- 09 Dec, 2015 6 commits
-
-
Stefan Hajnoczi authored
This reverts commit 0d76d6e8 and merge commit c402293b, reversing changes made to c89359a4. The virtio-vsock device specification is not finalized yet. Michael Tsirkin voiced concerned about merging this code when the hardware interface (and possibly the userspace interface) could still change. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sergei Shtylyov says: ==================== sh_eth: optimize MDIO code Here's a set of 3 patches against DaveM's 'net-next.git' repo which gets rid of ~35 LoCs in the MDIO bitbang methods. ==================== Signed-off-by: -
Sergei Shtylyov authored
After the MDIO bitbang code consolidation, there's no need anymore for bb_{set|clr}() as well as bb_read() -- just expand them inline, thus saving more LoCs... Signed-off-by:Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Sergei Shtylyov authored
sh_mm[cd]_ctrl() and sh_set_mdio() all look mostly the same -- factor out their common code and put it into sh_mdio_ctrl(). Signed-off-by:
-
Sergei Shtylyov authored
The MDIO control bits are always mapped to the same bits of the same register (PIR), so there's no need to store their masks in the 'struct bb_info'... Signed-off-by:
-
Julia Lawall authored
The xgene_mac_ops and xgene_port_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by:
Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by:
-
- 08 Dec, 2015 2 commits
-
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2015-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Vallo says: ==================== brcfmac * support bcm4359 which can operate in two bands concurrently * disable runtime pm for USB avoiding issues * use generic pm callback in PCIe driver * support wowlan wake indication reporting * add beamforming support * unified handling of firmware files ath10k * support Manegement Frame Protection (MFP) * add thermal throttling support for 10.4 firmware * add support for pktlog in QCA99X0 * add debugfs file to enable Bluetooth coexistence feature * use firmware's native mesh interface type instead of raw mode iwlwifi * BT coex improvements * D3 operation bugfixes * rate control improvements * firmware debugging infra improvements * ground work for multi Rx * various security fixes ==================== Conflicts: drivers/net/wireless/ath/ath10k/pci.c The conflict resolution at: http://article.gmane.org/gmane.linux.kernel.next/37391 by Stephen Rothwell was used. Signed-off-by:
-
Rainer Weikusat authored
As the kernel generally uses negated error numbers, *err needs to be compared with -EAGAIN (d'oh). Signed-off-by:
Rainer Weikusat <rweikusat@mobileactivedefense.com> Fixes: ea3793ee ("core: enable more fine-grained datagram reception control") Signed-off-by:
-
- 07 Dec, 2015 24 commits
-
-
LABBE Corentin authored
the simple_strtoul function is obsolete. This patch replace it by kstrtox. Signed-off-by:
LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by:
-
David S. Miller authored
Neil Armstrong says: ==================== Further fix for dsa unbinding This series fixes further issues for DSA dynamic unbinding. The first patch completely removes the PHY link state polling. The two following cleans up the dsa state upon removal. The last patch moves slave destroy code as slave function and adds missing netdev and phy cleanup calls. v1: http://lkml.kernel.org/r/562F8ECB.6050709@baylibre.com v2: http://lkml.kernel.org/r/56321D9A.8010109@baylibre.com remove phy fix and add missing calls in dsa_switch_destroy then add dedicated dsa_slave_destroy v3: remove polling instead of fixing it, make single patch for dsa slave destroy ==================== Acked-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Neil Armstrong authored
Move dsa slave dedicated code from dsa_switch_destroy to a new dsa_slave_destroy function in slave.c. Add the netif_carrier_off and phy_disconnect calls in order to correctly cleanup the netdev state and PHY state machine. Signed-off-by:
Frode Isaksen <fisaksen@baylibre.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
Upon probe failure or unbinding, add missing dev_put() calls. Signed-off-by:
-
Neil Armstrong authored
Make sure that we unassign the master_netdev dsa_ptr to make the packet processing go through the regular Ethernet receive path. Suggested-by:
-
Neil Armstrong authored
Since no more DSA driver uses the polling callback, and since the phylib handles the link detection, remove the link polling work and timer code. Signed-off-by:
-
David S. Miller authored
Merge tag 'mac80211-next-for-davem-2015-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This pull request got a bit bigger than I wanted, due to needing to reshuffle and fix some bugs. I merged mac80211 to get the right base for some of these changes. * new mac80211 API for upcoming driver changes: EOSP handling, key iteration * scan abort changes allowing to cancel an ongoing scan * VHT IBSS 80+80 MHz support * re-enable full AP client state tracking after fixes * various small fixes (that weren't relevant for mac80211) * various cleanups ==================== Signed-off-by:
-
David S. Miller authored
Sunil Goutham says: ==================== net: thunderx: Miscellaneous cleanups This patch series contains contains couple of cleanup patches. ==================== Signed-off-by: -
Sunil Goutham authored
Since we have moved on to using allocated pages to carve receive buffers instead of netdev_alloc_skb() there is no need to store any pointers for later retrieval. Earlier we had to store skb and skb->data pointers which later are used to handover received packet to network stack. This will avoid an unnecessary cache miss as well. Signed-off-by:
Sunil Goutham <sgoutham@cavium.com> Signed-off-by:
-
Yury Norov authored
The same switch-case repeates for nivc_*_intr functions. In this patch it is moved to a helper nicvf_int_type_to_mask(). By the way: - Unneeded write to NICVF register dropped if int_type is unknown. - netdev_dbg() is used instead of netdev_err(). Signed-off-by:
Yury Norov <yury.norov@auriga.com> Signed-off-by:
Aleksey Makarov <aleksey.makarov@caviumnetworks.com> Acked-by:
Vadim Lomovtsev <Vadim.Lomovtsev@caiumnetworks.com> Signed-off-by:
-
Ilan Peer authored
In case of HW ROC, when the driver reports that the ROC expired, it is not sufficient to purge the ROCs based on the remaining time, as it possible that the device finished the ROC session before the actual requested duration. To handle such cases, in case of ROC expired notification from the driver, complete all the ROCs which are marked with hw_begun, regardless of the remaining duration. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Rainer Weikusat authored
The current unix_dgram_recvsmg code acquires the u->readlock mutex in order to protect access to the peek offset prior to calling __skb_recv_datagram for actually receiving data. This implies that a blocking reader will go to sleep with this mutex held if there's presently no data to return to userspace. Two non-desirable side effects of this are that a later non-blocking read call on the same socket will block on the ->readlock mutex until the earlier blocking call releases it (or the readers is interrupted) and that later blocking read calls will wait longer than the effective socket read timeout says they should: The timeout will only start 'ticking' once such a reader hits the schedule_timeout in wait_for_more_packets (core.c) while the time it already had to wait until it could acquire the mutex is unaccounted for. The patch avoids both by using the __skb_try_recv_datagram and __skb_wait_for_more packets functions created by the first patch to implement a unix_dgram_recvmsg read loop which releases the readlock mutex prior to going to sleep and reacquires it as needed afterwards. Non-blocking readers will thus immediately return with -EAGAIN if there's no data available regardless of any concurrent blocking readers and all blocking readers will end up sleeping via schedule_timeout, thus honouring the configured socket receive timeout. Signed-off-by:
-
Rainer Weikusat authored
The __skb_recv_datagram routine in core/ datagram.c provides a general skb reception factility supposed to be utilized by protocol modules providing datagram sockets. It encompasses both the actual recvmsg code and a surrounding 'sleep until data is available' loop. This is inconvenient if a protocol module has to use additional locking in order to maintain some per-socket state the generic datagram socket code is unaware of (as the af_unix code does). The patch below moves the recvmsg proper code into a new __skb_try_recv_datagram routine which doesn't sleep and renames wait_for_more_packets to __skb_wait_for_more_packets, both routines being exported interfaces. The original __skb_recv_datagram routine is reimplemented on top of these two functions such that its user-visible behaviour remains unchanged. Signed-off-by:
-
Andrew Lunn authored
Device tree properties for a phy device are expected to be in the phy node. The current code for the DP83867 also tries to look in the parent node. The devices binding documentation does not mention this, no current device tree file makes use of this, and it is not behaviour we want. So remove looking in the parent device. Signed-off-by:
-
Bjørn Mork authored
Adding a writable sysfs attribute for the "NDP to end" quirk flag. This makes it easier for end users to test new devices for this firmware bug. We've been lucky so far, but we should not depend on reporters capable of rebuilding the driver. Cc: Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
David S. Miller authored
Or Gerlitz says: ==================== Add HA and LAG support for mlx4 SRIOV VFs This series is built upon the code added in commit ce388fff "Merge branch 'mlx4-next'" which added HA and LAG support to mlx4 RoCE and SRIOV services. We add HA and Link Aggregation support to single ported mlx4 Ethernet VFs. In this case, the PF Ethernet interfaces are bonded, the VFs see single port HW devices (already supported) -- however, now this port is highly available. This means that all VF HW QPs (both VF Ethernet driver and VF RoCE / RAW QPs) are subject to the V2P (Virtual-To-Physical) mapping which is managed by the PF driver, and hence resilient across link failures and such events. When bonding operates in Dynamic link aggregation (802.3ad) mode, traffic from each VF will go over the VF "base port" (the port this VF is assigned to by the admin) as long as this port is up. When the port fails, traffic from all VFs that are defined on this port will move to the other port, and be back to their base-port when it recovers. Moni and Or. ==================== Signed-off-by:
-
Moni Shoua authored
When the mlx4 driver runs in HA mode, and all VFs are single ported ones, we make their single port Highly-Available. This is done by taking advantage of the HA mode properties (following bonding changes with programming the port V2P map, etc) and adding the missing parts which are unique to SRIOV such as mirroring VF steering rules on both ports. Due to limits on the MAC and VLAN table this mode is enabled only when number of total VFs is under 64. Signed-off-by:
Moni Shoua <monis@mellanox.com> Reviewed-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
Under HA mode, it's possible that the VF registered its GID (and expects to get mads through the PV scheme) on a port which is different from the one this mad arrived on, due to HA fail over. Therefore, if the gid is not matched on the port that the packet arrived on, check for a match on the other port if HA mode is active -- and if a match is found on the other port, continue processing the mad using that other port. Signed-off-by:
-
Moni Shoua authored
Due to HW limitations, indexes to MAC and VLAN tables are always taken from the table of the actual port. So, if a resource holds an index to a table, it may refer to different values during the lifetime of the resource, unless the tables are mirrored. Also, even when driver is not in HA mode the policy of allocating an index to these tables is such to make sure, as much as possible, that when the time comes the mirroring will be successful. This means that in multifunction mode the allocation of a free index in a port's table tries to make sure that the same index in the other's port table is also free. Signed-off-by:
-
Moni Shoua authored
Under HA mode, steering rules set by VFs should be mirrored on both ports of the device so packets will be accepted no matter on which port they arrived. Since getting into HA mode is done dynamically when the user bonds mlx4 Ethernet netdevs, we keep hold of the VF DMFS rule mbox with the port value flipped (1->2,2->1) and execute the mirroring when getting into HA mode. Later, when going out of HA mode, we unset the mirrored rules. In that context note that mirrored rules cannot be removed explicitly. Signed-off-by:
-
Moni Shoua authored
Under HA mode, the link down event should be sent to VFs only if both ports are down. Signed-off-by:
-
Or Gerlitz authored
In HA mode, the link state for VFs for which the policy is "auto" (i.e. follow the physical link state) should be ORed from both ports. Signed-off-by:
-
Julia Lawall authored
Remove unneeded variable used to store return value. Generated by: scripts/coccinelle/misc/returnvar.cocci CC: Asias He <asias@redhat.com> Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Bjørn Mork authored
The notifier calls were thrown in as a last-minute fix for an imagined "this device could be part of a bridge" problem. That revealed a certain lack of locking. Not to mention testing... Avoid this splat: RTNL: assertion failed at net/core/dev.c (1639) CPU: 0 PID: 4293 Comm: bash Not tainted 4.4.0-rc3+ #358 Hardware name: LENOVO 2776LEG/2776LEG, BIOS 6EET55WW (3.15 ) 12/19/2011 0000000000000000 ffff8800ad253d60 ffffffff8122f7cf ffff8800ad253d98 ffff8800ad253d88 ffffffff813833ab 0000000000000002 ffff880230f48560 ffff880230a12900 ffff8800ad253da0 ffffffff813833da 0000000000000002 Call Trace: [<ffffffff8122f7cf>] dump_stack+0x4b/0x63 [<ffffffff813833ab>] call_netdevice_notifiers_info+0x3d/0x59 [<ffffffff813833da>] call_netdevice_notifiers+0x13/0x15 [<ffffffffa09be227>] raw_ip_store+0x81/0x193 [qmi_wwan] [<ffffffff8131e149>] dev_attr_store+0x20/0x22 [<ffffffff811d858b>] sysfs_kf_write+0x49/0x50 [<ffffffff811d8027>] kernfs_fop_write+0x10a/0x151 [<ffffffff8117249a>] __vfs_write+0x26/0xa5 [<ffffffff81085ed4>] ? percpu_down_read+0x53/0x7f [<ffffffff81174c9e>] ? __sb_start_write+0x5f/0xb0 [<ffffffff81174c9e>] ? __sb_start_write+0x5f/0xb0 [<ffffffff81172c37>] vfs_write+0xa3/0xe7 [<ffffffff811734ad>] SyS_write+0x50/0x7e [<ffffffff8145c517>] entry_SYSCALL_64_fastpath+0x12/0x6f Fixes: 32f7adf6 ("net: qmi_wwan: support "raw IP" mode") Signed-off-by:
-
- 06 Dec, 2015 8 commits
-
-
Singhai, Anjali authored
This reverts commit 8fe26999. The case where VXLAN is a module and i40e driver is inbuilt will not be handled properly with this change since i40e will have an undefined symbol vxlan_get_rx_port in it. v2: Add a signed-off-by. Signed-off-by:
Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2015-12-05 This series contains updates to fm10k only. Jacob provides the remaining fm10k patches in the series. First change ensures that all the logic regarding the setting of netdev features is consolidated in one place of the driver. Fixed an issue where an assumption was being made on how many queues are available, especially when init_hw_vf() errors out. Fixed up an number of issues with init_hw() where failures were not being handled properly or at all, so update the driver to check returned error codes and respond appropriately. Fixed up typecasting issues found where either the incorrect typecast size was used or explicitly typecast values. Added additional debugging statistics and rename statistic to better reflect its true value. Added support for ITR scaling based on PCIe link speed for fm10k. Fixed up code comment where "hardware" was misspelled. v2: Dropped patches #1 and #10 from original submission, patch #1 was from Nick Krause and due to his past kernel interactions, dropping his patch. Patch #10 had questions and concerns from Tom Herbert which cannot be addressed at this time since the author (Jacob Keller) is currently on sabbatical, so dropping this patch for now until we can properly address Tom's questions and concerns. ==================== Signed-off-by: -
Jacob Keller authored
Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by:
-
Jacob Keller authored
Signed-off-by:
-
Jacob Keller authored
The current default ITR for Tx is overly restrictive. Using a simple netperf TCP_STREAM test, we top out at about 10Gb/s for a single thread when running using 1500 byte frames. By reducing the ITR value to 25usec (up to 40K interrupts a second from 10K), we are able to achieve 36Gb/s for a single thread TCP stream test. Signed-off-by:
-
Jacob Keller authored
Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
-
Jacob Keller authored
The existing adaptive ITR algorithm is overly restrictive. It throttles incorrectly for various traffic rates, and does not produce good performance. The algorithm now allows for more interrupts per second, and does some calculation to help improve for smaller packet loads. In addition, take into account the new itr_scale from the hardware which indicates how much to scale due to PCIe link speed. Reported-by:
Matthew Vick <matthew.vick@intel.com> Reported-by:
Alex Duyck <alexander.duyck@gmail.com> Signed-off-by:
-
Jacob Keller authored
Define a macro for identifying when the itr value is dynamic or adaptive. The concept was taken from i40e. This helps make clear what the check is, and reduces the line length to something more reasonable in a few places. Signed-off-by:
-
