- 05 Feb, 2019 6 commits
-
-
Lyude Paul authored
Atomic checks should never modify anything outside of the state that they're passed in. Unfortunately this appears to be exactly what we're doing in nv50_msto_atomic_check() where we update mstc->pbn every time the function is called. This hasn't caused any bugs yet, but it needs to be fixed in order to ensure that when committing an artificially duplicated state (like during system resume), that we reuse the PBN of that state to perform VCPI allocations and don't recalculate a different value from the drm connector's reported bpc. Also, move the VCPI slot allocations while we're at it as well. With this, removing a topology in suspend while using nouveau no longer causes the new atomic VCPI helpers to complain. Signed-off-by:
Lyude Paul <lyude@redhat.com> Fixes: eceae147 ("drm/dp_mst: Start tracking per-port VCPI allocations") Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
Ben Skeggs <bskeggs@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-5-lyude@redhat.com
-
Lyude Paul authored
Since commit 39b50c60 ("drm/atomic_helper: Stop modesets on unregistered connectors harder") We've been failing atomic checks if they try to enable new displays on unregistered connectors. This is fine except for the one situation that breaks atomic assumptions: suspend/resume. If a connector is unregistered before we attempt to restore the atomic state, something we end up failing the atomic check that happens when trying to restore the state during resume. Normally this would be OK: we try our best to make sure that the atomic state pre-suspend can be restored post-suspend, but failures at that point usually don't cause problems. That is of course, until we introduced the new atomic MST VCPI helpers: [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] [CRTC:65:pipe B] active changed [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Updating routing for [CONNECTOR:123:DP-5] [drm:drm_atomic_helper_check_modeset [drm_kms_helper]] Disabling [CONNECTOR:123:DP-5] [drm:drm_atomic_get_private_obj_state [drm]] Added new private object 0000000025844636 state 000000009fd2899a to 000000003a13d7b8 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Modules linked in: fuse vfat fat snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic joydev iTCO_wdt i915(O) wmi_bmof intel_rapl btusb btrtl x86_pkg_temp_thermal btbcm btintel coretemp i2c_algo_bit drm_kms_helper(O) crc32_pclmul snd_hda_intel syscopyarea sysfillrect snd_hda_codec sysimgblt snd_hda_core bluetooth fb_sys_fops snd_pcm pcspkr drm(O) psmouse snd_timer mei_me ecdh_generic i2c_i801 mei i2c_core ucsi_acpi typec_ucsi typec wmi thinkpad_acpi ledtrig_audio snd soundcore tpm_tis rfkill tpm_tis_core video tpm acpi_pad pcc_cpufreq uas usb_storage crc32c_intel nvme serio_raw xhci_pci nvme_core xhci_hcd CPU: 6 PID: 1070 Comm: gnome-shell Tainted: G W O 5.0.0-rc2Lyude-Test+ #1 Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 RIP: 0010:drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] Code: 00 4c 39 6d f0 74 49 48 8d 7b 10 48 89 f9 48 c1 e9 03 42 80 3c 21 00 0f 85 d2 00 00 00 48 8b 6b 10 48 8d 5d f0 49 39 ee 75 c5 <0f> 0b 48 c7 c7 c0 78 b3 a0 48 89 c2 4c 89 ee e8 03 6c aa ff b8 ea RSP: 0018:ffff88841235f268 EFLAGS: 00010246 RAX: ffff88841bf12ab0 RBX: ffff88841bf12aa8 RCX: 1ffff110837e2557 RDX: dffffc0000000000 RSI: 0000000000000000 RDI: ffffed108246bde0 RBP: ffff88841bf12ab8 R08: ffffed1083db3c93 R09: ffffed1083db3c92 R10: ffffed1083db3c92 R11: ffff88841ed9e497 R12: ffff888419555d80 R13: ffff8883bc499100 R14: ffff88841bf12ab8 R15: 0000000000000000 FS: 00007f16fbd4cd00(0000) GS:ffff88841ed80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1687c9f000 CR3: 00000003ba3cc003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: drm_atomic_helper_check_modeset+0xf21/0x2f50 [drm_kms_helper] ? drm_atomic_helper_commit_modeset_enables+0xa90/0xa90 [drm_kms_helper] ? __printk_safe_exit+0x10/0x10 ? save_stack+0x8c/0xb0 ? vprintk_func+0x96/0x1bf ? __printk_safe_exit+0x10/0x10 intel_atomic_check+0x234/0x4750 [i915] ? printk+0x9f/0xc5 ? kmsg_dump_rewind_nolock+0xd9/0xd9 ? _raw_spin_lock_irqsave+0xa4/0x140 ? drm_atomic_check_only+0xb1/0x28b0 [drm] ? drm_dbg+0x186/0x1b0 [drm] ? drm_dev_dbg+0x200/0x200 [drm] ? intel_link_compute_m_n+0xb0/0xb0 [i915] ? drm_mode_put_tile_group+0x20/0x20 [drm] ? skl_plane_format_mod_supported+0x17f/0x1b0 [i915] ? drm_plane_check_pixel_format+0x14a/0x310 [drm] drm_atomic_check_only+0x13c4/0x28b0 [drm] ? drm_state_info+0x220/0x220 [drm] ? drm_atomic_helper_disable_plane+0x1d0/0x1d0 [drm_kms_helper] ? pick_single_encoder_for_connector+0xe0/0xe0 [drm_kms_helper] ? kasan_unpoison_shadow+0x35/0x40 drm_atomic_commit+0x3b/0x100 [drm] drm_atomic_helper_set_config+0xd5/0x100 [drm_kms_helper] drm_mode_setcrtc+0x636/0x1660 [drm] ? vprintk_func+0x96/0x1bf ? drm_dev_dbg+0x200/0x200 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? printk+0x9f/0xc5 ? mutex_unlock+0x1d/0x40 ? drm_mode_addfb2+0x2e9/0x3a0 [drm] ? rcu_sync_dtor+0x2e0/0x2e0 ? drm_dbg+0x186/0x1b0 [drm] ? set_page_dirty+0x271/0x4d0 drm_ioctl_kernel+0x203/0x290 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_setversion+0x7f0/0x7f0 [drm] ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x34/0x70 drm_ioctl+0x445/0x950 [drm] ? drm_mode_getcrtc+0x790/0x790 [drm] ? drm_getunique+0x220/0x220 [drm] ? expand_files.part.10+0x920/0x920 do_vfs_ioctl+0x1a1/0x13d0 ? ioctl_preallocate+0x2b0/0x2b0 ? __fget_light+0x2d6/0x390 ? schedule+0xd7/0x2e0 ? fget_raw+0x10/0x10 ? apic_timer_interrupt+0xa/0x20 ? apic_timer_interrupt+0xa/0x20 ? rcu_cleanup_dead_rnp+0x2c0/0x2c0 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x6f/0xb0 do_syscall_64+0x136/0x440 ? syscall_return_slowpath+0x2d0/0x2d0 ? do_page_fault+0x89/0x330 ? __do_page_fault+0x9c0/0x9c0 ? prepare_exit_to_usermode+0x188/0x200 ? perf_trace_sys_enter+0x1090/0x1090 ? __x64_sys_sigaltstack+0x280/0x280 ? __put_user_4+0x1c/0x30 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f16ff89a09b Code: 0f 1e fa 48 8b 05 ed bd 0c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d bd bd 0c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff001232b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fff001232f0 RCX: 00007f16ff89a09b RDX: 00007fff001232f0 RSI: 00000000c06864a2 RDI: 000000000000000b RBP: 00007fff001232f0 R08: 0000000000000000 R09: 000055a79d484460 R10: 000055a79d44e770 R11: 0000000000000246 R12: 00000000c06864a2 R13: 000000000000000b R14: 0000000000000000 R15: 000055a79d44e770 WARNING: CPU: 6 PID: 1070 at drivers/gpu/drm/drm_dp_mst_topology.c:3153 drm_dp_atomic_release_vcpi_slots+0xb9/0x200 [drm_kms_helper] ---[ end trace d536c05c13c83be2 ]--- [drm:drm_dp_atomic_release_vcpi_slots [drm_kms_helper]] *ERROR* no VCPI for [MST PORT:00000000f9e2b143] found in mst state 000000009fd2899a This appears to be happening because we destroy the VCPI allocations when disabling all connected displays while suspending, and those VCPI allocations don't get restored on resume due to failing to restore the atomic state. So, fix this by introducing the suspending option to drm_atomic_helper_duplicate_state() and use that to indicate in the atomic state that it's being used for suspending or resuming the system, and thus needs to be fixed up by the driver. We can then use the new state->duplicated hook to tell update_connector_routing() in drm_atomic_check_modeset() to allow for modesets on unregistered connectors, which allows us to restore atomic states that contain MST topologies that were removed after the state was duplicated and thus: mostly fixing suspend and resume. This just leaves some issues that were introduced with nouveau, that will be addressed next. Changes since v3: * Remove ->duplicated hunks that I left in the VCPI helpers by accident. These don't need to be here, that was the supposed to be the purpose of the last revision Changes since v2: * Remove the changes in this patch to the VCPI helpers, they aren't needed anymore Changes since v1: * Rename suspend_or_resume to duplicated Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-4-lyude@redhat.com
-
Lyude Paul authored
Since we now have an easy way of refcounting drm_dp_mst_port structs and safely accessing their contents, there isn't any good reason to keep validating ports here. It doesn't prevent us from performing modesets on branch devices that have been removed either, and we already disallow enabling new displays on unregistered connectors in update_connector_routing() in drm_atomic_check_modeset(). All it does is cause us to have to make weird special exceptions in our atomic modesetting code. So, get rid of it entirely. Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190202002023.29665-3-lyude@redhat.com
-
Lyude Paul authored
In drm_dp_mst_deallocate_vcpi(), we currently unconditionally call drm_dp_mst_put_port_malloc() on the port that's passed to us, even if we never successfully allocated VCPI to it. This is contrary to what we do in drm_dp_mst_allocate_vcpi(), where we only call drm_dp_mst_get_port_malloc() on the passed port if we successfully allocated VCPI to it. As a result, if drm_dp_mst_allocate_vcpi() fails during a modeset and another successive modeset calls drm_dp_mst_deallocate_vcpi() we will end up dropping someone else's malloc reference to the port. Example: [ 962.309260] ================================================================== [ 962.309290] BUG: KASAN: use-after-free in drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309296] Read of size 4 at addr ffff888416c30004 by task kworker/0:1H/500 [ 962.309308] CPU: 0 PID: 500 Comm: kworker/0:1H Tainted: G W O 5.0.0-rc2Lyude-Test+ #1 [ 962.309313] Hardware name: LENOVO 20L8S2N800/20L8S2N800, BIOS N22ET35W (1.12 ) 04/09/2018 [ 962.309428] Workqueue: events_highpri intel_atomic_cleanup_work [i915] [ 962.309434] Call Trace: [ 962.309452] dump_stack+0xad/0x150 [ 962.309462] ? dump_stack_print_info.cold.0+0x1b/0x1b [ 962.309472] ? kmsg_dump_rewind_nolock+0xd9/0xd9 [ 962.309504] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309515] print_address_description+0x6c/0x23c [ 962.309542] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309568] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309577] kasan_report.cold.3+0x1a/0x32 [ 962.309605] ? drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309631] drm_dp_mst_put_port_malloc+0x72/0x180 [drm_kms_helper] [ 962.309658] ? drm_dp_mst_put_mstb_malloc+0x180/0x180 [drm_kms_helper] [ 962.309687] drm_dp_mst_destroy_state+0xcd/0x120 [drm_kms_helper] [ 962.309745] drm_atomic_state_default_clear+0x6ee/0xcc0 [drm] [ 962.309864] intel_atomic_state_clear+0xe/0x80 [i915] [ 962.309928] __drm_atomic_state_free+0x35/0xd0 [drm] [ 962.310044] intel_atomic_cleanup_work+0x56/0x70 [i915] [ 962.310057] process_one_work+0x884/0x1400 [ 962.310067] ? drain_workqueue+0x5a0/0x5a0 [ 962.310075] ? __schedule+0x87f/0x1e80 [ 962.310086] ? __sched_text_start+0x8/0x8 [ 962.310095] ? run_rebalance_domains+0x400/0x400 [ 962.310110] ? deref_stack_reg+0xb4/0x120 [ 962.310117] ? __read_once_size_nocheck.constprop.7+0x10/0x10 [ 962.310124] ? worker_enter_idle+0x47f/0x6a0 [ 962.310134] ? schedule+0xd7/0x2e0 [ 962.310141] ? __schedule+0x1e80/0x1e80 [ 962.310148] ? _raw_spin_lock_irq+0x9f/0x130 [ 962.310155] ? _raw_write_unlock_irqrestore+0x110/0x110 [ 962.310164] worker_thread+0x196/0x11e0 [ 962.310175] ? set_load_weight+0x2e0/0x2e0 [ 962.310181] ? __switch_to_asm+0x34/0x70 [ 962.310187] ? __switch_to_asm+0x40/0x70 [ 962.310194] ? process_one_work+0x1400/0x1400 [ 962.310199] ? __switch_to_asm+0x40/0x70 [ 962.310205] ? __switch_to_asm+0x34/0x70 [ 962.310211] ? __switch_to_asm+0x34/0x70 [ 962.310216] ? __switch_to_asm+0x40/0x70 [ 962.310221] ? __switch_to_asm+0x34/0x70 [ 962.310226] ? __switch_to_asm+0x40/0x70 [ 962.310231] ? __switch_to_asm+0x34/0x70 [ 962.310236] ? __switch_to_asm+0x40/0x70 [ 962.310242] ? syscall_return_via_sysret+0xf/0x7f [ 962.310248] ? __switch_to_asm+0x34/0x70 [ 962.310253] ? __switch_to_asm+0x40/0x70 [ 962.310258] ? __switch_to_asm+0x34/0x70 [ 962.310263] ? __switch_to_asm+0x40/0x70 [ 962.310268] ? __switch_to_asm+0x34/0x70 [ 962.310273] ? __switch_to_asm+0x40/0x70 [ 962.310281] ? __schedule+0x87f/0x1e80 [ 962.310292] ? __sched_text_start+0x8/0x8 [ 962.310300] ? save_stack+0x8c/0xb0 [ 962.310308] ? __kasan_kmalloc.constprop.6+0xc6/0xd0 [ 962.310313] ? kthread+0x98/0x3a0 [ 962.310318] ? ret_from_fork+0x35/0x40 [ 962.310334] ? __wake_up_common+0x178/0x6f0 [ 962.310343] ? _raw_spin_lock_irqsave+0xa4/0x140 [ 962.310349] ? __lock_text_start+0x8/0x8 [ 962.310355] ? _raw_write_lock_irqsave+0x70/0x130 [ 962.310360] ? __lock_text_start+0x8/0x8 [ 962.310371] ? process_one_work+0x1400/0x1400 [ 962.310376] kthread+0x2e2/0x3a0 [ 962.310383] ? kthread_create_on_node+0xc0/0xc0 [ 962.310389] ret_from_fork+0x35/0x40 [ 962.310401] Allocated by task 1462: [ 962.310410] __kasan_kmalloc.constprop.6+0xc6/0xd0 [ 962.310437] drm_dp_add_port+0xd60/0x1960 [drm_kms_helper] [ 962.310464] drm_dp_send_link_address+0x4b0/0x770 [drm_kms_helper] [ 962.310491] drm_dp_check_and_send_link_address+0x197/0x1f0 [drm_kms_helper] [ 962.310515] drm_dp_mst_link_probe_work+0x2b6/0x330 [drm_kms_helper] [ 962.310522] process_one_work+0x884/0x1400 [ 962.310529] worker_thread+0x196/0x11e0 [ 962.310533] kthread+0x2e2/0x3a0 [ 962.310538] ret_from_fork+0x35/0x40 [ 962.310543] Freed by task 500: [ 962.310550] __kasan_slab_free+0x133/0x180 [ 962.310555] kfree+0x92/0x1a0 [ 962.310581] drm_dp_mst_put_port_malloc+0x14d/0x180 [drm_kms_helper] [ 962.310693] intel_connector_destroy+0xb2/0xe0 [i915] [ 962.310747] drm_mode_object_put.part.0+0x12b/0x1a0 [drm] [ 962.310802] drm_atomic_state_default_clear+0x1f2/0xcc0 [drm] [ 962.310916] intel_atomic_state_clear+0xe/0x80 [i915] [ 962.310972] __drm_atomic_state_free+0x35/0xd0 [drm] [ 962.311083] intel_atomic_cleanup_work+0x56/0x70 [i915] [ 962.311092] process_one_work+0x884/0x1400 [ 962.311098] worker_thread+0x196/0x11e0 [ 962.311103] kthread+0x2e2/0x3a0 [ 962.311108] ret_from_fork+0x35/0x40 [ 962.311116] The buggy address belongs to the object at ffff888416c30000 which belongs to the cache kmalloc-2k of size 2048 [ 962.311122] The buggy address is located 4 bytes inside of 2048-byte region [ffff888416c30000, ffff888416c30800) [ 962.311124] The buggy address belongs to the page: [ 962.311132] page:ffffea00105b0c00 count:1 mapcount:0 mapping:ffff88841d003040 index:0x0 compound_mapcount: 0 [ 962.311142] flags: 0x8000000000010200(slab|head) [ 962.311152] raw: 8000000000010200 dead000000000100 dead000000000200 ffff88841d003040 [ 962.311159] raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 [ 962.311162] page dumped because: kasan: bad access detected So, bail early if drm_dp_mst_deallocate_vcpi() is called on a port with no VCPI allocation. Additionally, clean up the surrounding kerneldoc while we're at it since the port is assumed to be kept around because the DRM driver is expected to hold a malloc reference to it, not just us. Changes since v1: * Doc changes - danvet Signed-off-by: -
Gerd Hoffmann authored
ttm_fbdev_mmap() just doesn't work. It appears to work fine, mmap() returns success, but any attempt to actually access the mapping causes a SIGBUS. We can just use drm_gem_prime_mmap() instead. Almost. We have to copy over the start offset from the ttm_buffer_object vm_node to the drm_gem_object vm_node so the offset math in drm_gem_prime_mmap() works correctly for us even though we use ttm to manage our objects. Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Reviewed-by:
-
Gerd Hoffmann authored
Commit "f4bd542b drm/fb-helper: Scale back depth to supported maximum" uncovered a bug in the cirrus driver. It must create its own primary plane, using the correct format list, depending on the bpp module parameter, so it is consistent with mode_config->preferred_depth. Signed-off-by:
-
- 04 Feb, 2019 3 commits
-
-
Matt Roper authored
Most of these are just cases where code comments used contractions (it's, who's) where they actually mean to use a possessive pronoun (its, whose) or vice-versa. Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Oleksandr Andrushchenko authored
When GEM backing storage is allocated those are normal pages, so there is no point using pgprot_writecombine while mmaping. This fixes mismatch of buffer pages' memory attributes between the frontend and backend which may cause screen artifacts. Fixes: c575b7ee ("drm/xen-front: Add support for Xen PV display frontend") Signed-off-by:
Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Suggested-by:
Julien Grall <julien.grall@arm.com> Acked-by:
-
YueHaibing authored
There is no need to have the 'struct drm_framebuffer *fb' variable static since new value always be assigned before use it. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
-
- 03 Feb, 2019 3 commits
-
-
Shayenne Moura authored
When the vblank irq happens, kernel time subsystem executes `vkms_vblank_simulate`. In parallel or not, it prepares all stuff necessary to the next vblank with arm, and it must flush these stuff before the next vblank irq. However, vblank counter is ahead when arm is executed in parallel with handle vblank. CPU 0: CPU 1: | | atomic_commit_tail is ongoing | | | | hrtimer: vkms_vblank_simulate() | | | drm_crtc_handle_vblank() | | drm_crtc_arm_vblank() | | | ->get_vblank_timestamp() | | | | hrtimer_forward_now() Then, we should guarantee that the vblank interval time is correct (not changed) before finish the vblank handle. Fix the bug including the call to `hrtimer_forward_now()` in the same lock of `drm_crtc_handle_vblank()` to ensure that the timestamp update is correct when finish the vblank handle. Signed-off-by:
Shayenne Moura <shayenneluzmoura@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
-
Shayenne Moura authored
kms_flip tests are breaking on vkms when simulate vblank because vblank event sequence count returns one extra frame after arm vblank event to make a page flip. When vblank interrupt happens, userspace processes the vblank event and issues the next page flip command. Kernel calls queue_work to call commit_planes and arm the new page flip. The next vblank picks up the newly armed vblank event and vblank interrupt happens again. The arm and vblank event are asynchronous, then, on the next vblank, we receive x+2 from `get_vblank_timestamp`, instead x+1, although timestamp and vblank seqno matches. Function `get_vblank_timestamp` is reached by 2 ways: - from `drm_mode_page_flip_ioctl`: driver is doing one atomic operation to synchronize planes in the same output. There is no vblank simulation, the `drm_crtc_arm_vblank_event` function adds 1 on vblank count, and the variable in_vblank_irq is false - from `vkms_vblank_simulate`: since the driver is doing a vblank simulation, the variable in_vblank_irq is true. Fix this problem subtracting one vblank period from vblank_time when `get_vblank_timestamp` is called from trace `drm_mode_page_flip_ioctl`, i.e., is not a real vblank interrupt, and getting the timestamp and vblank seqno when it is a real vblank interrupt. The reason for all this is that get_vblank_timestamp always supplies the timestamp for the next vblank event. The hrtimer is the vblank simulator, and it needs the correct previous value to present the next vblank. Since this is how hw timestamp registers work and what the vblank core expects. Signed-off-by: -
Heiko Stuebner authored
This is a panel handled through the generic lvds-panel binding, so only needs its additional compatible specified. Signed-off-by:
Heiko Stuebner <heiko.stuebner@bq.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181113124205.29319-1-heiko@sntech.de
-
- 01 Feb, 2019 4 commits
-
-
Neil Armstrong authored
In order to support the HDMI2.0 YUV420 display modes, this patch adds support for the YUV420 TMDS Clock divided by 2 and the controller passthrough mode. YUV420 Synopsys PHY support will need some specific configuration table to support theses modes. This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in the Rockchip Linux 4.4 BSP at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Zheng Yang <zhengyang@rock-chips.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Heiko Stuebner <heiko@sntech.de> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Neil Armstrong authored
Now we support the TMDS Clock > 3.4GHz and support the SCDC Control operation in the DW-HDMI Controller, we can enable support for the HDMI2.0 3840x2160@60/50 RGB444 display modes. Signed-off-by:
-
Neil Armstrong authored
Add support for TMDS Clock > 3.4GHz for HDMI2.0 display modes. Signed-off-by:
-
Neil Armstrong authored
Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS Scrambling when supported or mandatory. This patch also adds an helper to setup the control bit to support the high TMDS Bit Period/TMDS Clock-Period Ratio as required with TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes. These changes were based on work done by Huicong Xu <xhc@rock-chips.com> and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes on the Rockchip 4.4 BSP kernel at [1] [1] https://github.com/rockchip-linux/kernel/tree/release-4.4 Cc: Nickey Yang <nickey.yang@rock-chips.com> Cc: Huicong Xu <xhc@rock-chips.com> Signed-off-by:
-
- 31 Jan, 2019 1 commit
-
-
Sean Paul authored
Drivers shouldn't be using these values, add a TODO so someone removes them. Changes in v2: - Add drm_display_mode.vrefresh removal (Ville) - Add Sam's R-b and bonus points Changes in v3: - Add hsync removal todo item (Daniel) - Change vrefresh wording to make removal less optional Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Suggested-by:
Sam Ravnborg <sam@ravnborg.org> Bonus-points-awarded-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
-
- 30 Jan, 2019 9 commits
-
-
Ville Syrjälä authored
Decode the NAK reply fields to make it easier to parse the logs. v2: s/STR/DP_STR/ to avoid conflict with some header stuff (0day) Use drm_dp_mst_req_type_str() more (DK) Signed-off-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190122200301.18633-2-ville.syrjala@linux.intel.com
-
Ville Syrjälä authored
Make the code a bit easier to read by providing symbolic names for the reply_type (ACK vs. NAK). Also clean up some brace stuff while at it. v2: s/DP_REPLY/DP_SIDEBAND_REPLY/ (DK) Fix some checkpatch issues Signed-off-by: -
Daniel Vetter authored
It only talks about crtc, brings up intel as an example and I think is more misleading than useful really. Plus we have lots of discussion about how your standard kms driver should be initialized/cleaned up, so maybe better to document this when we have a better idea. v2: Fix typo in commit message (Nicholas). Reviewed-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
Daniel Vetter authored
.. next to all the other sink helpers. The rect library is more used for handling plane clipping, so belongs to those imo. Reviewed-by:
-
Daniel Vetter authored
I'm kinda fed up explaining why the have a confusing name :-) v2: Fix typo that Eric Engestrom spotted. Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Noralf Trønnes <noralf@tronnes.org> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
Yes it's inconsitent with vrr_capable, but this is the actual uapi as exercise by igt. Fixes: ab7a664f ("drm: Document variable refresh properties") Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/gpu/drm/savage/savage_state.c:301:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/savage/savage_state.c:438:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/savage/savage_state.c:559:8: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/savage/savage_state.c:697:8: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: drivers/gpu/drm/via/via_dmablit.c:179:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/via/via_dmablit.c:185:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/via/via_dmablit.c:187:3: warning: this statement may fall through [-Wimplicit-fallthrough=] drivers/gpu/drm/via/via_dmablit.c:195:3: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough. Signed-off-by:
-
Gerd Hoffmann authored
qxl device will not dma, so we don't need ttm_dma_tt. Go use ttm_tt instead, to avoid wasting resources (swiotlb bounce buffers for example). Signed-off-by:
-
- 29 Jan, 2019 6 commits
-
-
Daniel Vetter authored
This is only used by drm_irq_install(), which is an optional helper. For legacy pci devices this is required (due to interrupt sharing without msi/msi-x), and just making this the default exactly matches the behaviour of all existing drivers using the drm_irq_install() helpers. In case that ever becomes wrong drivers can roll their own irq handling, as many drivers already do (for other reasons like needing a threaded interrupt handler, or having an entire pile of different interrupt sources). v2: Rebase v3: Improve commit message (Emil) Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Signed-off-by:
-
Daniel Vetter authored
And move the documenation we alreay have into kerneldoc, plus a bit of polish while at it. v2: - Ditch FIXME from commit message, I've resolved that already before sending out the first version. - Put the legacy DRIVER_ flags at the end (Sam). Cc: Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
-
Daniel Vetter authored
If a non-legacy driver calls these it's valid to assume there is interrupt support. The flag is really only needed for legacy drivers, which control IRQ enabling/disabling through the DRM_IOCTL_CONTROL legacy IOCTL. Also remove all the flag usage from non-legacy drivers. v2: Review from Emil: - improve commit message - I forgot hibmc, fix that Cc: linux-arm-kernel@lists.infradead.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: virtualization@lists.linux-foundation.org Cc: spice-devel@lists.freedesktop.org Cc: amd-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Reviewed-by:
-
Daniel Vetter authored
Both macros evaluate to 0. At the same time flag is already set to zero since the struct is kzalloc'd in framebuffer_alloc(). As called by drm_fb_helper_alloc_fbi() in the DRM drivers. v2: Rebase and improve commit message per Emil's suggestion. Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Acked-by:
Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190124165831.16427-27-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
It's probably not what you want, definitely not after Noralf's work to add drm_dev_enter/exit. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
-
Noralf Trønnes authored
If fbdev setup has failed, lastclose will give a NULL pointer deref: [ 77.794295] [drm:drm_lastclose] [ 77.794414] [drm:drm_lastclose] driver lastclose completed [ 77.794660] Unable to handle kernel NULL pointer dereference at virtual address 00000014 [ 77.809460] pgd = b376b71b [ 77.818275] [00000014] *pgd=175ba831, *pte=00000000, *ppte=00000000 [ 77.830813] Internal error: Oops: 17 [#1] ARM [ 77.840963] Modules linked in: mi0283qt mipi_dbi tinydrm raspberrypi_hwmon gpio_backlight backlight snd_bcm2835(C) bcm2835_rng rng_core [ 77.865203] CPU: 0 PID: 527 Comm: lt-modetest Tainted: G C 5.0.0-rc1+ #1 [ 77.879525] Hardware name: BCM2835 [ 77.889185] PC is at restore_fbdev_mode+0x20/0x164 [ 77.900261] LR is at drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c [ 78.002446] Process lt-modetest (pid: 527, stack limit = 0x7a3d5c14) [ 78.291030] Backtrace: [ 78.300815] [<c04f2d0c>] (restore_fbdev_mode) from [<c04f4708>] (drm_fb_helper_restore_fbdev_mode_unlocked+0x54/0x9c) [ 78.319095] r9:d8a8a288 r8:d891acf0 r7:d7697910 r6:00000000 r5:d891ac00 r4:d891ac00 [ 78.334432] [<c04f46b4>] (drm_fb_helper_restore_fbdev_mode_unlocked) from [<c04f47e8>] (drm_fbdev_client_restore+0x18/0x20) [ 78.353296] r8:d76978c0 r7:d7697910 r6:d7697950 r5:d7697800 r4:d891ac00 r3:c04f47d0 [ 78.368689] [<c04f47d0>] (drm_fbdev_client_restore) from [<c051b6b4>] (drm_client_dev_restore+0x7c/0xc0) [ 78.385982] [<c051b638>] (drm_client_dev_restore) from [<c04f8fd0>] (drm_lastclose+0xc4/0xd4) [ 78.402332] r8:d76978c0 r7:d7471080 r6:c0e0c088 r5:d8a85e00 r4:d7697800 [ 78.416688] [<c04f8f0c>] (drm_lastclose) from [<c04f9088>] (drm_release+0xa8/0x10c) [ 78.431929] r5:d8a85e00 r4:d7697800 [ 78.442989] [<c04f8fe0>] (drm_release) from [<c02640c4>] (__fput+0x104/0x1c8) [ 78.457740] r8:d5ccea10 r7:d96cfb10 r6:00000008 r5:d74c1b90 r4:d8a8a280 [ 78.472043] [<c0263fc0>] (__fput) from [<c02641ec>] (____fput+0x18/0x1c) [ 78.486363] r10:00000006 r9:d7722000 r8:c01011c4 r7:00000000 r6:c0ebac6c r5:d892a340 [ 78.501869] r4:d8a8a280 [ 78.512002] [<c02641d4>] (____fput) from [<c013ef1c>] (task_work_run+0x98/0xac) [ 78.527186] [<c013ee84>] (task_work_run) from [<c010cc54>] (do_work_pending+0x4f8/0x570) [ 78.543238] r7:d7722030 r6:00000004 r5:d7723fb0 r4:00000000 [ 78.556825] [<c010c75c>] (do_work_pending) from [<c0101034>] (slow_work_pending+0xc/0x20) [ 78.674256] ---[ end trace 70d3a60cf739be3b ]--- Fix by using drm_fb_helper_lastclose() which checks if fbdev is in use. Fixes: 9060d7f4 ("drm/fb-helper: Finish the generic fbdev emulation") Cc: stable@vger.kernel.org Signed-off-by:
-
- 28 Jan, 2019 8 commits
-
-
Eugen Hristev authored
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Cristian Birsan authored
PDA 91-00156-A0 5.0 is a 5.0" WVGA TFT LCD panel. This panel with backlight is found in PDA 5" LCD screen (TM5000 series or AC320005-5). Adding device tree bindings for this panel. Signed-off-by:
Cristian Birsan <cristian.birsan@microchip.com> [eugen.hristev@microchip.com]: specified backlight and supply bindings Signed-off-by:
-
Eugen Hristev authored
Precision Design Associates, Inc. (PDA) manufactures standard and custom capacitive touch screens, LCD's embedded controllers and custom embedded software. They specialize in industrial, rugged and outdoor applications. Website: http://www.pdaatl.com/Signed-off-by:
-
Paul Kocialkowski authored
This adds support for the 3.5" LCD panel from LeMaker, sold for use with BananaPi boards. It comes with a 24-bit RGB888 parallel interface and requires an active-low DE signal Signed-off-by:
Paul Kocialkowski <contact@paulk.fr> Signed-off-by:
-
Paul Kocialkowski authored
This adds the device-tree bindings for the LeMaker BL035-RGB-002 3.5" QVGA TFT LCD panel, compatible with simple-panel. Signed-off-by:
-
Paul Kocialkowski authored
This introduces a new device-tree binding vendor prefix for Shenzhen LeMaker Technology Co., Ltd. This vendor was already in use but it was not documented until now. Signed-off-by:
-
Nickey Yang authored
Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI dual-DSI panel. v4-resend: - Thierry noted missing dt-bindings for v4 but forgot that he already had applied them one kernel release back in https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df v4: - address Philipp's comments - real range for usleep_range and - poweroff ordering in kingdisplay_panel_prepare - return value beautification in panel_probe - update author naming for full name v3: - address Thierry's comments - error handling for init dsi writes in init - unconditionally remove the panel - don't use drm_panel_detach - a bit of variable signednes wiggling - I did talk to ChromeOS people and the delays really should be as short as possible, so dropped the 100ms from the delay comments v2: - update timing + cmds from chromeos kernel - new backlight API including switch to devm_of_find_backlight - fix most of Sean Paul's comments enable/prepare tracking seems something all panels do - document origins of the init sequence - lanes per dsi interface to 4 (two interfaces). Matches how tegra and pending rockchip dual-dsi handle (dual-)dsi lanes - spdx header instead of license boilerplate Signed-off-by:
Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by:
Sean Paul <sean@poorly.run> Signed-off-by:
-
Jagan Teki authored
ST7701 designed for small and medium sizes of TFT LCD display, is capable of supporting up to 480RGBX864 in resolution. It provides several system interfaces like MIPI/RGB/SPI. Currently added support for Techstar TS8550B which is ST7701 based 480x854, 2-lane MIPI DSI LCD panel. Driver now registering mipi_dsi device, but indeed it can extendable for RGB if any requirement trigger in future. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Reviewed-by:
-
