- 18 May, 2013 15 commits
-
-
Miao Xie authored
inode_tree_del() will move the tree root into the dead root list, and then the tree will be destroyed by the cleaner. So if we remove the delayed node which is cached in the inode after inode_tree_del(), we may access a freed tree root. Fix it. Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Liu Bo authored
We need to set return value explicitly, otherwise we'll lose the error value. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
Before applying this patch, we reserved the space for the global reserve by the minimum unit if we found it is empty, it was unreasonable and inefficient, because if the global reserve space was depleted, it implied that the size of the global reserve was too small. In this case, we shoud update the global reserve and fill it. Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
If the type of the space we need is different with the global reserve, we can not steal the space from the global reserve, because we can not allocate the space from the free space cache that the global reserve points to. Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
It is very likely that there are lots of subvolumes/snapshots in the filesystem, so if we use global block reservation to do inode cache truncation, we may hog all the free space that is reserved in global rsv. So it is better that we do the free space reservation for inode cache truncation by ourselves. Cc: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
The filesystem with inode cache was forced to be read-only when we umounted it. Steps to reproduce: # mkfs.btrfs -f ${DEV} # mount -o inode_cache ${DEV} ${MNT} # dd if=/dev/zero of=${MNT}/file1 bs=1M count=8192 # btrfs fi syn ${MNT} # dd if=${MNT}/file1 of=/dev/null bs=1M # rm -f ${MNT}/file1 # btrfs fi syn ${MNT} # umount ${MNT} It is because there was no enough space to do inode cache truncation, and then we aborted the current transaction. But no space error is not a serious problem when we write out the inode cache, and it is safe that we just skip this step if we meet this problem. So we need not abort the current transaction. Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Andreas Philipp authored
Raid5 with 3 devices is well defined while the old logic allowed raid5 only with a minimum of 4 devices when converting the block group profile via btrfs balance. Creating a raid5 with just three devices using mkfs.btrfs worked always as expected. This is now fixed and the whole logic is rewritten. Signed-off-by: Andreas Philipp <philipp.andreas@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
In replace_path(), if read_tree_block() fails, we cannot return directly, we should free some allocated memory otherwise memory leak happens. Similar to Wang's "Btrfs: fix possible memory leak in the find_parent_nodes()" patch, the current commit fixes an issue that is related to the "Btrfs: fix all callers of read_tree_block" commit. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Wang Shilong authored
In the find_parent_nodes(), if read_tree_block() fails, we can not return directly, we should free some allocated memory otherwise memory leak happens. Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
This is not yet supported and causes crashes. One sad user reported that it destroyed his filesystem. One failure is in __btrfs_map_block+0xc1f calling kmalloc(0). 0x5f21f is in __btrfs_map_block (fs/btrfs/volumes.c:4923). 4918 num_stripes = map->num_stripes; 4919 max_errors = nr_parity_stripes(map); 4920 4921 raid_map = kmalloc(sizeof(u64) * num_stripes, 4922 GFP_NOFS); 4923 if (!raid_map) { 4924 ret = -ENOMEM; 4925 goto out; 4926 } 4927 There might be more issues. Until this is really tested, don't allow users to start the procedure on RAID5/RAID6 filesystems. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
Chris hit a bug where we weren't finding extent records when running extent ops. This is because we use the delayed_ref_head when running the extent op, which means we can't use the ->type checks to see if we are metadata. We also lose the level of the metadata we are working on. So to fix this we can just check the ->is_data section of the extent_op, and we can store the level of the buffer we were modifying in the extent_op. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
This catches block groups that are too large to properly cache. We deal with this case fine, so the warning just confuses users. Remove the warning. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
I'm sorry, theres no excuse for this sort of work. We need to use root->leafsize since eb may be NULL. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Gabriel de Perthuis authored
The search ioctl skips items that are too large for a result buffer, but inline items of a certain size occuring before any search result is found would trigger an overflow and stop the search entirely. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641 Cc: stable@vger.kernel.org Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
- 17 May, 2013 2 commits
-
-
Liu Bo authored
lock_extent/unlock_extent expect an exclusive end. Tested-by: David Sterba <dsterba@suse.cz> Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
David Sterba authored
Quota tree has been missing from lockdep annotations, though no warning has been seen in the wild. There's currently one entry that does not belong there, BTRFS_ORPHAN_OBJECTID. No such tree exists, it's probably a copy & paste mistake, the id is defined among tree ids. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
- 07 May, 2013 2 commits
-
-
Chris Mason authored
We've added new checks to make sure the super block crc is correct during mount. A fresh filesystem from an older mkfs won't have the crc set. This adds a warning when it finds a newly created filesystem but doesn't fail the mount. Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
David Sterba authored
The superblock checksum is not verified upon mount. <awkward silence> Add that check and also reorder existing checks to a more logical order. Current mkfs.btrfs does not calculate the correct checksum of super_block and thus a freshly created filesytem will fail to mount when this patch is applied. First transaction commit calculates correct superblock checksum and saves it to disk. Reproducer: $ mfks.btrfs /dev/sda $ mount /dev/sda /mnt $ btrfs scrub start /mnt $ sleep 5 $ btrfs scrub status /mnt ... super:2 ... Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
-
- 06 May, 2013 21 commits
-
-
David Sterba authored
The variable was named 'data' in btrfs_reserve_extent and that's the only function that actually uses it to let btrfs_get_alloc_profile know what profile we want. Then it's passed down as u64 flags. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
David Sterba authored
Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Liu Bo authored
1) Right now scrub_stripe() is looping in some unnecessary cases: * when the found extent item's objectid has been out of the dev extent's range but we haven't finish scanning all the range within the dev extent * when all the items has been processed but we haven't finish scanning all the range within the dev extent In both cases, we can just finish the loop to save costs. 2) Besides, when the found extent item's length is larger than the stripe len(64k), we don't have to release the path and search again as it'll get at the same key used in the last loop, we can instead increase the logical cursor in place till all space of the extent is scanned. 3) And we use 0 as the key's offset to search btree, then get to previous item to find a smaller item, and again have to move to the next one to get the right item. Setting offset=-1 and previous_item() is the correct way. 4) As we won't find any checksum at offset unless this 'offset' is in a data extent, we can just find checksum when we're really going to scrub an extent. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
David Sterba authored
There's a theoretical possibility of reading stale (or even more theoretically, freed) data from DEV_INFO ioctl when the device would disappear between an early mutex unlock and data being copied from the device structure. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
David Sterba authored
It's unused since 0b32f4bb. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
David Sterba authored
Signed-off-by: David Sterba <dsterba@suse.cz> Reviewed-by: Zach Brown <zab@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Eric Sandeen authored
Big patch, but all it does is add statics to functions which are in fact static, then remove the associated dead-code fallout. removed functions: btrfs_iref_to_path() __btrfs_lookup_delayed_deletion_item() __btrfs_search_delayed_insertion_item() __btrfs_search_delayed_deletion_item() find_eb_for_page() btrfs_find_block_group() range_straddles_pages() extent_range_uptodate() btrfs_file_extent_length() btrfs_scrub_cancel_devid() btrfs_start_transaction_lflush() btrfs_print_tree() is left because it is used for debugging. btrfs_start_transaction_lflush() and btrfs_reada_detach() are left for symmetry. ulist.c functions are left, another patch will take care of those. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
If you try to mount -o loop a restored file system it will panic if the file ends up being smaller than the original disk. This is because we go to try and get a block for a super that may be past the EOF which makes __getblk return NULL for a buffer head when we aren't expecting it to. Fix this by dealing with this case and just jacking up the errors count. With this patch we no longer panic when mounting a restored file system loopback. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
There were a whole bunch and I was doing it for other things. I haven't tested these error paths but at the very least this is better than panicing. I've only left 2 BUG_ON()'s since they are logic errors and I want to replace them with a ASSERT framework that we can compile out for production users. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Josef Bacik authored
So everybody who got hit by my fsync bug will still continue to hit this BUG_ON() in the free space cache, which is pretty heavy handed. So I took a file system that had this bug and fixed up all the BUG_ON()'s and leaks that popped up when I tried to mount a broken file system like this. With this patch we just fail to mount instead of panicing. Thanks, Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
When qgroup tracking is enabled, we do an automatic cycle of the new rescan mechanism. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
If qgroup tracking is out of sync, a rescan operation can be started. It iterates the complete extent tree and recalculates all qgroup tracking data. This is an expensive operation and should not be used unless required. A filesystem under rescan can still be umounted. The rescan continues on the next mount. Status information is provided with a separate ioctl while a rescan operation is in progress. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
The function is separated into a preparation part and the three accounting steps mentioned in the qgroups documentation. The goal is to make steps two and three usable by the rescan functionality. A side effect is that the function is restructured into readable subunits. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Miao Xie authored
When running the 208th of xfstests, the fs returned the enospc error when there was lots of free space in the disk. By bisect debug, we found it was introduced by commit 96f1bb57. This commit makes the space check for the global reservation in can_overcommit() be inconsistent with should_alloc_chunk(). can_overcommit() requires that the free space is 2 times the size of the global reservation, or we can't do overcommit. And instead, we need reclaim some reserved space, and if we still don't have enough free space, we need allocate a new chunk. But unfortunately, should_alloc_chunk() just requires that the free space is 1 time the size of the global reservation, that is we would not try to allocate a new chunk if the free space size is in the middle of these two requires, and just return the enospc error. Fix it. Cc: Jim Schutt <jaschut@sandia.gov> Cc: Josef Bacik <jbacik@fusionio.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Jan Schmidt authored
Sequence numbers for delayed refs have been introduced in the first version of the qgroup patch set. To solve the problem of find_all_roots on a busy file system, the tree mod log was introduced. The sequence numbers for that were simply shared between those two users. However, at one point in qgroup's quota accounting, there's a statement accessing the previous sequence number, that's still just doing (seq - 1) just as it would have to in the very first version. To satisfy that requirement, this patch makes the sequence number counter 64 bit and splits it into a major part (used for qgroup sequence number counting) and a minor part (incremented for each tree modification in the log). This enables us to go exactly one major step backwards, as required for qgroups, while still incrementing the sequence counter for tree mod log insertions to keep track of their order. Keeping them in a single variable means there's no need to change all the code dealing with comparisons of two sequence numbers. The sequence number is reset to 0 on commit (not new in this patch), which ensures we won't overflow the two 32 bit counters. Without this fix, the qgroup tracking can occasionally go wrong and WARN_ONs from the tree mod log code may happen. Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Eric Sandeen authored
Clean up the leak debugging in extent_io.c by moving the debug code into functions. This also removes the list_heads used for debugging from the extent_buffer and extent_state structures when debug is not enabled. Since we need a global debug config to do that last part, implement CONFIG_BTRFS_DEBUG to accommodate. Thanks to Dave Sterba for the Kconfig bit. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: David Sterba <dsterba@suse.cz> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Liu Bo authored
Replace some BUG_ONs with proper handling and take allocated space back to free space cache for later use. We don't have to worry about extent maps since they'd be freed in releasepage path. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
It is a rare exception that a new tree is created, like the qgroups tree. So far these new trees have an all-zero UUID in their root items. All trees that mkfs.btrfs has created get an UUID during the first mount when btrfs_read_root_item() rewrites the root_item to the v2 structure style. These UUID are never used so far, but anyway, since it is better to have it uniform for all trees, this commit adds some lines that generate and write an UUID for newly created trees. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Stefan Behrens authored
Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
fget() returns NULL if error. So, we should check NULL or not. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-
Tsutomu Itoh authored
Variable 'p' is not used any more. So, remove it. Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Josef Bacik <jbacik@fusionio.com>
-