Fix sparse warning:
net/tipc/link.c:1924:40: warning: Using plain integer as NULL pointer
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Govindarajulu Varadarajan says:

====================
enic: Check for DMA mapping error

After dma mapping the buffers, enic does not call dma_mapping_error() to check
if mapping is successful.

This series fixes the issue by checking return value of pci_dma_mapping_error()
after pci_map_single().

This is reported by redhat here
https://bugzilla.redhat.com/show_bug.cgi?id=1145016
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds generic statistics for enic. As of now dma_map_error is the only
member. dma_map_erro is incremented every time dma maping error happens.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch checks for pci_dma_mapping_error() after dma mapping the data.
If the dma mapping fails we remove the previously queued frags and return
NETDEV_TX_OK.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch makes vnic_wq_buf doubly liked list. This is needed for dma_mapping
error check, in case some frag's dma map fails, we need to move back and remove
previously queued buffers.
Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fugang Duan says:

====================
net: fec: add Wake-on-LAN support

The patch series enable FEC Wake-on-LAN feature for i.MX6q/dl and i.MX6SX SOCs.
FEC HW support sleep mode, when system in suspend status with FEC all clock gate
off, magic packet can wake up system. For different SOCs, there have special SOC
GPR register to let FEC enter sleep mode or exit sleep mode, add these to platform
callback for driver' call.

Patch#1: add WOL interface supports.
Patch#2: add SOC special sleep of/off operations for driver's sleep callback.
Patch#3: add magic pattern support for devicetree.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add FEC magic-packet feature support.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

i.MX6q/dl, i.MX6SX SOCs enet support sleep mode that magic packet can
wake up system in suspend status. For different SOCs, there have some
SOC specifical GPR register to set sleep on/off mode. So add these to
callback function for driver.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Support for Wake-on-LAN using Magic Packet. ENET IP supports sleep mode
in low power status, when system enter suspend status, Magic packet can
wake up system even if all SOC clocks are gate. The patch doing below things:
- flagging the device as a wakeup source for the system, as well as
  its Wake-on-LAN interrupt
- prepare the hardware for entering WoL mode
- add standard ethtool WOL interface
- enable the ENET interrupt to wake us

Tested on i.MX6q/dl sabresd, sabreauto boards, i.MX6SX arm2 boards.
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the following spare warning:
drivers/net/ethernet/freescale/gianfar.c:3521:60: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:3521:60:    expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:3521:60:    got unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16: warning: incorrect type in assignment (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:205:16:    expected unsigned int [usertype] *rfbptr
drivers/net/ethernet/freescale/gianfar.c:205:16:    got unsigned int [noderef] <asn:2>*<noident>
drivers/net/ethernet/freescale/gianfar.c:2918:44: warning: incorrect type in argument 1 (different address spaces)
drivers/net/ethernet/freescale/gianfar.c:2918:44:    expected unsigned int [noderef] <asn:2>*addr
drivers/net/ethernet/freescale/gianfar.c:2918:44:    got unsigned int [usertype] *rfbptr
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's no need to do header check for virtio-net since:

- Host sets dodgy for all gso packets from guest and check the header.
- Host should be prepared for all kinds of evil packets from guest, since
  malicious guest can send any kinds of packet.

So this patch sets NETIF_F_GSO_ROBUST for virtio-net to skip the check.

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the end asm/mach/irda.h header is not used by anybody except sa1100.
Move the header to the platform data includes dir and rename it to
irda-sa11x0.h.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert a call to init_timer and accompanying intializations of
the timer's data and function fields to a call to setup_timer.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression t,f,d;
@@

-init_timer(&t);
+setup_timer(&t,f,d);
-t.function = f;
-t.data = d;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert a call to init_timer and accompanying intializations of
the timer's data and function fields to a call to setup_timer.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression t,f,d;
@@

-init_timer(&t);
+setup_timer(&t,f,d);
-t.function = f;
-t.data = d;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert a call to init_timer and accompanying intializations of
the timer's data and function fields to a call to setup_timer.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression t,f,d;
@@

-init_timer(&t);
+setup_timer(&t,f,d);
-t.function = f;
-t.data = d;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert a call to init_timer and accompanying intializations of
the timer's data and function fields to a call to setup_timer.

A simplified version of the semantic match that fixes this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression t,f,d;
@@

-init_timer(&t);
+setup_timer(&t,f,d);
-t.function = f;
-t.data = d;
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Richard Cochran says:

====================
Time Counter fixes and improvements

Several PTP Hardware Clock (PHC) drivers implement the clock in
software using the timecounter/cyclecounter code. This series adds one
simple improvement and one more subtle fix to the shared timecounter
facility. Credit for this series goes to Janusz Użycki, who pointed
the issues out to me off list.

Patch #1 simply move the timecounter code into its own file. When
working on this series, it was really annoying to see half the kernel
recompile after every tweak to the timecounter stuff. There is no
reason to keep this together with the clocksource code.

Patch #2 implements an improved adjtime() method, and patches 3-10
convert all of the drivers over to the new method.

Patch #11 fixes a subtle but important issue with the timecounter WRT
frequency adjustment. As it stands now, a timecounter based PHC will
exhibit a variable frequency resolution (and variable time error)
depending on how often the clock is read.

In timecounter_read_delta(), the expression

   (delta * cc->mult) >> cc->shift;

can lose resolution from the adjusted value of 'mult'. If the value
of 'delta' is too small, then small changes in 'mult' have no effect.
However, if the delta value is large enough, then small changes in
'mult' will have an effect.

Reading the clock too often means smaller 'delta' values which in turn
will spoil the fine adjustments made to 'mult'. Up until now, this
effect did not show up in my testing. The following example explains
why.

The CPTS has an input clock of 250 MHz, and the clock source uses
mult=0x80000000 and shift=29, making the ticks to nanoseconds
conversion like this:

   ticks * 2^31
   ------------
       2^29

Imagine what happens if the clock is read every 10 milliseconds. Ten
milliseconds are about 2500000 ticks, which corresponds to about 21
bits. The product in the numerator has then 52 bits. After the shift
operation, 23 bits are preserved. This results in a frequency
adjustment resolution of about 0.1 ppm (not _too_ bad.)

A frequency resolution of 1 ppm requires 20 bits.
A frequency resolution of 1 ppb requires 30 bits.

For the 250 MHz CPTS clock, reading every 4 seconds yields a 1 ppb
resolution (which is the finest that our API allows).

However, the error can be much higher if the clock is read too often
or if time stamps occur close in time to read operations. In general
it is really not acceptable to allow the rate of clock readings to
influence the clock accuracy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current timecounter implementation will drop a variable amount
of resolution, depending on the magnitude of the time delta. In
other words, reading the clock too often or too close to a time
stamp conversion will introduce errors into the time values. This
patch fixes the issue by introducing a fractional nanosecond field
that accumulates the low order bits.
Reported-by: Janusz Użycki <j.uzycki@elproma.com.pl>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch changes the driver to use the new and improved method
for adjusting the offset of a timecounter.

Compile tested only.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Some PTP Hardware Clock drivers use a struct timecounter to represent
their clock. To adjust the time by a given offset, these drivers all
perform a two step read/write of their timecounter. However, it is
better and simpler just to adjust the offset in one step. This patch
introduces a little routine to help drivers implement the adjtime
method.
Suggested-by: Janusz Użycki <j.uzycki@elproma.com.pl>
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The timecounter code has almost nothing to do with the clocksource
code. Let it live in its own file. This will help isolate the
timecounter users from the clocksource users in the source tree.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from David Miller:

 1) Fix double SKB free in bluetooth 6lowpan layer, from Jukka Rissanen.

 2) Fix receive checksum handling in enic driver, from Govindarajulu
    Varadarajan.

 3) Fix NAPI poll list corruption in virtio_net and caif_virtio, from
    Herbert Xu.  Also, add code to detect drivers that have this mistake
    in the future.

 4) Fix doorbell endianness handling in mlx4 driver, from Amir Vadai.

 5) Don't clobber IP6CB() before xfrm6_policy_check() is called in TCP
    input path,f rom Nicolas Dichtel.

 6) Fix MPLS action validation in openvswitch, from Pravin B Shelar.

 7) Fix double SKB free in vxlan driver, also from Pravin.

 8) When we scrub a packet, which happens when we are switching the
    context of the packet (namespace, etc.), we should reset the
    secmark.  From Thomas Graf.

 9) ->ndo_gso_check() needs to do more than return true/false, it also
    has to allow the driver to clear netdev feature bits in order for
    the caller to be able to proceed properly.  From Jesse Gross.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
  genetlink: A genl_bind() to an out-of-range multicast group should not WARN().
  netlink/genetlink: pass network namespace to bind/unbind
  ne2k-pci: Add pci_disable_device in error handling
  bonding: change error message to debug message in __bond_release_one()
  genetlink: pass multicast bind/unbind to families
  netlink: call unbind when releasing socket
  netlink: update listeners directly when removing socket
  genetlink: pass only network namespace to genl_has_listeners()
  netlink: rename netlink_unbind() to netlink_undo_bind()
  net: Generalize ndo_gso_check to ndo_features_check
  net: incorrect use of init_completion fixup
  neigh: remove next ptr from struct neigh_table
  net: xilinx: Remove unnecessary temac_property in the driver
  net: phy: micrel: use generic config_init for KSZ8021/KSZ8031
  net/core: Handle csum for CHECKSUM_COMPLETE VXLAN forwarding
  openvswitch: fix odd_ptr_err.cocci warnings
  Bluetooth: Fix accepting connections when not using mgmt
  Bluetooth: Fix controller configuration with HCI_QUIRK_INVALID_BDADDR
  brcmfmac: Do not crash if platform data is not populated
  ipw2200: select CFG80211_WEXT
  ...

Merge tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fix from Shuah Khan:
 "Fix exec test compile warnings"

* tag 'linux-kselftest-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/exec: Use %zu to format size_t

Pull CIFS fixes from Steve French:
 "A set of three minor cifs fixes"

* 'for-linus' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: make new inode cache when file type is different
  Fix signed/unsigned pointer warning
  Convert MessageID in smb2_hdr to LE

Pull UDF & isofs fixes from Jan Kara:
 "A couple of UDF fixes of handling of corrupted media and one iso9660
  fix of the same"

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: Reduce repeated dereferences
  udf: Check component length before reading it
  udf: Check path length when reading symlink
  udf: Verify symlink size before loading it
  udf: Verify i_size when loading inode
  isofs: Fix unchecked printing of ER records

Pull power management and ACPI material from Rafael J Wysocki:
 "These are fixes (operating performance points library, cpufreq-dt
  driver, cpufreq core, ACPI backlight, cpupower tool), cleanups
  (cpuidle), new processor IDs for the RAPL (Running Average Power
  Limit) power capping driver, and a modification of the generic power
  domains framework allowing modular drivers to call one of its helper
  functions.

  Specifics:

   - Fix for a potential NULL pointer dereference in the cpufreq core
     due to an initialization race condition (Ethan Zhao).

   - Fixes for abuse of the OPP (Operating Performance Points) API
     related to RCU and other minor issues in the OPP library and the
     cpufreq-dt driver (Dmitry Torokhov).

   - cpuidle governors cleanup making them measure idle duration in a
     better way without using the CPUIDLE_FLAG_TIME_INVALID flag which
     allows that flag to be dropped from the ACPI cpuidle driver and
     from the core too (Len Brown).

   - New ACPI backlight blacklist entries for Samsung machines without a
     working native backlight interface that need to use the ACPI
     backlight instead (Aaron Lu).

   - New CPU IDs of future Intel Xeon CPUs for the Intel RAPL power
     capping driver (Jacob Pan).

   - Generic power domains framework modification to export the
     of_genpd_get_from_provider() function to modular drivers that will
     allow future driver modifications to be based on the mainline (Amit
     Daniel Kachhap).

   - Two fixes for the cpupower tool (Michal Privoznik, Prarit
     Bhargava)"

* tag 'pm+acpi-3.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: Add some Samsung models to disable_native_backlight list
  tools / cpupower: Fix no idle state information return value
  tools / cpupower: Correctly detect if running as root
  cpufreq: fix a NULL pointer dereference in __cpufreq_governor()
  cpufreq-dt: defer probing if OPP table is not ready
  PM / OPP: take RCU lock in dev_pm_opp_get_opp_count
  PM / OPP: fix warning in of_free_opp_table()
  PM / OPP: add some lockdep annotations
  powercap / RAPL: add IDs for future Xeon CPUs
  PM / Domains: Export of_genpd_get_from_provider function
  cpuidle / ACPI: remove unused CPUIDLE_FLAG_TIME_INVALID
  cpuidle: ladder: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID
  cpuidle: menu: Better idle duration measurement without using CPUIDLE_FLAG_TIME_INVALID

Users can request to bind to arbitrary multicast groups, so warning
when the requested group number is out of range is not appropriate.

And with the warning removed, and the 'err' variable properly given
an initial value, we can remove 'found' altogether.
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull spi fixes from Mark Brown:
 "A few driver specific fixes here, the DMA burst size increase in the
  spfi driver is a fix to make the hardware happier in some situations"

* tag 'spi-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: img-spfi: Increase DMA burst size
  spi: img-spfi: Enable controller before starting TX DMA
  spi: sh-msiof: Add runtime PM lock in initializing

Pull one regulator fix from Mark Brown:
 "One fix here, a fix for the voltage mapping on one of the s2mps11
  regulators which broke systems using it including apparently the
  Gear 2 smartwatches"

* tag 'regulator-v3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: s2mps11: Fix dw_mmc failure on Gear 2

Pull one MMC fix from Ulf Hansson:
 "MMC core:

   - Fix selection of buswidth for mmc hosts supporting 1-bit only"

* tag 'mmc-v3.19-2' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: core: stop trying to switch width when only one bit is supported

Pull thermal management updates from Zhang Rui:
 "First of all, the most important change is the thermal cpu cooling
  fixes.  The major fix here is to have proper sequencing between
  cpufreq layer and thermal cpu cooling registration.  A take away of
  this fix is an improvement in the thermal drivers code.  Thermal
  drivers that require cpu cooling do not need to check for cpufreq
  layer.  The requirement now is to propagate the error code, if any,
  while registering cpu cooling device.  Thanks to Viresh for
  implementing the required CPUfreq changes.

  Second, a new driver is introduced for int340x processor thermal
  device.  Given that int340x thermal is disabled by default, and this
  processor thermal device is only available on limited platforms, plus
  the driver does nothing but exposes some thermal limitation
  information for user space to use, thus I think it is safe to include
  it in this pull request after missing 3.19-rc2.

  Specifics:

   - Thermal cpu cooling fixes and cleanups.

   - introduce INT340X processor thermal reporting device driver.

   - several small fixes and cleanups for int340x thermal drivers"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (43 commits)
  Thermal/int340x/int3403: Free acpi notification handler
  Thermal/int340x/processor_thermal: Fix memory leak
  Thermal/int340x/int3403: Fix memory leak
  thermal: int340x: Introduce processor reporting device
  thermal: int340x_thermal: drop owner assignment from platform_drivers
  thermal: drop owner assignment from platform_drivers
  thermal: cpu_cooling: document node in struct cpufreq_cooling_device
  thermal/powerclamp: add ids for future xeon cpus
  Thermal/int340x: Handle properly the case when _trt or _art acpi entry is missing
  thermal: cpu_cooling: return ERR_PTR() for !CPU_THERMAL or !THERMAL_OF
  thermal: cpu_cooling: small memory leak on error
  thermal: ti-soc-thermal: Do not print error message in the EPROBE_DEFER case
  thermal: db8500: Do not print error message in the EPROBE_DEFER case
  thermal: imx: Do not print error message in the EPROBE_DEFER case
  thermal: Fix cdev registration with THERMAL_NO_LIMIT on 64bit
  drivers: thermal: Remove ARCH_HAS_BANDGAP dependency for samsung
  thermal:core:fix: Check return code of the ->get_max_state() callback
  thermal: cpu_cooling: update copyright tags
  thermal: cpu_cooling: Use cpufreq_dev->freq_table for finding level/freq
  thermal: cpu_cooling: Store frequencies in descending order
  ...

Commit 2457aec6 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.

Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks.  This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.

Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree.  Just make
sure that the radix tree gets only the sane subset of the mask (e.g.  do
not pass __GFP_WRITE).

Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>