- 16 Oct, 2018 26 commits
-
-
Vitaly Kuznetsov authored
In most common cases VP index of a vcpu matches its vcpu index. Userspace is, however, free to set any mapping it wishes and we need to account for that when we need to find a vCPU with a particular VP index. To keep search algorithms optimal in both cases introduce 'num_mismatched_vp_indexes' counter showing how many vCPUs with mismatching VP index we have. In case the counter is zero we can assume vp_index == vcpu_idx. Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Vitaly Kuznetsov authored
Rename 'hv' to 'hv_vcpu' in kvm_hv_set_msr/kvm_hv_get_msr(); 'hv' is 'reserved' for 'struct kvm_hv' variables across the file. Signed-off-by:
-
Vitaly Kuznetsov authored
We can use 'NULL' to represent 'all cpus' case in kvm_make_vcpus_request_mask() and avoid building vCPU mask with all vCPUs. Suggested-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Vitaly Kuznetsov authored
Hyper-V TLFS (5.0b) states: > Virtual processors are identified by using an index (VP index). The > maximum number of virtual processors per partition supported by the > current implementation of the hypervisor can be obtained through CPUID > leaf 0x40000005. A virtual processor index must be less than the > maximum number of virtual processors per partition. Forbid userspace to set VP_INDEX above KVM_MAX_VCPUS. get_vcpu_by_vpidx() can now be optimized to bail early when supplied vpidx is >= KVM_MAX_VCPUS. Signed-off-by:
-
Paolo Bonzini authored
If kvm_apic_map_get_dest_lapic() finds a disabled LAPIC, it will return with bitmap==0 and (*r == -1) will be returned to userspace. QEMU may then record "KVM: injection failed, MSI lost (Operation not permitted)" in its log, which is quite puzzling. Reported-by:
Peng Hao <penghao122@sina.com.cn> Signed-off-by:
-
Wei Yang authored
Currently, there are two definitions related to huge page, but a little bit far from each other and seems loosely connected: * KVM_NR_PAGE_SIZES defines the number of different size a page could map * PT_MAX_HUGEPAGE_LEVEL means the maximum level of huge page The number of different size a page could map equals the maximum level of huge page, which is implied by current definition. While current implementation may not be kind to readers and further developers: * KVM_NR_PAGE_SIZES looks like a stand alone definition at first sight * in case we need to support more level, two places need to change This patch tries to make these two definition more close, so that reader and developer would feel more comfortable to manipulate. Signed-off-by:
Wei Yang <richard.weiyang@gmail.com> Signed-off-by:
-
Tianyu Lan authored
is_external_interrupt() is not used now and so remove it. Signed-off-by:
Lan Tianyu <Tianyu.Lan@microsoft.com> Signed-off-by:
-
Wei Yang authored
The code tries to pre-allocate *min* number of objects, so it is ok to return 0 when the kvm_mmu_memory_cache meets the requirement. Signed-off-by:
-
Krish Sadhukhan authored
Suggested-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by:
Mark Kanda <mark.kanda@oracle.com> Reviewed-by:
-
Wei Yang authored
On a 64bits machine, struct is naturally aligned with 8 bytes. Since kvm_mmu_page member *unsync* and *role* are less then 4 bytes, we can rearrange the sequence to compace the struct. As the comment shows, *role* and *gfn* are used to key the shadow page. In order to keep the comment valid, this patch moves the *unsync* up and exchange the position of *role* and *gfn*. From /proc/slabinfo, it shows the size of kvm_mmu_page is 8 bytes less and with one more object per slap after applying this patch. # name <active_objs> <num_objs> <objsize> <objperslab> kvm_mmu_page_header 0 0 168 24 kvm_mmu_page_header 0 0 160 25 Signed-off-by: -
Sean Christopherson authored
A VMEnter that VMFails (as opposed to VMExits) does not touch host state beyond registers that are explicitly noted in the VMFail path, e.g. EFLAGS. Host state does not need to be loaded because VMFail is only signaled for consistency checks that occur before the CPU starts to load guest state, i.e. there is no need to restore any state as nothing has been modified. But in the case where a VMFail is detected by hardware and not by KVM (due to deferring consistency checks to hardware), KVM has already loaded some amount of guest state. Luckily, "loaded" only means loaded to KVM's software model, i.e. vmcs01 has not been modified. So, unwind our software model to the pre-VMEntry host state. Not restoring host state in this VMFail path leads to a variety of failures because we end up with stale data in vcpu->arch, e.g. CR0, CR4, EFER, etc... will all be out of sync relative to vmcs01. Any significant delta in the stale data is all but guaranteed to crash L1, e.g. emulation of SMEP, SMAP, UMIP, WP, etc... will be wrong. An alternative to this "soft" reload would be to load host state from vmcs12 as if we triggered a VMExit (as opposed to VMFail), but that is wildly inconsistent with respect to the VMX architecture, e.g. an L1 VMM with separate VMExit and VMFail paths would explode. Note that this approach does not mean KVM is 100% accurate with respect to VMX hardware behavior, even at an architectural level (the exact order of consistency checks is microarchitecture specific). But 100% emulation accuracy isn't the goal (with this patch), rather the goal is to be consistent in the information delivered to L1, e.g. a VMExit should not fall-through VMENTER, and a VMFail should not jump to HOST_RIP. This technically reverts commit "5af41573 (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure)", but retains the core aspects of that patch, just in an open coded form due to the need to pull state from vmcs01 instead of vmcs12. Restoring host state resolves a variety of issues introduced by commit "4f350c6d (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly)", which remedied the incorrect behavior of treating VMFail like VMExit but in doing so neglected to restore arch state that had been modified prior to attempting nested VMEnter. A sample failure that occurs due to stale vcpu.arch state is a fault of some form while emulating an LGDT (due to emulated UMIP) from L1 after a failed VMEntry to L3, in this case when running the KVM unit test test_tpr_threshold_values in L1. L0 also hits a WARN in this case due to a stale arch.cr4.UMIP. L1: BUG: unable to handle kernel paging request at ffffc90000663b9e PGD 276512067 P4D 276512067 PUD 276513067 PMD 274efa067 PTE 8000000271de2163 Oops: 0009 [#1] SMP CPU: 5 PID: 12495 Comm: qemu-system-x86 Tainted: G W 4.18.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:native_load_gdt+0x0/0x10 ... Call Trace: load_fixmap_gdt+0x22/0x30 __vmx_load_host_state+0x10e/0x1c0 [kvm_intel] vmx_switch_vmcs+0x2d/0x50 [kvm_intel] nested_vmx_vmexit+0x222/0x9c0 [kvm_intel] vmx_handle_exit+0x246/0x15a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0x850/0x1830 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x600 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x4f/0x100 entry_SYSCALL_64_after_hwframe+0x44/0xa9 L0: WARNING: CPU: 2 PID: 3529 at arch/x86/kvm/vmx.c:6618 handle_desc+0x28/0x30 [kvm_intel] ... CPU: 2 PID: 3529 Comm: qemu-system-x86 Not tainted 4.17.2-coffee+ #76 Hardware name: Intel Corporation Kabylake Client platform/KBL S RIP: 0010:handle_desc+0x28/0x30 [kvm_intel] ... Call Trace: kvm_arch_vcpu_ioctl_run+0x863/0x1840 [kvm] kvm_vcpu_ioctl+0x3a1/0x5c0 [kvm] do_vfs_ioctl+0x9f/0x5e0 ksys_ioctl+0x66/0x70 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x49/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 5af41573 (KVM: nVMX: Fix mmu context after VMLAUNCH/VMRESUME failure) Fixes: 4f350c6d (kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly) Cc: Jim Mattson <jmattson@google.com> Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmáÅ
™ <rkrcmar@redhat.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Jim Mattson authored
According to volume 3 of the SDM, bits 63:15 and 12:4 of the exit qualification field for debug exceptions are reserved (cleared to 0). However, the SDM is incorrect about bit 16 (corresponding to DR6.RTM). This bit should be set if a debug exception (#DB) or a breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled. Note that this is the opposite of DR6.RTM, which "indicates (when clear) that a debug exception (#DB) or breakpoint exception (#BP) occurred inside an RTM region while advanced debugging of RTM transactional regions was enabled." There is still an issue with stale DR6 bits potentially being misreported for the current debug exception. DR6 should not have been modified before vectoring the #DB exception, and the "new DR6 bits" should be available somewhere, but it was and they aren't. Fixes: b96fb439 ("KVM: nVMX: fixes to nested virt interrupt injection") Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
Andrew Jones <drjones@redhat.com> Signed-off-by:
-
Andrew Jones authored
Let's add the 40 PA-bit versions of the VM modes, that AArch64 should have been using, so we can extend the dirty log test without breaking things. Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Andrew Jones authored
While we're messing with the code for the port and to support guest page sizes that are less than the host page size, we also make some code formatting cleanups and apply sync_global_to_guest(). Signed-off-by:
-
Andrew Jones authored
Rename VM_MODE_FLAT48PG to be more descriptive of its config and add a new config that has the same parameters, except with 64K pages. Signed-off-by:
-
Andrew Jones authored
This code adds VM and VCPU setup code for the VM_MODE_FLAT48PG mode. The VM_MODE_FLAT48PG isn't yet fully supportable, as it defines the guest physical address limit as 52-bits, and KVM currently only supports guests with up to 40-bit physical addresses (see KVM_PHYS_SHIFT). VM_MODE_FLAT48PG will work fine, though, as long as no >= 40-bit physical addresses are used. Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Andrew Jones authored
Tidy up kvm-util code: code/comment formatting, remove unused code, and move x86 specific code out. We also move vcpu_dump() out of common code, because not all arches (AArch64) have KVM_GET_REGS. Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Andrew Jones authored
Rework the guest exit to userspace code to generalize the concept into what it is, a "hypercall to userspace", and provide two implementations of it: the PortIO version currently used, but only useable by x86, and an MMIO version that other architectures (except s390) can use. Signed-off-by:
-
Andrew Jones authored
Guest code may want to call functions that have variable arguments. To do so, we either need to compile with -mno-sse or enable SSE in the VCPUs. As it should be pretty safe to turn on the feature, and -mno-sse would make linking test code with standard libraries difficult, we choose the feature enabling. Signed-off-by:
-
Wanpeng Li authored
In cloud environment, lapic_timer_advance_ns is needed to be tuned for every CPU generations, and every host kernel versions(the kvm-unit-tests/tscdeadline_latency.flat is 5700 cycles for upstream kernel and 9600 cycles for our 3.10 product kernel, both preemption_timer=N, Skylake server). This patch adds the capability to automatically tune lapic_timer_advance_ns step by step, the initial value is 1000ns as 'commit d0659d94 ("KVM: x86: add option to advance tscdeadline hrtimer expiration")' recommended, it will be reduced when it is too early, and increased when it is too late. The guest_tsc and tsc_deadline are hard to equal, so we assume we are done when the delta is within a small scope e.g. 100 cycles. This patch reduces latency (kvm-unit-tests/tscdeadline_latency, busy waits, preemption_timer enabled) from ~2600 cyles to ~1200 cyles on our Skylake server. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Signed-off-by:
-
- 13 Oct, 2018 6 commits
-
-
Liran Alon authored
If L1 uses VPID, it expects TLB to not be flushed on L1<->L2 transitions. However, code currently flushes TLB nonetheless if we didn't allocate a vpid02 for L2. As in this case, vmcs02->vpid == vmcs01->vpid == vmx->vpid. But, if L1 uses EPT, TLB entires populated by L2 are tagged with EPTP02 while TLB entries populated by L1 are tagged with EPTP01. Therefore, we can also avoid TLB flush if L1 uses VPID and EPT. Reviewed-by:
Mihai Carabas <mihai.carabas@oracle.com> Reviewed-by:
Darren Kenny <darren.kenny@oracle.com> Reviewed-by:
Nikita Leshenko <nikita.leshchenko@oracle.com> Signed-off-by:
Liran Alon <liran.alon@oracle.com> Signed-off-by:
-
Liran Alon authored
All VPID12s used on a given L1 vCPU is translated to a single VPID02 (vmx->nested.vpid02 or vmx->vpid). Therefore, on L1->L2 VMEntry, we need to invalidate linear and combined mappings tagged by VPID02 in case L1 uses VPID and vmcs12->vpid was changed since last L1->L2 VMEntry. However, current code invalidates the wrong mappings as it calls __vmx_flush_tlb() with invalidate_gpa parameter set to true which will result in invalidating combined and guest-physical mappings tagged with active EPTP which is EPTP01. Similarly, INVVPID emulation have the exact same issue. Fix both issues by just setting invalidate_gpa parameter to false which will result in invalidating linear and combined mappings tagged with given VPID02 as required. Reviewed-by:
-
Liran Alon authored
In case L0 didn't allocate vmx->nested.vpid02 for L2, vmcs02->vpid is set to vmx->vpid. Consider this case when emulating L1 INVVPID in L0. Reviewed-by:
-
Liran Alon authored
If L1 and L2 share VPID (because L1 don't use VPID or we haven't allocated a vpid02), we need to flush TLB on L1<->L2 transitions. Before this patch, this TLB flushing was done by vmx_flush_tlb(). If L0 use EPT, this will translate into INVEPT(active_eptp); However, if L1 use EPT, in L1->L2 VMEntry, active EPTP is EPTP01 but TLB entries populated by L2 are tagged with EPTP02. Therefore we should delay vmx_flush_tlb() until active_eptp is EPTP02. To achieve this, instead of directly calling vmx_flush_tlb() we request it to be called by KVM_REQ_TLB_FLUSH which is evaluated after KVM_REQ_LOAD_CR3 which sets the active_eptp to EPTP02 as required. Similarly, on L2->L1 VMExit, active EPTP is EPTP02 but TLB entries populated by L1 are tagged with EPTP01 and therefore we should delay vmx_flush_tlb() until active_eptp is EPTP01. Reviewed-by:
-
Sean Christopherson authored
The KVM_GUEST_CR0_MASK macro tracks CR0 bits that are forced to zero by the VMX architecture, i.e. CR0.{NW,CD} must always be zero in the hardware CR0 post-VMXON. Rename the macro to clarify its purpose, be consistent with KVM_VM_CR0_ALWAYS_ON and avoid confusion with the CR0_GUEST_HOST_MASK field. Signed-off-by: -
Paolo Bonzini authored
Merge tag 'kvm-s390-next-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390/vfio-ap: Fixes and enhancements for vfio-ap - add tracing - fix a locking bug - make local functions and data static
-
- 10 Oct, 2018 1 commit
-
-
Paolo Bonzini authored
Merge tag 'kvm-ppc-next-4.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD PPC KVM update for 4.20. The major new feature here is nested HV KVM support. This allows the HV KVM module to load inside a radix guest on POWER9 and run radix guests underneath it. These nested guests can run in supervisor mode and don't require any additional instructions to be emulated, unlike with PR KVM, and so performance is much better than with PR KVM, and is very close to the performance of a non-nested guest. A nested hypervisor (a guest with nested guests) can be migrated to another host and will bring all its nested guests along with it. A nested guest can also itself run guests, and so on down to any desired depth of nesting. Apart from that there are a series of updates for IOMMU handling from Alexey Kardashevskiy, a "one VM per core" mode for HV KVM for security-paranoid applications, and a small fix for PR KVM.
-
- 09 Oct, 2018 7 commits
-
-
Paul Mackerras authored
This adds a KVM_PPC_NO_HASH flag to the flags field of the kvm_ppc_smmu_info struct, and arranges for it to be set when running as a nested hypervisor, as an unambiguous indication to userspace that HPT guests are not supported. Reporting the KVM_CAP_PPC_MMU_HASH_V3 capability as false could be taken as indicating only that the new HPT features in ISA V3.0 are not supported, leaving it ambiguous whether pre-V3.0 HPT features are supported. Reviewed-by:
David Gibson <david@gibson.dropbear.id.au> Signed-off-by:
Paul Mackerras <paulus@ozlabs.org>
-
Paul Mackerras authored
With this, userspace can enable a KVM-HV guest to run nested guests under it. The administrator can control whether any nested guests can be run; setting the "nested" module parameter to false prevents any guests becoming nested hypervisors (that is, any attempt to enable the nested capability on a guest will fail). Guests which are already nested hypervisors will continue to be so. Reviewed-by:
-
Paul Mackerras authored
This merges in the "ppc-kvm" topic branch of the powerpc tree to get a series of commits that touch both general arch/powerpc code and KVM code. These commits will be merged both via the KVM tree and the powerpc tree. Signed-off-by: -
Paul Mackerras authored
This adds a list of valid shadow PTEs for each nested guest to the 'radix' file for the guest in debugfs. This can be useful for debugging. Reviewed-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Paul Mackerras authored
With this, the KVM-HV module can be loaded in a guest running under KVM-HV, and if the hypervisor supports nested virtualization, this guest can now act as a nested hypervisor and run nested guests. This also adds some checks to inform userspace that HPT guests are not supported by nested hypervisors (by returning false for the KVM_CAP_PPC_MMU_HASH_V3 capability), and to prevent userspace from configuring a guest to use HPT mode. Signed-off-by:
-
Suraj Jitindar Singh authored
The hcall H_ENTER_NESTED takes two parameters: the address in L1 guest memory of a hv_regs struct and the address of a pt_regs struct. The hcall requests the L0 hypervisor to use the register values in these structs to run a L2 guest and to return the exit state of the L2 guest in these structs. These are in the endianness of the L1 guest, rather than being always big-endian as is usually the case for PAPR hypercalls. This is convenient because it means that the L1 guest can pass the address of the regs field in its kvm_vcpu_arch struct. This also improves performance slightly by avoiding the need for two copies of the pt_regs struct. When reading/writing these structures, this patch handles the case where the endianness of the L1 guest differs from that of the L0 hypervisor, by byteswapping the structures after reading and before writing them back. Since all the fields of the pt_regs are of the same type, i.e., unsigned long, we treat it as an array of unsigned longs. The fields of struct hv_guest_state are not all the same, so its fields are byteswapped individually. Reviewed-by:
Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by:
-
Suraj Jitindar Singh authored
restore_hv_regs() is used to copy the hv_regs L1 wants to set to run the nested (L2) guest into the vcpu structure. We need to sanitise these values to ensure we don't let the L1 guest hypervisor do things we don't want it to. We don't let data address watchpoints or completed instruction address breakpoints be set to match in hypervisor state. We also don't let L1 enable features in the hypervisor facility status and control register (HFSCR) for L2 which we have disabled for L1. That is L2 will get the subset of features which the L0 hypervisor has enabled for L1 and the features L1 wants to enable for L2. This could mean we give L1 a hypervisor facility unavailable interrupt for a facility it thinks it has enabled, however it shouldn't have enabled a facility it itself doesn't have for the L2 guest. We sanitise the registers when copying in the L2 hv_regs. We don't need to sanitise when copying back the L1 hv_regs since these shouldn't be able to contain invalid values as they're just what was copied out. Reviewed-by:
-
