Skip to content

L
linux
Switch branch/tag
  1. 25 Apr, 2017 1 commit
  3. 24 Apr, 2017 14 commits
  5. 31 Mar, 2017 2 commits
  7. 30 Mar, 2017 1 commit
  9. 27 Mar, 2017 3 commits
    • Heinz Mauelshagen's avatar
      dm raid: add raid4/5/6 journal write-back support via journal_mode option · 6e53636f
      Heinz Mauelshagen authored 
      Commit 63c32ed4 ("dm raid: add raid4/5/6 journaling support") added
journal support to close the raid4/5/6 "write hole" -- in terms of
writethrough caching.

Introduce a "journal_mode" feature and use the new
r5c_journal_mode_set() API to add support for switching the journal
device's cache mode between write-through (the current default) and
write-back.

NOTE: If the journal device is not layered on resilent storage and it
fails, write-through mode will cause the "write hole" to reoccur.  But
if the journal fails while in write-back mode it will cause data loss
for any dirty cache entries unless resilent storage is used for the
journal.
Signed-off-by: default avatarHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      6e53636f
    • Heinz Mauelshagen's avatar
      dm raid: fix table line argument order in status · 4464e36e
      Heinz Mauelshagen authored 
      Commit 3a1c1ef2 ("dm raid: enhance status interface and fixup
takeover/raid0") added new table line arguments and introduced an
ordering flaw.  The sequence of the raid10_copies and raid10_format
raid parameters got reversed which causes lvm2 userspace to fail by
falsely assuming a changed table line.

Sequence those 2 parameters as before so that old lvm2 can function
properly with new kernels by adjusting the table line output as
documented in Documentation/device-mapper/dm-raid.txt.

Also, add missing version 1.10.1 highlight to the documention.

Fixes: 3a1c1ef2 ("dm raid: enhance status interface and fixup takeover/raid0")
Signed-off-by: default avatarHeinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      4464e36e
    • Heinz Mauelshagen's avatar
      md: add raid4/5/6 journal mode switching API · 78e470c2
      Heinz Mauelshagen authored 
      Commit 2ded3703 ("md/r5cache: State machine for raid5-cache write
back mode") added support for "write-back" caching on the raid journal
device.

In order to allow the dm-raid target to switch between the available
"write-through" and "write-back" modes, provide a new
r5c_journal_mode_set() API.

Use the new API in existing r5c_journal_mode_store()
Signed-off-by: default avatarHeinz Mauelshagen <heinzm@redhat.com>
Acked-by: default avatarShaohua Li <shli@fb.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      78e470c2
  11. 24 Mar, 2017 8 commits
    • Mikulas Patocka's avatar
      dm crypt: use shifts instead of sector_div · ff3af92b
      Mikulas Patocka authored 
      sector_div is very slow, so we introduce a variable sector_shift and
use shift instead of sector_div.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      ff3af92b
    • Mikulas Patocka's avatar
      dm integrity: add recovery mode · c2bcb2b7
      Mikulas Patocka authored 
      In recovery mode, we don't:
- replay the journal
- check checksums
- allow writes to the device

This mode can be used as a last resort for data recovery.  The
motivation for recovery mode is that when there is a single error in the
journal, the user should not lose access to the whole device.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      c2bcb2b7
    • Mike Snitzer's avatar
      dm integrity: factor out create_journal() from dm_integrity_ctr() · 1aa0efd4
      Mike Snitzer authored 
      Preparation for next commit that makes call to create_journal()
optional.
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      1aa0efd4
    • Milan Broz's avatar
      dm crypt: optionally support larger encryption sector size · 8f0009a2
      Milan Broz authored 
      Add  optional "sector_size"  parameter that specifies encryption sector
size (atomic unit of block device encryption).

Parameter can be in range 512 - 4096 bytes and must be power of two.
For compatibility reasons, the maximal IO must fit into the page limit,
so the limit is set to the minimal page size possible (4096 bytes).

NOTE: this device cannot yet be handled by cryptsetup if this parameter
is set.

IV for the sector is calculated from the 512 bytes sector offset unless
the iv_large_sectors option is used.

Test script using dmsetup:

  DEV="/dev/sdb"
  DEV_SIZE=$(blockdev --getsz $DEV)
  KEY="9c1185a5c5e9fc54612808977ee8f548b2258d31ddadef707ba62c166051b9e3cd0294c27515f2bccee924e8823ca6e124b8fc3167ed478bca702babe4e130ac"
  BLOCK_SIZE=4096

  # dmsetup create test_crypt --table "0 $DEV_SIZE crypt aes-xts-plain64 $KEY 0 $DEV 0 1 sector_size:$BLOCK_SIZE"
  # dmsetup table --showkeys test_crypt
Signed-off-by: default avatarMilan Broz <gmazyland@gmail.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      8f0009a2
    • Milan Broz's avatar
      dm crypt: introduce new format of cipher with "capi:" prefix · 33d2f09f
      Milan Broz authored 
      For the new authenticated encryption we have to support generic composed
modes (combination of encryption algorithm and authenticator) because
this is how the kernel crypto API accesses such algorithms.

To simplify the interface, we accept an algorithm directly in crypto API
format.  The new format is recognised by the "capi:" prefix.  The
dmcrypt internal IV specification is the same as for the old format.

The crypto API cipher specifications format is:
     capi:cipher_api_spec-ivmode[:ivopts]
Examples:
     capi:cbc(aes)-essiv:sha256 (equivalent to old aes-cbc-essiv:sha256)
     capi:xts(aes)-plain64      (equivalent to old aes-xts-plain64)
Examples of authenticated modes:
     capi:gcm(aes)-random
     capi:authenc(hmac(sha256),xts(aes))-random
     capi:rfc7539(chacha20,poly1305)-random

Authenticated modes can only be configured using the new cipher format.
Note that this format allows user to specify arbitrary combinations that
can be insecure. (Policy decision is done in cryptsetup userspace.)

Authenticated encryption algorithms can be of two types, either native
modes (like GCM) that performs both encryption and authentication
internally, or composed modes where user can compose AEAD with separate
specification of encryption algorithm and authenticator.

For composed mode with HMAC (length-preserving encryption mode like an
XTS and HMAC as an authenticator) we have to calculate HMAC digest size
(the separate authentication key is the same size as the HMAC digest).
Introduce crypt_ctr_auth_cipher() to parse the crypto API string to get
HMAC algorithm and retrieve digest size from it.

Also, for HMAC composed mode we need to parse the crypto API string to
get the cipher mode nested in the specification.  For native AEAD mode
(like GCM), we can use crypto_tfm_alg_name() API to get the cipher
specification.

Because the HMAC composed mode is not processed the same as the native
AEAD mode, the CRYPT_MODE_INTEGRITY_HMAC flag is no longer needed and
"hmac" specification for the table integrity argument is removed.
Signed-off-by: default avatarMilan Broz <gmazyland@gmail.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      33d2f09f
    • Milan Broz's avatar
      dm crypt: factor IV constructor out to separate function · e889f97a
      Milan Broz authored 
      No functional change.
Signed-off-by: default avatarMilan Broz <gmazyland@gmail.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      e889f97a
    • Milan Broz's avatar
      dm crypt: add cryptographic data integrity protection (authenticated encryption) · ef43aa38
      Milan Broz authored 
      Allow the use of per-sector metadata, provided by the dm-integrity
module, for integrity protection and persistently stored per-sector
Initialization Vector (IV).  The underlying device must support the
"DM-DIF-EXT-TAG" dm-integrity profile.

The per-bio integrity metadata is allocated by dm-crypt for every bio.

Example of low-level mapping table for various types of use:
 DEV=/dev/sdb
 SIZE=417792

 # Additional HMAC with CBC-ESSIV, key is concatenated encryption key + HMAC key
 SIZE_INT=389952
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 32 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-cbc-essiv:sha256 \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \
 0 /dev/mapper/x 0 1 integrity:32:hmac(sha256)"

 # AEAD (Authenticated Encryption with Additional Data) - GCM with random IVs
 # GCM in kernel uses 96bits IV and we store 128bits auth tag (so 28 bytes metadata space)
 SIZE_INT=393024
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 28 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-gcm-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 0 /dev/mapper/x 0 1 integrity:28:aead"

 # Random IV only for XTS mode (no integrity protection but provides atomic random sector change)
 SIZE_INT=401272
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 16 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 0 /dev/mapper/x 0 1 integrity:16:none"

 # Random IV with XTS + HMAC integrity protection
 SIZE_INT=377656
 dmsetup create x --table "0 $SIZE_INT integrity $DEV 0 48 J 0"
 dmsetup create y --table "0 $SIZE_INT crypt aes-xts-random \
 11ff33c6fb942655efb3e30cf4c0fd95f5ef483afca72166c530ae26151dd83b \
 00112233445566778899aabbccddeeff00112233445566778899aabbccddeeff \
 0 /dev/mapper/x 0 1 integrity:48:hmac(sha256)"

Both AEAD and HMAC protection authenticates not only data but also
sector metadata.

HMAC protection is implemented through autenc wrapper (so it is
processed the same way as an authenticated mode).

In HMAC mode there are two keys (concatenated in dm-crypt mapping
table).  First is the encryption key and the second is the key for
authentication (HMAC).  (It is userspace decision if these keys are
independent or somehow derived.)

The sector request for AEAD/HMAC authenticated encryption looks like this:
 |----- AAD -------|------ DATA -------|-- AUTH TAG --|
 | (authenticated) | (auth+encryption) |              |
 | sector_LE |  IV |  sector in/out    |  tag in/out  |

For writes, the integrity fields are calculated during AEAD encryption
of every sector and stored in bio integrity fields and sent to
underlying dm-integrity target for storage.

For reads, the integrity metadata is verified during AEAD decryption of
every sector (they are filled in by dm-integrity, but the integrity
fields are pre-allocated in dm-crypt).

There is also an experimental support in cryptsetup utility for more
friendly configuration (part of LUKS2 format).

Because the integrity fields are not valid on initial creation, the
device must be "formatted".  This can be done by direct-io writes to the
device (e.g. dd in direct-io mode).  For now, there is available trivial
tool to do this, see: https://github.com/mbroz/dm_int_toolsSigned-off-by: default avatarMilan Broz <gmazyland@gmail.com>
Signed-off-by: default avatarOndrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: default avatarVashek Matyas <matyas@fi.muni.cz>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      ef43aa38
    • Mikulas Patocka's avatar
      dm: add integrity target · 7eada909
      Mikulas Patocka authored 
      The dm-integrity target emulates a block device that has additional
per-sector tags that can be used for storing integrity information.

A general problem with storing integrity tags with every sector is that
writing the sector and the integrity tag must be atomic - i.e. in case of
crash, either both sector and integrity tag or none of them is written.

To guarantee write atomicity the dm-integrity target uses a journal. It
writes sector data and integrity tags into a journal, commits the journal
and then copies the data and integrity tags to their respective location.

The dm-integrity target can be used with the dm-crypt target - in this
situation the dm-crypt target creates the integrity data and passes them
to the dm-integrity target via bio_integrity_payload attached to the bio.
In this mode, the dm-crypt and dm-integrity targets provide authenticated
disk encryption - if the attacker modifies the encrypted device, an I/O
error is returned instead of random data.

The dm-integrity target can also be used as a standalone target, in this
mode it calculates and verifies the integrity tag internally. In this
mode, the dm-integrity target can be used to detect silent data
corruption on the disk or in the I/O path.
Signed-off-by: default avatarMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: default avatarMilan Broz <gmazyland@gmail.com>
Signed-off-by: default avatarMike Snitzer <snitzer@redhat.com>
      7eada909
  13. 07 Mar, 2017 4 commits
  15. 05 Mar, 2017 2 commits
    • Linus Torvalds's avatar
      Linux 4.11-rc1 · c1ae3cfa
      Linus Torvalds authored
      c1ae3cfa
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 8d70eeb8
      Linus Torvalds authored 
      Pull networking fixes from David Miller:

 1) Fix double-free in batman-adv, from Sven Eckelmann.

 2) Fix packet stats for fast-RX path, from Joannes Berg.

 3) Netfilter's ip_route_me_harder() doesn't handle request sockets
    properly, fix from Florian Westphal.

 4) Fix sendmsg deadlock in rxrpc, from David Howells.

 5) Add missing RCU locking to transport hashtable scan, from Xin Long.

 6) Fix potential packet loss in mlxsw driver, from Ido Schimmel.

 7) Fix race in NAPI handling between poll handlers and busy polling,
    from Eric Dumazet.

 8) TX path in vxlan and geneve need proper RCU locking, from Jakub
    Kicinski.

 9) SYN processing in DCCP and TCP need to disable BH, from Eric
    Dumazet.

10) Properly handle net_enable_timestamp() being invoked from IRQ
    context, also from Eric Dumazet.

11) Fix crash on device-tree systems in xgene driver, from Alban Bedel.

12) Do not call sk_free() on a locked socket, from Arnaldo Carvalho de
    Melo.

13) Fix use-after-free in netvsc driver, from Dexuan Cui.

14) Fix max MTU setting in bonding driver, from WANG Cong.

15) xen-netback hash table can be allocated from softirq context, so use
    GFP_ATOMIC. From Anoob Soman.

16) Fix MAC address change bug in bgmac driver, from Hari Vyas.

17) strparser needs to destroy strp_wq on module exit, from WANG Cong.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (69 commits)
  strparser: destroy workqueue on module exit
  sfc: fix IPID endianness in TSOv2
  sfc: avoid max() in array size
  rds: remove unnecessary returned value check
  rxrpc: Fix potential NULL-pointer exception
  nfp: correct DMA direction in XDP DMA sync
  nfp: don't tell FW about the reserved buffer space
  net: ethernet: bgmac: mac address change bug
  net: ethernet: bgmac: init sequence bug
  xen-netback: don't vfree() queues under spinlock
  xen-netback: keep a local pointer for vif in backend_disconnect()
  netfilter: nf_tables: don't call nfnetlink_set_err() if nfnetlink_send() fails
  netfilter: nft_set_rbtree: incorrect assumption on lower interval lookups
  netfilter: nf_conntrack_sip: fix wrong memory initialisation
  can: flexcan: fix typo in comment
  can: usb_8dev: Fix memory leak of priv->cmd_msg_buffer
  can: gs_usb: fix coding style
  can: gs_usb: Don't use stack memory for USB transfers
  ixgbe: Limit use of 2K buffers on architectures with 256B or larger cache lines
  ixgbe: update the rss key on h/w, when ethtool ask for it
  ...
      8d70eeb8
  17. 04 Mar, 2017 5 commits
    • Linus Torvalds's avatar
      Merge tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 2d62e076
      Linus Torvalds authored 
      Pull more KVM updates from Radim Krčmář:
 "Second batch of KVM changes for the 4.11 merge window:

  PPC:
   - correct assumption about ASDR on POWER9
   - fix MMIO emulation on POWER9

  x86:
   - add a simple test for ioperm
   - cleanup TSS (going through KVM tree as the whole undertaking was
     caused by VMX's use of TSS)
   - fix nVMX interrupt delivery
   - fix some performance counters in the guest

  ... and two cleanup patches"

* tag 'kvm-4.11-2' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: nVMX: Fix pending events injection
  x86/kvm/vmx: remove unused variable in segment_base()
  selftests/x86: Add a basic selftest for ioperm
  x86/asm: Tidy up TSS limit code
  kvm: convert kvm.users_count from atomic_t to refcount_t
  KVM: x86: never specify a sample period for virtualized in_tx_cp counters
  KVM: PPC: Book3S HV: Don't use ASDR for real-mode HPT faults on POWER9
  KVM: PPC: Book3S HV: Fix software walk of guest process page tables
      2d62e076
    • Linus Torvalds's avatar
      Merge tag 'docs-4.11-fixes' of git://git.lwn.net/linux · be834aaf
      Linus Torvalds authored 
      Pull documentation fixes from Jonathan Corbet:
 "A few fixes for the docs tree, including one for a 4.11 build
  regression"

* tag 'docs-4.11-fixes' of git://git.lwn.net/linux:
  Documentation/sphinx: fix primary_domain configuration
  docs: Fix htmldocs build failure
  doc/ko_KR/memory-barriers: Update control-dependencies section
  pcieaer doc: update the link
  Documentation: Update path to sysrq.txt
      be834aaf
    • Linus Torvalds's avatar
      Merge tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging · 91aff98b
      Linus Torvalds authored 
      Pull staging/IIO driver fixes from Greg KH:
 "Here are a few small staging and IIO driver fixes for issues that
  showed up after the big set if changes you merged last week.

  Nothing major, just small bugs resolved in some IIO drivers, a lustre
  allocation fix, and some RaspberryPi driver fixes for reported
  problems, as well as a MAINTAINERS entry update.

  All of these have been in linux-next for a week with no reported
  issues"

* tag 'staging-4.11-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fsl-mc: fix warning in DT ranges parser
  MAINTAINERS: Remove Noralf Trønnes as fbtft maintainer
  staging: vchiq_2835_arm: Make cache-line-size a required DT property
  staging: bcm2835/mmal-vchiq: unlock on error in buffer_from_host()
  staging/lustre/lnet: Fix allocation size for sv_cpt_data
  iio: adc: xilinx: Fix error handling
  iio: 104-quad-8: Fix off-by-one error when addressing flag register
  iio: adc: handle unknow of_device_id data
      91aff98b
    • Linus Torvalds's avatar
      Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 · 33a8b3e9
      Linus Torvalds authored 
      Pull crypto fixes from Herbert Xu:

 - vmalloc stack regression in CCM

 - Build problem in CRC32 on ARM

 - Memory leak in cavium

 - Missing Kconfig dependencies in atmel and mediatek

 - XTS Regression on some platforms (s390 and ppc)

 - Memory overrun in CCM test vector

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: vmx - Use skcipher for xts fallback
  crypto: vmx - Use skcipher for cbc fallback
  crypto: testmgr - Pad aes_ccm_enc_tv_template vector
  crypto: arm/crc32 - add build time test for CRC instruction support
  crypto: arm/crc32 - fix build error with outdated binutils
  crypto: ccm - move cbcmac input off the stack
  crypto: xts - Propagate NEED_FALLBACK bit
  crypto: api - Add crypto_requires_off helper
  crypto: atmel - CRYPTO_DEV_MEDIATEK should depend on HAS_DMA
  crypto: atmel - CRYPTO_DEV_ATMEL_TDES and CRYPTO_DEV_ATMEL_SHA should depend on HAS_DMA
  crypto: cavium - fix leak on curr if curr->head fails to be allocated
  crypto: cavium - Fix couple of static checker errors
      33a8b3e9
    • Linus Torvalds's avatar
      Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 0710f3ff
      Linus Torvalds authored 
      Pull misc final vfs updates from Al Viro:
 "A few unrelated patches that got beating in -next.

  Everything else will have to go into the next window ;-/"

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  hfs: fix hfs_readdir()
  selftest for default_file_splice_read() infoleak
  9p: constify ->d_name handling
      0710f3ff
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7