- 09 Feb, 2014 40 commits
-
-
Markus Pargmann authored
uart1 is not used on SOM. It is passed directly to the rdk board. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Markus Pargmann authored
Add pinctrl nodes and properties for phyCARD-S device nodes. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Markus Pargmann authored
This patch adds a iomux node for imx27 pinctrl driver. The gpio registers are embedded in the iomux memory area. So this patch moves them into the iomux node for a better hardware description. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Marek Vasut authored
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Marek Vasut authored
The AHCI-IMX driver now supports i.MX53 as well. Add DT node. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Richard Zhu <r65037@freescale.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linux-IDE <linux-ide@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Alexander Shiyan authored
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Alexander Shiyan authored
usbphy0 is not a part of AIPS1, so move this node under root. Additionally this patch removes useless "status" property. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Maxime Ripard authored
This USB port is only used as peripheral. Set it accordingly in its DT node. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Maxime Ripard authored
The Crystalfontz CFA-10049 has 3 Nuvoton NAU7802 ADCs, plugged behing a GPIO-controlled I2C muxer because these ADCs don't have a configurable address. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Marek Vasut authored
Add USB support for M53EVK. The configuration is such that USB Host1 port is used as Host and the USB OTG port is used as Peripheral thus far. Once OTG is properly fixed, the OTG will be further adjusted. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Marek Vasut authored
Remove the PWM backlight pin from the hog pins list, so it doesn't collide with the PWM pin group. Moreover, add dummy regulator for the backlight so that the backlight driver probes correctly. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Marek Vasut authored
Use the DISP1 pinmux on M53EVK for the LCD, not the LVDS. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Lucas Stach authored
For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Lucas Stach authored
For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Lucas Stach authored
For better readability and no need to look up numbers in the documentation anymore. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Markus Pargmann authored
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Gwenhael Goavec-Merou authored
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Alexander Shiyan authored
Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Alexander Shiyan authored
This patch adds dummy clock for AUDMUX. This change avoids useless debug message "cannot get clock" during driver initialization. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Alexander Shiyan authored
This patch updates i.MX51 CPU node: - Alias for CPU is added to allow using this node in the parent DTS files. - Removed useless "clock_names" property. - "clock-latency" value increased to safe using with 32 kHz OSC. - Defined operating points voltages and "voltage tolerance" properties. Values are safe for both commercial and industrial CPU variants. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Michael Heimpold authored
Signed-off-by: Michael Heimpold <mhei@heimpold.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
The device tree specification recommends that generic name should be used for nodes. So instead of naming those fixed regulator nodes arbitrarily, let's use the generic name 'regulator@num' for those nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
To align with others on fixed regulators bindings, it adds node 'regulators' as the container and move all regulator-fixed nodes into there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Fugang Duan <B38611@freescale.com>
-
Shawn Guo authored
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Shawn Guo authored
Currently, all pinctrl setting nodes are defined in <soc>.dtsi, so that boards that share the same pinctrl setting do not have to define it time and time again in <board>.dts. However, along with the devices and use cases being added continuously, the pinctrl setting nodes under iomuxc becomes more than expected. This bloats device tree blob for particular board unnecessarily since only a small subset of those pinctrl setting nodes will be used by the board. It impacts not only the DTB file size but also the run-time device tree lookup efficiency. The patch moves all the pinctrl data into individual boards as needed. With the changes, the pinctrl setting nodes becomes local to particular board, and it makes no sense to continue numbering the setting for given peripheral. Thus, all the pinctrl phandler name gets updated to have only peripheral name in there. Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Rostislav Lisovy authored
Supported peripherals: Audio -- headphone output, LEDs, Buttons (using keyboard controller), SD-card. Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Rostislav Lisovy authored
Enable uart1, ecspi1, i2c1, FEC and PMIC Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Rostislav Lisovy authored
Signed-off-by: Rostislav Lisovy <lisovy@gmail.com> Acked-by: Kumar Gala <galak@codeaurora.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Greg Ungerer authored
Add device tree support for the Freescale IMX50EVk board based around the IMX50 SoC. Supports UART, SPI flash, FEC ethernet and USB on this board. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Greg Ungerer authored
Create device tree source for the Freescale IMX50 SoC. This was based on the IMX53 source with changes made as necessary. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Greg Ungerer authored
Add device tree pin function definitions for the Freescale IMX50 SoC. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
The following devices/functionalities were added: * Main and secondary UARTs. * i2c and the pcf8563 device. * Ethernet. * NAND. * The BP1 button. * The LED. * Watchdog * SD. Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Denis Carikli authored
Trivial patch to add Eukréa Electromatique to the list of devicetree vendor prefixes. Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: devicetree@vger.kernel.org Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-
Aida Mynzhasova authored
Add auart2 pins configuration on its main pads Signed-off-by: Aida Mynzhasova <aida.mynzhasova@skitlab.ru> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
-