff9965005dfd38] rwsem_down_write_slowpath at ffffffff9af283d7
>  #3 [ffff9965005dfdf0] cifs_strict_writev at ffffffffc0a0c40a [cifs]
>  #4 [ffff9965005dfe48] new_sync_write at ffffffff9b0ec1dd
>  #5 [ffff9965005dfed0] vfs_write at ffffffff9b0eed35
>  #6 [ffff9965005dff00] ksys_write at ffffffff9b0eefd9
>  #7 [ffff9965005dff38] do_syscall_64 at ffffffff9ae04315
>
>         inode_lock(inode);
>
>
> and one 'ls' later on, to see whether the rest of the mount is available
> (the test file is in the root, so we get blocked up on the directory
> ->i_rwsem), so the entire mount is unavailable
>
> [0 00:36:26.473] [UN]  PID: 9802   TASK: ffff8c691436ae80  CPU: 4
> COMMAND: "ls"
>  #0 [ffff996500393d28] __schedule at ffffffff9b6e6095
>  #1 [ffff996500393db8] schedule at ffffffff9b6e64df
>  #2 [ffff996500393dc8] rwsem_down_read_slowpath at ffffffff9b6e9421
>  #3 [ffff996500393e78] down_read_killable at ffffffff9b6e95e2
>  #4 [ffff996500393e88] iterate_dir at ffffffff9b103c56
>  #5 [ffff996500393ec8] ksys_getdents64 at ffffffff9b104b0c
>  #6 [ffff996500393f30] __x64_sys_getdents64 at ffffffff9b104bb6
>  #7 [ffff996500393f38] do_syscall_64 at ffffffff9ae04315
>
> in iterate_dir:
>         if (shared)
>                 res = down_read_killable(&inode->i_rwsem);  <<<<
>         else
>                 res = down_write_killable(&inode->i_rwsem);
>
Reported-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

After doing mount() successfully we call cifs_try_adding_channels()
which will open as many channels as it can.

Channels are closed when the master session is closed.

The master connection becomes the first channel.

,-------------> global cifs_tcp_ses_list <-------------------------.
|                                                                  |
'- TCP_Server_Info  <-->  TCP_Server_Info  <-->  TCP_Server_Info <-'
      (master con)           (chan#1 con)         (chan#2 con)
      |      ^                    ^                    ^
      v      '--------------------|--------------------'
   cifs_ses                       |
   - chan_count = 3               |
   - chans[] ---------------------'
   - smb3signingkey[]
      (master signing key)

Note how channel connections don't have sessions. That's because
cifs_ses can only be part of one linked list (list_head are internal
to the elements).

For signing keys, each channel has its own signing key which must be
used only after the channel has been bound. While it's binding it must
use the master session signing key.

For encryption keys, since channel connections do not have sessions
attached we must now find matching session by looping over all sessions
in smb2_get_enc_key().

Each channel is opened like a regular server connection but at the
session setup request step it must set the
SMB2_SESSION_REQ_FLAG_BINDING flag and use the session id to bind to.

Finally, while sending in compound_send_recv() for requests that
aren't negprot, ses-setup or binding related, use a channel by cycling
through the available ones (round-robin).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Make logic of cifs_get_inode() much clearer by moving code to sub
functions and adding comments.

Document the steps this function does.

cifs_get_inode_info() gets and updates a file inode metadata from its
file path.

* If caller already has raw info data from server they can pass it.
* If inode already exists (just need to update) caller can pass it.

Step 1: get raw data from server if none was passed
Step 2: parse raw data into intermediate internal cifs_fattr struct
Step 3: set fattr uniqueid which is later used for inode number. This
        can sometime be done from raw data
Step 4: tweak fattr according to mount options (file_mode, acl to mode
        bits, uid, gid, etc)
Step 5: update or create inode from final fattr struct

* add is_smb1_server() helper
* add is_inode_cache_good() helper
* move SMB1-backupcreds-getinfo-retry to separate func
  cifs_backup_query_path_info().
* move set-uniqueid code to separate func cifs_set_fattr_ino()
* don't clobber uniqueid from backup cred retry
* fix some probable corner cases memleaks
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently a lot of the code to initialize a connection & session uses
the cifs_ses as input. But depending on if we are opening a new session
or a new channel we need to use different server pointers.

Add a "binding" flag in cifs_ses and a helper function that returns
the server ptr a session should use (only in the sess establishment
code path).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

As we get down to the transport layer, plenty of functions are passed
the session pointer and assume the transport to use is ses->server.

Instead we modify those functions to pass (ses, server) so that we
can decouple the session from the server.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

adds:
- [no]multichannel to enable/disable multichannel
- max_channels=N to control how many channels to create

these options are then stored in the volume struct.

- store channels and max_channels in cifs_ses
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

New channels are going to be opened by walking the list sequentially,
so by sorting it we will connect to the fastest interfaces first.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Even when mounting modern protocol version the server may be
configured without supporting SMB2.1 leases and the client
uses SMB2 oplock to optimize IO performance through local caching.

However there is a problem in oplock break handling that leads
to missing a break notification on the client who has a file
opened. It latter causes big latencies to other clients that
are trying to open the same file.

The problem reproduces when there are multiple shares from the
same server mounted on the client. The processing code tries to
match persistent and volatile file ids from the break notification
with an open file but it skips all share besides the first one.
Fix this by looking up in all shares belonging to the server that
issued the oplock break.

Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

It can cause
to fail with
modprobe: FATAL: Module <module> is builtin.

RHBZ: 1767094
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

During reconnecting, the transport may have already been destroyed and is in
the process being reconnected. In this case, return -EAGAIN to not fail and
to retry this I/O.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

It's not necessary to queue invalidated memory registration to work queue, as
all we need to do is to unmap the SG and make it usable again. This can save
CPU cycles in normal data paths as memory registration errors are rare and
normally only happens during reconnection.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Helps distinguish between an interrupted close and a truly
unmatched open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

When an OPEN command is cancelled we mark a mid as
cancelled and let the demultiplex thread process it
by closing an open handle. The problem is there is
a race between a system call thread and the demultiplex
thread and there may be a situation when the mid has
been already processed before it is set as cancelled.

Fix this by processing cancelled requests when mids
are being destroyed which means that there is only
one thread referencing a particular mid. Also set
mids as cancelled unconditionally on their state.

Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

There is a race between a system call processing thread
and the demultiplex thread when mid->resp_buf becomes NULL
and later is being accessed to get credits. It happens when
the 1st thread wakes up before a mid callback is called in
the 2nd one but the mid state has already been set to
MID_RESPONSE_RECEIVED. This causes NULL pointer dereference
in mid callback.

Fix this by saving credits from the response before we
update the mid state and then use this value in the mid
callback rather then accessing a response buffer.

Cc: Stable <stable@vger.kernel.org>
Fixes: ee258d79 ("CIFS: Move credit processing to mid callbacks for SMB3")
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

If Close command is interrupted before sending a request
to the server the client ends up leaking an open file
handle. This wastes server resources and can potentially
block applications that try to remove the file or any
directory containing this file.

Fix this by putting the close command into a worker queue,
so another thread retries it later.

Cc: Stable <stable@vger.kernel.org>
Tested-by: Frank Sorenson <sorenson@redhat.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Currently the client translates O_SYNC and O_DIRECT flags
into corresponding SMB create options when openning a file.
The problem is that on reconnect when the file is being
re-opened the client doesn't set those flags and it causes
a server to reject re-open requests because create options
don't match. The latter means that any subsequent system
call against that open file fail until a share is re-mounted.

Fix this by properly setting SMB create options when
re-openning files after reconnects.

Fixes: 1013e760: ("SMB3: Don't ignore O_SYNC/O_DSYNC and O_DIRECT flags")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The smb2/smb3 message checking code was logging to dmesg when mounting
with encryption ("seal") for compounded SMB3 requests.  When encrypted
the whole frame (including potentially multiple compounds) is read
so the length field is longer than in the case of non-encrypted
case (where length field will match the the calculated length for
the particular SMB3 request in the compound being validated).

Avoids the warning on mount (with "seal"):

   "srv rsp padded more than expected. Length 384 not ..."
Signed-off-by: Steve French <stfrench@microsoft.com>

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Return directly after a call of the function "build_path_from_dentry"
failed at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

Move the same error code assignments so that such exception handling
can be better reused at the end of this function.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.

Generated by: scripts/coccinelle/api/memdup_user.cocci

Fixes: f5b05d62 ("cifs: add IOCTL for QUERY_INFO passthrough to userspace")
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Steve French <stfrench@microsoft.com>

The transport should return this error so the upper layer will reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Log these activities to help production support.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

While it's not friendly to fail user processes that issue more iovs
than we support, at least we should return the correct error code so the
user process gets a chance to retry with smaller number of iovs.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

On re-send, there might be a reconnect and all prevoius memory registrations
need to be invalidated and deregistered.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

On reconnect, the transport data structure is NULL and its information is not
available.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>

Fixes gcc '-Wunused-but-set-variable' warning:

fs/cifs/file.c: In function 'cifs_flock':
fs/cifs/file.c:1704:8: warning:
 variable 'netfid' set but not used [-Wunused-but-set-variable]

fs/cifs/file.c:1702:24: warning:
 variable 'cinode' set but not used [-Wunused-but-set-variable]
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

The flock system call locks the whole file rather than a byte
range and so is currently emulated by various other file systems
by simply sending a byte range lock for the whole file.
Add flock handling for cifs.ko in similar way.

xfstest generic/504 passes with this as well
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>

fs/cifs/cifsacl.c:43:30: warning:
 sid_user defined but not used [-Wunused-const-variable=]

It is never used, so remove it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Smatch gets confused because we sometimes refer to "server->srv_mutex" and
sometimes to "sess->server->srv_mutex".  They refer to the same lock so
let's just make this consistent.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull cramfs fix from Al Viro:
 "Regression fix, fallen through the cracks"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  cramfs: fix usage on non-MTD device

When both CONFIG_CRAMFS_MTD and CONFIG_CRAMFS_BLOCKDEV are enabled, if
we fail to mount on MTD, we don't try on block device.

Note: this relies upon cramfs_mtd_fill_super() leaving no side
effects on fc state in case of failure; in general, failing
get_tree_...() does *not* mean "fine to try again"; e.g. parsed
options might've been consumed by fill_super callback and freed
on failure.

Fixes: 74f78fc5 ("vfs: Convert cramfs to use the new mount API")
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull last minute virtio bugfixes from Michael Tsirkin:
 "Minor bugfixes all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_balloon: fix shrinker count
  virtio_balloon: fix shrinker scan number of pages
  virtio_console: allocate inbufs in add_port() only if it is needed
  virtio_ring: fix return code on DMA mapping fails

Pull input fix from Dmitry Torokhov:
 "Just a single revert as RMI mode should not have been enabled for this
  model [yet?]"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Revert "Input: synaptics - enable RMI mode for X1 Extreme 2nd Generation"

This reverts commit 68b9c5066e39af41d3448abfc887c77ce22dd64d.

Ugh, I really dropped the ball on this one :\. So as it turns out RMI4
works perfectly fine on the X1 Extreme Gen 2 except for one thing I
didn't notice because I usually use the trackpoint: clicking with the
touchpad. Somehow this is broken, in fact we don't even seem to indicate
BTN_LEFT as a valid event type for the RMI4 touchpad. And, I don't even
see any RMI4 events coming from the touchpad when I press down on it.
This only seems to work for PS/2 mode.

Since that means we have a regression, and PS/2 mode seems to work fine
for the time being - revert this for now. We'll have to do a more
thorough investigation on this.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20191119234534.10725-1-lyude@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>