Skip to content

L
linux
Switch branch/tag
  1. 12 Apr, 2018 6 commits
    • Amir Goldstein's avatar
      ovl: do not try to reconnect a disconnected origin dentry · 8a22efa1
      Amir Goldstein authored 
      On lookup of non directory, we try to decode the origin file handle
stored in upper inode. The origin file handle is supposed to be decoded
to a disconnected non-dir dentry, which is fine, because we only need
the lower inode of a copy up origin.

However, if the origin file handle somehow turns out to be a directory
we pay the expensive cost of reconnecting the directory dentry, only to
get a mismatch file type and drop the dentry.

Optimize this case by explicitly opting out of reconnecting the dentry.
Opting-out of reconnect is done by passing a NULL acceptable callback
to exportfs_decode_fh().

While the case described above is a strange corner case that does not
really need to be optimized, the API added for this optimization will
be used by a following patch to optimize a more common case of decoding
an overlayfs file handle.
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      8a22efa1
    • Amir Goldstein's avatar
      ovl: disambiguate ovl_encode_fh() · 5b2cccd3
      Amir Goldstein authored 
      Rename ovl_encode_fh() to ovl_encode_real_fh() to differentiate from the
exportfs function ovl_encode_inode_fh() and change the latter to
ovl_encode_fh() to match the exportfs method name.

Rename ovl_decode_fh() to ovl_decode_real_fh() for consistency.
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      5b2cccd3
    • Amir Goldstein's avatar
      ovl: set lower layer st_dev only if setting lower st_ino · 9f99e50d
      Amir Goldstein authored 
      For broken hardlinks, we do not return lower st_ino, so we should
also not return lower pseudo st_dev.

Fixes: a0c5ad30 ("ovl: relax same fs constraint for constant st_ino")
Cc: <stable@vger.kernel.org> #v4.15
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      9f99e50d
    • Amir Goldstein's avatar
      ovl: fix lookup with middle layer opaque dir and absolute path redirects · 3ec9b3fa
      Amir Goldstein authored 
      As of now if we encounter an opaque dir while looking for a dentry, we set
d->last=true. This means that there is no need to look further in any of
the lower layers. This works fine as long as there are no redirets or
relative redircts. But what if there is an absolute redirect on the
children dentry of opaque directory. We still need to continue to look into
next lower layer. This patch fixes it.

Here is an example to demonstrate the issue. Say you have following setup.

upper:  /redirect (redirect=/a/b/c)
lower1: /a/[b]/c       ([b] is opaque) (c has absolute redirect=/a/b/d/)
lower0: /a/b/d/foo

Now "redirect" dir should merge with lower1:/a/b/c/ and lower0:/a/b/d.
Note, despite the fact lower1:/a/[b] is opaque, we need to continue to look
into lower0 because children c has an absolute redirect.

Following is a reproducer.

Watch me make foo disappear:

 $ mkdir lower middle upper work work2 merged
 $ mkdir lower/origin
 $ touch lower/origin/foo
 $ mount -t overlay none merged/ \
         -olowerdir=lower,upperdir=middle,workdir=work2
 $ mkdir merged/pure
 $ mv merged/origin merged/pure/redirect
 $ umount merged
 $ mount -t overlay none merged/ \
         -olowerdir=middle:lower,upperdir=upper,workdir=work
 $ mv merged/pure/redirect merged/redirect

Now you see foo inside a twice redirected merged dir:

 $ ls merged/redirect
 foo
 $ umount merged
 $ mount -t overlay none merged/ \
         -olowerdir=middle:lower,upperdir=upper,workdir=work

After mount cycle you don't see foo inside the same dir:

 $ ls merged/redirect

During middle layer lookup, the opaqueness of middle/pure is left in
the lookup state and then middle/pure/redirect is wrongly treated as
opaque.

Fixes: 02b69b28 ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarVivek Goyal <vgoyal@redhat.com>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      3ec9b3fa
    • Vivek Goyal's avatar
      ovl: Set d->last properly during lookup · 452061fd
      Vivek Goyal authored 
      d->last signifies that this is the last layer we are looking into and there
is no more. And that means this allows for some optimzation opportunities
during lookup. For example, in ovl_lookup_single() we don't have to check
for opaque xattr of a directory is this is the last layer we are looking
into (d->last = true).

But knowing for sure whether we are looking into last layer can be very
tricky. If redirects are not enabled, then we can look at poe->numlower and
figure out if the lookup we are about to is last layer or not. But if
redircts are enabled then it is possible poe->numlower suggests that we are
looking in last layer, but there is an absolute redirect present in found
element and that redirects us to a layer in root and that means lookup will
continue in lower layers further.

For example, consider following.

/upperdir/pure (opaque=y)
/upperdir/pure/foo (opaque=y,redirect=/bar)
/lowerdir/bar

In this case pure is "pure upper". When we look for "foo", that time
poe->numlower=0. But that alone does not mean that we will not search for a
merge candidate in /lowerdir. Absolute redirect changes that.

IOW, d->last should not be set just based on poe->numlower if redirects are
enabled. That can lead to setting d->last while it should not have and that
means we will not check for opaque xattr while we should have.

So do this.

 - If redirects are not enabled, then continue to rely on poe->numlower
   information to determine if it is last layer or not.

 - If redirects are enabled, then set d->last = true only if this is the
   last layer in root ovl_entry (roe).
Suggested-by: default avatarAmir Goldstein <amir73il@gmail.com>
Reviewed-by: default avatarAmir Goldstein <amir73il@gmail.com>
Signed-off-by: default avatarVivek Goyal <vgoyal@redhat.com>
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
Fixes: 02b69b28 ("ovl: lookup redirects")
Cc: <stable@vger.kernel.org> #v4.10
      452061fd
    • Amir Goldstein's avatar
      ovl: set i_ino to the value of st_ino for NFS export · 695b46e7
      Amir Goldstein authored 
      Eddie Horng reported that readdir of an overlayfs directory that
was exported via NFSv3 returns entries with d_type set to DT_UNKNOWN.
The reason is that while preparing the response for readdirplus, nfsd
checks inside encode_entryplus_baggage() that a child dentry's inode
number matches the value of d_ino returns by overlayfs readdir iterator.

Because the overlayfs inodes use arbitrary inode numbers that are not
correlated with the values of st_ino/d_ino, NFSv3 falls back to not
encoding d_type. Although this is an allowed behavior, we can fix it for
the case of all overlayfs layers on the same underlying filesystem.

When NFS export is enabled and d_ino is consistent with st_ino
(samefs), set the same value also to i_ino in ovl_fill_inode() for all
overlayfs inodes, nfsd readdirplus sanity checks will pass.
ovl_fill_inode() may be called from ovl_new_inode(), before real inode
was created with ino arg 0. In that case, i_ino will be updated to real
upper inode i_ino on ovl_inode_init() or ovl_inode_update().
Reported-by: default avatarEddie Horng <eddiehorng.tw@gmail.com>
Tested-by: default avatarEddie Horng <eddiehorng.tw@gmail.com>
Signed-off-by: default avatarAmir Goldstein <amir73il@gmail.com>
Fixes: 8383f174 ("ovl: wire up NFS export operations")
Cc: <stable@vger.kernel.org> #v4.16
Signed-off-by: default avatarMiklos Szeredi <mszeredi@redhat.com>
      695b46e7
  3. 25 Mar, 2018 10 commits
  5. 24 Mar, 2018 1 commit
  7. 23 Mar, 2018 23 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7