- 01 Dec, 2016 2 commits
-
-
Lucas Stach authored
ASSR is an optional feature, so it's a valid operating condition for the display to reject ASSR enable. Demote the warning to the debug level. Acked-by:
Philipp Zabel <p.zabel@pengutronix.de> Acked-by:
Andrey Gusakov <andrey.gusakov@cogentembedded.com> Signed-off-by:
Lucas Stach <l.stach@pengutronix.de> Signed-off-by:
Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161130114810.3245-1-l.stach@pengutronix.de
-
Chris Wilson authored
commit 202b52b7 ("drm: Track drm_mm nodes with an interval tree") introduced a requirement that the special drm_mm.head_node was initialised and marked as not being allocated. It is a very special node that has no side but has a hole that represents the drm_mm address space, and holds the list of nodes. Since it is not a real node, it is not part of the node rbtree and we detect this as it being unallocated. This presumed that drm_mm_init() was initialising it to zero. It happens that i915 kzallocs its objects and so it was accidentally setting it, but for generic use we cannot make that assumption. [ 22.981519] general protection fault: 0000 [#1] SMP [ 22.981521] Modules linked in: test_drm_mm(+) ctr ccm arc4 rt2800usb rt2x00usb rt2800lib rt2x00lib crc_ccitt mac80211 cmac rfcomm bnep snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel dcdbas snd_hda_codec x86_pkg_temp_thermal intel_powerclamp btusb snd_hda_core coretemp crct10dif_pclmul cfg80211 btrtl btbcm btintel bluetooth crc32_pclmul ghash_clmulni_intel aesni_intel snd_pcm i2c_hid aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_timer hid_multitouch snd joydev serio_raw lpc_ich mfd_core i2c_designware_platform i2c_designware_core 8250_dw binfmt_misc soundcore acpi_pad nls_iso8859_1 usbhid hid psmouse ahci libahci [last unloaded: test_drm_mm] [ 22.981544] CPU: 1 PID: 2088 Comm: drm_mm Tainted: G W 4.9.0-rc7+ #234 [ 22.981545] Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A07 11/11/2015 [ 22.981546] task: ffff88020c971cc0 task.stack: ffffc90001728000 [ 22.981547] RIP: 0010:[<ffffffff814050f0>] [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981551] RSP: 0018:ffffc9000172ba98 EFLAGS: 00010202 [ 22.981552] RAX: 0f0000c69cf63d80 RBX: ffff88020be00000 RCX: ffff88020be00000 [ 22.981553] RDX: 0000000000000fff RSI: ffffc9000172bc48 RDI: ffffffff810ac4df [ 22.981553] RBP: ffffc9000172bb08 R08: ffffc9000172bc70 R09: 0000000000000fff [ 22.981554] R10: ffffffff810ac4d7 R11: 4dc04d8b4cffffe5 R12: 0000000000001000 [ 22.981555] R13: ffffc9000172bbd0 R14: ffffc9000172bbe0 R15: 0000000002000000 [ 22.981556] FS: 00007f80c9fab740(0000) GS:ffff88021f480000(0000) knlGS:0000000000000000 [ 22.981557] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.981558] CR2: 00007f80c9fd5000 CR3: 000000020c191000 CR4: 00000000003406e0 [ 22.981559] Stack: [ 22.981560] ffffffff81405d09 ffff88020be00000 ffffc9000172bbe0 000000000172bb08 [ 22.981562] ffffffffffffffff 0000000000000000 0000000000000000 0000000000000000 [ 22.981563] 0000000002000000 0000000002000000 ffffffffa02f3000 ffff88020be00000 [ 22.981565] Call Trace: [ 22.981568] [<ffffffff81405d09>] ? drm_mm_insert_node_generic+0x229/0x310 [ 22.981570] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981572] [<ffffffffa02903c1>] __subtest_insert_range.constprop.7+0xd1/0x5b0 [test_drm_mm] [ 22.981575] [<ffffffff81081222>] ? default_wake_function+0x12/0x20 [ 22.981576] [<ffffffff81096905>] ? __wake_up_common+0x55/0x90 [ 22.981578] [<ffffffff81085f42>] ? sched_clock_cpu+0x72/0xa0 [ 22.981581] [<ffffffff811308ad>] ? irq_work_queue+0xd/0x80 [ 22.981582] [<ffffffff810abcc4>] ? wake_up_klogd+0x34/0x40 [ 22.981584] [<ffffffff810ac19d>] ? console_unlock+0x4cd/0x530 [ 22.981585] [<ffffffff810ac4d7>] ? vprintk_emit+0x2d7/0x490 [ 22.981587] [<ffffffff810ac82f>] ? vprintk_default+0x1f/0x30 [ 22.981589] [<ffffffff81146e1c>] ? printk+0x4d/0x4f [ 22.981590] [<ffffffffa02f3000>] ? 0xffffffffa02f3000 [ 22.981592] [<ffffffffa02908b5>] subtest_insert_range+0x15/0x80 [test_drm_mm] [ 22.981594] [<ffffffffa02f3088>] test_drm_mm_init+0x88/0x1000 [test_drm_mm] [ 22.981597] [<ffffffff8100043d>] do_one_initcall+0x3d/0x150 [ 22.981600] [<ffffffff8119dfbf>] ? kfree+0x13f/0x180 [ 22.981602] [<ffffffff811471f2>] do_init_module+0x60/0x1f1 [ 22.981606] [<ffffffff810db878>] load_module+0x2228/0x2790 [ 22.981608] [<ffffffff810d8590>] ? __symbol_put+0x40/0x40 [ 22.981612] [<ffffffff811c52b1>] ? kernel_read+0x41/0x60 [ 22.981614] [<ffffffff810dbfb6>] SYSC_finit_module+0x96/0xd0 [ 22.981617] [<ffffffff810dc00e>] SyS_finit_module+0xe/0x10 [ 22.981620] [<ffffffff816e7aa4>] entry_SYSCALL_64_fastpath+0x17/0x98 [ 22.981622] Code: c7 41 30 00 00 00 00 48 89 e5 48 89 3a 48 c7 c2 20 4e 40 81 e8 b2 a1 f0 ff 5d c3 48 8d 56 78 45 31 d2 48 89 d6 eb 25 48 8b 51 58 <48> 39 50 38 73 04 48 89 50 38 4c 8b 58 28 4c 39 59 48 48 8d 50 [ 22.981651] RIP [<ffffffff814050f0>] drm_mm_interval_tree_add_node+0xa0/0xd0 [ 22.981655] RSP <ffffc9000172ba98> Testcase: igt/drm_mm Fixes: 202b52b7 ("drm: Track drm_mm nodes with an interval tree") Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: dri-devel@lists.freedesktop.org Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: <drm-intel-fixes@lists.freedesktop.org> # v4.9-rc1+ Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20161130205126.31106-1-chris@chris-wilson.co.uk
-
- 29 Nov, 2016 8 commits
-
-
Daniel Vetter authored
Encoders&planes can't be hotplugged, we dont need locking for this since it's all single-threaded driver setup/teardown code. CRTCs already don't grab locks. While at it I noticed that plane's are missing the drm_modeset_lock_fini() call, so add it. Reviewed-by:
Frank Binns <frank.binns@imgtec.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161129094538.9650-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
This isn't part of the code snippet anymore ... Acked-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Chris Wilson authored
Though we only walk the kernel_fb_helper_list inside a panic (or single thread debugging), we still need to protect the list manipulation on creating/removing a framebuffer device in order to prevent list corruption. Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20161129120217.7344-3-chris@chris-wilson.co.uk
-
Chris Wilson authored
drm_fb_helper_probe_connector_modes() is always called before drm_setup_crtcs(), so just move the call into drm_setup_crtcs for a small bit of code compaction. Note that register_framebuffer will do a modeset (when fbcon is enabled) and hence must be moved out of the critical section. A follow-up patch will add new locking for the fb list, hence move all the related registration code together. Signed-off-by:
-
Chris Wilson authored
The fb_helper->connector_count is modified when a new connector is constructed following a hotplug event (e.g. DP-MST). This causes trouble for drm_setup_crtcs() and friends that assume that fb_helper is constant: [ 1250.872997] BUG: KASAN: slab-out-of-bounds in drm_setup_crtcs+0x320/0xf80 at addr ffff88074cdd2608 [ 1250.873020] Write of size 40 by task kworker/u8:3/480 [ 1250.873039] CPU: 2 PID: 480 Comm: kworker/u8:3 Tainted: G U 4.9.0-rc6+ #285 [ 1250.873043] Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 [ 1250.873050] Workqueue: events_unbound async_run_entry_fn [ 1250.873056] ffff88070f9d78f0 ffffffff814b72aa ffff88074e40c5c0 ffff88074cdd2608 [ 1250.873067] ffff88070f9d7918 ffffffff8124ff3c ffff88070f9d79b0 ffff88074cdd2600 [ 1250.873079] ffff88074e40c5c0 ffff88070f9d79a0 ffffffff812501e4 0000000000000005 [ 1250.873090] Call Trace: [ 1250.873099] [<ffffffff814b72aa>] dump_stack+0x67/0x9d [ 1250.873106] [<ffffffff8124ff3c>] kasan_object_err+0x1c/0x70 [ 1250.873113] [<ffffffff812501e4>] kasan_report_error+0x204/0x4f0 [ 1250.873120] [<ffffffff81698df0>] ? drm_dev_printk+0x140/0x140 [ 1250.873127] [<ffffffff81250ac3>] kasan_report+0x53/0x60 [ 1250.873134] [<ffffffff81688b40>] ? drm_setup_crtcs+0x320/0xf80 [ 1250.873142] [<ffffffff8124f18e>] check_memory_region+0x13e/0x1a0 [ 1250.873147] [<ffffffff8124f5f3>] memset+0x23/0x40 [ 1250.873154] [<ffffffff81688b40>] drm_setup_crtcs+0x320/0xf80 [ 1250.873161] [<ffffffff810be7c5>] ? wake_up_q+0x45/0x80 [ 1250.873169] [<ffffffff81b0c180>] ? mutex_lock_nested+0x5a0/0x5a0 [ 1250.873176] [<ffffffff8168a0e6>] drm_fb_helper_initial_config+0x206/0x7a0 [ 1250.873183] [<ffffffff81689ee0>] ? drm_fb_helper_set_par+0x90/0x90 [ 1250.873303] [<ffffffffa0b68690>] ? intel_fbdev_fini+0x140/0x140 [i915] [ 1250.873387] [<ffffffffa0b686b2>] intel_fbdev_initial_config+0x22/0x40 [i915] [ 1250.873391] [<ffffffff810b50ff>] async_run_entry_fn+0x7f/0x270 [ 1250.873394] [<ffffffff810a64b0>] process_one_work+0x3d0/0x960 [ 1250.873398] [<ffffffff810a641d>] ? process_one_work+0x33d/0x960 [ 1250.873401] [<ffffffff810a60e0>] ? max_active_store+0xf0/0xf0 [ 1250.873406] [<ffffffff810f6f9d>] ? do_raw_spin_lock+0x10d/0x1a0 [ 1250.873413] [<ffffffff810a767d>] worker_thread+0x8d/0x840 [ 1250.873419] [<ffffffff810a75f0>] ? create_worker+0x2e0/0x2e0 [ 1250.873426] [<ffffffff810b0454>] kthread+0x194/0x1c0 [ 1250.873432] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873438] [<ffffffff810f095d>] ? trace_hardirqs_on+0xd/0x10 [ 1250.873446] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873453] [<ffffffff810b02c0>] ? kthread_park+0x60/0x60 [ 1250.873457] [<ffffffff81b12277>] ret_from_fork+0x27/0x40 [ 1250.873460] Object at ffff88074cdd2608, in cache kmalloc-32 size: 32 However, when holding the mode_config.lock around the fb_helper, we have to be careful of any callbacks that may reenter the fb_helper and so try to reacquire the mode_config.lock (e.g. register_framebuffer). To avoid the mutex recursion, we have to rearrange the sequence to move the registration into the caller outside of the mode_config.lock. v2: drop the 1; following the lockdep assertion inside the for(;;), I anticipated an error that doesn't happen! Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98826Signed-off-by:
-
Chris Wilson authored
In a couple of places currently, and with the intent to add more, we update a pointer to a framebuffer to hold a new fb reference (evicting the old). Signed-off-by:
-
Srinivas Kandagatla authored
This patch enables the Audio Data and Clock pads to the adv7533 bridge. Without this patch audio can not be played. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
John Stultz authored
This patch adds support to Audio for both adv7511 and adv7533 bridge chips. This patch was originally from [1] by Lars-Peter Clausen <lars@metafoo.de> and was adapted by Archit Taneja <architt@codeaurora.org> and Srinivas Kandagatla <srinivas.kandagatla@linaro.org>. Then I heavily reworked it to use the hdmi-codec driver. And also folded in some audio packet initialization done by Andy Green <andy.green@linaro.org>. So credit to them, but blame to me. [1] https://github.com/analogdevicesinc/linux/blob/xcomm_zynq/drivers/gpu/drm/i2c/adv7511_audio.c Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Andy Green <andy@warmcat.com> Cc: Dave Long <dave.long@linaro.org> Cc: Guodong Xu <guodong.xu@linaro.org> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Mark Brown <broonie@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Jose Abreu <joabreu@synopsys.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: dri-devel@lists.freedesktop.org Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
- 28 Nov, 2016 7 commits
-
-
Ville Syrjälä authored
CEA-861 specifies that the vertical front porch may vary by one or two lines for specific VICs. Up to now we've only considered a mode to match the VIC if it matched the shortest possible vertical front porch length (as that is the variant we store in cea_modes[]). Let's allow our VIC matching to work with the other timings variants as well so that that we'll send out the correct VIC if the variant actually used isn't the one with the shortest vertical front porch. Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Adam Jackson <ajax@redhat.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478177609-16762-2-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Andrzej Hajda <a.hajda@samsung.com>
-
Ville Syrjälä authored
drm_atomic_crtc_needs_modeset() doesn't change the passed in crtc state, so pass it as const. Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Arnd Bergmann authored
The newly added sound driver depends on SND_SOC_HDMI_CODEC, which in turn only makes sense when ASoC is enabled, as shown by this warning: warning: (DRM_MSM && DRM_STI && DRM_MEDIATEK_HDMI && DRM_I2C_NXP_TDA998X && DRM_DW_HDMI_I2S_AUDIO) selects SND_SOC_HDMI_CODEC which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC) Since the audio driver is probably useless without the audio subsystem, adding a dependency here seems the right solution. Fixes: 2761ba6c ("drm: bridge: add DesignWare HDMI I2S audio support") Acked-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Chris Wilson authored
smatch correctly warns: drivers/gpu/drm/drm_fb_helper.c:1960 drm_target_preferred() warn: should '1 << i' be a 64 bit type? drivers/gpu/drm/drm_fb_helper.c:2001 drm_target_preferred() warn: should '1 << i' be a 64 bit type? Signed-off-by:
-
Chris Wilson authored
smatch warns: drivers/gpu/drm/drm_lock.c:188 drm_legacy_lock() warn: variable dereferenced before check 'master->lock.hw_lock' (see line 177) Signed-off-by:
-
Chris Wilson authored
Remove the ugly sparse casts by using the helper u64_to_user_ptr() instead. Signed-off-by:
-
Chris Wilson authored
start is being used as both a macro parameter and as a member of struct drm_mm_node (node->start). This causes a conflict as cpp then tries to replace node->start with the passed in string for "start". Work just fine so long as you also happened to using local variables called start! Fixes: 522e85dd ("drm: Define drm_mm_for_each_node_in_range()") Signed-off-by:
-
- 25 Nov, 2016 4 commits
-
-
Chris Wilson authored
Silences ./include/drm/drm_drv.h:295: warning: Incorrect use of kernel-doc format Signed-off-by:
-
Arnd Bergmann authored
When CONFIG_PM_SLEEP is disabled, we get a harmless warning drm/hisilicon/hibmc/hibmc_drm_drv.c:115:12: error: ‘hibmc_pm_resume’ defined but not used [-Werror=unused-function] drm/hisilicon/hibmc/hibmc_drm_drv.c:97:12: error: ‘hibmc_pm_suspend’ defined but not used [-Werror=unused-function] Marking the functions as __maybe_unused avoids the warning without having to add an #ifdef. Fixes: 5e0df3a0 ("drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver") Signed-off-by:
-
Dan Carpenter authored
The drm_dev_alloc() function returns error pointers. It never returns NULLs. Fixes: 5e0df3a0 ("drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Daniel Vetter authored
Pull in the hibmc driver stuff so I can apply 2 trivial fixups from Dan&Arnd. Signed-off-by:
-
- 24 Nov, 2016 4 commits
-
-
Kuninori Morimoto authored
Current dw-hdmi is supporting sound via AHB bus, but it has I2S audio feature too. This patch adds I2S audio support to dw-hdmi. This HDMI I2S is supported by using ALSA SoC common HDMI encoder driver. Tested-by:
Jose Abreu <joabreu@synopsys.com> Acked-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Chris Wilson authored
Use the color_adjust callback when reserving a node to check if inserting a node into this hole requires any additional space, and so if that space then conflicts with an existing allocation. Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
-
Chris Wilson authored
Some clients would like to iterate over every node within a certain range. Make a nice little macro for them to hide the mixing of the rbtree search and linear walk. v2: Blurb Signed-off-by:
-
Daniel Vetter authored
One of the functions was missing () to make the autolinks work, unfortunately copy-pasted a few times all over. Cc: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
-
- 23 Nov, 2016 1 commit
-
-
Daniel Vetter authored
Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Acked-by:
Jani Nikula <jani.nikula@linux.intel.com> Acked-by:
-
- 22 Nov, 2016 3 commits
-
-
Arnd Bergmann authored
We now pass the device to the debug messages, but on non-x86, this is an invalid pointer in vga_arb_device_init: drivers/gpu/vga/vgaarb.c: In function 'vga_arb_device_init': drivers/gpu/vga/vgaarb.c:1467:4: error: 'dev' may be used uninitialized in this function [-Werror=maybe-uninitialized] This moves the initialization of the dev pointer outside of the architecture #ifdef. Fixes: a75d68f6 ("vgaarb: Use dev_printk() when possible") Signed-off-by:
-
Daniel Vetter authored
I totally butcherd the job on typing the kernel-doc for these, and no one realized. Noticed by Russell. Maarten has a more complete approach to this confusion, by making it more explicit what the new/old state is, instead of this magic switching behaviour. v2: - Liviu pointed out that wait_for_fences is even more magic. Leave that as @state, and document @pre_swap better. - While at it, patch in header for the reference section. - Fix spelling issues Russell noticed. v3: Fix up the @pre_swap note (Liviu): Also s/synchronous/blocking/, since async flip is something else than non-blocking. Cc: Liviu Dudau <liviu.dudau@arm.com> Reported-by:
Russell King - ARM Linux <linux@armlinux.org.uk> Cc: Russell King - ARM Linux <linux@armlinux.org.uk> Fixes: 9f2a7950 ("drm/atomic-helper: nonblocking commit support") Cc: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Cc: Daniel Stone <daniels@collabora.com> Reviewed-by:
Liviu Dudau <liviu.dudau@arm.com> Signed-off-by:
-
Gustavo Padovan authored
Document IN_FENCE_FD and OUT_FENCE_PTR properties. v2: incorporate comments from Daniel Vetter Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> [danvet: s/async/nonblocking/ atomic commits.] Signed-off-by:
-
- 21 Nov, 2016 2 commits
-
-
Liviu Dudau authored
Cleanup the debugfs entries created by commit 6559c901: drm/atomic: add debugfs file to dump out atomic state when the driver's minor gets un-registered. Without it, DRM drivers compiled as modules cannot be rmmod-ed and modprobed again. Tested-by:
Brian Starkey <brian.starkey@arm.com> Signed-off-by:
-
http://github.com/zourongrong/linuxDave Airlie authored
hibmc drm driver for hisilicon. * tag 'drm-hisilicon-next-2016-11-17' of http://github.com/zourongrong/linux: MAINTAINERS: Update HISILICON DRM entries drm/hisilicon/hibmc: Add support for vblank interrupt drm/hisilicon/hibmc: Add support for VDAC drm/hisilicon/hibmc: Add support for display engine drm/hisilicon/hibmc: Add support for frame buffer drm/hisilicon/hibmc: Add video memory management drm/hisilicon/hibmc: Add hisilicon hibmc drm master driver
-
- 18 Nov, 2016 4 commits
-
-
Bjorn Helgaas authored
To avoid userspace-triggerable dmesg spam, downgrade messages in the sysfs write parsing code to debug level. Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Bjorn Helgaas authored
Use dev_printk() when possible. This makes messages more consistent with other device-related messages and, in some cases, adds useful information. This changes messages like this: vgaarb: failed to allocate pci device vgaarb: setting as boot device: PCI:0000:01:00.0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: bridge control possible 0000:01:00.0 to this: pci 0000:01:00.0: vgaarb: failed to allocate VGA arbiter data pci 0000:01:00.0: vgaarb: setting as boot VGA device pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none pci 0000:01:00.0: vgaarb: bridge control possible No functional change intended. Signed-off-by:
-
Gustavo Padovan authored
This reverts commit ecebca79. Do not enable fence callback on poll() when using fence_array causes the fence_array to not signal. For now we will revert the change and enable signaling everytime time poll is called with timeout=0 as well. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Daniel Vetter authored
There's a really big pile of additional connector properties, a lot of them standardized. But they're all for specific outputs (panels, TV, scaling, ...) so I left them out for now since this is enough for a start. I typed this to give Manasi a place to add her new link status property documentation. v2: forgot to git add all the bits (Manasi). v3: Be more epxlicit about integrated tiled panels (Archit) Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Reviewed-by:
Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
- 17 Nov, 2016 5 commits
-
-
Jani Nikula authored
We've overlooked adding DSI panels to the front of the connector list. This seems to be the right thing to do, and I suspect this might fix some issues, although I currently have no evidence to support this. v2: also git add the comment change Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Ville Syrjälä authored
It has been suggested that having per-plane modifiers is making life more difficult for userspace, so let's just retire modifier[1-3] and use modifier[0] to apply to the entire framebuffer. Obviosuly this means that if individual planes need different tiling layouts and whatnot we will need a new modifier for each combination of planes with different tiling layouts. For a bit of extra backwards compatilbilty the kernel will allow non-zero modifier[1+] but it require that they will match modifier[0]. This in case there's existing userspace out there that sets modifier[1+] to something non-zero with planar formats. Mostly a cocci job, with a bit of manual stuff mixed in. @@ struct drm_framebuffer *fb; expression E; @@ - fb->modifier[E] + fb->modifier @@ struct drm_framebuffer fb; expression E; @@ - fb.modifier[E] + fb.modifier Cc: Kristian Høgsberg <hoegsberg@gmail.com> Cc: Ben Widawsky <benjamin.widawsky@intel.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tomeu Vizoso <tomeu@tomeuvizoso.net> Cc: dczaplejewicz@collabora.co.uk Suggested-by:
Kristian Høgsberg <hoegsberg@gmail.com> Acked-by:
Ben Widawsky <ben@bwidawsk.net> Acked-by:
Daniel Stone <daniels@collabora.com> Acked-by:
-
Daniel Vetter authored
Sumit still takes care about dma-buf, but we've merged the trees together since way too much overlap. And Gustavo is also part of the drm-misc team to be able to help out. Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Gustavo Padovan <gustavo@padovan.org> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Chen-Yu Tsai authored
Some dumb VGA DACs are active components which require external power. Add support for specifying a regulator as its power supply. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Daniel Vetter authored
Again something that's in the drm-misc fold. Cc: Archit Taneja <architt@codeaurora.org> Acked-by:
-
