- 30 Sep, 2015 40 commits
-
-
Jani Nikula authored
It's more useful to limp on than bring the kernel down. Hitting this is a more likely event with BXT DSI, although care should be taken not to call the function for DSI. Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
Ville Syrjälä authored
Replace the use of mem_freq/4 with czclk_freq in the vlv c0 residency calculations. Also deal with VLV_COUNT_RANGE_HIGH which affects all RCx residency counters. We have just enough bits to do this without intermediate divisions. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Ville Syrjälä authored
We have the czclk frequency in dev_priv now, so let's just use it when converting the rc6 counters to milliseconds. This eliminates a bunch of hairy code that essentially tries to extract the czclk frequency using yet another method. v2: Fix typos in commit message (Imre) Reviewed-by:
-
Ville Syrjälä authored
As with the cdclk, read out czclk from CCK as well. This gives us the real current value and avoids having to decode fuses and whatnot. Also store it in kHz under dev_priv like we do for cdlck since it's not just an rps related clock, and having it in kHz is more standard/convenient for some things. Imre also pointed out that we currently fail to read czclk on VLV, which means the PFI credit programming isn't working as expected. Signed-off-by:
-
Vandana Kannan authored
Rename the DISPLAY_TRUNK_* and DISPLAY_FREQUENCY_* bits to CCK_... instead of DISPLAY_... to make it clear they apply to all CCK clock control registers. Suggested by Ville. Signed-off-by:
Vandana Kannan <vandana.kannan@intel.com> Reviewed-by:
-
Rasmus Villemoes authored
->stolen->start has type u64 aka unsigned long long; relying on the difference (effectively cast to int) for sorting is wrong. It wouldn't be a problem in practice if the values compared are always within INT_MAX of each other (so that the difference is actually representable in an int), but 440fd528 ("drm/mm: Support 4 GiB and larger ranges") strongly suggests that's not the case. Note: atm we don't support more than about 1G of stolen, so this is impossible currenlty. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> [danvet: Add note that this is impossible currently.] Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Arun Siluvery authored
WA in this function should be ordered based on register address. The following order is suggested (Ville), instpm mi_mode row chicken half slice chicken common slice chicken hdc chicken cache_mode_0 cache_mode_1 gt_mode Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Arun Siluvery authored
Dropping it because it is for pre-production stepping, also removed bit definition in i915_reg.h as it is not used anywhere else. Signed-off-by:
-
Arun Siluvery authored
Dropping it because it is for pre-production stepping, also removed bit definition in i915_reg as it is not used anywhere else. Signed-off-by:
-
Arun Siluvery authored
Dropping it because it is for pre-production stepping. Signed-off-by:
-
Arun Siluvery authored
Updated WA with the name. Signed-off-by:
-
Arun Siluvery authored
Merge Wa4x4STCOptimizationDisable and WaDisablePartialResolveInVc to save an entry in WA array. Signed-off-by:
-
Arun Siluvery authored
Signed-off-by:
-
Mika Kahola authored
This patch adds information of current and maximum CD clock frequency and pixel clock frequency information on 'i915_debugfs.c'. v2: - combined seperate patches for current CD clock, maximum CD clock and maximum pixel clock - space added between the frequency value and the unit Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Reviewed-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
v2: Deal with _CURABASE too Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Handle the HDMI aspect ratio property the same way in the SDVO code as we handle it in the HDMI code. v2: Remove stray whitespace change Signed-off-by:
-
Ville Syrjälä authored
Make adjusted_mode const whereever we don't have to modify it. This only covers cases when we have a local adjusted_mode variable, and doesn't make any difference for cases where we just dereference pipe_config->adjusted_mode. Signed-off-by:
-
Ville Syrjälä authored
We shouldn't frob adjusted_mode after .compute_config(), so move the infoframe aspect ratio setup to .compute_config() from intel_hdmi_set_avi_infoframe(). Signed-off-by:
-
Ville Syrjälä authored
The adjustead_mode crtc_ timings are what we will program into the hardware, so it's those timings we should be looking practically everywhere. The normal and crtc_ timings should differ only when stere doubling is used. In that case the normal timings are the orignal non-doubled timigns, and crtc_ timings are the doubled timings used by the hardware. The only case where we continue to look at the normal timings is when we pass the adjusted_mode to drm_match_{cea,hdmi}_mode() to find the VIC. drm_edid keeps the modes aronund in the non-double form only, so it needs the non-double timings to match against. Done with sed 's/adjusted_mode->\([vhVH]\)/adjusted_mode->crtc_\1/g' 's/adjusted_mode->clock/adjusted_mode->crtc_clock/g' with a manual s/VDisplay/vdisplay/ within the comment in intel_dvo.c v2: Update due to intel_dsi.c changes Reviewed-by: -
Ville Syrjälä authored
Rename the function argument to 'adjusted_mode' whenever the function only ever gets passed the adjusted_mode. v2: Update due to intel_dsi.c changes Signed-off-by:
-
Paulo Zanoni authored
Make the giant function a little less giant. Signed-off-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> [danvet: Add pipe_ prefix as suggested by Chris.] Signed-off-by:
-
Paulo Zanoni authored
Make it clear that we're checking whether FBC is supported or not. The fact that the vfunc is not NULL is just a consequence. Another name option would have been fbc_initialized(). Signed-off-by:
-
Paulo Zanoni authored
The spec says we just can't use it. v2: - Add WA name (Ville). - Add a big comment explaining that we still didn't fix the problem where we inherit a framebuffer on the first page (Chris, Ville). Signed-off-by: -
Maarten Lankhorst authored
This fixes the warnings like "plane A assertion failure, should be disabled but not" that on the initial modeset during boot. This can happen if the primary plane is enabled by the firmware, but inheriting it fails because the DMAR is active or for other reasons. Most likely caused by commit 36750f28 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jun 1 12:49:54 2015 +0200 drm/i915: update plane state during init This is the 4.4 version of commit 721a09f7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Tue Sep 15 14:28:54 2015 +0200 drm/i915: Add primary plane to mask if it's visible Reported-by:
Andreas Reis <andreas.reis@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91429Reported-and-tested-by:
Emil Renner Berthing <kernel@esmil.dk> Tested-by:
-
Ville Syrjälä authored
v2: Hide the 945 vs. rest of gen2/3 difference in the macro Signed-off-by:
-
