- 28 Jul, 2004 40 commits
-
-
Samuel Thibault authored
Here is a small fix to enable muting ESS Maestro sound card thanks to the up/down buttons: when has reached the driver's minimum (! this is something like -dB value), just mute. (It was working in OSS driver, but not in ALSA) Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Stephen Hemminger authored
Make code for hlist_for_each_safe use better code (same as hlist_for_each_entry_safe). Get rid of comment about prefetch, because that was fixed a while ago. Only current use of this is in the bridge code, that I maintain. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
Roland Dreier authored
Quite a few functions in lib/string.c are not exported. I ran into this trying to use strnchr() in a module. This patch - exports every function defined in lib/string.c - adds some missing __HAVE_ARCH_xxx defines for i386 - gets rid of the exports of functions from lib/string.c in arch/s390 (BTW, why is s390 exporting things NOVERS?) Signed-off-by:
Roland Dreier <roland@topspin.com> Signed-off-by:
-
Domen Puncer authored
From: Geert Uytterhoeven <geert@linux-m68k.org> These four are called from fb_show_logo, which is exported symbol, called by fbcon_switch. From: Domen Puncer <domen@coderock.org> Signed-off-by: Maximilian Attems Signed-off-by:
-
Shane Shrybman authored
Removal of unused variable in mm/readahead.c. Signed-off-by:
-
David Eger authored
Cirrusfb updates: - Cirrusfb depends on Zorro or PCI - Revive Zorro support, using new Zorro driver framework - Merge PCI and Zorro code where possible - Use C99 initializers - Kill superfluous whitespace - #undef I/O ops before redefining them on Amiga From: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Eger <eger@havoc.gtf.org> Signed-off-by:
-
Geert Uytterhoeven authored
Dallas 1-wire: never include <asm/delay.h> directly Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
Matrox 1-wire unconditionally depends on PCI Signed-off-by:
-
Geert Uytterhoeven authored
Toshiba and VIA FIR unconditionally depend on PCI Signed-off-by:
-
Geert Uytterhoeven authored
Cisco/Aironet 34X/35X/4500/4800 unconditionally depends on the PCI DMA API, so mark it broken if !PCI Signed-off-by:
-
Geert Uytterhoeven authored
Technisat Skystar2 PCI unconditionally depends on PCI Signed-off-by:
-
Geert Uytterhoeven authored
Guillemot MAXI Radio FM 2000 unconditionally depends on PCI Signed-off-by:
-
Geert Uytterhoeven authored
Kill warnings in Hisax ISDN drivers when !PCI. Signed-off-by:
-
Geert Uytterhoeven authored
Fritz!PCI/PCIv2/PnP and HYSDN unconditionally depend on PCI Signed-off-by:
-
Geert Uytterhoeven authored
IEEE1394 core and SBP-2 unconditionally depend on the PCI DMA API, so mark them broken if !PCI Signed-off-by:
-
Geert Uytterhoeven authored
VIA686A i2c unconditionally depends on PCI Signed-off-by:
-
Geert Uytterhoeven authored
Kill warnings in Specialix serial driver when !PCI. Signed-off-by:
-
Geert Uytterhoeven authored
Kill warnings in MOXA Intellio and Smartio multiport serial drivers when !PCI. Also kill warnings about unused variables in the non-modular case. Signed-off-by:
-
Geert Uytterhoeven authored
Multi-Tech, Microgate SyncLink, and Applicom serial unconditionally depend on PCI Signed-off-by:
-
Geert Uytterhoeven authored
M68k maintainership update: - Transfer maintainership to Roman and me (ack'ed by Jes and Roman) - Update main website URL - Add Linux/m68k CVS repository website Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Fix build after <asm/pgalloc.h> surgery in 2.6.8-rc1: - Add missing include on machines with a standard m68k MMU - Convert __pte_free_tlb() to a macro (like it is on most other archs) on Sun-3, to avoid include hell Signed-off-by: -
Geert Uytterhoeven authored
M68k: Add missing include, showing up due to include reshuffling in 2.6.8-rc1 Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add `volatile' to some bitops parameters, as this is required by the cpumask code in 2.6.8-rc1. Signed-off-by:
-
Geert Uytterhoeven authored
Dmasound was moved to sound/oss/ a while ago Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add missing #include <linux/config.h> Signed-off-by:
-
Geert Uytterhoeven authored
Amiga Frame buffer: Use `&' instead of `&=' (found by sparse, present since at least 2.0.x) Signed-off-by:
-
Geert Uytterhoeven authored
Apollo Frame buffer: Fix C99 struct initializers (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Replace floating point by integer constants (found by sparse) Affected drivers: - Amiga frame buffer - ATI Mach64 frame buffer Signed-off-by:
-
Geert Uytterhoeven authored
Atari dsp56k: Add missing `const' keywords (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Define inline functions before use (found by sparse) Affected drivers: - Atari floppy - Amiga A2232 serial - Amiga Fastlane SCSI - Mac/PowerMac Valkyrie frame buffer Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Remove `extern' at function definition (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Don't return anything in functions returning void (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Use #ifdef instead of #if (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Add missing `void' parameters (found by sparse) Signed-off-by:
-
Geert Uytterhoeven authored
68060 Integer Support Package: Fix _060_real_lock_page(): test %d0 before actually using it (from Roman Zippel) Signed-off-by:
Roman Zippel <zippel@linux-m68k.org> Signed-off-by:
-
Geert Uytterhoeven authored
M68k: gcc lately manages to generate the code sequence described in the 060 errata I14, so use the described workaround (from Roman Zippel) Signed-off-by:
-
Willem Riede authored
This list has been on sourceforge for a while now, please apply this patch to make MAINTAINERS reflect that. Signed-off-by:
Willem Riede <osst@riede.org> Signed-off-by:
-
Miklos Szeredi authored
Current readahead logic is broken when a random read pattern is followed by a long sequential read. The cause is that on a window miss ra->next_size is set to ra->average, but ra->average is only updated at the end of a sequence, so window size will remain 1 until the end of the sequential read. This patch fixes this by taking the current sequence length into account (code taken from towards end of page_cache_readahead()), and also setting ra->average to a decent value in handle_ra_miss() when sequential access is detected. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Brian Gerst authored
This script is no longer used after the patch to consolidate the stored configs. Signed-off-by:
-
Khalid Aziz authored
On a 2.6.7 kernel, when I try to modprobe ipmi_msghandler, it fails to load with following message: FATAL: Error inserting ipmi_msghandler (/lib/modules/2.6.7/kernel/drivers/char/ipmi/ipmi_msghandler.ko): Invalid module format And there is an error message in dmesg: ipmi_msghandler: init symbol 0xa000000200058080 used in module code at a000000200031b32 What I have been able to determine is that ipmi_msghandler.c defines ipmi_init_msghandler() as the module_init() routine and then it also calls ipmi_init_msghandler() diretcly from couple of other places. This does not seem to be okay in 2.6.7 kernel. I was able to fix this by defining a new module_init routine which in turn calls ipmi_init_msghandler(). I also removed __init from ipmi_init_msghandler() since it gets called from ipmi_open() on an open of the ipmi device file. So I would think we want to keep ipmi_init_msghandler() around even after initialization. Signed-off-by:
-
