- 18 Apr, 2016 3 commits
-
-
Ville Syrjälä authored
When a vblank wait times out in intel_atomic_wait_for_vblanks() we just get a cryptic 'WARN_ON(!ret)' backtrace in dmesg. Repace it with something that tells you what actually happened. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460978973-24945-1-git-send-email-ville.syrjala@linux.intel.comReviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
-
Chris Wilson authored
The legacy cursor ioctl expects to be asynchronous with respect to other screen updates, in particular page flips. As X updates the cursor from a signal context, if the cursor blocks then it will stall both the input and output chains causing bad stuttering and horrible UX. Reported-and-tested-by:
Rafael Ristovski <rafael.ristovski@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94980 Fixes: 5008e874 ("drm/i915: Make wait_for_flips interruptible.") Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Link: http://patchwork.freedesktop.org/patch/msgid/1460922166-20292-1-git-send-email-chris@chris-wilson.co.ukAcked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Jani Nikula authored
Due to "some hardware limitation" the DPI enable bit in port C control register does not get set on VLV. As a workaround we check the status in pipe B conf register instead. The workaround was added in commit c0beefd2 Author: Gaurav K Singh <gaurav.k.singh@intel.com> Date: Tue Dec 9 10:59:20 2014 +0530 drm/i915: Software workaround for getting the HW status of DSI Port C on BYT Empirical evidence (on Surface 3 with DSI on port C per VBT) shows that this is the case also on CHV, so extend the workaround to CHV. We still have the device ready register check in place, so this should not get confused with e.g. HDMI on pipe B. This fixes a number of state checker warnings on CHV DSI port C. Cc: stable@vger.kernel.org Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1460724451-13810-1-git-send-email-jani.nikula@intel.com
-
- 15 Apr, 2016 25 commits
-
-
Tvrtko Ursulin authored
Show a total and purgeable number of pin mapped objects and their total and purgeable size. Example output (new stat prefixed with a star): # cat i915_gem_objects 19920 objects, 289243136 bytes 19920 [18466] objects, 288714752 [267911168] bytes in gtt 0 [0] active objects, 0 [0] bytes 19917 [18466] inactive objects, 288714752 [267911168] bytes 0 unbound objects, 0 bytes 0 purgeable objects, 0 bytes 1 pinned mappable objects, 3145728 bytes 0 fault mappable objects, 0 bytes * 19914 [0] pin mapped objects, 285560832 [0] bytes [purgeable] 4294967296 [268435456] gtt total Signed-off-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Tvrtko Ursulin authored
Reflect the status of obj->mapping as added with the i915_gem_object_pin_map API. 'M' was chosen to designate the pin mapped status. Signed-off-by:
-
Ville Syrjälä authored
We don't have a LVDS_BORDER_ENABLE type of bit for either eDP or DSI, and just trying to frob the display timings to include borders results in a corrupted picture. So reject the 'Center' scaling mode on GMCH platforms for eDP and DSI. TODO: Should really filter out the unsupported modes from the prop, but that would be fairly invasive since the prop is now created and stored by drm core. So leave it for a rainy day. Signed-off-by:
-
Ville Syrjälä authored
Add the scaling mode property to DSI connectors, handle changes in the property value, and compute the panel fitter state during .compute_config(). v2: Handle BXT as well Signed-off-by:
-
Ville Syrjälä authored
Fold the DSI PLL configuration functions into the DSI PLL enable functions since they are small and not called from anywhere else. Signed-off-by:
-
Ville Syrjälä authored
Compute the DSI PLL parameters during .compute_config() rather than .pre_pll_enable() so that we can fail gracefully if we can't find suitable parameters. In order to do that we need to store the DSI PLL parameters in pipe_config. v2: Handle BXT too Signed-off-by:
-
Ville Syrjälä authored
Set up DPLL and DPLL_MD even when driving DSI output on VLV/CHV. While the DPLL isn't used to provide the clock we still need the refclock, and it appears that the pixel repeat factor also has an effect on DSI output. So set up eveyrhing in DPLL and DPLL_MD as we would do for DP/HDMI/VGA, but don't actually enable the DPLL or configure the dividers via DPIO. Signed-off-by:
-
Dongwon Kim authored
This patch is to correct one thing in this commit: commit 25a56705 Author: Dongwon Kim <dongwon.kim@intel.com> Date: Wed Mar 16 18:06:13 2016 -0700 drm/i915/bxt: Reversed polarity of PORT_PLL_REF_SEL bit This reversed bit polarity is actually common for all BXT and APL SoCs. Therefore, revision checking in the original commit should be removed to make the bit set regardless of revision ID of GFX block. Signed-off-by:
Dongwon Kim <dongwon.kim@intel.com> Reviewed-by:
Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Imre Deak authored
With the preceding fixes runtime PM should be functional, I could runtime suspend/resume the device without problems. Signed-off-by:
David Weinehall <david.weinehall@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-17-git-send-email-imre.deak@intel.com
-
Imre Deak authored
With the preceding fixes power well support should be functional on Broxton, I could enter/exit DC5 without problems. This reverts commit 18024199. CC: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Imre Deak authored
I caught a few errors in our current PHY/CDCLK programming by sanity checking the actual programmed state, so I thought it would be also useful for the future. In addition to verifying the state after programming it also verify it after exiting DC5, to make sure DMC restored/kept intact everything related. v2: - Inlining __phy_reg_verify_state() doesn't make sense and also incorrect, so don't do it (PW/CI gcc) v3: - Rebase on latest -nightly Signed-off-by:
-
Imre Deak authored
If BIOS has already programmed and enabled a PHY, don't reprogram it as that may interfere with the currently active outputs. A follow-up patch will add state verification, so we can catch any misconfiguration on BIOS's behalf. Signed-off-by:
-
Imre Deak authored
When determining whether CDCLK is enabled by BIOS and so we should skip reprogramming it, we didn't check the related DBUF power request and state. In theory BIOS could enable one without the other so check for this case and reprogram things if something is amiss. Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459515767-29228-13-git-send-email-imre.deak@intel.com
-
Imre Deak authored
Power well 1 is managed by the DMC firmware so don't toggle it on-demand from the driver. This means we need to follow the BSpec display initialization sequence during driver loading and resuming (both system and runtime) and enable power well 1 only once there. Afterwards DMC will toggle power well 1 whenever entering/exiting DC5. For this to work we also need to do away getting the PLL power domain, since that just kept runtime PM disabled for good. Signed-off-by:
-
Imre Deak authored
The power-down step logically belongs to the individual PHY uninit sequence so move it there. The only functional change is that we will power down now PHY 1 separately before PHY 0 and preserve the other bits in the register which are defined as reserved. Signed-off-by:
-
Imre Deak authored
For internal APIs passing dev_priv is preferred to reduce indirections, so convert over a few DDI PHY, CDCLK helpers. No functional change. Signed-off-by:
-
Imre Deak authored
On Broxton we need to enable/disable power well 1 during the init/unit display sequence similarly to Skylake/Kabylake. The code for this will be added in a follow-up patch, but to prepare for that unexport skl_pw1_misc_io_init(). It's a simple function called only from a single place and having it inlined in the Skylake display core init/unit functions will make it easier to compare it with its Broxton counterpart. This also flips the order of Misc IO and power well 1 disabling which matches the enabling order. The specification doesn't prescribe the disabling order, so this should be fine. v2: - Fix incorrect enable vs. disable power well call in skl_display_core_uninit() (Patrik) - Add commit comment about chaning the order of PW1 and Misc IO power well disabling (Patrik) CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459773777-10701-1-git-send-email-imre.deak@intel.com
-
Imre Deak authored
On SKL/KBL suspend-to-idle (aka freeze/s0ix) is performed with DMC firmware assistance where the target display power state is DC6. On Broxton on the other hand we don't use the firmware for this, but rely instead on a manual DC9 flow. For this we have to uninitialize the display following the BSpec display uninit sequence, just as during S3/S4, so make sure we follow this sequence. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
The display power well support and DC state management doesn't depend on runtime PM support, so remove the incorrect asserts about this. Also Broxton does support DC5, so the related assert in assert_can_enable_dc5() is incorrect. There is a more generic and correct assert for this already in gen9_set_dc_state(), so we can remove all the other ones. At the same time convert WARNs to WARN_ONCE for consistency with the other DC state asserts. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
So far we only power well enabling was synchronous not disabling. Since we don't exactly know how the firmware (both DMC and PCU) synchronizes against the actual power well state during DC transitions, make the disabling also synchronous. CC: Mika Kuoppala <mika.kuoppala@linux.intel.com> CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
DMC forces on power well 1 and the misc IO power well by setting the corresponding request bits both in the BIOS and the DEBUG power well request registers. This is somewhat unexpected since the firmware should really just save and restore state but not alter it. We also depend on being able to disable power well 1, and the misc IO power well before entering S3/S4 on BXT and SKL or entering DC9 on BXT. To fix this make sure these request bits are cleared whenever we want to disable the given power wells. On SKL there is another twist where the firmware also clears the power well 1 request bit in HSW_POWER_WELL_DRIVER (but not that of the misc IO power well). This happens to not cause a problem due to the forced-on request bits in the other request registers. I've filed a bug about all this, but fixing that may take a while and having this sanity check in place makes sense even for future firmware versions. At the same time also check the KVMR request bits. I haven't seen this being altered, but we don't expect any request bits in here either, so sanitize this register as well. v2: - Apply the workaround on SKL as well. I noticed the related failure from the CI report, later Patrik also reported seeing it on his machine. CC: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Signed-off-by:
-
Imre Deak authored
This register is read-only, so we have never actually set OCL2_LDOFUSE_PWR_DIS in it as specified by the specification. Add a code comment about this. I filed a specification update request to clarify this there. CC: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
-
Imre Deak authored
This has been corrected in BSpec quite some time ago, but we missed it somehow. The wrong field definitions resulted in configuring PHY0 with an incorrect GRC value. v2: - Remove the FIXME comment, we left in the code exactly about this issue. (Ville) CC: Arthur J Runyan <arthur.j.runyan@intel.com> Signed-off-by:
-
Imre Deak authored
DMC version 1.06 has a known bug, where the firmware polls forever for a port PLL to lock, if the PLL was disabled when entering DC5, which locks up the machine. Version 1.07 fixes this, so make that the minimum required version on BXT. CC: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
-
Gustavo Padovan authored
Replace the legacy drm_send_vblank_event() with the new helper function. Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
- 14 Apr, 2016 12 commits
-
-
Ville Syrjälä authored
HSW still has the wake FIFO, so let's check it. Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Deepak S <deepak.s@linux.intel.com> Fixes: 05a2fb15 ("drm/i915: Consolidate forcewake code") Signed-off-by:
-
Ville Syrjälä authored
As we did on VLV, split the gt irq handling to ack and handler phases on CHV. Leave the BDW+ codepath mostly intact for now. Signed-off-by:
-
Ville Syrjälä authored
It looks silly to pass both dev and dev_priv to the snb/ilk gt irq handlers. Just pass dev_priv. Signed-off-by:
-
Ville Syrjälä authored
No need to actually handle the GT/PM interrupt while we have interrupt sources disabled. Move the actual processing to happen after we've restored VLV_IER and master interrupt enable. Signed-off-by:
-
Ville Syrjälä authored
Minimize the amount of stuff we do with interrupt sources disabled by splitting the PIPESTAT irq handling into ack+handler phases. Signed-off-by:
-
Ville Syrjälä authored
Split the VLV/CHV hoplug irq handling to ack and handler phases. This way we can move the actual irq handling outside the section where we have disabled the interrupt sources. For now, we leave things as is for pre-VLV GMCH platforms, but eventually they could get the same treatment. Signed-off-by:
-
Ville Syrjälä authored
Signed-off-by:
-
Ville Syrjälä authored
Now that we've dealt with the races in clearing IIR bits via VLV_IER and the master interrupt enable, we can go ahead aliminate the loop from the VLV interrupt handler. Signed-off-by:
-
Ville Syrjälä authored
On VLV/CHV the master interrupt enable bit only affects GT/PM interrupts. Display interrupts are not affected by the master irq control. Also it seems that the CPU interrupt will only be generated when the combined result of all GT/PM/display interrupts has a 0->1 edge. We already use the master interrupt enable bit to make sure GT/PM interrupt can generate such an edge if we don't end up clearing all IIR bits. We must do the same for display interrupts, and for that we can simply clear out VLV_IER, and restore after we've acked all the interrupts we are about to process. So with both master interrupt enable and VLV_IER cleared out, we will guarantee that there will be a 0->1 edge if any IIR bits are still set at the end, and thus another CPU interrupt will be generated. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 579de73b ("drm/i915: Exit cherryview_irq_handler() after one pass") Signed-off-by:
-
Ville Syrjälä authored
Like on CHV, let's clear out the master irq enable bit when we ack GT/PM interrupts. This will allow GT/PM interrupts to re-raise the CPU interrupt if we fail to clear all the bits from the IIR(s). Signed-off-by:
-
Ville Syrjälä authored
On VLV/CHV VLV_IIR is not double double buffered, and it doesn't detect edges from PIPESTAT & co. like it does on gen4. Instead it just directly latches the level from PIPESTAT & co. That means we must clear VLV_IIR after PIPESTAT & co. or else we'll get a spurious bit in VLV_IIR every single time. Signed-off-by:
-
Ville Syrjälä authored
We're lacking VLV_MASTER_IER setup from valleyview_irq_preinstall(), so add it there. Also cargo cult in some POSTING_READ()s to match the other platforms. Signed-off-by:
-
