- 22 Apr, 2009 40 commits
-
-
Vivek Natarajan authored
Signed-off-by:
Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Johannes Berg authored
Some hardware defects may require the hardware to be re-initialised completely from scratch. Drivers would need much information (for instance the current MAC address, crypto keys, beaconing information, etc.) stored duplicated from mac80211 to be able to do this, so let mac80211 help them. The new ieee80211_restart_hw() function requires the same code as resuming, so move that code into a new ieee80211_reconfig() function in util.c and leave only the suspend code in pm.c. Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Christian Lamparter authored
This patch adds licensing, author information and a description to the module. Signed-off-by:
Christian Lamparter <chunkeey@web.de> Signed-off-by:
-
Gábor Stefanik authored
This message appears to be nothing more than a leftover of the experimental-8187B era. Also, we print the HW type in the hwaddr line, making this message reduntant. And it's definitely not important enough to be a KERN_WARNING. Signed-off-by:
Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by:
-
Sujith authored
It is already handled properly in ath9k_hw_getnf. Signed-off-by:
Sujith <Sujith.Manoharan@atheros.com> Signed-off-by:
-
Sujith authored
This patch fixes a bug in ath9k_hw_init_cal() where the wrong calibration was being done for non-AR9285 chipsets. Also add a few helpful comments. Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
This patch replaces old 'hal_' prefixes with 'ath9k_'. Signed-off-by:
-
Sujith authored
This patch cleans up the functions dealing with calibration, using proper return values. ath9k_hw_per_calibration(), ath9k_hw_calibrate now return bool values instead of setting error values in the function arguments. Signed-off-by:
-
Sujith authored
The various ANI timers have to be initialized properly when starting the calibration timer. Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
ADC gain calibration has to be done for all non 2GHZ-HT20 channels. Regression from "ath9k: use ieee80211_conf on ath9k_hw_iscal_supported()" Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
The operating HT mode is stored in chanmode and not channelFlags. Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
Signed-off-by:
-
Sujith authored
A full HW reset needs to be done on termination of a scan run. Not setting SC_OP_FULL_RESET resulted in doing a fast channel change. Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
The driver-specific region has to be freed in case of a DMA mapping failure. Cc: stable@kernel.org Signed-off-by:
-
Sujith authored
Radio enable/disable have to handle ASPM state properly. This patch fixes it. Signed-off-by:
-
Steven Luo authored
ath9k_hw_getisr() doesn't appear to set anything in the status mask for PCI FATAL or PERR interrupts (AR_INTR_SYNC_HOST1_FATAL/PERR), which the open-source HAL seems to do. This means that the card isn't reset after these interrupts. This patch seems to fix a problem where the wireless drops out with an "ath9k: received PCI FATAL interrupt" in dmesg after some time; the hardware is an AR5416 in an ASUS WL-500W running 2.6.28.7 (OpenWRT) and compat-wireless 2009-03-31. Signed-off-by:
Steven Luo <steven@steven676.net> Signed-off-by:
-
Larry Finger authored
This patch ports commit c97a4ccc "b43: Fix beacon BH update" to b43legacy. It fixes beacon updating in the bottomhalf. In case the device is busy, we will defer to later in the IRQ handler. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Acked-by:
Michael Buesch <mb@bu3sch.de> Tested-by:
David Ellingsworth <david@identd.dyndns.org> Signed-off-by:
-
Larry Finger authored
This patch ports the beaconing fixes from commit a82d9922 "b43: Beaconing fixes" to b43legacy. Basically it prevents the card from triggering the beacon IRQ over and over again. Signed-off-by:
-
Johannes Berg authored
That will make the various cases where the WARN_ON can happen distinguishable. Signed-off-by:
-
Christian Lamparter authored
The signal quality percentage is now calculated by mac80211 stack. Signed-off-by:
-
Christian Lamparter authored
This patch takes care of outstanding TODOs: /* TODO: some devices have 4 more free slots for rx keys */ Now the driver can utilize all available key slots instead of just 4. Obviously, this helps most in AP/IBSS(/MESH) mode, when we have to use more different keys. Signed-off-by:
-
Larry Finger authored
The rfkill system fails to issue a LED trigger event when the rfkill state changes. Signed-off-by:
-
Michael Buesch authored
This removes unnecessary MMIO accesses in the interrupt hotpath. Signed-off-by:
-
John W. Linville authored
drivers/net/wireless/libertas/rx.c: In function ‘lbs_process_rxed_packet’: drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 4 has type ‘__le32’ drivers/net/wireless/libertas/rx.c:184: warning: format ‘%zd’ expects type ‘signed size_t’, but argument 5 has type ‘unsigned int’ Signed-off-by: -
Wey-Yi Guy authored
This patch adds interrupt statistics report to debugfs, this can help to understand number of interrupts happened which including HW/SW error for easier and better debugging. in /sys/kernel/debug/ieee80211/phyN/iwlagn/data directory use "cat interrupt" to view the current interrupt counter use "echo 0 > interrupt" to clear interrupt counter Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
Reinette Chatre <reinette.chatre@intel.com> Signed-off-by:
-
Mohamed Abbas authored
Fix displaying of wrong channel information when user query channel through debugfs Signed-off-by:
Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by:
-
Daniel C Halperin authored
For completeness, we should also make sure that the 3x3 MIMO rates are also checked when seeing if one rxon struct matches another. Signed-off-by:
Daniel C Halperin <daniel.c.halperin@intel.com> Acked-by:
-
Mohamed Abbas authored
We need to sync rxon_active with changes after we commit rxon_assoc, without rxon_active will still have the old data that cause iwl_send_rxon_assoc to fail with no change in rxon command. Signed-off-by:
-
Daniel C Halperin authored
This patch fixes a bug introduced by commit "iwlwifi: adding MIMO3 support in rate scaling". We should not set the dual_stream_ant_msk (for 2x2 MIMO) when using a 3x3 rate, this will cause a SYSASSERT in uCode. Note: there is no triple_stream_ant_msk, because all three antennas are used. Signed-off-by:
-
Wey-Yi Guy authored
This patch adding MCS information in rate_scale_table, it help for debugging rate scaling algorithm, easy to understand what is the current rate scale table and matching modulation, plus the last mcs used for tx. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_reset_tsf from iwlwifi. Signed-off-by:
Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_get_tx_stats from iwlwifi. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_config_interface from iwlwifi. Signed-off-by:
-
Abhijeet Kolekar authored
add config_ap lib op to iwlwifi and iwl3945 in preparation of future 3945 porting actions. Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_config from iwlwifi Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_mac_remove_interface from iwlwifi Signed-off-by:
-
Abhijeet Kolekar authored
Signed-off-by:
-
Abhijeet Kolekar authored
3945 can now use iwl_set_mode from iwlcore library. Signed-off-by:
-
Abhijeet Kolekar authored
add set_rxon_chain op to iwlwifi cfg ops in preparation of future 3945 porting work. Signed-off-by:
-
Abhijeet Kolekar authored
iwl3945 can now use iwl_get_sta_id. Signed-off-by:
-
