Change rt2x00_rf_read() and rt2x00_rf_write() to subtract 1 from the rf
register number.  This is needed because the rf registers are enumerated
starting with one.  The size of the rf register cache is just enough to
hold all registers, so writing to the highest register was corrupting
memory.  Add a check to make sure that the rf register number is valid.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Cc: stable@kernel.org
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

Traffic received with a priority tag (VID = 0) and non-zero priority value was
incorrectly handled by the VLAN packet code path due to a check on zero for
the whole VLAN tag instead of just the VID.

This patch masked out the priority field when checking the vlan tag for
received VLAN packets.
Signed-off-by: Lucy Liu <lucy.liu@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We return the ddp->len in ixgbe_fcoe_ddp() to indicate the length of data that
have been DDPed. However, it is possible that the length is 0, e.g., for SCSI
READ, the FCP_RSP may come back w/ SCSI status 0x28 as Task Set Full with no FCP
data for DDP. In ixgbe_fcoe_ddp(), we return 0 to indicate not passing DDPed
packets to upper layer. Therefore in the case of ddp->len being 0 upon FCP_RSP,
we do not want to return the 0 ddp->len as we want FCP_RSP to be always
delivered to the upper layer. This patch fixes this bug by setting rc only if
ddp->len is non-zero.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Defer napi resouce allocation to device attach.

o Free napi resources and delete napi during detach.

This ensures right behavior across firmware reset.
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

o Remove private workqueue in the driver, move all
  scheduled tasks to keventd workqueues. This makes
  ports (interfaces) of same / different NIC boards
  independent, in terms of their link watchdog and
  reset tasks.

o Move quick checks for link status and temperature
  in timer callback, schedule watchdog task only if
  link status changed or temperature reached critical
  threshold.

This also fixes deadlock when thermal panic occurs,
watchdog work was flushing workqueue that it was
sitting on.
Signed-off-by: Amit Kumar Salecha <amit@qlogic.com>
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently setting rx-usecs when the interface is in legacy interrupt
mode it is not immediate.  We were only setting EITR for each MSIx
vector and since this count would be zero for legacy mode it wasn't
set until after a reset.  This patch corrects that by checking what
mode we are in and then setting EITR accordingly.
Signed-off-by: Don Skidmore <donald.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For 'real' hardware CAN devices the netlink interface is used to set CAN
specific communication parameters. Real CAN hardware can not be created with
the ip tool ...

The invocation of 'ip link add type can' lead to an oops as the standard rtnl
newlink function was called:

http://bugzilla.kernel.org/show_bug.cgi?id=13954

This patch adds a private newlink function for the CAN device driver interface
that unconditionally returns -EOPNOTSUPP.
Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net>
Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
CC: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We splice skbs from the pending queue for a TID
onto the local pending queue when tearing down a
block ack request. This is not necessary unless we
actually have received a request to start a block ack
request (rate control, for example). If we never received
that request we should not be splicing the tid pending
queue as it would be null, causing a panic.

Not sure yet how exactly we allowed through a call when the
tid state does not have at least HT_ADDBA_REQUESTED_MSK set,
that will require some further review as it is not quite
obvious.

For more information see the bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=13922

This fixes this oops:

BUG: unable to handle kernel NULL pointer dereference at 00000030
IP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211]
*pdpt = 0000000002d1e001 *pde = 0000000000000000
Thread overran stack, or stack corrupted
Oops: 0000 [#1] SMP
last sysfs file: /sys/module/aes_generic/initstate
Modules linked in: <bleh>

Pid: 0, comm: swapper Not tainted (2.6.31-rc5-wl #2) Dell DV051
EIP: 0060:[<f8806c70>] EFLAGS: 00010292 CPU: 0
EIP is at ieee80211_agg_splice_packets+0x40/0xc0 [mac80211]
EAX: 00000030 EBX: 0000004c ECX: 00000003 EDX: 00000000
ESI: c1c98000 EDI: f745a1c0 EBP: c076be58 ESP: c076be38
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=c076a000 task=c0709160 task.ti=c076a000)
Stack: <bleh2>
Call Trace:
 [<f8806edb>] ? ieee80211_stop_tx_ba_cb+0xab/0x150 [mac80211]
 [<f8802f1e>] ? ieee80211_tasklet_handler+0xce/0x110 [mac80211]
 [<c04862ff>] ? net_rx_action+0xef/0x1d0
 [<c0149378>] ? tasklet_action+0x58/0xc0
 [<c014a0f2>] ? __do_softirq+0xc2/0x190
 [<c018eb48>] ? handle_IRQ_event+0x58/0x140
 [<c01205fe>] ? ack_apic_level+0x7e/0x270
 [<c014a1fd>] ? do_softirq+0x3d/0x40
 [<c014a345>] ? irq_exit+0x65/0x90
 [<c010a6af>] ? do_IRQ+0x4f/0xc0
 [<c014a35d>] ? irq_exit+0x7d/0x90
 [<c011d547>] ? smp_apic_timer_interrupt+0x57/0x90
 [<c01094a9>] ? common_interrupt+0x29/0x30
 [<c010fd9e>] ? mwait_idle+0xbe/0x100
 [<c0107e42>] ? cpu_idle+0x52/0x90
 [<c054b1a5>] ? rest_init+0x55/0x60
 [<c077492d>] ? start_kernel+0x315/0x37d
 [<c07743ce>] ? unknown_bootoption+0x0/0x1f9
 [<c0774099>] ? i386_start_kernel+0x79/0x81
Code: <bleh3>
EIP: [<f8806c70>] ieee80211_agg_splice_packets+0x40/0xc0 [mac80211] SS:ESP 0068:c076be38
CR2: 0000000000000030

Cc: stable@kernel.org
Testedy-by: Jack Lau <jackelectronics@hotmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

The driver always:
1. allocate cp->rx_buf_sz + NET_IP_ALIGN
2. map cp->rx_buf_sz
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 57921c31.

On request from John Linville:

	It has been shown to create a new problem.  There is work
	towards a solution to that one, but it isn't a simple
	clean-up.
Signed-off-by: David S. Miller <davem@davemloft.net>

queue == __AR9170_NUM_TXQ would cause a bug on the next line.

found by Smatch ( http://repo.or.cz/w/smatch.git ).

Cc: stable@kernel.org
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

When ar9170-2.fw was missing, the driver erroneously complained
about missing the initialization values file ar9170-1.fw...
Signed-off-by: Christian Lamparter <chunkeey@web.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

If the length is less or equal to frag_prefix_size in the first iteration
we write skb_frags_rx[-1] and read from priv->frag_info[-1]
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent read from cards[-1] when no card was found.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An `options[cards_found]' that equals `sizeof(options_mapping)' is already beyond
the array.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 1748376b,
	net: Use a percpu_counter for sockets_allocated

added percpu_counter function calls to sctp_proc_init code path, but
forgot to add them to sctp_proc_exit().  This resulted in a following
Ooops when performing this test
	# modprobe sctp
	# rmmod -f sctp
	# modprobe sctp

[  573.862512] BUG: unable to handle kernel paging request at f8214a24
[  573.862518] IP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70
[  573.862530] *pde = 37010067 *pte = 00000000
[  573.862534] Oops: 0002 [#1] SMP
[  573.862537] last sysfs file: /sys/module/libcrc32c/initstate
[  573.862540] Modules linked in: sctp(+) crc32c libcrc32c binfmt_misc bridge
stp bnep lp snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep
snd_pcm_oss snd_mixer_oss arc4 joydev snd_pcm ecb pcmcia snd_seq_dummy
snd_seq_oss iwlagn iwlcore snd_seq_midi snd_rawmidi snd_seq_midi_event
yenta_socket rsrc_nonstatic thinkpad_acpi snd_seq snd_timer snd_seq_device
mac80211 psmouse sdhci_pci sdhci nvidia(P) ppdev video snd soundcore serio_raw
pcspkr iTCO_wdt iTCO_vendor_support led_class ricoh_mmc pcmcia_core intel_agp
nvram agpgart usbhid parport_pc parport output snd_page_alloc cfg80211 btusb
ohci1394 ieee1394 e1000e [last unloaded: sctp]
[  573.862589]
[  573.862593] Pid: 5373, comm: modprobe Tainted: P  R        (2.6.31-rc3 #6)
7663B15
[  573.862596] EIP: 0060:[<c0308b8f>] EFLAGS: 00010286 CPU: 1
[  573.862599] EIP is at __percpu_counter_init+0x3f/0x70
[  573.862602] EAX: f8214a20 EBX: f80faa14 ECX: c48c0000 EDX: f80faa20
[  573.862604] ESI: f80a7000 EDI: 00000000 EBP: f69d5ef0 ESP: f69d5eec
[  573.862606]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  573.862610] Process modprobe (pid: 5373, ti=f69d4000 task=c2130c70
task.ti=f69d4000)
[  573.862612] Stack:
[  573.862613]  00000000 f69d5f18 f80a70a8 f80fa9fc 00000000 fffffffc f69d5f30
c018e2d4
[  573.862619] <0> 00000000 f80a7000 00000000 f69d5f88 c010112b 00000000
c07029c0 fffffffb
[  573.862626] <0> 00000000 f69d5f38 c018f83f f69d5f54 c0557cad f80fa860
00000001 c07010c0
[  573.862634] Call Trace:
[  573.862644]  [<f80a70a8>] ? sctp_init+0xa8/0x7d4 [sctp]
[  573.862650]  [<c018e2d4>] ? marker_update_probe_range+0x184/0x260
[  573.862659]  [<f80a7000>] ? sctp_init+0x0/0x7d4 [sctp]
[  573.862662]  [<c010112b>] ? do_one_initcall+0x2b/0x160
[  573.862666]  [<c018f83f>] ? tracepoint_module_notify+0x2f/0x40
[  573.862671]  [<c0557cad>] ? notifier_call_chain+0x2d/0x70
[  573.862678]  [<c01588fd>] ? __blocking_notifier_call_chain+0x4d/0x60
[  573.862682]  [<c016b2f1>] ? sys_init_module+0xb1/0x1f0
[  573.862686]  [<c0102ffc>] ? sysenter_do_call+0x12/0x28
[  573.862688] Code: 89 48 08 b8 04 00 00 00 e8 df aa ec ff ba f4 ff ff ff 85
c0 89 43 14 74 31 b8 b0 18 71 c0 e8 19 b9 24 00 a1 c4 18 71 c0 8d 53 0c <89> 50
04 89 43 0c b8 b0 18 71 c0 c7 43 10 c4 18 71 c0 89 15 c4
[  573.862725] EIP: [<c0308b8f>] __percpu_counter_init+0x3f/0x70 SS:ESP
0068:f69d5eec
[  573.862730] CR2: 00000000f8214a24
[  573.862734] ---[ end trace 39c4e0b55e7cf54d ]---
Signed-off-by: Rafael Laufer <rlaufer@cisco.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If vlan has been enabled. ifdown followed by ifup will lost hardware
related state.

Also remove duplicated operation in gfar_vlan_rx_register().
Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Dai Haruki <dai.haruki@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The bank offset was being incorrectly calculated on ICH9 parts with a bank
size of 8K (instead of the more common 4K bank) which would cause any NVM
writes to be done on the wrong address after switching from bank 1 to bank
0.  Additionally, assume we are meant to use bank 0 if a valid bank is not
detected, and remove the unnecessary acquisition of the SW/FW/HW semaphore
when writing to the shadow ram version of the NVM image.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For ICHx parts, write the EXTCNF_CTRL.SWFLAG bit once when trying to
acquire the SW/FW/HW semaphore instead of multiple times to prevent the
hardware from having problems (especially for systems with manageability
enabled), and extend the timeout for the hardware to set the SWFLAG bit.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

For 82599, packet split has to be disabled for FCoE direct data placement.
However, this is only required on received queues allocated for FCoE. This
patch adds a per ring flags to indicate if packet split is disabled on a
per queue basis, particularly for FCoE, as packet split must be disabled
for large receive using direct data placement (DDP).
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Instead of passing the register index of the corresponding rx_ring and find
the way back to get to corresponding rx_ring in ixgbe_configure_srrctl(),
simplify the function ixgbe_configure_srrctl() by passing the rx_ring into
it. Then the register index for that rx_ring is already available from
rx_ring->reg_idx.
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

As it is, parts of the ioctl runs under the RTNL and parts of
it do not.  The unlocked section is still protected by the BKL,
but there can be subtle races.  For example, Eric Biederman and
Paul Moore observed that if two threads tried to create two tun
devices on the same file descriptor, then unexpected results
may occur.

As there isn't anything in the ioctl that is expected to sleep
indefinitely, we can prevent this from occurring by extending
the RTNL lock coverage.

This also allows to get rid of the BKL.

Finally, I changed tun_get_iff to take a tun device in order to
avoid calling tun_put which would dead-lock as it also tries to
take the RTNL lock.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit f0b3fbea ("FEC Buffer rework")
breaks transmission of packets where the skb data buffer is not memory
aligned according to FEC_ALIGNMENT. It incorrectly passes to
dma_sync_single() the buffer address directly from the skb, instead of
the address calculated for use (which may be the skb address or one of
the bounce buffers).

It seems there is no use converting the cpu address of the buffer to
a physical either, since dma_map_single() expects the cpu address and
will return the dma address to use in the descriptor. So remove the use
of __pa() on the buffer address as well.

This patch is against 2.6.30-rc5. This breakage is a regression over
2.6.30, which does not have this problem.
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

raw_getname() can leak 10 bytes of kernel memory to user

(two bytes hole between can_family and can_ifindex,
8 bytes at the end of sockaddr_can structure)
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Oliver Hartkopp <oliver@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes hash collisions in cases where number
of entries have incrementing IP source and destination addresses
from single respective subnets (i.e. 192.168.0.1-172.16.0.1,
192.168.0.2-172.16.0.2, and so on.).
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

strlcpy() will always null terminate the string.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Chris Snook <csnook@redhat.com>
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

io[i] is read before the bounds check on i, order should be reversed.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update MAINTAINERS to reflect my current (non-)affiliation.  Anyone
hiring?
Signed-off-by: Chris Snook <chris.snook@gmail.com>
Cc: Jay Cliburn <jcliburn@gmail.com>
Cc: Jie Yang <jie.yang@atheros.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'for-linus' of git://git.infradead.org/ubi-2.6:
  UBI: compatible fallback in absense of sequence numbers
  UBI: fix double free on error path

* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Avoid redelivery of edge interrupt before next edge
  KVM: MMU: limit rmap chain length
  KVM: ia64: fix build failures due to ia64/unsigned long mismatches
  KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpc
  KVM: fix ack not being delivered when msi present
  KVM: s390: fix wait_queue handling
  KVM: VMX: Fix locking imbalance on emulation failure
  KVM: VMX: Fix locking order in handle_invalid_guest_state
  KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in kvm_mmu_change_mmu_pages
  KVM: SVM: force new asid on vcpu migration
  KVM: x86: verify MTRR/PAT validity
  KVM: PIT: fix kpit_elapsed division by zero
  KVM: Fix KVM_GET_MSR_INDEX_LIST

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: silence vblank warnings
  drm: silence pointless vblank warning.
  drm: When adding probed modes, preserve duplicate mode types

Merge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  posix_cpu_timers_exit_group(): Do not use thread_group_cputimer()

Merge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Fix/complete ftrace event records sampling
  perf_counter, ftrace: Fix perf_counter integration
  tracing/filters: Always free pred on filter_add_subsystem_pred() failure
  tracing/filters: Don't use pred on alloc failure
  ring-buffer: Fix memleak in ring_buffer_free()
  tracing: Fix recordmcount.pl to handle sections with only weak functions
  ring-buffer: Fix advance of reader in rb_buffer_peek()
  tracing: do not use functions starting with .L in recordmcount.pl
  ring-buffer: do not disable ring buffer on oops_in_progress
  ring-buffer: fix check of try_to_discard result

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix buffer overflow in efi_init()
  x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci
  x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus
  x86: Fix VMI && stack protector

Merge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: Fix typos in documentation
  lockdep: Fix file mode of lock_stat
  rtmutex: Avoid deadlock in rt_mutex_start_proxy_lock()

This patch implements the kernel side support for ftrace event
record sampling.

A new counter sampling attribute is added:

   PERF_SAMPLE_TP_RECORD

which requests ftrace events record sampling. In this case
if a PERF_TYPE_TRACEPOINT counter is active and a tracepoint
fires, we emit the tracepoint binary record to the
perfcounter event buffer, as a sample.

Result, after setting PERF_SAMPLE_TP_RECORD attribute from perf
record:

 perf record -f -F 1 -a -e workqueue:workqueue_execution
 perf report -D

 0x21e18 [0x48]: event: 9
 .
 . ... raw event: size 72 bytes
 .  0000:  09 00 00 00 01 00 48 00 d0 c7 00 81 ff ff ff ff  ......H........
 .  0010:  0a 00 00 00 0a 00 00 00 21 00 00 00 00 00 00 00  ........!......
 .  0020:  2b 00 01 02 0a 00 00 00 0a 00 00 00 65 76 65 6e  +...........eve
 .  0030:  74 73 2f 31 00 00 00 00 00 00 00 00 0a 00 00 00  ts/1...........
 .  0040:  e0 b1 31 81 ff ff ff ff                          .......
.
0x21e18 [0x48]: PERF_EVENT_SAMPLE (IP, 1): 10: 0xffffffff8100c7d0 period: 33

The raw ftrace binary record starts at offset 0020.

Translation:

 struct trace_entry {
	type		= 0x2b = 43;
	flags		= 1;
	preempt_count	= 2;
	pid		= 0xa = 10;
	tgid		= 0xa = 10;
 }

 thread_comm = "events/1"
 thread_pid  = 0xa = 10;
 func	    = 0xffffffff8131b1e0 = flush_to_ldisc()

What will come next?

 - Userspace support ('perf trace'), 'flight data recorder' mode
   for perf trace, etc.

 - The unconditional copy from the profiling callback brings
   some costs however if someone wants no such sampling to
   occur, and needs to be fixed in the future. For that we need
   to have an instant access to the perf counter attribute.
   This is a matter of a flag to add in the struct ftrace_event.

 - Take care of the events recursivity! Don't ever try to record
   a lock event for example, it seems some locking is used in
   the profiling fast path and lead to a tracing recursivity.
   That will be fixed using raw spinlock or recursivity
   protection.

 - [...]

 - Profit! :-)
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>