- 24 May, 2012 1 commit
-
-
Andy Adamson authored
We only support one layout type per file system, so one threshold_item4 per mdsthreshold4. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 23 May, 2012 3 commits
-
-
Trond Myklebust authored
Ensure that a process that uses the nfs_client->cl_cons_state test for whether the initialisation process is finished does not read stale data. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
Since the struct nfs_client gets added to the global nfs_client_list before it is initialised, it is possible that rpc_pipefs_event can end up trying to create idmapper entries on such a thing. The solution is to have the mount notification wait for the initialisation of each nfs_client to complete, and then to skip any entries for which the it failed. Reported-by: Stanislav Kinsbursky <skinsbursky@parallels.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
-
Trond Myklebust authored
Session initialisation is not complete until the lease manager has run. We need to ensure that both nfs4_init_session and nfs4_init_ds_session do so, and that they check for any resulting errors in clp->cl_cons_state. Only after this is done, can nfs4_ds_connect check the contents of clp->cl_exchange_flags. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Andy Adamson <andros@netapp.com>
-
- 22 May, 2012 19 commits
-
-
Chuck Lever authored
Save the server major and minor ID results from EXCHANGE_ID, as they are needed for detecting server trunking. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
"noresvport" and "discrtry" can be passed to nfs_create_rpc_client() by setting flags in the passed-in nfs_client. This change makes it easy to add new flags. Note that these settings are now "sticky" over the lifetime of a struct nfs_client, and may even be copied when an nfs_client is cloned. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Continue to rationalize the locking in nfs_get_client() by moving the logic that handles the case where a matching server IP address is not found. When we support server trunking detection, client initialization may return a different nfs_client struct than was passed to it. Change the synopsis of the init_client methods to return an nfs_client. The client initialization logic in nfs_get_client() is not much more than a wrapper around ->init_client. It's simpler to keep the little bits of error handling in the version-specific init_client methods. No behavior change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: Code that takes and releases nfs_client_lock remains in nfs_get_client(). Logic that handles a pre-existing nfs_client is moved to a separate function. No behavior change is expected. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Currently our NFS client assigns a unique SETCLIENTID boot verifier for each server IP address it knows about. It's set to CURRENT_TIME when the struct nfs_client for that server IP is created. During the SETCLIENTID operation, our client also presents an nfs_client_id4 string to servers, as an identifier on which the server can hang all of this client's NFSv4 state. Our client's nfs_client_id4 string is unique for each server IP address. An NFSv4 server is obligated to wipe all NFSv4 state associated with an nfs_client_id4 string when the client presents the same nfs_client_id4 string along with a changed SETCLIENTID boot verifier. When our client unmounts the last of a server's shares, it destroys that server's struct nfs_client. The next time the client mounts that NFS server, it creates a fresh struct nfs_client with a fresh boot verifier. On seeing the fresh verifer, the server wipes any previous NFSv4 state associated with that nfs_client_id4. However, NFSv4.1 clients are supposed to present the same nfs_client_id4 string to all servers. And, to support Transparent State Migration, the same nfs_client_id4 string should be presented to all NFSv4.0 servers so they recognize that migrated state for this client belongs with state a server may already have for this client. (This is known as the Uniform Client String model). If the nfs_client_id4 string is the same but the boot verifier changes for each server IP address, SETCLIENTID and EXCHANGE_ID operations from such a client could unintentionally result in a server wiping a client's previously obtained lease. Thus, if our NFS client is going to use a fixed nfs_client_id4 string, either for NFSv4.0 or NFSv4.1 mounts, our NFS client should use a boot verifier that does not change depending on server IP address. Replace our current per-nfs_client boot verifier with a per-nfs_net boot verifier. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
nfs4_reset_all_state() refreshes the boot verifier a server sees to trigger that server to wipe this client's state. This function is invoked when an NFSv4.1 server reports that it has revoked some or all of a client's NFSv4 state. To facilitate server trunking discovery, we will eventually want to move the cl_boot_time field to a more global structure. The Uniform Client String model (and specifically, server trunking detection) requires that all servers see the same boot verifier until the client actually does reboot, and not a fresh verifier every time the client unmounts and remounts the server. Without the cl_boot_time field, however, nfs4_reset_all_state() will have to find some other way to force the server to purge the client's NFSv4 state. Because these verifiers are opaque (ie, the server doesn't know or care that they happen to be timestamps), we can force the server to wipe NFSv4 state by updating the boot verifier as we do now, then immediately afterwards establish a fresh client ID using the old boot verifier again. Hopefully there are no extra paranoid server implementations that keep track of the client's boot verifiers and prevent clients from reusing a previous one. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: this structure is unused. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: update to use matching types in "if" expressions. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Introduced by commit e50a7a1a "NFS: make NFS client allocated per network namespace context," Tue Jan 10, 2012. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the impl_id field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 7d2ed9ac "NFSv4: parse and display server implementation ids," Fri Feb 17, 2012. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Clean up: When naming fields and data types, follow established conventions to facilitate accurate grep/cscope searches. Additionally, for consistency, move the scope field into the NFSv4- specific part of the nfs_client, and free that memory in the logic that shuts down NFSv4 nfs_clients. Introduced by commit 99fe60d0 "nfs41: exchange_id operation", April 1 2009. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
fs/nfs/nfs4state.c does not yet have any dprintk() call sites, and I'm about to introduce some. We will need a new flag for enabling them. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Chuck Lever authored
The SETCLIENTID boot verifier is opaque to NFSv4 servers, thus there is no requirement for byte swapping before the client puts the verifier on the wire. This treatment is similar to other timestamp-based verifiers. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Bryan Schumaker authored
The "struct inode *inode" was only used in a dprintk, so compiling with CONFIG_SUNRPC_DEBUG off triggers a warning. To get around this, I remove the "struct inode *inode" variable and instead change the dprintk()s to use hdr->inode instead. Signed-off-by: Bryan Schumaker <bjschuma@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
We reset all I/O on a disconnected data server through the pgio layer indicated by the NFS_IOHDR_REDO flag. Differentiate between on-the-wire tasks returning with an error which must call rpc_call_done and tasks woken from the data server slot_table_waitq waiting for a session slot with a status of zero which call rpc_exit in rpc_prepare and need to skip rpc_call_done. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
filelayout_scan_commit_lists needs to bump the reference count on the struct nfs_page just like nfs_scan_commit_list(). Reported-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 21 May, 2012 1 commit
-
-
Trond Myklebust authored
-
- 19 May, 2012 14 commits
-
-
Andy Adamson authored
The "invalid layout" class of errors is handled by destroying the layout and getting a new layout from the server. Currently, the layout must be destroyed before a new layout can be obtained. This means that all references (e.g.lsegs) to the "to be destroyed" layout header must be dropped before it can be destroyed. This in turn means waiting for all in flight RPC's using the old layout as well as draining the data server session slot table wait queue. Set the NFS_LAYOUT_INVALID flag to redirect I/O to the MDS while waiting for the old layout to be destroyed. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
When the last DS io is processed, the data server client record will be freed. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Prepare to put a dis-connected DS client record. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Let the MDS know that you are redirecting I/O from pNFS to MDS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The DS has a connection error (invalid deviceid). Drain the fore channel slot table waitq. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Tasks sleeping on the slot table waitq wake to the rpc_prepare_task state. Reset the task for io through the MDS if the deviceid is invalid. The reset functions put the io pages through the pageio layer which has the advantage of re-coalescing which allows for the MDS and DS having different r/wsizes. Exit the awakened task without executing the rpc_call_done routine. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Replaced by filelayout_reset_write and filelayout_reset_read Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
This prevents the use of any layout for i/o that references the deviceid. I/O is redirected through the MDS. Redirect the unhandled failed I/O to the MDS without marking either the layout or the deviceid invalid. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Set the recovery parameters for data servers. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
RPC_TASK_SOFTCONN returns connection errors to the caller which allows the pNFS file layout to quickly try the MDS or perhaps another DS. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
The invalid layout bits are should only be used to block LAYOUTGETs. Do not invalidate a layout on deviceid invalidation. Do not invalidate a layout on un-handled READ, WRITE, COMMIT errors. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Andy Adamson authored
Move the invalid deviceid test into nfs4_fl_prepare_ds, called by the filelayout read, write, and commit routines. NFS4_DEVICE_ID_NEG_ENTRY is no longer needed. Remove redundant printk's - filelayout_mark_devid_invalid prints a KERN_WARNING. An invalid device prevents pNFS io. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Matthew Treinish authored
Simplified error gotos to make it slightly easier to read, it doesn't affect the functionality of the routine. Signed-off-by: Matthew Treinish <treinish@linux.vnet.ibm.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Trond Myklebust authored
xprt_alloc_slot will call rpc_delay() to make the task wait a bit before retrying when it gets back an -ENOMEM error from xprt_dynamic_alloc_slot. The problem is that rpc_delay will clear the task->tk_status, causing call_reserveresult to abort the task. The solution is simply to let call_reserveresult handle the ENOMEM error directly. Reported-by: Jeff Layton <jlayton@redhat.com> Cc: stable@vger.kernel.org [>= 3.1] Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
- 16 May, 2012 2 commits
-
-
Jeff Layton authored
It's easily possible for these allocations to fail since we're using GFP_NOWAIT here. We don't want to spam the logs with warnings about that though. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-
Benny Halevy authored
fs/nfs/nfs4namespace.c: In function ‘nfs4_create_sec_client’: fs/nfs/nfs4namespace.c:171:2: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] Introduced by commit 72de53ec "NFS: Do secinfo as part of lookup" Signed-off-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
-