Skip to content

L
linux
Switch branch/tag
  1. 13 May, 2020 10 commits
    • Sean Christopherson's avatar
      KVM: x86: Make return for {interrupt_nmi,smi}_allowed() a bool instead of int · 88c604b6
      Sean Christopherson authored 
      Return an actual bool for kvm_x86_ops' {interrupt_nmi}_allowed() hook to
better reflect the return semantics, and to avoid creating an even
bigger mess when the related VMX code is refactored in upcoming patches.
Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-5-sean.j.christopherson@intel.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      88c604b6
    • Sean Christopherson's avatar
      KVM: x86: Set KVM_REQ_EVENT if run is canceled with req_immediate_exit set · 8081ad06
      Sean Christopherson authored 
      Re-request KVM_REQ_EVENT if vcpu_enter_guest() bails after processing
pending requests and an immediate exit was requested.  This fixes a bug
where a pending event, e.g. VMX preemption timer, is delayed and/or lost
if the exit was deferred due to something other than a higher priority
_injected_ event, e.g. due to a pending nested VM-Enter.  This bug only
affects the !injected case as kvm_x86_ops.cancel_injection() sets
KVM_REQ_EVENT to redo the injection, but that's purely serendipitous
behavior with respect to the deferred event.

Note, emulated preemption timer isn't the only event that can be
affected, it simply happens to be the only event where not re-requesting
KVM_REQ_EVENT is blatantly visible to the guest.

Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer")
Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-4-sean.j.christopherson@intel.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      8081ad06
    • Sean Christopherson's avatar
      KVM: nVMX: Open a window for pending nested VMX preemption timer · d2060bd4
      Sean Christopherson authored 
      Add a kvm_x86_ops hook to detect a nested pending "hypervisor timer" and
use it to effectively open a window for servicing the expired timer.
Like pending SMIs on VMX, opening a window simply means requesting an
immediate exit.

This fixes a bug where an expired VMX preemption timer (for L2) will be
delayed and/or lost if a pending exception is injected into L2.  The
pending exception is rightly prioritized by vmx_check_nested_events()
and injected into L2, with the preemption timer left pending.  Because
no window opened, L2 is free to run uninterrupted.

Fixes: f4124500 ("KVM: nVMX: Fully emulate preemption timer")
Reported-by: default avatarJim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-3-sean.j.christopherson@intel.com>
[Check it in kvm_vcpu_has_events too, to ensure that the preemption
 timer is serviced promptly even if the vCPU is halted and L1 is not
 intercepting HLT. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      d2060bd4
    • Sean Christopherson's avatar
      KVM: nVMX: Preserve exception priority irrespective of exiting behavior · 6ce347af
      Sean Christopherson authored 
      Short circuit vmx_check_nested_events() if an exception is pending and
needs to be injected into L2, priority between coincident events is not
dependent on exiting behavior.  This fixes a bug where a single-step #DB
that is not intercepted by L1 is incorrectly dropped due to servicing a
VMX Preemption Timer VM-Exit.

Injected exceptions also need to be blocked if nested VM-Enter is
pending or an exception was already injected, otherwise injecting the
exception could overwrite an existing event injection from L1.
Technically, this scenario should be impossible, i.e. KVM shouldn't
inject its own exception during nested VM-Enter.  This will be addressed
in a future patch.

Note, event priority between SMI, NMI and INTR is incorrect for L2, e.g.
SMI should take priority over VM-Exit on NMI/INTR, and NMI that is
injected into L2 should take priority over VM-Exit INTR.  This will also
be addressed in a future patch.

Fixes: b6b8a145 ("KVM: nVMX: Rework interception of IRQs and NMIs")
Reported-by: default avatarJim Mattson <jmattson@google.com>
Cc: Oliver Upton <oupton@google.com>
Cc: Peter Shier <pshier@google.com>
Signed-off-by: default avatarSean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-2-sean.j.christopherson@intel.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      6ce347af
    • Cathy Avery's avatar
      KVM: SVM: Implement check_nested_events for NMI · 9c3d370a
      Cathy Avery authored 
      Migrate nested guest NMI intercept processing
to new check_nested_events.
Signed-off-by: default avatarCathy Avery <cavery@redhat.com>
Message-Id: <20200414201107.22952-2-cavery@redhat.com>
[Reorder clauses as NMIs have higher priority than IRQs; inject
 immediate vmexit as is now done for IRQ vmexits. - Paolo]
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      9c3d370a
    • Paolo Bonzini's avatar
      KVM: SVM: immediately inject INTR vmexit · 6e085cbf
      Paolo Bonzini authored 
      We can immediately leave SVM guest mode in svm_check_nested_events
now that we have the nested_run_pending mechanism.  This makes
things easier because we can run the rest of inject_pending_event
with GIF=0, and KVM will naturally end up requesting the next
interrupt window.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      6e085cbf
    • Paolo Bonzini's avatar
      KVM: SVM: leave halted state on vmexit · 38c0b192
      Paolo Bonzini authored 
      Similar to VMX, we need to leave the halted state when performing a vmexit.
Failure to do so will cause a hang after vmexit.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      38c0b192
    • Paolo Bonzini's avatar
      KVM: SVM: introduce nested_run_pending · f74f9414
      Paolo Bonzini authored 
      We want to inject vmexits immediately from svm_check_nested_events,
so that the interrupt/NMI window requests happen in inject_pending_event
right after it returns.

This however has the same issue as in vmx_check_nested_events, so
introduce a nested_run_pending flag with the exact same purpose
of delaying vmexit injection after the vmentry.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      f74f9414
    • Paolo Bonzini's avatar
      Merge branch 'kvm-amd-fixes' into HEAD · 4aef2ec9
      Paolo Bonzini authored
      4aef2ec9
    • Babu Moger's avatar
      KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c · 37486135
      Babu Moger authored 
      Though rdpkru and wrpkru are contingent upon CR4.PKE, the PKRU
resource isn't. It can be read with XSAVE and written with XRSTOR.
So, if we don't set the guest PKRU value here(kvm_load_guest_xsave_state),
the guest can read the host value.

In case of kvm_load_host_xsave_state, guest with CR4.PKE clear could
potentially use XRSTOR to change the host PKRU value.

While at it, move pkru state save/restore to common code and the
host_pkru field to kvm_vcpu_arch.  This will let SVM support protection keys.

Cc: stable@vger.kernel.org
Reported-by: default avatarJim Mattson <jmattson@google.com>
Signed-off-by: default avatarBabu Moger <babu.moger@amd.com>
Message-Id: <158932794619.44260.14508381096663848853.stgit@naples-babu.amd.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      37486135
  3. 08 May, 2020 5 commits
    • Suravee Suthikulpanit's avatar
      KVM: SVM: Disable AVIC before setting V_IRQ · 7d611233
      Suravee Suthikulpanit authored 
      The commit 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window
while running L2 with V_INTR_MASKING=1") introduced a WARN_ON,
which checks if AVIC is enabled when trying to set V_IRQ
in the VMCB for enabling irq window.

The following warning is triggered because the requesting vcpu
(to deactivate AVIC) does not get to process APICv update request
for itself until the next #vmexit.

WARNING: CPU: 0 PID: 118232 at arch/x86/kvm/svm/svm.c:1372 enable_irq_window+0x6a/0xa0 [kvm_amd]
 RIP: 0010:enable_irq_window+0x6a/0xa0 [kvm_amd]
 Call Trace:
  kvm_arch_vcpu_ioctl_run+0x6e3/0x1b50 [kvm]
  ? kvm_vm_ioctl_irq_line+0x27/0x40 [kvm]
  ? _copy_to_user+0x26/0x30
  ? kvm_vm_ioctl+0xb3e/0xd90 [kvm]
  ? set_next_entity+0x78/0xc0
  kvm_vcpu_ioctl+0x236/0x610 [kvm]
  ksys_ioctl+0x8a/0xc0
  __x64_sys_ioctl+0x1a/0x20
  do_syscall_64+0x58/0x210
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes by sending APICV update request to all other vcpus, and
immediately update APIC for itself.
Signed-off-by: default avatarSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Link: https://lkml.org/lkml/2020/5/2/167
Fixes: 64b5bd27 ("KVM: nSVM: ignore L1 interrupt window while running L2 with V_INTR_MASKING=1")
Message-Id: <1588818939-54264-1-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      7d611233
    • Suravee Suthikulpanit's avatar
      KVM: Introduce kvm_make_all_cpus_request_except() · 54163a34
      Suravee Suthikulpanit authored 
      This allows making request to all other vcpus except the one
specified in the parameter.
Signed-off-by: default avatarSuravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-2-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      54163a34
    • Paolo Bonzini's avatar
      KVM: VMX: pass correct DR6 for GD userspace exit · 45981ded
      Paolo Bonzini authored 
      When KVM_EXIT_DEBUG is raised for the disabled-breakpoints case (DR7.GD),
DR6 was incorrectly copied from the value in the VM.  Instead,
DR6.BD should be set in order to catch this case.

On AMD this does not need any special code because the processor triggers
a #DB exception that is intercepted.  However, the testcase would fail
without the previous patch because both DR6.BS and DR6.BD would be set.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      45981ded
    • Paolo Bonzini's avatar
      KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6 · d67668e9
      Paolo Bonzini authored 
      There are two issues with KVM_EXIT_DEBUG on AMD, whose root cause is the
different handling of DR6 on intercepted #DB exceptions on Intel and AMD.

On Intel, #DB exceptions transmit the DR6 value via the exit qualification
field of the VMCS, and the exit qualification only contains the description
of the precise event that caused a vmexit.

On AMD, instead the DR6 field of the VMCB is filled in as if the #DB exception
was to be injected into the guest.  This has two effects when guest debugging
is in use:

* the guest DR6 is clobbered

* the kvm_run->debug.arch.dr6 field can accumulate more debug events, rather
than just the last one that happened (the testcase in the next patch covers
this issue).

This patch fixes both issues by emulating, so to speak, the Intel behavior
on AMD processors.  The important observation is that (after the previous
patches) the VMCB value of DR6 is only ever observable from the guest is
KVM_DEBUGREG_WONT_EXIT is set.  Therefore we can actually set vmcb->save.dr6
to any value we want as long as KVM_DEBUGREG_WONT_EXIT is clear, which it
will be if guest debugging is enabled.

Therefore it is possible to enter the guest with an all-zero DR6,
reconstruct the #DB payload from the DR6 we get at exit time, and let
kvm_deliver_exception_payload move the newly set bits into vcpu->arch.dr6.
Some extra bits may be included in the payload if KVM_DEBUGREG_WONT_EXIT
is set, but this is harmless.

This may not be the most optimized way to deal with this, but it is
simple and, being confined within SVM code, it gets rid of the set_dr6
callback and kvm_update_dr6.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      d67668e9
    • Paolo Bonzini's avatar
      KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6 · 5679b803
      Paolo Bonzini authored 
      kvm_x86_ops.set_dr6 is only ever called with vcpu->arch.dr6 as the
second argument.  Ensure that the VMCB value is synchronized to
vcpu->arch.dr6 on #DB (both "normal" and nested) and nested vmentry, so
that the current value of DR6 is always available in vcpu->arch.dr6.
The get_dr6 callback can just access vcpu->arch.dr6 and becomes redundant.
Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      5679b803
  5. 07 May, 2020 6 commits
  7. 06 May, 2020 4 commits
  9. 04 May, 2020 6 commits
  11. 01 May, 2020 1 commit
    • Marc Zyngier's avatar
      KVM: arm64: Fix 32bit PC wrap-around · 0225fd5e
      Marc Zyngier authored 
      In the unlikely event that a 32bit vcpu traps into the hypervisor
on an instruction that is located right at the end of the 32bit
range, the emulation of that instruction is going to increment
PC past the 32bit range. This isn't great, as userspace can then
observe this value and get a bit confused.

Conversly, userspace can do things like (in the context of a 64bit
guest that is capable of 32bit EL0) setting PSTATE to AArch64-EL0,
set PC to a 64bit value, change PSTATE to AArch32-USR, and observe
that PC hasn't been truncated. More confusion.

Fix both by:
- truncating PC increments for 32bit guests
- sanitizing all 32bit regs every time a core reg is changed by
  userspace, and that PSTATE indicates a 32bit mode.

Cc: stable@vger.kernel.org
Acked-by: default avatarWill Deacon <will@kernel.org>
Signed-off-by: default avatarMarc Zyngier <maz@kernel.org>
      0225fd5e
  13. 30 Apr, 2020 3 commits
  15. 24 Apr, 2020 3 commits
  17. 23 Apr, 2020 2 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7