- 21 May, 2015 20 commits
-
-
Shradha Shah authored
Added function efx_ef10_get_vf_index to store the vf_index in nic_data during probe vf_index is needed in future patches to access a particular VF in the VF data structure. Moved efx_ef10_probe_pf and efx_ef10_probe_vf in order to used efx_ef10_remove Signed-off-by:
Shradha Shah <sshah@solarflare.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Shradha Shah authored
MC_CMD_SET_MAC is privileged and can only by called by the link control function. This patch adds efx_ef10_mac_reconfigure_vf which avoids the call to MC_CMD_SET_MAC by the Virtual function Signed-off-by:
-
Shradha Shah authored
Signed-off-by:
-
Shradha Shah authored
There is one primary function per adaptor, one link control function per port and the rest as categorised as general. This patch adds privileges to the MCDI commands based on which functions are allowed to call them. Signed-off-by:
-
Vineet Gupta authored
This also matches with the sibling call netdev_alloc_skb_ip_align() made in rx fast path. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Joe Perches authored
30 usecs (or really, 1 jiffy) can go by pretty fast. Move the set of the timeout immediately before the loop. Remove the unnecessary max(1ul, usecs_to_jiffies(30)) as usecs_to_jiffies with a non-zero constant is guaranteed to be non-zero. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
David S. Miller authored
Simon Horman says: ==================== rocker: transaction fixes this series addresses what appear to be errors in the handling of prepare and then commit transactions in the rocker driver. In all cases the problem is that data structures visible outside of the transaction are modified during the prepare phase. In the case of the first two patches this results in the kernel reporting a BUG. I have noted test-cases in the change logs. The third patch is also a bug fix, as noted by Toshiaki Makita, however I have not been able to reliably reproduce the problem and thus have not provided a test case. The last patch is a correctness fix that does not fix a bug that manifests as far as I can tell. Changes: v3->v4 * All patches - Add Jiri Pirko's ack * "rocker: do not make neighbour entry changes when preparing transactions" - Setting of entry values in all transaction phases as suggested by Toshiaki Makita * "rocker: make rocker_port_internal_vlan_id_{get,put}() non-transactional" - Remove Fixes tag as I believe this is a correctness rather than a bug fix Changes: v2->v3 * "rocker: do not make neighbour entry changes when preparing transactions" - Correct inverted logic - Added ack from Scott Feldman Changes: v1->v2 * "rocker: do not make neighbour entry changes when preparing transactions" - Revised changelog to reflect information from Toshiaki Makita that there is a bug that can manifest - Update address and ttl regardless of the value of the transaction state * All other patches - Added acks from Scott Feldman ==================== Signed-off-by: -
Simon Horman authored
The motivation for this is that rocker_port_internal_vlan_id_{get,put} appear to only partially implement the transaction model: memory allocation and freeing is transactional, but hash and bitmap manipulation is not. The latter could be fixed, however, as it is not currently exercised due to trans always being SWITCHDEV_TRANS_NONE it seems cleaner to make rocker_port_internal_vlan_id_get non-transactional. This problem was introduced by c4f20321 ("rocker: support prepare-commit transaction model"). Found by inspection. I do not believe that this change should have any run-time effect. Acked-by:Scott Feldman <sfeldma@gmail.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Simon Horman <simon.horman@netronome.com> Signed-off-by:
-
Simon Horman authored
rocker_port_ipv4_nh() and in turn rocker_port_ipv4_neigh() may be be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_obj_set() via fib_table_insert(). The first time that rocker_port_ipv4_nh() is called, with trans == SWITCHDEV_TRANS_PREPARE, _rocker_neigh_add() adds a new entry to the neigh table. And the second time rocker_port_ipv4_nh() is called, with trans == SWITCHDEV_TRANS_COMMIT, that entry is found. This causes rocker_port_ipv4_nh() to believe it is not adding an entry and thus it frees "entry", which is still present in rocker driver's neigh table. This problem does not appear to affect deletion as my analysis is that deletion is always performed with trans == SWITCHDEV_TRANS_NONE. For completeness _rocker_neigh_{add,del,prepare} are updated not to manipulate fib table entries if trans == SWITCHDEV_TRANS_PREPARE. Fixes: c4f20321 ("rocker: support prepare-commit transaction model") Reported-by:Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
-
Simon Horman authored
rocker_port_fdb_flush() may be called be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via switchdev_port_obj_add(). Adding the new entry to the FDB table when trans == SWITCHDEV_TRANS_PREPARE may result in a memory leak because when trans == SWITCHDEV_TRANS_PREPARE rocker_flow_tbl_bridge() will allocate memory when called via rocker_port_fdb_learn(). However, when trans == SWITCHDEV_TRANS_COMMIT the presence of the FDB entry in the FDB table causes rocker_port_fdb() to set the ROCKER_OP_FLAG_REFRESH flag which results in rocker_port_fdb_learn() skipping the call to rocker_flow_tbl_bridge() which would free the memory allocated by it when trans == SWITCHDEV_TRANS_PREPARE. ip link add br0 type bridge ip link set up dev eth0 ip link set dev eth0 master br0 bridge fdb add 52:54:00:12:35:08 dev eth0 bridge fdb add 52:54:00:12:35:09 dev eth0 [ 2.600730] ------------[ cut here ]------------ [ 2.601002] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4369! [ 2.601373] invalid opcode: 0000 [#1] SMP [ 2.601963] Modules linked in: [ 2.602355] CPU: 0 PID: 64 Comm: bridge Not tainted 4.1.0-rc3-01048-g6d0f50c50211-dirty #1075 [ 2.602721] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014 [ 2.602721] task: ffff880019facef0 ti: ffff88001f96c000 task.ti: ffff88001f96c000 [ 2.602721] RIP: 0010:[<ffffffff811f1470>] [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160 [ 2.602721] RSP: 0018:ffff88001f96fa98 EFLAGS: 00000212 [ 2.602721] RAX: ffff880019d4fa68 RBX: ffff88001f96fb18 RCX: 0000000000000000 [ 2.602721] RDX: ffff880019d4f000 RSI: ffff88001f96fb18 RDI: ffff880019d4f000 [ 2.602721] RBP: 0000000000000001 R08: 0000000000000000 R09: ffff88001f904620 [ 2.602721] R10: ffff88001f96fb60 R11: ffff880019e9d100 R12: ffff88001f96fb18 [ 2.602721] R13: ffff880019d4f680 R14: ffff88001f904610 R15: ffff8800198f7b80 [ 2.602721] FS: 00007f3eee917700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000 [ 2.602721] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.602721] CR2: 00007f3eee4a15cb CR3: 000000001f933000 CR4: 00000000000006b0 [ 2.602721] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.602721] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 2.602721] Stack: [ 2.602721] 0000000000000000 ffff88001f96fb18 ffff880019d4f000 ffff88001f96fb18 [ 2.602721] ffff880019d4f000 ffffffff81332105 ffff88001f96fb50 ffffffff814464c0 [ 2.602721] ffff88001f96fb18 ffff88001f904600 ffff880019d4f000 ffffffff813326e5 [ 2.602721] Call Trace: [ 2.602721] [<ffffffff81332105>] ? __switchdev_port_obj_add+0x25/0x90 [ 2.602721] [<ffffffff813326e5>] ? switchdev_port_obj_add+0x25/0xc0 [ 2.602721] [<ffffffff813327b1>] ? switchdev_port_fdb_add+0x31/0x40 [ 2.602721] [<ffffffff8123911f>] ? rtnl_fdb_add+0xff/0x1e0 [ 2.602721] [<ffffffff81237d8e>] ? rtnetlink_rcv_msg+0x7e/0x250 [ 2.602721] [<ffffffff8121d1ce>] ? __skb_recv_datagram+0xfe/0x4b0 [ 2.602721] [<ffffffff81237d10>] ? rtnetlink_rcv+0x30/0x30 [ 2.602721] [<ffffffff81247958>] ? netlink_rcv_skb+0xa8/0xd0 [ 2.602721] [<ffffffff81237cff>] ? rtnetlink_rcv+0x1f/0x30 [ 2.602721] [<ffffffff81247220>] ? netlink_unicast+0x150/0x200 [ 2.602721] [<ffffffff81247714>] ? netlink_sendmsg+0x374/0x3e0 [ 2.602721] [<ffffffff8120f8df>] ? sock_sendmsg+0xf/0x30 [ 2.602721] [<ffffffff8120ffd3>] ? ___sys_sendmsg+0x1f3/0x200 [ 2.602721] [<ffffffff812100e5>] ? ___sys_recvmsg+0x105/0x140 [ 2.602721] [<ffffffff810a36f0>] ? SyS_readahead+0x90/0x90 [ 2.602721] [<ffffffff81098dfd>] ? filemap_map_pages+0x1ed/0x210 [ 2.602721] [<ffffffff810b77fc>] ? handle_mm_fault+0x5fc/0xe50 [ 2.602721] [<ffffffff81210ef9>] ? __sys_sendmsg+0x39/0x70 [ 2.602721] [<ffffffff8133ce17>] ? system_call_fastpath+0x12/0x6a [ 2.602721] Code: b7 8f a0 06 00 00 48 83 bf 88 06 00 00 00 74 1d 48 83 c4 08 89 ee 4c 89 ef 5b 5d 41 5c 41 5d 0f b7 c9 45 31 c0 e9 51 db ff ff 90 <0f> 0b b8 ea ff ff ff e9 cf fe ff ff 0f 1f 40 00 41 57 41 56 b9 [ 2.602721] RIP [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160 [ 2.602721] RSP <ffff88001f96fa98> [ 2.615848] ---[ end trace 4f7b4f1c98077108 ]--- The above is resolved by not adding the new FDB entry to the FDB table if trans == SWITCHDEV_TRANS_PREPARE. For symmetry this patch also skips deleting FDB entries from the FDB table trans == SWITCHDEV_TRANS_PREPARE. However, my analysis is that this never occurs as trans is always SWITCHDEV_TRANS_NONE when removing FDB entries. Fixes: c4f20321 ("rocker: support prepare-commit transaction model") Acked-by:
-
Simon Horman authored
rocker_port_fdb_flush() is called by rocker_port_stp_update() which in turn may be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via br_set_state(). When rocker_port_fdb_flush() is called with trans == SWITCHDEV_TRANS_PREPARE it calls rocker_port_fdb_learn() for each entry in the FDB table which in turn calls rocker_flow_tbl_bridge() which will allocate memory using rocker_port_kzalloc(). rocker_port_fdb_learn() will then remove the entry from the FDB table. Then when rocker_port_fdb_learn() is called with trans == SWITCHDEV_TRANS_PREPARE no calls are made to rocker_port_fdb_learn() because there are no longer any entries present in the FDB table. Thus the memory previously allocated by rocker_port_fdb_learn() is leaked resulting in the kernel BUG() below. Furthermore, it looks like the driver ends up with an incorrect view of the fdb table as the FDB entries are purged from the driver's table but not the hardware's table. ip link add br0 type bridge ip link set up dev eth0 sleep 1 ip link set dev eth0 master br0 [ 3.704360] ------------[ cut here ]------------ [ 3.704611] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4289! [ 3.704962] invalid opcode: 0000 [#1] SMP [ 3.705537] Modules linked in: [ 3.705919] CPU: 0 PID: 63 Comm: ip Not tainted 4.1.0-rc3-01046-gb9fbe709 #1044 [ 3.706191] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014 [ 3.706820] task: ffff880019f70150 ti: ffff88001f92c000 task.ti: ffff88001f92c000 [ 3.707138] RIP: 0010:[<ffffffff811f0080>] [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0 [ 3.707990] RSP: 0018:ffff88001f92f808 EFLAGS: 00000212 [ 3.708200] RAX: ffff880019d4fa68 RBX: ffff880019d4f000 RCX: 0000000000000000 [ 3.708471] RDX: 000000000000000c RSI: ffff88001f92f890 RDI: ffff880019d4f680 [ 3.708740] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000004 [ 3.708999] R10: ffff880000034024 R11: 0000000000000000 R12: ffff88001f92f890 [ 3.709276] R13: ffff88001f8f1c00 R14: 000000000000000b R15: 0000000000000000 [ 3.709303] FS: 00007f8ab66bd700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000 [ 3.709303] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.709303] CR2: 0000000000654988 CR3: 000000001f8f3000 CR4: 00000000000006b0 [ 3.709303] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.709303] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 3.709303] Stack: [ 3.709303] ffff88001f8f1c00 000000000000000b ffff88001f92f890 ffff880019d4f000 [ 3.709303] ffff88001f92f890 ffffffff813332f5 ffff88001f92f880 0000000000000000 [ 3.709303] ffff88001f92f890 0000000000000001 ffff880019d4f000 ffffffff81333627 [ 3.709303] Call Trace: [ 3.709303] [<ffffffff813332f5>] ? __switchdev_port_attr_set+0x25/0x90 [ 3.709303] [<ffffffff81333627>] ? switchdev_port_attr_set+0x27/0x120 [ 3.709303] [<ffffffff81318e86>] ? br_set_state+0x36/0x50 [ 3.709303] [<ffffffff8131795c>] ? br_add_if+0x37c/0x400 [ 3.709303] [<ffffffff81238ce1>] ? do_setlink+0x7e1/0x800 [ 3.709303] [<ffffffff8111f980>] ? radix_tree_lookup_slot+0x10/0x30 [ 3.709303] [<ffffffff81136fba>] ? nla_parse+0xaa/0x110 [ 3.709303] [<ffffffff81239c98>] ? rtnl_newlink+0x548/0x870 [ 3.709303] [<ffffffff8111f900>] ? __radix_tree_lookup+0x40/0xb0 [ 3.709303] [<ffffffff81136f3e>] ? nla_parse+0x2e/0x110 [ 3.709303] [<ffffffff81237d7e>] ? rtnetlink_rcv_msg+0x7e/0x250 [ 3.709303] [<ffffffff8121d1be>] ? __skb_recv_datagram+0xfe/0x4b0 [ 3.709303] [<ffffffff81237d00>] ? rtnetlink_rcv+0x30/0x30 [ 3.709303] [<ffffffff81247948>] ? netlink_rcv_skb+0xa8/0xd0 [ 3.709303] [<ffffffff81237cef>] ? rtnetlink_rcv+0x1f/0x30 [ 3.709303] [<ffffffff81247210>] ? netlink_unicast+0x150/0x200 [ 3.709303] [<ffffffff81247704>] ? netlink_sendmsg+0x374/0x3e0 [ 3.709303] [<ffffffff8120f8cf>] ? sock_sendmsg+0xf/0x30 [ 3.709303] [<ffffffff8120ffc3>] ? ___sys_sendmsg+0x1f3/0x200 [ 3.709303] [<ffffffff812100d5>] ? ___sys_recvmsg+0x105/0x140 [ 3.709303] [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90 [ 3.709303] [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90 [ 3.709303] [<ffffffff81217b7d>] ? skb_dequeue+0x4d/0x60 [ 3.709303] [<ffffffff81217bb0>] ? skb_queue_purge+0x20/0x30 [ 3.709303] [<ffffffff810ebdcf>] ? __inode_wait_for_writeback+0x5f/0xb0 [ 3.709303] [<ffffffff810648b0>] ? autoremove_wake_function+0x30/0x30 [ 3.709303] [<ffffffff81210ee9>] ? __sys_sendmsg+0x39/0x70 [ 3.709303] [<ffffffff8133e097>] ? system_call_fastpath+0x12/0x6a [ 3.709303] Code: bb 90 06 00 00 48 c7 04 24 00 00 00 00 45 31 c9 45 31 c0 48 c7 c1 c0 b7 1e 81 89 ea e8 da da ff ff eb 95 0f 1f 84 00 00 00 00 00 <0f> 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 83 fe 15 75 [ 3.709303] RIP [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0 [ 3.709303] RSP <ffff88001f92f808> [ 3.721409] ---[ end trace b7481fcb7cb032aa ]--- Segmentation fault Fixes: c4f20321 ("rocker: support prepare-commit transaction model") Acked-by:
-
Joe Perches authored
Use the generic mechanism to declare a bitmap instead of unsigned long. Signed-off-by:
-
David S. Miller authored
Alexei Starovoitov says: ==================== bpf: introduce bpf_tail_call() helper introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. Use cases: - simplify complex programs - dispatch into other programs (for example: index in jump table can be syscall number or network protocol) - build dynamic chains of programs The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. patch 1 - support bpf_tail_call() in interpreter patch 2 - support in x64 JIT We've discussed what's neccessary to support it in arm64/s390 JITs and it looks fine. patch 3 - sample example for tracing patch 4 - sample example for networking More details in every patch. This set went through several iterations of reviews/fixes and older attempts can be seen: https://git.kernel.org/cgit/linux/kernel/git/ast/bpf.git/log/?h=tail_call_v[123456] - tail_call_v1 does it without touching JITs but introduces overhead for all programs that don't use this helper function. - tail_call_v2 still has some overhead and x64 JIT does full stack unwind (prologue skipping optimization wasn't there) - tail_call_v3 reuses 'call' instruction encoding and has interpreter overhead for every normal call - tail_call_v4 fixes above architectural shortcomings and v5,v6 fix few more bugs This last tail_call_v6 approach seems to be the best. ==================== Signed-off-by: -
Alexei Starovoitov authored
Usage: $ sudo ./sockex3 IP src.port -> dst.port bytes packets 127.0.0.1.42010 -> 127.0.0.1.12865 1568 8 127.0.0.1.59526 -> 127.0.0.1.33778 11422636 173070 127.0.0.1.33778 -> 127.0.0.1.59526 11260224828 341974 127.0.0.1.12865 -> 127.0.0.1.42010 1832 12 IP src.port -> dst.port bytes packets 127.0.0.1.42010 -> 127.0.0.1.12865 1568 8 127.0.0.1.59526 -> 127.0.0.1.33778 23198092 351486 127.0.0.1.33778 -> 127.0.0.1.59526 22972698518 698616 127.0.0.1.12865 -> 127.0.0.1.42010 1832 12 this example is similar to sockex2 in a way that it accumulates per-flow statistics, but it does packet parsing differently. sockex2 inlines full packet parser routine into single bpf program. This sockex3 example have 4 independent programs that parse vlan, mpls, ip, ipv6 and one main program that starts the process. bpf_tail_call() mechanism allows each program to be small and be called on demand potentially multiple times, so that many vlan, mpls, ip in ip, gre encapsulations can be parsed. These and other protocol parsers can be added or removed at runtime. TLVs can be parsed in similar manner. Note, tail_call_cnt dynamic check limits the number of tail calls to 32. Signed-off-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Alexei Starovoitov authored
kprobe example that demonstrates how future seccomp programs may look like. It attaches to seccomp_phase1() function and tail-calls other BPF programs depending on syscall number. Existing optimized classic BPF seccomp programs generated by Chrome look like: if (sd.nr < 121) { if (sd.nr < 57) { if (sd.nr < 22) { if (sd.nr < 7) { if (sd.nr < 4) { if (sd.nr < 1) { check sys_read } else { if (sd.nr < 3) { check sys_write and sys_open } else { check sys_close } } } else { } else { } else { } else { } else { } the future seccomp using native eBPF may look like: bpf_tail_call(&sd, &syscall_jmp_table, sd.nr); which is simpler, faster and leaves more room for per-syscall checks. Usage: $ sudo ./tracex5 <...>-366 [001] d... 4.870033: : read(fd=1, buf=00007f6d5bebf000, size=771) <...>-369 [003] d... 4.870066: : mmap <...>-369 [003] d... 4.870077: : syscall=110 (one of get/set uid/pid/gid) <...>-369 [003] d... 4.870089: : syscall=107 (one of get/set uid/pid/gid) sh-369 [000] d... 4.891740: : read(fd=0, buf=00000000023d1000, size=512) sh-369 [000] d... 4.891747: : write(fd=1, buf=00000000023d3000, size=512) sh-369 [000] d... 4.891747: : read(fd=1, buf=00000000023d3000, size=512) Signed-off-by: -
Alexei Starovoitov authored
bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue, so the callee program reuses the same stack. The logic can be roughly expressed in C like: u32 tail_call_cnt; void *jumptable[2] = { &&label1, &&label2 }; int bpf_prog1(void *ctx) { label1: ... } int bpf_prog2(void *ctx) { label2: ... } int bpf_prog1(void *ctx) { ... if (tail_call_cnt++ < MAX_TAIL_CALL_CNT) goto *jumptable[index]; ... and pass my 'ctx' to callee ... ... fall through if no entry in jumptable ... } Note that 'skip current program epilogue and next program prologue' is an optimization. Other JITs don't have to do it the same way. >From safety point of view it's valid as well, since programs always initialize the stack before use, so any residue in the stack left by the current program is not going be read. The same verifier checks are done for the calls from the kernel into all bpf programs. Signed-off-by: -
Alexei Starovoitov authored
introduce bpf_tail_call(ctx, &jmp_table, index) helper function which can be used from BPF programs like: int bpf_prog(struct pt_regs *ctx) { ... bpf_tail_call(ctx, &jmp_table, index); ... } that is roughly equivalent to: int bpf_prog(struct pt_regs *ctx) { ... if (jmp_table[index]) return (*jmp_table[index])(ctx); ... } The important detail that it's not a normal call, but a tail call. The kernel stack is precious, so this helper reuses the current stack frame and jumps into another BPF program without adding extra call frame. It's trivially done in interpreter and a bit trickier in JITs. In case of x64 JIT the bigger part of generated assembler prologue is common for all programs, so it is simply skipped while jumping. Other JITs can do similar prologue-skipping optimization or do stack unwind before jumping into the next program. bpf_tail_call() arguments: ctx - context pointer jmp_table - one of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table index - index in the jump table Since all BPF programs are idenitified by file descriptor, user space need to populate the jmp_table with FDs of other BPF programs. If jmp_table[index] is empty the bpf_tail_call() doesn't jump anywhere and program execution continues as normal. New BPF_MAP_TYPE_PROG_ARRAY map type is introduced so that user space can populate this jmp_table array with FDs of other bpf programs. Programs can share the same jmp_table array or use multiple jmp_tables. The chain of tail calls can form unpredictable dynamic loops therefore tail_call_cnt is used to limit the number of calls and currently is set to 32. Use cases: Acked-by:Daniel Borkmann <daniel@iogearbox.net> ========== - simplify complex programs by splitting them into a sequence of small programs - dispatch routine For tracing and future seccomp the program may be triggered on all system calls, but processing of syscall arguments will be different. It's more efficient to implement them as: int syscall_entry(struct seccomp_data *ctx) { bpf_tail_call(ctx, &syscall_jmp_table, ctx->nr /* syscall number */); ... default: process unknown syscall ... } int sys_write_event(struct seccomp_data *ctx) {...} int sys_read_event(struct seccomp_data *ctx) {...} syscall_jmp_table[__NR_write] = sys_write_event; syscall_jmp_table[__NR_read] = sys_read_event; For networking the program may call into different parsers depending on packet format, like: int packet_parser(struct __sk_buff *skb) { ... parse L2, L3 here ... __u8 ipproto = load_byte(skb, ... offsetof(struct iphdr, protocol)); bpf_tail_call(skb, &ipproto_jmp_table, ipproto); ... default: process unknown protocol ... } int parse_tcp(struct __sk_buff *skb) {...} int parse_udp(struct __sk_buff *skb) {...} ipproto_jmp_table[IPPROTO_TCP] = parse_tcp; ipproto_jmp_table[IPPROTO_UDP] = parse_udp; - for TC use case, bpf_tail_call() allows to implement reclassify-like logic - bpf_map_update_elem/delete calls into BPF_MAP_TYPE_PROG_ARRAY jump table are atomic, so user space can build chains of BPF programs on the fly Implementation details: ======================= - high performance of bpf_tail_call() is the goal. It could have been implemented without JIT changes as a wrapper on top of BPF_PROG_RUN() macro, but with two downsides: . all programs would have to pay performance penalty for this feature and tail call itself would be slower, since mandatory stack unwind, return, stack allocate would be done for every tailcall. . tailcall would be limited to programs running preempt_disabled, since generic 'void *ctx' doesn't have room for 'tail_call_cnt' and it would need to be either global per_cpu variable accessed by helper and by wrapper or global variable protected by locks. In this implementation x64 JIT bypasses stack unwind and jumps into the callee program after prologue. - bpf_prog_array_compatible() ensures that prog_type of callee and caller are the same and JITed/non-JITed flag is the same, since calling JITed program from non-JITed is invalid, since stack frames are different. Similarly calling kprobe type program from socket type program is invalid. - jump table is implemented as BPF_MAP_TYPE_PROG_ARRAY to reuse 'map' abstraction, its user space API and all of verifier logic. It's in the existing arraymap.c file, since several functions are shared with regular array map. Signed-off-by:
-
Daniel Borkmann authored
Reduce ifdef pollution slightly, no functional change. We can simply remove the extra alternative definition of handle_ing() and nf_ingress(). Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Eric Dumazet authored
In commit 8e4d980a ("tcp: fix behavior for epoll edge trigger") we fixed a possible hang of TCP sockets under memory pressure, by allowing sk_stream_alloc_skb() to use sk_forced_mem_schedule() if no packet is in socket write queue. It turns out there are other cases where we want to force memory schedule : tcp_fragment() & tso_fragment() need to split a big TSO packet into two smaller ones. If we block here because of TCP memory pressure, we can effectively block TCP socket from sending new data. If no further ACK is coming, this hang would be definitive, and socket has no chance to effectively reduce its memory usage. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Erik Kline authored
[1] When entering NUD_PROBE state via neigh_update(), perhaps received from userspace, correctly (re)initialize the probes count to zero. This is useful for forcing revalidation of a neighbor (for example if the host is attempting to do DNA [IPv4 4436, IPv6 6059]). [2] Notify listeners when a neighbor goes into NUD_PROBE state. By sending notifications on entry to NUD_PROBE state listeners get more timely warnings of imminent connectivity issues. The current notifications on entry to NUD_STALE have somewhat limited usefulness: NUD_STALE is a perfectly normal state, as is NUD_DELAY, whereas notifications on entry to NUD_FAILURE come after a neighbor reachability problem has been confirmed (typically after three probes). Signed-off-by:Erik Kline <ek@google.com> Acked-By:
Lorenzo Colitti <lorenzo@google.com> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
- 19 May, 2015 13 commits
-
-
Andy Zhou authored
ip_do_nat() function was removed prior to kernel 3.4. Remove the unnecessary function prototype as well. Reported-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Andy Zhou <azhou@nicira.com> Signed-off-by:
-
Daniel Borkmann authored
This work as a follow-up of commit f7b3bec6 ("net: allow setting ecn via routing table") and adds RFC3168 section 6.1.1.1. fallback for outgoing ECN connections. In other words, this work adds a retry with a non-ECN setup SYN packet, as suggested from the RFC on the first timeout: [...] A host that receives no reply to an ECN-setup SYN within the normal SYN retransmission timeout interval MAY resend the SYN and any subsequent SYN retransmissions with CWR and ECE cleared. [...] Schematic client-side view when assuming the server is in tcp_ecn=2 mode, that is, Linux default since 2009 via commit 255cac91 ("tcp: extend ECN sysctl to allow server-side only ECN"): 1) Normal ECN-capable path: SYN ECE CWR -----> <----- SYN ACK ECE ACK -----> 2) Path with broken middlebox, when client has fallback: SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN -----> <----- SYN ACK ACK -----> In case we would not have the fallback implemented, the middlebox drop point would basically end up as: SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) SYN ECE CWR ----X crappy middlebox drops packet (timeout, rtx) In any case, it's rather a smaller percentage of sites where there would occur such additional setup latency: it was found in end of 2014 that ~56% of IPv4 and 65% of IPv6 servers of Alexa 1 million list would negotiate ECN (aka tcp_ecn=2 default), 0.42% of these webservers will fail to connect when trying to negotiate with ECN (tcp_ecn=1) due to timeouts, which the fallback would mitigate with a slight latency trade-off. Recent related paper on this topic: Brian Trammell, Mirja Kühlewind, Damiano Boppart, Iain Learmonth, Gorry Fairhurst, and Richard Scheffenegger: "Enabling Internet-Wide Deployment of Explicit Congestion Notification." Proc. PAM 2015, New York. http://ecn.ethz.ch/ecn-pam15.pdf Thus, when net.ipv4.tcp_ecn=1 is being set, the patch will perform RFC3168, section 6.1.1.1. fallback on timeout. For users explicitly not wanting this which can be in DC use case, we add a net.ipv4.tcp_ecn_fallback knob that allows for disabling the fallback. tp->ecn_flags are not being cleared in tcp_ecn_clear_syn() on output, but rather we let tcp_ecn_rcv_synack() take that over on input path in case a SYN ACK ECE was delayed. Thus a spurious SYN retransmission will not prevent ECN being negotiated eventually in that case. Reference: https://www.ietf.org/proceedings/92/slides/slides-92-iccrg-1.pdf Reference: https://www.ietf.org/proceedings/89/slides/slides-89-tsvarea-1.pdfSigned-off-by:
Mirja Kühlewind <mirja.kuehlewind@tik.ee.ethz.ch> Signed-off-by:
Brian Trammell <trammell@tik.ee.ethz.ch> Cc: Eric Dumazet <edumazet@google.com> Cc: Dave That <dave.taht@gmail.com> Acked-by:
-
David S. Miller authored
Hariprasad Shenai says: ==================== cxgb4: Remove dead code and replace byte-oder functions This series removes dead fn t4_read_edc and t4_read_mc, also replaces ntoh{s,l} and hton{s,l} calls with the generic byteorder. PATCH 2/2 was sent as a single PATCH, but had some byte-ordering issues in t4_read_edc and t4_read_mc function. Found that t4_read_edc and t4_read_mc is unused, so PATCH 1/2 is added to remove it. This patch series is created against net-next tree and includes patches on cxgb4 driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. ==================== Signed-off-by: -
Hariprasad Shenai authored
replace ntoh{s,l} and hton{s,l} calls with the generic byteorder in cxgb4/t4_hw.c file Signed-off-by:Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by:
-
Hariprasad Shenai authored
Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This just has a few fixes: * LED throughput trigger was crashing * fast-xmit wasn't treating QoS changes in IBSS correctly * TDLS could use the wrong channel definition * using a reserved channel context could use the wrong channel width ==================== Signed-off-by:
-
Arnd Bergmann authored
The hwmon interface in the be2net driver causes a link error when be2net is built-in while the hwmon subsystem is a loadable module: drivers/built-in.o: In function `be_probe': drivers/net/ethernet/emulex/benet/be_main.c:5761: undefined reference to `devm_hwmon_device_register_with_groups' This adds a new Kconfig symbol, following the example of multiple other drivers that have the same problem. The new CONFIG_BE2NET_HWMON will not be available when (BE2NET=y && HWMON=m) to avoid this problem. We have to also mark be_hwmon_show_temp as 'static' to ensure the compiler can optimize out all the unused code. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: 29e9122b ("be2net: Export board temperature using hwmon-sysfs interface.") Signed-off-by:
-
Eric B Munson authored
Currently the getsockopt() requesting the cached contents of the syn packet headers will fail silently if the caller uses a buffer that is too small to contain the requested data. Rather than fail silently and discard the headers, getsockopt() should return an error and report the required size to hold the data. Signed-off-by:
Eric B Munson <emunson@akamai.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: James Morris <jmorris@namei.org> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: Patrick McHardy <kaber@trash.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Parav Pandit authored
Signed-off-by:
Parav Pandit <parav.pandit@avagotech.com> Signed-off-by:
-
David S. Miller authored
Andy Zhou says: ==================== fragmentation ICMP Currently, we send ICMP packets when errors occur during fragmentation or de-fragmentation. However, it is a bug when sending those ICMP packets in the context of using netfilter for bridging. Those ICMP packets are only expected in the context of routing, not in bridging mode. The local stack is not involved in bridging forward decisions, thus should be not used for deciding the reverse path for those ICMP messages. This bug only affects IPV4, not in IPv6. v1->v2: restructure the patches into two patches that fix defragmentation and fragmentation respectively. A bit is add in IPCB to control whether ICMP packet should be generated for defragmentation. Fragmentation ICMP is now removed by restructuring the ip_fragment() API. v2->v3: Add droping icmp for bridging contrack users drop exporting ip_fragment() API. v3->v4: Remove unnecessary parentheses in 'return' statements v4->v5: Drop the patch that sets and checks a bit in IPCB that prevents ip_defrag to send ICMP. ==================== Signed-off-by: -
Andy Zhou authored
When bridge netfilter re-fragments an IP packet for output, all packets that can not be re-fragmented to their original input size should be silently discarded. However, current bridge netfilter output path generates an ICMP packet with 'size exceeded MTU' message for such packets, this is a bug. This patch refactors the ip_fragment() API to allow two separate use cases. The bridge netfilter user case will not send ICMP, the routing output will, as before. Signed-off-by:
-
Andy Zhou authored
users in [IP_DEFRAG_CONNTRACK_BRIDGE_IN, __IP_DEFRAG_CONNTRACK_BR_IN] should not ICMP message also. Reported-by:
-
Andy Zhou authored
Improve readability of skip ICMP for de-fragmentation expiration logic. This change will also make the logic easier to maintain when the following patches in this series are applied. Signed-off-by:
-
- 18 May, 2015 7 commits
-
-
Willem de Bruijn authored
psock_fanout tests the various fanout modes. Change the test for rollover mode to expect early rollover due to socket pressure as implemented in 2ccdbaa6 ("packet: rollover lock contention avoidance"). Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Edward Cree authored
We expect that MC_CMD_SRIOV will fail if the card has no VFs configured. So output a readable message instead of a cryptic MCDI error. Signed-off-by:
Edward Cree <ecree@solarflare.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next. Briefly speaking, cleanups and minor fixes for ipset from Jozsef Kadlecsik and Serget Popovich, more incremental updates to make br_netfilter a better place from Florian Westphal, ARP support to the x_tables mark match / target from and context Zhang Chunyu and the addition of context to know that the x_tables runs through nft_compat. More specifically, they are: 1) Fix sparse warning in ipset/ip_set_hash_ipmark.c when fetching the IPSET_ATTR_MARK netlink attribute, from Jozsef Kadlecsik. 2) Rename STREQ macro to STRNCMP in ipset, also from Jozsef. 3) Use skb->network_header to calculate the transport offset in ip_set_get_ip{4,6}_port(). From Alexander Drozdov. 4) Reduce memory consumption per element due to size miscalculation, this patch and follow up patches from Sergey Popovich. 5) Expand nomatch field from 1 bit to 8 bits to allow to simplify mtype_data_reset_flags(), also from Sergey. 6) Small clean for ipset macro trickery. 7) Fix error reporting when both ip_set_get_hostipaddr4() and ip_set_get_extensions() from per-set uadt functions. 8) Simplify IPSET_ATTR_PORT netlink attribute validation. 9) Introduce HOST_MASK instead of hardcoded 32 in ipset. 10) Return true/false instead of 0/1 in functions that return boolean in the ipset code. 11) Validate maximum length of the IPSET_ATTR_COMMENT netlink attribute. 12) Allow to dereference from ext_*() ipset macros. 13) Get rid of incorrect definitions of HKEY_DATALEN. 14) Include linux/netfilter/ipset/ip_set.h in the x_tables set match. 15) Reduce nf_bridge_info size in br_netfilter, from Florian Westphal. 16) Release nf_bridge_info after POSTROUTING since this is only needed from the physdev match, also from Florian. 17) Reduce size of ipset code by deinlining ip_set_put_extensions(), from Denys Vlasenko. 18) Oneliner to add ARP support to the x_tables mark match/target, from Zhang Chunyu. 19) Add context to know if the x_tables extension runs from nft_compat, to address minor problems with three existing extensions. 20) Correct return value in several seqfile *_show() functions in the netfilter tree, from Joe Perches. ==================== Signed-off-by: -
David S. Miller authored
Ursula Braun says: ==================== s390: network patches for net-next here are s390 related patches for net-next ==================== Signed-off-by: -
Peter Oberparleiter authored
An attempt to configure a CTC device as LCS results in the following error message: (null): Detecting a network adapter for LCS devices failed with rc=-5 (0xfffffffb) "(null)" results from access to &card->dev->dev in lcs_new_device() which is only initialized later in the function. Fix this by using &ccwgdev->dev instead which is initialized before lcs_new_device() is called. Signed-off-by:Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
-
Eugene Crosser authored
Since recently, `checkpatch.pl` advices that ENOSYS should not be used for anything other than "invalid syscall nr". This patch replaces ENOSYS return code with EOPNOTSUPP for the "unsupported function" conditions. Signed-off-by:
Eugene Crosser <Eugene.Crosser@ru.ibm.com> Signed-off-by:
-
Eugene Crosser authored
Forbid enabling IFF_PROMISC reflection to BRIDGEPORT when a role is already assigned, and forbid direct manipulation of the role when reflection mode is engaged. Reviewed-by:
Thomas Richter <tmricht@linux.vnet.ibm.com> Signed-off-by:
-
