- 03 Oct, 2018 9 commits
-
-
Robert Shearman authored
It is useful to be able to use the same socket for listening in a specific VRF, as for sending multicast packets out of a specific interface. However, the bound device on the socket currently takes precedence and results in the packets not being sent. Relax the condition on overriding the output interface to use for sending packets out of UDP, raw and ping sockets to allow multicast packets to be sent using the specified multicast interface. Signed-off-by:
Robert Shearman <rshearma@vyatta.att-mail.com> Signed-off-by:
Mike Manning <mmanning@vyatta.att-mail.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Commit 13cefad2 ("net: bridge: convert and rename mcast disabled") converted the 'multicast_disabled' field to an option bit named 'BROPT_MULTICAST_ENABLED'. While the old field was implicitly initialized to 0, the new field is not initialized, resulting in the bridge defaulting to multicast disabled state and breaking existing applications. Fix this by explicitly initializing the option. Fixes: 13cefad2 ("net: bridge: convert and rename mcast disabled") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Acked-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by:
-
David S. Miller authored
Ioana Radulescu says: ==================== dpaa2-eth: Add support for Rx flow classification The Management Complex (MC) firmware initially allowed the configuration of a single key to be used both for Rx flow hashing and flow classification. This prevented us from supporting Rx flow classification independently of the hash key configuration. Newer firmware versions expose separate commands for configuring the two types of keys, so we can use them to introduce Rx classification support. For frames that don't match any classification rule, we fall back to statistical distribution based on the current hash key. The first patch in this set updates the Rx hashing code to use the new firmware API for key config. Subsequent patches introduce the firmware API for configuring the classification and actual support for adding and deleting rules via ethtool. ==================== Signed-off-by: -
Ioana Radulescu authored
Add support for inserting and deleting Rx flow classification rules through ethtool. We support classification based on some header fields for flow-types ether, ip4, tcp4, udp4 and sctp4. Rx queues are core affine, so the action argument effectively selects on which cpu the matching frame will be processed. Discarding the frame is also supported. Signed-off-by:
Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by:
-
Ioana Radulescu authored
For firmware versions that support it, configure an Rx flow classification key at probe time. Hardware expects all rules in the classification table to share the same key. So we setup a key containing all supported fields at driver init and when a user adds classification rules through ethtool, we will just mask out the unused header fields. Since the key composition process is the same for flow classification and hashing, reuse existing code where possible. Signed-off-by:
-
Ioana Radulescu authored
Since the array of supported header fields will be used for Rx flow classification as well, rename it from "hash_fields" to the more inclusive "dist_fields". Signed-off-by:
-
Ioana Radulescu authored
The Management Complex (MC) firmware initially allowed the configuration of a single key to be used both for Rx flow hashing and flow classification. This prevented us from supporting Rx flow classification through ethtool. Starting with version 10.7.0, the Management Complex(MC) offers a new set of APIs for separate configuration of Rx hashing and classification keys. Update the Rx flow hashing support to use the new API, if available. Signed-off-by:
-
Ben Dooks authored
The driver_info field that is used for describing each of the usb-net drivers using the usbnet.c core all declare their information as const and the usbnet.c itself does not try and modify the struct. It is therefore a good idea to make this const in the usbnet.c structure in case anyone tries to modify it. Signed-off-by:
Ben Dooks <ben-linux@fluff.org> Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Eric Dumazet authored
syzkaller was able to hit the WARN_ON(sock_owned_by_user(sk)); in tcp_close() While a socket is being closed, it is very possible other threads find it in rtnetlink dump. tcp_get_info() will acquire the socket lock for a short amount of time (slow = lock_sock_fast(sk)/unlock_sock_fast(sk, slow);), enough to trigger the warning. Fixes: 67db3e4b ("tcp: no longer hold ehash lock while calling tcp_get_info()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
- 02 Oct, 2018 31 commits
-
-
Maciej Żenczykowski authored
Signed-off-by:
Maciej Żenczykowski <maze@google.com> Reviewed-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
Maciej Żenczykowski authored
(the parameter in question is mark) Signed-off-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
Maciej Żenczykowski authored
Signed-off-by:
-
Maciej Żenczykowski authored
(allows for better compiler optimization) Signed-off-by:
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2018-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.20 First set of new features for 4.20. mt76 driver is going through major refactoring and that's why there are so many mt76 patches. iwlwifi is also under heavy development and smaller changes to other drivers. Also wireless-drivers was merged to fix a conflict between the two trees. Major changes: ath10k * limit available channels via DT ieee80211-freq-limit wil6210 * add 802.11r Fast Roaming support for AP and station modes * add support for channel 4 iwlwifi * new FW API handling * some improvements in the PCI recovery mechanism * enable a new scanning feature; * continued work on HE (mostly radiotap) * TKIP implementation in new devices * work continues for new 22560 hardware mt76 * add support for Alfa AWUS036ACM * lots of refactoring to make it easier to add new hardware support * prepare for adding mt76x0e (pci-e variant) support * add CONFIG_MT76x0E kconfig symbol brcmfmac * add support CYW89342 mini-PCIe device * add 4-way handshake offload detection for FT-802.1X * enable NL80211_EXT_FEATURE_CQM_RSSI_LIST * fix for proper support of 160MHz bandwidth rtl8xxxu * add rtl8188ctv support ==================== Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2018-10-02 This series contains updates to ice driver only. Anirudh expands the use of VSI handles across the rest of the driver, which includes refactoring the code to correctly use VSI handles. After a reset, ensure that all configurations for a VSI get re-applied before moving on to rebuilding the next VSI. Dave fixed the driver to check the current link state after reset to ensure that the correct link state of a port is reported. Fixed an issue where if the driver is unloaded when traffic is in progress, errors are generated. Preethi breaks up the IRQ tracker into a software and hardware IRQ tracker, where the software IRQ tracker tracks only the PF's IRQ requests and does not play any role in the VF initialization. The hardware IRQ tracker represents the device's interrupt space and will be looked up to see if the device has run our of interrupts when a interrupt has to be allocated in the device for either PF or VF. Md Fahad adds support for enabling/disabling RSS via ethtool. Brett aligns the ice_reset_req enum values to the values that the hardware understands. Also added initial support for dynamic interrupt moderation in the ice driver. ==================== Signed-off-by: -
David S. Miller authored
Sudarsana Reddy Kalluru says: ==================== qed*: Driver support for 20G link speed. The patch series adds driver support for configuring/reading the 20G link speed. Please consider applying this to "net-next". ==================== Signed-off-by: -
Sudarsana Reddy Kalluru authored
Add driver support for reading/configuring the 20G link speed via ethtool. Signed-off-by:
Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by:
Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by:
-
Sudarsana Reddy Kalluru authored
Add driver support for configuring/reading the 20G link speed. Signed-off-by:
-
Gustavo A. R. Silva authored
Replace "fallthru" with a proper "fall through" annotation. This fix is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Paolo Abeni authored
This helper is unused since commit 988cf74d ("inet: Stop generating UFO packets.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Dave Ertman authored
If the driver is unloaded when traffic is in progress, errors are generated. Fix this by releasing qvectors and NAPI handler on remove. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
Currently there is no support for dynamic interrupt moderation. This patch adds some initial code to support this. The following changes were made: 1. Currently we are using multiple members to store the interrupt granularity (itr_gran_25/50/100/200). This is not necessary because we can query the device to determine what the interrupt granularity should be set to, done by a new function ice_get_itr_intrl_gran. 2. Added intrl to ice_q_vector structure to support interrupt rate limiting. 3. Added the function ice_intrl_usecs_to_reg for converting to a value in usecs that the device understands. 4. Added call to write to the GLINT_RATE register. Disable intrl by default for now. 5. Changed rx/tx_itr_setting to itr_setting because having both seems redundant because a ring is either Tx or Rx. 6. Initialize itr_setting for both Tx/Rx rings in ice_vsi_alloc_rings() Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Signed-off-by:
-
Brett Creeley authored
Currently the ice_reset_req enum values have to be translated into a different set of values that the hardware understands for the same reset types. Avoid this translation by aligning ice_reset_req enum values to the ones that the hardware understands. Also add and else if block to check for ICE_RESET_EMPR and put a dev_dbg message in the else case. Signed-off-by:
-
Md Fahad Iqbal Polash authored
This patch implements ethtool hook for enabling/disabling RSS. While disabling RSS, the LUT should be cleared. And the LUT should be reconfigured while enabling RSS. Signed-off-by:
Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by:
-
Preethi Banala authored
For the PF driver, when mapping interrupts to queues, we need to request IRQs from the kernel and we also have to allocate interrupts from the device. Similarly, when the VF driver (iavf.ko) initializes, it requests the kernel IRQs that it needs but it can't directly allocate interrupts in the device. Instead, it sends a mailbox message to the ice driver, which then allocates interrupts in the device on the VF driver's behalf. Currently both these cases end up having to reserve entries in pf->irq_tracker but irq_tracker itself is sized based on how many vectors the PF driver needs. Under the right circumstances, the VF driver can fail to get entries in irq_tracker, which will result in the VF driver failing probe. To fix this, sw_irq_tracker and hw_irq_tracker are introduced. The sw_irq_tracker tracks only the PF's IRQ request and doesn't play any role in VF init. hw_irq_tracker represents the device's interrupt space. When interrupts have to be allocated in the device for either PF or VF, hw_irq_tracker will be looked up to see if the device has run out of interrupts. Signed-off-by:
Preethi Banala <preethi.banala@intel.com> Signed-off-by:
-
Dave Ertman authored
We are currently replaying the link state of a port after a reset, but it is possible that the link state of a port can change during the reset process. So check for the current link state of a port during the rebuild process of a reset. Signed-off-by:
-
Anirudh Venkataramanan authored
Currently, switch filters get replayed after reset. In addition to filters, other VSI attributes (like RSS configuration, Tx scheduler configuration, etc.) also need to be replayed after reset. Thus, instead of replaying based on functional blocks (i.e. replay all filters for all VSIs, followed by RSS configuration replay for all VSIs, and so on), it makes more sense to have the replay centered around a VSI. In other words, replay all configurations for a VSI before moving on to rebuilding the next VSI. To that effect, this patch introduces a VSI replay framework in a new function ice_vsi_replay_all. Currently it only replays switch filters, but it will be expanded in the future to replay additional VSI attributes. Signed-off-by:
-
Anirudh Venkataramanan authored
This patch is a continuation of the previous patch where VSI handles are used instead of VSI numbers. Signed-off-by:
-
Anirudh Venkataramanan authored
A VSI handle is just a number the driver maintains to uniquely identify a VSI. A VSI handle is backed by a VSI number in the hardware. When interacting when the hardware, VSI handles are converted into VSI numbers. In commit 0f9d5027 ("ice: Refactor VSI allocation, deletion and rebuild flow"), VSI handles were introduced but it was used only when creating and deleting VSIs. This patch is part one of two patches that expands the use of VSI handles across the rest of the driver. Also in this patch, certain parts of the code had to be refactored to correctly use VSI handles. Signed-off-by:
-
David S. Miller authored
Thomas Falcon says: ==================== ibmvnic: Implement driver-defined queue limits In this patch series, update the ibmvnic driver to use driver-defined queue limits instead of limits imposed by the Virtual I/O server management partition. For some deviced, initial max queue size and amount limits, despite their definition, can actually be exceeded if the client driver requests it. With this in mind, define a private ethtool flag that toggles the use of driver-defined limits. These limits are currently more than what supported hardware will likely allow, so the driver will attempt to get as close as possible to the user request but may not fully succeed. ==================== Signed-off-by: -
Thomas Falcon authored
When choosing channel amounts and ring sizes, the maximums in the ibmvnic driver are defined by the virtual i/o server management partition. Even though they are defined as maximums, the client driver may in fact successfully request resources that exceed these limits, which are mostly dependent on a user's hardware With this in mind, provide an ethtool flag that when enabled will allow the user to request resources limited by driver-defined maximums instead of limits defined by the management partition. The driver will try to honor the user's request but may not allowed by the management partition. In this case, the driver requests as close as it can get to the desired amount until it succeeds. Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Thomas Falcon authored
Introduce driver-defined maximums for queue ring sizes. Devices available for IBM vNIC today will likely not allow this amount, but this should give us some leeway for future devices that may support larger ring sizes. Signed-off-by:
-
Thomas Falcon authored
Increase queue size limit to 16. Devices available for IBM vNIC today will not allow this amount, but this should give us some leeway for future devices that may support more RX or TX queues. Signed-off-by:
-
Rob Herring authored
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Andrew Lunn <andrew@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eric Dumazet authored
In the recent TCP/EDT patch series, I switched TCP and sch_fq clocks from MONOTONIC to TAI, in order to meet the choice done earlier for sch_etf packet scheduler. But sure enough, this broke some setups were the TAI clock jumps forward (by almost 50 year...), as reported by Leonard Crestez. If we want to converge later, we'll probably need to add an skb field to differentiate the clock bases, or a socket option. In the meantime, an UDP application will need to use CLOCK_MONOTONIC base for its SCM_TXTIME timestamps if using fq packet scheduler. Fixes: 72b0094f ("tcp: switch tcp_clock_ns() to CLOCK_TAI base") Fixes: 142537e4 ("net_sched: sch_fq: switch to CLOCK_TAI") Fixes: fd2bca2a ("tcp: switch internal pacing timer to CLOCK_TAI") Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Tested-by:
-
