- 10 Oct, 2019 29 commits
-
-
Ricardo Ribalda Delgado authored
A struct v4l2_area containing the width and the height of a rectangular area. Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
Ricardo Ribalda Delgado <ribalda@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Ricardo Ribalda Delgado authored
This type contains the width and the height of a rectangular area. Reviewed-by:
-
Ricardo Ribalda Delgado authored
Function for initializing compound controls with a default value. Suggested-by:
-
Ricardo Ribalda Delgado authored
Currently compound controls do not have a simple way of initializing its values. This results in ofuscated code with type_ops init. This patch introduces a new field on the control with the default value for the compound control that can be set with the brand new v4l2_ctrl_new_std_compound function Suggested-by:
-
Markus Elfring authored
Simplify these function implementations by using a known wrapper function. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Tested-by:
Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
The image size is doubled for NV16 and is calculated as bytesperline * height * 2 to accommodate the split of UV data. When writing the offset to hardware, the width is used instead of bytesperline, fix this. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Steve Longerbeam authored
If a subdevice is unregistered and then registered again without the driver being removed and re-probed (which will happen when the media device is removed and re-probed without also removing/re-probing the subdevice), media_device_register_entity() is called with a non-zero entity->num_pads, and then the subdevice's .registered callback calls media_entity_pads_init(). Thus the subdevice's pad objects are added to the media device pad list twice, causing list corruption. One way to fix this would be to create media_entity_pads_destroy(), and call it in the subdevice's .unregistered callback. But calling media_entity_pads_init() in the .registered callbacks was done for legacy reasons and is no longer necessary, so move the call to media_entity_pads_init() into the subdevice's probe functions. This fixes the duplicate pad obejcts in the media device pad list. Signed-off-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Steve Longerbeam authored
If the CSI is unregistered and then registered again without the driver being removed and re-probed (which will happen when the media device is removed and re-probed without also removing/re-probing the CSI), the result is the kobject error and backtrace "tried to init an initialized object". This is because the video device is left in an initialized state after being unregistered, thus the video device's underlying kobject is also left in an initialized state when the device is registered again. Fix this by moving imx_media_capture_device_init() and _remove() into csi_registered() and csi_unregistered(). This will create a new un-initialized video device when the CSI is re-registered. Do this for all the subdevices that register a capture device. Reported-by:
Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Niklas Söderlund authored
The rectangle used to correct the compose settings when changing the format was created inside a helper function and not where it was used. This is confusing and makes the code harder to read, fix this. This cleanup is made possible due to refactoring elsewhere and there is no functional change. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Niklas Söderlund authored
After recent refactoring the rectangle named crop no longer reflects it usage, to contain the source rectangle. Fix this by renaming it. There is no functional change. Signed-off-by:
-
Wei Yongjun authored
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Fixes: f13d5f36 ("media: vimc: Collapse component structure into a single monolithic driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Acked-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Alan Stern authored
Visual inspection of the usbvision driver shows that it suffers from three races between its open, close, and disconnect handlers. In particular, the driver is careful to update its usbvision->user and usbvision->remove_pending flags while holding the private mutex, but: usbvision_v4l2_close() and usbvision_radio_close() don't hold the mutex while they check the value of usbvision->remove_pending; usbvision_disconnect() doesn't hold the mutex while checking the value of usbvision->user; and also, usbvision_v4l2_open() and usbvision_radio_open() don't check whether the device has been unplugged before allowing the user to open the device files. Each of these can potentially lead to usbvision_release() being called twice and use-after-free errors. This patch fixes the races by reading the flags while the mutex is still held and checking for pending removes before allowing an open to succeed. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by:
-
Alan Stern authored
The syzbot fuzzer found two invalid-access bugs in the usbvision driver. These bugs occur when userspace keeps the device file open after the device has been disconnected and usbvision_disconnect() has set usbvision->dev to NULL: When the device file is closed, usbvision_radio_close() tries to issue a usb_set_interface() call, passing the NULL pointer as its first argument. If userspace performs a querycap ioctl call, vidioc_querycap() calls usb_make_path() with the same NULL pointer. This patch fixes the problems by making the appropriate tests beforehand. Note that vidioc_querycap() is protected by usbvision->v4l2_lock, acquired in a higher layer of the V4L2 subsystem. Reported-and-tested-by: syzbot+7fa38a608b1075dfd634@syzkaller.appspotmail.com Signed-off-by:
-
Colin Ian King authored
Don't populate the array st6422_bridge_init on the stack but instead make it static. Makes the object code smaller by 231 bytes. Before: text data bss dec hex filename 3419 752 64 4235 108b gspca/stv06xx/stv06xx_st6422.o After: text data bss dec hex filename 3124 816 64 4004 fa4 gspca/stv06xx/stv06xx_st6422.o (gcc version 9.2.1, amd64) Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Colin Ian King authored
Don't populate the array mapping on the stack but instead make it static. Makes the object code smaller by 79 bytes. Before: text data bss dec hex filename 27572 2096 0 29668 73e4 drivers/media/pci/cx18/cx18-ioctl.o After: text data bss dec hex filename 27429 2160 0 29589 7395 drivers/media/pci/cx18/cx18-ioctl.o (gcc version 9.2.1, amd64) Signed-off-by:
-
YueHaibing authored
Remove duplicated include. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Jeeeun Evans authored
This patch fixes a warning by coccicheck: drivers/staging/media/imx/imx7-mipi-csis.c:973:1-12: WARNING: Use devm_platform_ioremap_resource for state -> regs Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Signed-off-by:
Jeeeun Evans <jeeeunevans@gmail.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by:
-
Christophe JAILLET authored
A call to 'pci_disable_device()' is missing in the error handling path. In some cases, a call to 'free_irq()' may also be missing. Reorder the error handling path, add some new labels and fix the 2 issues mentionned above. This way, the error handling path in more in line with 'cx8800_finidev()' (i.e. the remove function) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The 2nd parameter of 'find_first_zero_bit()' is a number of bits, not of bytes. So use 'csi2rx->max_lanes' instead of 'sizeof(lanes_used)'. Fixes: 1fc3b37f ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by:
-
Navid Emamdoost authored
In sd_start return value of create_singlethread_workqueue needs null check. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
In sd_start the return value of create_singlethread_workqueue needs null check. Signed-off-by:
-
Daniel Gonzalez Cabanelas authored
Add support for the PCI hybrid card NotOnlyTV LV3H. This card consists of: - A/V Controller: Conexant CX-23883 - Tuner: Xceive XC3028L - DVB-T Decoder: Zarlink ZL10353 This patch adds support for DVB-T, Analog TV, FM radio, composite and S-video inputs. The IR input isn't supported. Since the PCI subsystem ID (14f1:8852) is the same as the Geniatech X8000-MT, but they are different boards, the card is only supported via insmod option: options cx88xx card=91 For the record this is the eeprom dump, useful if someone wanted to implement the card auto detection: 07 ff ff ff f1 14 52 88 04 04 32 55 f8 00 a2 02 a1 00 40 63 06 11 44 30 03 df 40 80 00 20 00 73 3c 10 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff a0 00 Signed-off-by:
Daniel Gonzalez Cabanelas <dgcbueu@gmail.com> Signed-off-by:
-
Amol Grover authored
CHECK: Alignment should match open parenthesis Signed-off-by:
Amol Grover <frextrite@gmail.com> Signed-off-by:
-
Geert Uytterhoeven authored
div_u64() does a 64-by-32 division, while the divisor max2175.xtal_freq is unsigned long, thus 64-bit on 64-bit platforms. Hence the proper function to call is div64_ul(). Note that this change does not have any functional impact, as the crystal frequency must be much lower than the 32-bit limit anyway. On 32-bit platforms, the generated code is the same. But at least on arm64, this saves an AND-instruction to truncate xtal_freq to 32-bit. Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Yizhuo authored
media: media/pci/ivtv: Variable vbi.type could be uninitialized if macro v4l2_subdev_call set __result an error code Inside function compress_sliced_buf(), variable vbi.type is uninitialized if macro v4l2_subdev_call set __result an error code. However, vbi.type is used in the if statement without any check, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
Gon Solo authored
This includes a hack for the device as it returns only 0xff after a new firmware is loaded. To quote Mauro: "When the [...] firmware that came with the device is replaced by a new one, any I2C data received from the tuner will be replaced by 0xff. Probably, the vendor firmware has some patch specifically designed for this device. So, we can't replace by the generic firmware. The right solution would be to extract the [...] firmware from the original driver and ask the driver to load the specifically designed firmware, but, while we don't have that, the next best solution is to just keep the original firmware at the device." Signed-off-by:
Gon Solo <gonsolo@gmail.com> Signed-off-by:
-
Gon Solo authored
While at it, convert to kernel-doc format and use bits instead of bools. Signed-off-by:
-
Mauro Carvalho Chehab authored
A very old patch sent to the media ML used to contain the I2C speed formula: https://lore.kernel.org/linux-media/1312539895.2763.33.camel@Jason-Linux/ When the ite9135 code was merged with af9035, the formula was lost. As we might need to slow down the speed for some devices, add the formula again. No functional changes. Signed-off-by:
-
Mauro Carvalho Chehab authored
Using bool on struct is not recommended, as it wastes lots of space. So, instead, let's use bits. While here, convert the comments to kernel-doc format. Signed-off-by:
-
- 08 Oct, 2019 1 commit
-
-
Mauro Carvalho Chehab authored
As reported by jenkins@linuxtv.org, the build with i386 fails with: ld: drivers/media/platform/qcom/venus/helpers.o: in function `venus_helper_load_scale_clocks': (.text+0x1d77): undefined reference to `__udivdi3' ld: (.text+0x1dce): undefined reference to `__udivdi3' make: *** [Makefile:1094: vmlinux] Error 1 That's because it divides an u32 bit integer by a u64 one. Reviewed-by:
Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by:
-
- 07 Oct, 2019 10 commits
-
-
Hans Verkuil authored
When the new CEC_OP_UI_CMD defines were added I forgot to update this header to use these new defines. This is now fixed. Signed-off-by:
-
Hans Verkuil authored
The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the follower will reply with a STATUS message. Either once or whenever the status changes (status_req == ON). If status_req == OFF, then it will stop sending continuous status updates, but the follower will *not* send a STATUS message in that case. This means that if status_req == OFF, then msg->reply should be 0 as well since no reply is expected in that case. Signed-off-by:
-
Yang Yingliang authored
If usb_set_interface() failed, iface->cur_altsetting will not be assigned and it will be used in flexcop_usb_transfer_init() It may lead a NULL pointer dereference. Check usb_set_interface() return value in flexcop_usb_init() and return failed to avoid using this NULL pointer. Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Akihiro Tsukada authored
Support Friio devices to read from tuner via demod tc90522, by enabling the config option. Signed-off-by:
Akihiro Tsukada <tskd08@gmail.com> Signed-off-by:
-
Akihiro Tsukada authored
This demod implements an i2c adapter for attached tuner and relays i2c messages from users (dvb adapters / bridge chips). Some of them, such as Friio dvb card using gl861, require each pair of i2c messages for one read to be issued as two separate transactions. This patch adds a configuration option to enable this split. Signed-off-by:
-
Akihiro Tsukada authored
The header contained just internal definitions and they are not used anymore. Signed-off-by:
-
Akihiro Tsukada authored
For Friio dvb cards, a distinct I2C algo was provided to support some "long" I2C messages used in relaying tuner I2C via demod. Since the other (generic) i2c algo in this module has been patched to support those messages in a more generic way, this patch replaces and integrates the device-specific i2c algo with the generic one and simplifies the code. Signed-off-by:
-
Antti Palosaari authored
Device I2C adapter is capable of writing and reading large messages. For I2C writes there is 2 methods: simple for max 2 byte messages and usb_control_msg() with payload data for larger I2C messages. Add I2C adapter logic which selects suitable method according to message size. Add also support for plain I2C read. Cc: Akihiro TSUKADA <tskd08@gmail.com> Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Andrei Koshkosh authored
Re-use usb_mutex from dvb_usb_device for this. Tested-by:
Jan Pieter van Woerkom <jp@jpvw.nl> Signed-off-by:
Andrei Koshkosh <andreykosh000@mail.ru> Signed-off-by:
-
Colin Ian King authored
The variable rc is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:
-
