The current hyper-optimized functions are overkill if you simply want to
allocate an id for a device.  Create versions which use an internal
lock.

In followup patches, numerous drivers are converted to use this
interface.

Thanks to Tejun for feedback.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When send_cpu_listeners() finds the orphaned listener it marks it as
!valid and drops listeners->sem.  Before it takes this sem for writing,
s->pid can be reused and add_del_listener() can wrongly try to re-use
this entry.

Change add_del_listener() to check ->valid = T.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Acked-by: Balbir Singh <bsingharora@gmail.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

1. Commit 26c4caea "don't allow duplicate entries in listener mode"
   changed add_del_listener(REGISTER) so that "next_cpu:" can reuse the
   listener allocated for the previous cpu, this doesn't look exactly
   right even if minor.

   Change the code to kfree() in the already-registered case, this case
   is unlikely anyway so the extra kmalloc_node() shouldn't hurt but
   looke more correct and clean.

2. use the plain list_for_each_entry() instead of _safe() to scan
   listeners->list.

3. Remove the unneeded INIT_LIST_HEAD(&s->list), we are going to
   list_add(&s->list).
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: Jerome Marchand <jmarchan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

As the comment explains, the intention of the code is to clear the
OMAP_RTC_CTRL_MODE_12_24 bit, but instead it only clears the
OMAP_RTC_CTRL_SPLIT and OMAP_RTC_CTRL_AUTO_COMP bits, which should be
kept.  OMAP_RTC_CTRL_DISABLE, OMAP_RTC_CTRL_SET_32_COUNTER,
OMAP_RTC_CTRL_TEST, and OMAP_RTC_CTRL_ROUND_30S are also better off
being cleared.
Signed-off-by: Daniel Glöckner <dg@emlix.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

init_fault_attr_dentries() is used to export fault_attr via debugfs.
But it can only export it in debugfs root directory.

Per Forlin is working on mmc_fail_request which adds support to inject
data errors after a completed host transfer in MMC subsystem.

The fault_attr for mmc_fail_request should be defined per mmc host and
export it in debugfs directory per mmc host like
/sys/kernel/debug/mmc0/mmc_fail_request.

init_fault_attr_dentries() doesn't help for mmc_fail_request.  So this
introduces fault_create_debugfs_attr() which is able to create a
directory in the arbitrary directory and replace
init_fault_attr_dentries().

[akpm@linux-foundation.org: extraneous semicolon, per Randy]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Tested-by: Per Forlin <per.forlin@linaro.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'pstore-efi' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  efivars: fix warnings when CONFIG_PSTORE=n

* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  tools/power turbostat: fit output into 80 columns on snb-ep
  tools/power x86_energy_perf_policy: fix print of uninitialized string

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (28 commits)
  ACPI:  delete stale reference in kernel-parameters.txt
  ACPI: add missing _OSI strings
  ACPI: remove NID_INVAL
  thermal: make THERMAL_HWMON implementation fully internal
  thermal: split hwmon lookup to a separate function
  thermal: hide CONFIG_THERMAL_HWMON
  ACPI print OSI(Linux) warning only once
  ACPI: DMI workaround for Asus A8N-SLI Premium and Asus A8N-SLI DELUX
  ACPI / Battery: propagate sysfs error in acpi_battery_add()
  ACPI / Battery: avoid acpi_battery_add() use-after-free
  ACPI: introduce "acpi_rsdp=" parameter for kdump
  ACPI: constify ops structs
  ACPI: fix CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
  ACPI: fix 80 char overflow
  ACPI / Battery: Resolve the race condition in the sysfs_remove_battery()
  ACPI / Battery: Add the check before refresh sysfs in the battery_notify()
  ACPI / Battery: Add the hibernation process in the battery_notify()
  ACPI / Battery: Rename acpi_battery_quirks2 with acpi_battery_quirks
  ACPI / Battery: Change 16-bit signed negative battery current into correct value
  ACPI / Battery: Add the power unit macro
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile/mm/init.c: trivial: use BUG_ON
  arch/tile: remove useless set_fixmap_nocache() macro
  arch/tile: add hypervisor-based character driver for SPI flash ROM
  ioctl-number.txt: add the tile hardwall ioctl range
  tile: use generic-y format for one-line asm-generic headers
  clocksource: tile: convert to use clocksource_register_hz

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (31 commits)
  Btrfs: don't call writepages from within write_full_page
  Btrfs: Remove unused variable 'last_index' in file.c
  Btrfs: clean up for find_first_extent_bit()
  Btrfs: clean up for wait_extent_bit()
  Btrfs: clean up for insert_state()
  Btrfs: remove unused members from struct extent_state
  Btrfs: clean up code for merging extent maps
  Btrfs: clean up code for extent_map lookup
  Btrfs: clean up search_extent_mapping()
  Btrfs: remove redundant code for dir item lookup
  Btrfs: make acl functions really no-op if acl is not enabled
  Btrfs: remove remaining ref-cache code
  Btrfs: remove a BUG_ON() in btrfs_commit_transaction()
  Btrfs: use wait_event()
  Btrfs: check the nodatasum flag when writing compressed files
  Btrfs: copy string correctly in INO_LOOKUP ioctl
  Btrfs: don't print the leaf if we had an error
  btrfs: make btrfs_set_root_node void
  Btrfs: fix oops while writing data to SSD partitions
  Btrfs: Protect the readonly flag of block group
  ...

Fix up trivial conflicts (due to acl and writeback cleanups) in
 - fs/btrfs/acl.c
 - fs/btrfs/ctree.h
 - fs/btrfs/extent_io.c

* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6:
  MAINTAINERS: Add keyword match for of_match_table to device tree section
  of: constify property name parameters for helper functions
  input: xilinx_ps2: Add missing of_address.h header
  of: address: use resource_size helper

* 'spi/next' of git://git.secretlab.ca/git/linux-2.6:
  spi/pl022: remove function cannot exit

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm: (34 commits)
  dm table: set flush capability based on underlying devices
  dm crypt: optionally support discard requests
  dm raid: add md raid1 support
  dm raid: support metadata devices
  dm raid: add write_mostly parameter
  dm raid: add region_size parameter
  dm raid: improve table parameters documentation
  dm ioctl: forbid multiple device specifiers
  dm ioctl: introduce __get_dev_cell
  dm ioctl: fill in device parameters in more ioctls
  dm flakey: add corrupt_bio_byte feature
  dm flakey: add drop_writes
  dm flakey: support feature args
  dm flakey: use dm_target_offset and support discards
  dm table: share target argument parsing functions
  dm snapshot: skip reading origin when overwriting complete chunk
  dm: ignore merge_bvec for snapshots when safe
  dm table: clean dm_get_device and move exports
  dm raid: tidy includes
  dm ioctl: prevent empty message
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-watchdog:
  watchdog: Cleanup WATCHDOG_CORE help text
  watchdog: Fix POST failure on ASUS P5N32-E SLI and similar boards
  watchdog: shwdt: fix usage of mod_timer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: asihpi - Clarify adapter index validity check
  ALSA: asihpi - Don't leak firmware if mem alloc fails
  ALSA: rtctimer.c needs module.h
  ASoC: Fix txx9aclc.c build
  ALSA: hdspm - Add firmware revision 0xcc for RME MADI
  ALSA: hdspm - Fix reported external sample rate on RME MADI and MADIface
  ALSA: hdspm - Provide MADI speed mode selector on RME MADI and MADIface
  ALSA: sound/core/pcm_compat.c: adjust array index

Reduce columns for package number to 1.
If you can afford more than 9 packages,
you can also afford a terminal with more than 80 columns:-)

Also shave a column also off the package C-states
Signed-off-by: Len Brown <len.brown@intel.com>

drivers/firmware/efivars.c:161: warning: ‘utf16_strlen’ defined but not used
utf16_strlen() is only used inside CONFIG_PSTORE - make this "static inline"
to shut the compiler up [thanks to hpa for the suggestion].

drivers/firmware/efivars.c:602: warning: initialization from incompatible pointer type
Between v1 and v2 of this patch series we decided to make the "part" number
unsigned - but missed fixing the stub version of efi_pstore_write()
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Mike Waychison <mikew@google.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

Merge branches 'acpica', 'battery', 'boot-irqs', 'bz-24492', 'bz-9528', 'from-akpm', 'kexec-param' and 'misc' into release

Conflicts:
	Documentation/kernel-parameters.txt
Signed-off-by: Len Brown <len.brown@intel.com>

Says for acpi=
                        See also Documentation/power/pm.txt, pci=noacpi

but this file does not exist
Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>

Use BUG_ON(x) rather than if(x) BUG();

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@ identifier x; @@
-if (x) BUG();
+BUG_ON(x);

@@ identifier x; @@
-if (!x) BUG();
+BUG_ON(!x);
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

Linux supports some optional features, but it should notify the BIOS about
them via the _OSI method.  Currently Linux doesn't notify any, which might
make such features not work because the BIOS doesn't know about them.

Jarosz has a system which needs this to make ACPI processor aggregator
device work.
Reported-by: "Jarosz, Sebastian" <sebastian.jarosz@intel.com>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

b552a8c5 ("ACPI: remove NID_INVAL") removed the left over uses of
NID_INVAL, but didn't actually remove the definition.  Remove it.
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

THERMAL_HWMON is implemented inside the thermal_sys driver and has no
effect on drivers implementing thermal zones, so they shouldn't see
anything related to it in <linux/thermal.h>.  Making the THERMAL_HWMON
implementation fully internal has two advantages beyond the cleaner
design:

* This avoids rebuilding all thermal drivers if the THERMAL_HWMON
  implementation changes, or if CONFIG_THERMAL_HWMON gets enabled or
  disabled.

* This avoids breaking the thermal kABI in these cases too, which should
  make distributions happy.

The only drawback I can see is slightly higher memory fragmentation, as
the number of kzalloc() calls will increase by one per thermal zone.  But
I doubt it will be a problem in practice, as I've never seen a system with
more than two thermal zones.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rene Herman <rene.herman@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

We'll soon need to reuse it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rene Herman <rene.herman@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

It's about time to revert 16d75239 ("thermal: Create
CONFIG_THERMAL_HWMON=n").  Anybody running a kernel >= 2.6.40 would also
be running a recent enough version of lm-sensors.

Actually having CONFIG_THERMAL_HWMON is pretty convenient so instead of
dropping it, we keep it but hide it.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rene Herman <rene.herman@gmail.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

If a patch is working with an of_match_table it's probably adding an OF
binding to a driver in which case the binding ought to be reviewed by the
device tree folks to make sure that things like the device matches are set
up correctly.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

The helper functions for reading u32 integers, u32 arrays and strings
should have the property name as a const pointer.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

The remove function in the PL022 driver cannot abort the remove
function any way, so restructure the code so as not to make that
assumption. Remove will now proceed no matter whether it can
stop the transfer queue or not.
Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

DM has always advertised both REQ_FLUSH and REQ_FUA flush capabilities
regardless of whether or not a given DM device's underlying devices
also advertised a need for them.

Block's flush-merge changes from 2.6.39 have proven to be more costly
for DM devices.  Performance regressions have been reported even when
DM's underlying devices do not advertise that they have a write cache.

Fix the performance regressions by configuring a DM device's flushing
capabilities based on those of the underlying devices' capabilities.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add optional parameter field to dmcrypt table and support
"allow_discards" option.

Discard requests bypass crypt queue processing. Bio is simple remapped
to underlying device.

Note that discard will be never enabled by default because of security
consequences.  It is up to the administrator to enable it for encrypted
devices.

(Note that userspace cryptsetup does not understand new optional
parameters yet.  Support for this will come later.  Until then, you
should use 'dmsetup' to enable and disable this.)
Signed-off-by: Milan Broz <mbroz@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Support the MD RAID1 personality through dm-raid.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add the ability to parse and use metadata devices to dm-raid.  Although
not strictly required, without the metadata devices, many features of
RAID are unavailable.  They are used to store a superblock and bitmap.

The role, or position in the array, of each device must be recorded in
its superblock.  This is to help with fault handling, array reshaping,
and sanity checks.  RAID 4/5/6 devices must be loaded in a specific order:
in this way, the 'array_position' field helps validate the correctness
of the mapping when it is loaded.  It can be used during reshaping to
identify which devices are added/removed.  Fault handling is impossible
without this field.  For example, when a device fails it is recorded in
the superblock.  If this is a RAID1 device and the offending device is
removed from the array, there must be a way during subsequent array
assembly to determine that the failed device was the one removed.  This
is done by correlating the 'array_position' field and the bit-field
variable 'failed_devices'.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add the write_mostly parameter to RAID1 dm-raid tables.

This allows the user to set the WriteMostly flag on a RAID1 device that
should normally be avoided for read I/O.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Allow the user to specify the region_size.

Ensures that the supplied value meets md's constraints, viz. the number of
regions does not exceed 2^21.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add more information about some dm-raid table parameters and clarify how
parameters are printed when 'dmsetup table' is issued.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Exactly one of name, uuid or device must be specified when referencing
an existing device.  This removes the ambiguity (risking the wrong
device being updated) if two conflicting parameters were specified.
Previously one parameter got used and any others were ignored silently.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move logic to find device based on major/minor number to a separate
function __get_dev_cell (similar to __get_uuid_cell and __get_name_cell).
This makes the function __find_device_hash_cell more straightforward.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Move parameter filling from find_device to __find_device_hash_cell.

This patch causes ioctls using __find_device_hash_cell
(DM_DEV_REMOVE_CMD, DM_DEV_SUSPEND_CMD - resume, DM_TABLE_CLEAR_CMD)
to return device parameters, bringing them into line with the other
ioctls.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

Add corrupt_bio_byte feature to simulate corruption by overwriting a byte at a
specified position with a specified value during intervals when the device is
"down".
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>