Add firmware command processing code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add midlayer interface code for Mellanox HCA driver.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a low-level driver for Mellanox MT23108 and MT25208 HCAs.  The
MT25208 is only fully supported when in MT23108 compatibility mode;
only the very beginnings of support for native MT25208 mode (required
for HCAs without local memory) is present.

(As a side note, I believe this driver would be the first in-tree
consumer of the PCI MSI/MSI-X API)
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for sending queries to the SA (Subnet Administration).  In
particular the PathRecord and MCMember (multicast group member) used
by the IP-over-InfiniBand driver are implemented.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer SMI (Subnet Management Interface) code.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add MAD layer private implementation headers.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add support for handling InfiniBand MADs (management datagrams),
including sending and receiving MADs as well as passing MADs on to
local agents.

This is required for an SM (subnet manager) to discover and configure
the host, since the SM's query MADs must be passed to the local SMA
(subnet management agent).  In addition, this support is used by upper
level protocols to send queries to and receive responses from the SM.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for handling InfiniBand MADs (management
datagrams), including sending and receiving MADs as well as passing
MADs on to local agents.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the appropriate lines to drivers/Kconfig and drivers/Makefile so
that the kernel configuration and build systems know about drivers/infiniband.
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add implementation of core InfiniBand support.  This can be thought of
as a midlayer that provides an abstraction between low-level hardware
drivers and upper level protocols (such as IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add public headers for core InfiniBand support.  This can be thought
of as a midlayer that provides an abstraction between low-level
hardware drivers and upper level protocols (such as
IP-over-InfiniBand).
Signed-off-by: Roland Dreier <roland@topspin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Originally submitted by Mike Waychison <Michael.Waychison@sun.com> in
August but apparently lost.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

SCSI ioctls can ask for a lot of memory and fail. We don't need to vomit
in the log file for this case. Again taken from the Red Hat minor
patches applied for FC3.

Original-patch: Arjan van de Ven <arjanv@redhat.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Paul Laufer informed the list that he had changed address and his change
of address had been ignored so CREDITS was still wrong although other
files had been updated.

Fix this.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Red Hat got some confused customers due to this message. The confused
user case is when they update the BIOS and all of a sudden we have "no
suitable data" yet we did before. We (Arjan van de Ven) thus changed it
to "No new microcode" which is much much clearer.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Add some more funky AC97 knowledge to the intel8x0 driver. These come
from Red Hat and its partners and are included in our shipping code.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into pobox.com:/garz/repo/net-drivers-2.6

into nuts.davemloft.net:/disk1/BK/net-2.6

Merry Christmas everyone. Ho ho ho!

rth tells me that some versions of gcc may end up using the
SSE registers for data movement when you do that.

Use "-march=i686 -mtune=xxxx" instead.

(We do the same thing for march=pentium2/4 too, just for
consistency).

evdev, joydev, mousedev, tsdev - remove class device and devfs entry when
hardware driver disconnects instead of waiting for the last user to drop off. 
This way hardware drivers can be unloaded at any time.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds missing lock_kernel()/unlock_kernel() pair in
reiserfs_get_dentry
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

mm/rmap.c contains an open-coded reference to swap_token_default_timeout
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CFQ v2 has some spare queue logic that was never enabled.  It has an SMP
deadlock because it attempts to regrab the queue lock in the exit path, so
kill the spare queue stuff completely for 2.6.10.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

switch_uid() doesn't care about tasklist_lock, so do it outside
the lock and avoid a subtle (and very very unlikely to trigger)
AB-BA deadlock.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes a build failure with gcc-3.4.1, where we use some functions
before we define them inline. 

The simple way to fix those is to simply un-inline the functions in
question. Since they are somewhat large that's what I did.

An alternative would be to rework the ordering of the file so the
functions are defined before their first use.
Signed-off-by: Jesper juhl <juhl-lkml@dif.dk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into oss.sgi.com:/oss4/bitkeeper/xfs-linux-2.6

agp=off disabled the agpgart driver, but not the chipset specific drivers,
which still did their init routines. Chaos ensued.
Signed-off-by: Dave Jones <davej@redhat.com>

From: Peer.Chen@uli.com.tw
Signed-off-by: Dave Jones <davej@redhat.com>

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Remove ATA_FLAG_SATA_RESET.  See comment in code and
http://bugme.osdl.org/show_bug.cgi?id=3352 for more details.

This problem needs more investigation.  Removing the flag
appears to fix the problems in the field, so it's the best
temporary solution.

I missed this in the previous usb_kill_urb() cleanup.  Thanks to
Pat Mochel for reporting this.
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is the patch to fix the case when snd_padding is not zero, updated
according to Duncan's comments.  Also it changes the driver name to reflect
its generic nature.
Signed-off-by: Roman Kagan <rkagan@mail.ru>
Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Moxa have released several driver updates now including support up to
2.6.8 but don't themselves feel its worth the effort of doing a cleaned
up merge for the base kernel.  So I pulled their latest driver release
(1.8) and removed all the macro gunge that makes it build on
2.2.0->2.6.8.  I then fixed it to run on 2.6.9/10 and fixed a bug in the
break handling.

It still doesn't do PCI hotplug but I don't have any PCI moxa cards to
really tackle that particular case. 

I've also merged Adriank Bunk's two 'could be static' changes into this
diff set.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix suggested by Benjamin Herrenschmidt <benh@kernel.crashing.org>

On architectures like PPC, char is handled as "unsigned char", thus the
pcm_format_data table entries with -1 give a positive 255.  This results
in Oops with OSS-emulation on such architectures.

The patch simply adds the right signed/unsigned prefix to fix this problem.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Spotted by MASAO TAKAHASHI
Signed-off-by: Dave Jones <davej@redhat.com>