- 09 Mar, 2016 4 commits
-
-
Matthew R. Ochs authored
The cxlflash_disk_attach() routine currently uses a cascading error gate strategy for its error cleanup path. While this strategy is commonly used to handle cleanup scenarios, it is too restrictive when function callouts need to be restructured. Problems range from inserting error path bugs in previously 'good' code to the cleanup path imposing design changes to how the normal path is structured. A less restrictive approach is needed to support ordering changes that come about when operating in different environments. To overcome this restriction, the error cleanup path is modified to have a single entrypoint and use conditional logic to cleanup where necessary. Entities that require multiple cleanup steps must be carefully vetted to ensure their APIs support state. In cases where they do not (none as of this commit) additional local variables can be used to maintain state on their behalf. Signed-off-by:
Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Reviewed-by:
Uma Krishnan <ukrishn@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Matthew R. Ochs authored
Presently, context information structures are allocated and initialized in the same routine, create_context(). This imposes an ordering restriction such that all pieces of information needed to initialize a context must be known before the context is even allocated. This design point is not flexible when the order of context creation needs to be modified. Specifically, this can lead to problems when members of the context information structure are a part of an ordering dependency (i.e. - the 'work' structure embedded within the context). To remedy, the allocation is left as-is, inside of the existing create_context() routine and the initialization is transitioned to a new void routine, init_context(). At the same time, in anticipation of these routines not being called in sequence, a state boolean is added to the context information structure to track when the context has been initilized. The context teardown routine, destroy_context(), is modified to support being called with a non-initialized context. Signed-off-by:
-
Uma Krishnan authored
When operating in the PowerVM environment, the cxlflash module can receive an error from the hypervisor indicating that there are existing mappings in the page table for the process MMIO space. This issue exists because term_afu() currently invokes term_mc() before stop_afu(), allowing for the master context to be detached first and the problem state area to be unmapped second. To resolve this issue, stop_afu() should be called before term_mc(). Signed-off-by:
-
Manoj N. Kumar authored
The calls to pci_request_regions(), pci_resource_start(), pci_set_dma_mask(), pci_set_master() and pci_save_state() are all unnecessary for the IBM CXL flash adapter since data buffers are not required to be mapped to the device's memory. The use of services such as pci_set_dma_mask() are problematic on hypervisor managed systems as the IBM CXL flash adapter is operating under a virtual PCI Host Bridge (virtual PHB) which does not support these services. cxlflash 0001:00:00.0: init_pci: Failed to set PCI DMA mask rc=-5 The resolution is to simplify init_pci(), to a point where it does the bare minimum (pci_enable_device). Similarly, remove the call the pci_release_regions() from cxlflash_remove(). Signed-off-by:
Manoj N. Kumar <manoj@linux.vnet.ibm.com> Acked-by:
-
- 08 Mar, 2016 1 commit
-
-
Lars-Peter Clausen authored
Calling synchronize_irq() right before free_irq() is quite useless. On one hand the IRQ can easily fire again before free_irq() is entered, on the other hand free_irq() itself calls synchronize_irq() internally (in a race condition free way), before any state associated with the IRQ is freed. Patch was generated using the following semantic patch: // <smpl> @@ expression irq; @@ -synchronize_irq(irq); free_irq(irq, ...); // </smpl> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Reviewed-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Signed-off-by:
-
- 05 Mar, 2016 9 commits
-
-
Hannes Reinecke authored
'device_add' will be evaluating the 'is_visible' callback when creating the sysfs attributes. As by this time the device handler has not been attached the 'access_state' attribute will never be visible. This patch moves the code around so that the device handler is present by the time 'is_visible' is evaluated to correctly display the 'access_state' attribute. Signed-off-by:
Hannes Reinecke <hare@suse.de> Reviewed-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Bart van Assche <bart.vanassche@sandisk.com> Signed-off-by:
-
Hannes Reinecke authored
Update the 'access_state' field of the SCSI device whenever the path state changes. Signed-off-by:
-
Hannes Reinecke authored
Track attached SCSI devices and update the 'access_state' whenever the path state of the device changes. Signed-off-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Hannes Reinecke authored
Track attached SCSI devices and update the 'access_state' field whenever an ALUA state change has been detected. Signed-off-by:
Ewan Milne <emilne@redhat.com> Reviewed-by:
-
Hannes Reinecke authored
scsi_proto.h now contains definitions for the ALUA state, so we don't have to carry them in the device handler. Signed-off-by:
-
Hannes Reinecke authored
Add an 'access_state' field to struct scsi_device and display them in sysfs as 'access_state' and 'preferred_path' attribute. Signed-off-by:
-
Hannes Reinecke authored
Add 'is_bin_visible' callback to blank out unsupported vpd pages. Reviewed-by:
Shane Seymour <shane.seymour@hpe.com> Reviewed-by:
-
Arnd Bergmann authored
The mvumi scsi hides the references to its suspend/resume functions in an #ifdef but does not hide the implementation the same way: drivers/scsi/mvumi.c:2632:12: error: 'mvumi_suspend' defined but not used [-Werror=unused-function] drivers/scsi/mvumi.c:2651:12: error: 'mvumi_resume' defined but not used [-Werror=unused-function] This adds __maybe_unused annotations so the compiler knows it can silently drop them instead of warning, while avoiding the addition of another #ifdef. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
-
K. Y. Srinivasan authored
tree: https://na01.safelinks.protection.outlook.com/?url=https%3a%2f%2fgit.kernel.org%2fpub%2fscm%2flinux%2fkernel%2fgit%2ftorvalds%2flinux.git&data=01%7c01%7ckys%40microsoft.com%7ce2e0622715844b79ad7108d32796ec3c%7c72f988bf86f141af91ab2d7cd011db47%7c1&sdata=ubr4GbBaNS%2ftOz%2buJBk0CL9N0UNG9x2TidLgy6Yovg4%3d master head: 03c21cb7 commit: dac58241 storvsc: Properly support Fibre Channel devices date: 3 weeks ago config: x86_64-randconfig-s3-01281016 (attached as .config) reproduce: git checkout dac58241 # save the attached .config to linux build tree make ARCH=x86_64 All errors (new ones prefixed by >>): drivers/built-in.o: In function `storvsc_remove': >> storvsc_drv.c:(.text+0x213af7): undefined reference to `fc_remove_host' drivers/built-in.o: In function `storvsc_drv_init': >> storvsc_drv.c:(.init.text+0xcbcc): undefined reference to `fc_attach_transport' >> storvsc_drv.c:(.init.text+0xcc06): undefined reference to `fc_release_transport' drivers/built-in.o: In function `storvsc_drv_exit': >> storvsc_drv.c:(.exit.text+0x123c): undefined reference to `fc_release_transport' With this commit, the storvsc driver depends on FC atttributes. Make this dependency explicit. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
- 02 Mar, 2016 2 commits
-
-
Colin Ian King authored
The snic version number is expected to be 4 decimals in the form like a netmask string with each number stored in an element in array v. However, there is an off-by-one check on the number of elements in v allowing one to pass a 5 decimal version number causing v[4] to be referenced, causing a buffer overrun. Fix the off-by-one error by comparing to i > 3 rather than 4. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
-
Amitoj Kaur Chawla authored
The return value of of_ioremap on failure should be -ENODEV and not -1. Found using Coccinelle. A simplified version of the semantic patch used is: //<smpl> @@ expression *e; @@ e = of_ioremap(...); if (e == NULL) { ... return - -1 + -ENODEV ; } //</smpl> The single call site only checks that the return value is less than 0, hence no change is required at the call site. Signed-off-by:Amitoj Kaur Chawla <amitoj1606@gmail.com> Reviewed-by:
-
- 01 Mar, 2016 14 commits
-
-
Finn Thain authored
This bug causes the wrong command to have its sense pointer overwritten, which sometimes leads to a NULL pointer deref. Fix this by checking which command is being requeued before restoring the scsi_eh_save data. It turns out that some targets will disconnect a REQUEST SENSE command. The autosense algorithm doesn't anticipate this. Hence multiple commands can end up undergoing autosense simultaneously, and they will all try to use the same scsi_eh_save struct, which won't work. Defer autosense when the scsi_eh_save storage is in use by another command. Fixes: f27db8eb ("ncr5380: Fix autosense bugs") Reported-and-tested-by:
Michael Schmitz <schmitzmic@gmail.com> Cc: <stable@vger.kernel.org> # 4.5 Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Signed-off-by:
-
Finn Thain authored
Add missing checks for EH abort during arbitration and selection. Rework the handling of NCR5380_select() result to improve clarity. Fixes: 707d62b3 ("ncr5380: Fix EH during arbitration and selection") Tested-by:
-
Finn Thain authored
The list structures and related logic used in the NCR5380 driver mean that a command cannot be queued twice (i.e. can't appear on more than one queue and can't appear on the same queue more than once). The abort handler must forget the command so that the mid-layer can re-use it. E.g. the ML may send it back to the LLD via via scsi_eh_get_sense(). Fix this and also fix two error paths, so that commands get forgotten iff completed. Fixes: 8b00c3d5 ("ncr5380: Implement new eh_abort_handler") Tested-by:
-
Finn Thain authored
Calling NCR5380_select() from the abort handler causes various problems. Firstly, it means potentially re-entering NCR5380_select(). Secondly, it means that the lock is released, which permits the EH handlers to be re-entered. The combination results in crashes. Don't do it. Fixes: 8b00c3d5 ("ncr5380: Implement new eh_abort_handler") Reported-and-tested-by:
-
Finn Thain authored
The calls to NCR5380_transfer_pio() for DATA IN and DATA OUT phases will modify cmd->SCp.this_residual, cmd->SCp.ptr and cmd->SCp.buffer. That works as long as EH does not intervene, which became possible in atari_NCR5380.c when I changed the locking to bring it closer to NCR5380.c. If error recovery aborts the command, the scsi_cmnd in question and its buffer will be returned to the mid-layer. So the transfer has to cease, but it can't be stopped by the initiator because the target controls the bus phase. The problem does not arise if the lock is not released. That was fine for atari_scsi, because it implements DMA. For the other drivers, we have to release the lock and re-enable interrupts for long PIO data transfers. The solution is to split the transfer into small chunks. In between chunks the main loop releases the lock and re-enables interrupts. Thus interrupts can be serviced and eh_bus_reset_handler can intervene if need be. This fixes an oops in NCR5380_transfer_pio() that can happen when the EH abort handler is invoked during DATA IN or DATA OUT phase. Fixes: 11d2f63b ("ncr5380: Change instance->host_lock to hostdata->lock") Reported-and-tested-by:
-
Finn Thain authored
Commands subject to exception handling are to be returned to the scsi mid-layer. Make sure that the various command pointers and command lists in the low-level driver are correctly cleansed of affected commands. This fixes some bugs that I accidentally introduced in v4.5-rc1 including the removal of INIT_LIST_HEAD for the 'autosense' and 'disconnected' command lists, and the possible NULL pointer dereference in NCR5380_bus_reset() that was reported by Dan Carpenter. hostdata->sensing may also point to an affected command so this pointer also has to be cleared. The abort handler calls complete_cmd() to take care of this; let's have the bus reset handler do the same. The issue queue may also contain an affected command. If so, remove it. This also follows the abort handler logic. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Fixes: 62717f53 ("ncr5380: Implement new eh_bus_reset_handler") Tested-by:
-
Nicholas Krause authored
This adds the missing error check and path for if the call to the function hwi_init_controller fails as this error path was clearly missed when writing beiscsi_eeh_resume and thus we must add it now in order to be able to handle this nonrecoverable failing function call gracefully in beiscsi_eeh_resume. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Reviewed-by:
-
Usha Ketineni authored
Do not reset fip selection time for every advertisement in fcoe_ctlr_recv_adv() but set it only once for the first validated FCF. Otherwise FCF selection won't happen when the advertisements consistently arrive with sub FCOE_CTLR_START_DELAY periodicity. Tested-by:
Narendra K <narendra_k@dell.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Reviewed-by:
Vasu Dev <vasu.dev@intel.com> Signed-off-by:
Usha Ketineni <usha.k.ketineni@intel.com> Signed-off-by:
-
John Garry authored
Signed-off-by:
John Garry <john.garry@huawei.com> Reviewed-by:
-
John Garry authored
In high-datarate aging tests, it is found that the SCSI framework can periodically issue lu resets as some commands timeout. Response TASK SET FULL and SAS_QUEUE_FULL may be returned many times for the same command, causing the timeouts. The SAS_QUEUE_FULL errors come from TRANS_TX_CREDIT_TIMEOUT_ERR, TRANS_TX_CLOSE_NORMAL_ERR, and TRANS_TX_ERR_FRAME_TXED errors. They do not mean that the queue is full in the host, but rather it is equivalent to meaning the queue is full for the sdev. To overcome this, the queue depth for the sdev is reduced to 64 (from 256, set in sas_slave_configure()). Normally error code SAS_QUEUE_FULL will result in the sdev queue depth falling, but it falls too slowly during high-datarate tests and commands timeout before it has fallen to an adequete level from original value. Signed-off-by:
-
John Garry authored
When TRANS_TX_ERR_FRAME_TXED error occurs in a slot, the command should be re-attempted. This error is equivalent to meaning that the queue is full in the sdev (and not the host). A superflous debug statement is also removed in the slot complete handler. Signed-off-by:
-
John Garry authored
When TRANS_TX_CREDIT_TIMEOUT_ERR or TRANS_TX_CLOSE_NORMAL_ERR error occur in a slot, the command should be re-attempted. This error is equivalent to meaning that the queue is full in the sdev (and not the host). Signed-off-by:
-
John Garry authored
Add a function to abort a slot (task) in the target device and then cleanup and complete the task. The function is called from work queue context as it cannot be called from the context where it is triggered (interrupt). Flag hisi_sas_slot.abort is added as the flag used in the slot error handler to indicate whether the slot needs to be aborted in the sdev prior to cleanup and finish. Signed-off-by:
-
John Garry authored
In hisi_sas_exec_internal_tmf_task(), the check for SAM_STAT_GOOD is replaced with TMF_RESP_FUNC_COMPLETE, which is a genuine tmf response code. SAM_STAT_GOOD and TMF_RESP_FUNC_COMPLETE have the same value, so this is why it worked before. Signed-off-by:
-
- 26 Feb, 2016 3 commits
-
-
Alison Schofield authored
struct timeval will overflow on 32-bit systems in y2038 and is being removed from the kernel. Replace the use of struct timeval and do_gettimeofday() with ktime_get_real_seconds() which provides a 64-bit seconds value and is y2038 safe. gdth driver requires changes in two areas: 1) gdth_store_event() loads two u32 timestamp fields for ioctl GDTIOCTL_EVENT These timestamp fields are part of struct gdth_evt_str used for passing event data to userspace. At the first instance of an event we do (first_stamp=last_stamp="current time"). If that same event repeats, we do (last_stamp="current time") AND increment same_count to indicate how many times the event has repeated since first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to extend the timestamp fields to y2106. Beyond y2106, the userspace tools (ie. RAID controller monitors) can work around the time rollover and this driver would still not need to change. Alternative: The alternative approach is to introduce a new ioctl in gdth with the u32 time fields defined as u64. This would require userspace changes now, but not in y2106. 2) gdth_show_info() calculates elapsed time using u32 first_stamp It is adding events with timestamps to a seq_file. Timestamps are calculated as the "current time" minus the first_stamp. This patch replaces the use of timeval and do_gettimeofday() with ktime_get_real_seconds() cast to u32 to calculate the timestamp. This elapsed time calculation is safe even when the time wraps (beyond y2106) due to how unsigned subtraction works. A comment has been added to the code to indicate this safety. Alternative: This piece itself doesn't warrant an alternative, but if we do introduce a new structure & ioctl with u64 timestamps, this would change accordingly. Signed-off-by:Alison Schofield <amsfield22@gmail.com> Reviewed-by:
-
Sudip Mukherjee authored
The variable is_ver1 is always true and so OSD_CAP_LEN can never be used. Reported by Coverity. Signed-off-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Reviewed-by:
Boaz harrosh <ooo@elecrozaur.com> Signed-off-by:
-
Sudip Mukherjee authored
parport_claim() can fail and we should be checking if we were able to claim the port. Signed-off-by:
-
- 24 Feb, 2016 7 commits
-
-
Charles authored
Add S3/S4 support, add .suspend and .resume function in pci_driver. In .suspend handler, driver send S3/S4 signal to the device. Signed-off-by:
Charles Chiou <charles.chiou@tw.promise.com> Reviewed-by:
-
Charles authored
1. Add hotplug support. Pegasus support surprise removal. To this end, I use return_abnormal_state function to return DID_NO_CONNECT for all commands which sent to driver. 2. Remove stex_hba_stop in stex_remove because we cannot send command to device after hotplug. 3. Add new device status: MU_STATE_STOP, MU_STATE_NOCONNECT, MU_STATE_STOP. MU_STATE_STOP is currently not referenced. MU_STATE_NOCONNECT represent that device is plugged out from the host. 4. Use return_abnormal_function() to substitute part of code in stex_do_reset. Signed-off-by:
-
Charles authored
Pegasus is a high performace hardware RAID solution designed to unleash the raw power of Thunderbolt technology. 1. Add code to distinct SuperTrack and Pegasus series by sub device ID. It should support backward compatibility. 2. Change the driver version. Signed-off-by:
-
Don Brace authored
Reviewed-by:
Kevin Barnett <kevin.barnett@microsemi.com> Reviewed-by:
Justin Lindley <justin.lindley@microsemi.com> Reviewed-by:
Don Brace <don.brace@microsemi.com> Signed-off-by:
-
Don Brace authored
Reviewed-by:
-
Don Brace authored
This patch depends on patch - commit ac10a3e4ed64 ("Export function scsi_scan.c:sanitize_inquiry_string") Suggested-by:Mahesh Rajashekhara <mahesh.rajashekhara@microsemi.com> Reviewed-by:
Scott Teel <scott.teel@microsemi.com> Reviewed-by:
-
Don Brace authored
An oops can occur when submitting ioaccel2 commands when the phys_disk pointer is NULL in hpsa_scsi_ioaccel_raid_map. Happens when there are configuration changes during I/O operations. If the phys_disk pointer is NULL, send the command down the RAID path. Reviewed-by:
-
