Pull networking fixes from David Miller:

 1) Lots more phydev and probe error path leaks in various drivers by
    Johan Hovold.

 2) Fix race in packet_set_ring(), from Philip Pettersson.

 3) Use after free in dccp_invalid_packet(), from Eric Dumazet.

 4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric
    Dumazet.

 5) When tunneling between ipv4 and ipv6 we can be left with the wrong
    skb->protocol value as we enter the IPSEC engine and this causes all
    kinds of problems. Set it before the output path does any
    dst_output() calls, from Eli Cooper.

 6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from
    Florian Fainelli.

 7) Various netfilter nat bug fixes from FLorian Westphal.

 8) Fix memory leak in ipvlan_link_new(), from Gao Feng.

 9) Locking fixes, particularly wrt. socket lookups, in l2tp from
    Guillaume Nault.

10) Avoid invoking rhash teardowns in atomic context by moving netlink
    cb->done() dump completion from a worker thread. Fix from Herbert
    Xu.

11) Buffer refcount problems in tun and macvtap on errors, from Jason
    Wang.

12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user
    selects BBR. Fix from Julian Wollrath.

13) Fix deadlock in transmit path on altera TSE driver, from Lino
    Sanfilippo.

14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita
    Yushchenko.

15) tc_tunnel_key needs to be properly exported to userspace via uapi,
    fix from Roi Dayan.

16) rds_tcp_init_net() doesn't unregister notifier in error path, fix
    from Sowmini Varadhan.

17) Stale packet header pointer access after pskb_expand_head() in
    genenve driver, fix from Sabrina Dubroca.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
  net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
  geneve: avoid use-after-free of skb->data
  tipc: check minimum bearer MTU
  net: renesas: ravb: unintialized return value
  sh_eth: remove unchecked interrupts for RZ/A1
  net: bcmgenet: Utilize correct struct device for all DMA operations
  NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
  cdc_ether: Fix handling connection notification
  ip6_offload: check segs for NULL in ipv6_gso_segment.
  RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
  Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
  ipv6: Set skb->protocol properly for local output
  ipv4: Set skb->protocol properly for local output
  packet: fix race condition in packet_set_ring
  net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
  net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
  net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
  net: ethernet: stmmac: platform: fix outdated function header
  net: ethernet: stmmac: dwmac-meson8b: fix probe error path
  net: ethernet: stmmac: dwmac-generic: fix probe error path
  ...

CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...

Note that before commit 82981930 ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.

This needs to be backported to all known linux kernels.

Again, many thanks to syzkaller team for discovering this gem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

geneve{,6}_build_skb can end up doing a pskb_expand_head(), which
makes the ip_hdr(skb) reference we stashed earlier stale. Since it's
only needed as an argument to ip_tunnel_ecn_encap(), move this
directly in the function call.

Fixes: 08399efc ("geneve: ensure ECN info is handled properly in all tx/rx paths")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.

As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.

Fixes: b97bf3fd ("[TIPC] Initial merge")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.9-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-12-02

this is a pull request for net/master.

There are two patches by Stephane Grosjean, who adds support for the new
PCAN-USB X6 USB interface to the pcan_usb driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

We want to set the other "err" variable here so that we can return it
later.  My version of GCC misses this issue but I caught it with a
static checker.

Fixes: 9f70eb33 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

When streaming a lot of data and the RZ/A1 can't keep up, some status bits
will get set that are not being checked or cleared which cause the
following messages and the Ethernet driver to stop working. This
patch fixes that issue.

irq 21: nobody cared (try booting with the "irqpoll" option)
handlers:
[<c036b71c>] sh_eth_interrupt
Disabling IRQ #21

Fixes: db893473 ("sh_eth: Add support for r7s72100")
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the
same struct device during unmap that was used for the map operation,
which makes DMA-API debugging warn about it. Fix this by always using
&priv->pdev->dev throughout the driver, using an identical device
reference for all map/unmap calls.

Fixes: 1c1008c7 ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Ozgur Karatas reported that the very first entry in the CREDITS file had
the wrong tag for name (M: instead of N: - it happened when moving the
entry from the MAINTAINERS file, where 'M:' stands for "Maintainer").

And when I went looking, I found a couple of other cases of wrong
tagging too.
Reported-by: Ozgur Karatas <mueddib@yandex.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch adds support for PID 0x1040 of Telit LE922A.

The qmi adapter requires to have DTR set for proper working,
so QMI_WWAN_QUIRK_DTR has been enabled.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit bfe9b9d2 ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduced a work-around in usbnet_cdc_status() for devices that exported
cdc carrier on twice on connect. Before the commit, this behavior caused
the link state to be incorrect. It was assumed that all CDC Ethernet
devices would either export this behavior, or send one off and then one on
notification (which seems to be the default behavior).

Unfortunately, it turns out multiple devices sends a connection
notification multiple times per second (via an interrupt), even when
connection state does not change. This has been observed with several
different USB LAN dongles (at least), for example 13b1:0041 (Linksys).
After bfe9b9d2, the link state has been set as down and then up for
each notification. This has caused a flood of Netlink NEWLINK messages and
syslog to be flooded with messages similar to:

cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped

This commit fixes the behavior by reverting usbnet_cdc_status() to how it
was before bfe9b9d2. The work-around has been moved to a separate
status-function which is only called when a known, affect device is
detected.

v1->v2:

* Do not open-code netif_carrier_ok() (thanks Henning Schild).
* Call netif_carrier_off() instead of usb_link_change(). This prevents
calling schedule_work() twice without giving the work queue a chance to be
processed (thanks Bjørn Mork).

Fixes: bfe9b9d2 ("cdc_ether: Improve ZTE MF823/831/910 handling")
Reported-by: Henning Schild <henning.schild@siemens.com>
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

segs needs to be checked for being NULL in ipv6_gso_segment() before calling
skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference:

[   97.811262] BUG: unable to handle kernel NULL pointer dereference at 00000000000000cc
[   97.819112] IP: [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   97.825214] PGD 0 [   97.827047]
[   97.828540] Oops: 0000 [#1] SMP
[   97.831678] Modules linked in: vhost_net vhost macvtap macvlan nfsv3 rpcsec_gss_krb5
nfsv4 dns_resolver nfs fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4
iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack
ipt_REJECT nf_reject_ipv4 tun ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter
bridge stp llc snd_hda_codec_realtek snd_hda_codec_hdmi snd_hda_codec_generic snd_hda_intel
snd_hda_codec edac_mce_amd snd_hda_core edac_core snd_hwdep kvm_amd snd_seq kvm snd_seq_device
snd_pcm irqbypass snd_timer ppdev parport_serial snd parport_pc k10temp pcspkr soundcore parport
sp5100_tco shpchp sg wmi i2c_piix4 acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc
ip_tables xfs libcrc32c sr_mod cdrom sd_mod ata_generic pata_acpi amdkfd amd_iommu_v2 radeon
broadcom bcm_phy_lib i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops
ttm ahci serio_raw tg3 firewire_ohci libahci pata_atiixp drm ptp libata firewire_core pps_core
i2c_core crc_itu_t fjes dm_mirror dm_region_hash dm_log dm_mod
[   97.927721] CPU: 1 PID: 3504 Comm: vhost-3495 Not tainted 4.9.0-7.el7.test.x86_64 #1
[   97.935457] Hardware name: AMD Snook/Snook, BIOS ESK0726A 07/26/2010
[   97.941806] task: ffff880129a1c080 task.stack: ffffc90001bcc000
[   97.947720] RIP: 0010:[<ffffffff816e52f9>]  [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   97.956251] RSP: 0018:ffff88012fc43a10  EFLAGS: 00010207
[   97.961557] RAX: 0000000000000000 RBX: ffff8801292c8700 RCX: 0000000000000594
[   97.968687] RDX: 0000000000000593 RSI: ffff880129a846c0 RDI: 0000000000240000
[   97.975814] RBP: ffff88012fc43a68 R08: ffff880129a8404e R09: 0000000000000000
[   97.982942] R10: 0000000000000000 R11: ffff880129a84076 R12: 00000020002949b3
[   97.990070] R13: ffff88012a580000 R14: 0000000000000000 R15: ffff88012a580000
[   97.997198] FS:  0000000000000000(0000) GS:ffff88012fc40000(0000) knlGS:0000000000000000
[   98.005280] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   98.011021] CR2: 00000000000000cc CR3: 0000000126c5d000 CR4: 00000000000006e0
[   98.018149] Stack:
[   98.020157]  00000000ffffffff ffff88012fc43ac8 ffffffffa017ad0a 000000000000000e
[   98.027584]  0000001300000000 0000000077d59998 ffff8801292c8700 00000020002949b3
[   98.035010]  ffff88012a580000 0000000000000000 ffff88012a580000 ffff88012fc43a98
[   98.042437] Call Trace:
[   98.044879]  <IRQ> [   98.046803]  [<ffffffffa017ad0a>] ? tg3_start_xmit+0x84a/0xd60 [tg3]
[   98.053156]  [<ffffffff815eeee0>] skb_mac_gso_segment+0xb0/0x130
[   98.059158]  [<ffffffff815eefd3>] __skb_gso_segment+0x73/0x110
[   98.064985]  [<ffffffff815ef40d>] validate_xmit_skb+0x12d/0x2b0
[   98.070899]  [<ffffffff815ef5d2>] validate_xmit_skb_list+0x42/0x70
[   98.077073]  [<ffffffff81618560>] sch_direct_xmit+0xd0/0x1b0
[   98.082726]  [<ffffffff815efd86>] __dev_queue_xmit+0x486/0x690
[   98.088554]  [<ffffffff8135c135>] ? cpumask_next_and+0x35/0x50
[   98.094380]  [<ffffffff815effa0>] dev_queue_xmit+0x10/0x20
[   98.099863]  [<ffffffffa09ce057>] br_dev_queue_push_xmit+0xa7/0x170 [bridge]
[   98.106907]  [<ffffffffa09ce161>] br_forward_finish+0x41/0xc0 [bridge]
[   98.113430]  [<ffffffff81627cf2>] ? nf_iterate+0x52/0x60
[   98.118735]  [<ffffffff81627d6b>] ? nf_hook_slow+0x6b/0xc0
[   98.124216]  [<ffffffffa09ce32c>] __br_forward+0x14c/0x1e0 [bridge]
[   98.130480]  [<ffffffffa09ce120>] ? br_dev_queue_push_xmit+0x170/0x170 [bridge]
[   98.137785]  [<ffffffffa09ce4bd>] br_forward+0x9d/0xb0 [bridge]
[   98.143701]  [<ffffffffa09cfbb7>] br_handle_frame_finish+0x267/0x560 [bridge]
[   98.150834]  [<ffffffffa09d0064>] br_handle_frame+0x174/0x2f0 [bridge]
[   98.157355]  [<ffffffff8102fb89>] ? sched_clock+0x9/0x10
[   98.162662]  [<ffffffff810b63b2>] ? sched_clock_cpu+0x72/0xa0
[   98.168403]  [<ffffffff815eccf5>] __netif_receive_skb_core+0x1e5/0xa20
[   98.174926]  [<ffffffff813659f9>] ? timerqueue_add+0x59/0xb0
[   98.180580]  [<ffffffff815ed548>] __netif_receive_skb+0x18/0x60
[   98.186494]  [<ffffffff815ee625>] process_backlog+0x95/0x140
[   98.192145]  [<ffffffff815edccd>] net_rx_action+0x16d/0x380
[   98.197713]  [<ffffffff8170cff1>] __do_softirq+0xd1/0x283
[   98.203106]  [<ffffffff8170b2bc>] do_softirq_own_stack+0x1c/0x30
[   98.209107]  <EOI> [   98.211029]  [<ffffffff8108a5c0>] do_softirq+0x50/0x60
[   98.216166]  [<ffffffff815ec853>] netif_rx_ni+0x33/0x80
[   98.221386]  [<ffffffffa09eeff7>] tun_get_user+0x487/0x7f0 [tun]
[   98.227388]  [<ffffffffa09ef3ab>] tun_sendmsg+0x4b/0x60 [tun]
[   98.233129]  [<ffffffffa0b68932>] handle_tx+0x282/0x540 [vhost_net]
[   98.239392]  [<ffffffffa0b68c25>] handle_tx_kick+0x15/0x20 [vhost_net]
[   98.245916]  [<ffffffffa0abacfe>] vhost_worker+0x9e/0xf0 [vhost]
[   98.251919]  [<ffffffffa0abac60>] ? vhost_umem_alloc+0x40/0x40 [vhost]
[   98.258440]  [<ffffffff81003a47>] ? do_syscall_64+0x67/0x180
[   98.264094]  [<ffffffff810a44d9>] kthread+0xd9/0xf0
[   98.268965]  [<ffffffff810a4400>] ? kthread_park+0x60/0x60
[   98.274444]  [<ffffffff8170a4d5>] ret_from_fork+0x25/0x30
[   98.279836] Code: 8b 93 d8 00 00 00 48 2b 93 d0 00 00 00 4c 89 e6 48 89 df 66 89 93 c2 00 00 00 ff 10 48 3d 00 f0 ff ff 49 89 c2 0f 87 52 01 00 00 <41> 8b 92 cc 00 00 00 48 8b 80 d0 00 00 00 44 0f b7 74 10 06 66
[   98.299425] RIP  [<ffffffff816e52f9>] ipv6_gso_segment+0x119/0x2f0
[   98.305612]  RSP <ffff88012fc43a10>
[   98.309094] CR2: 00000000000000cc
[   98.312406] ---[ end trace 726a2c7a2d2d78d0 ]---
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If some error is encountered in rds_tcp_init_net, make sure to
unregister_netdevice_notifier(), else we could trigger a panic
later on, when the modprobe from a netns fails.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit ae148b08
("ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()").

skb->protocol is now set in __ip_local_out() and __ip6_local_out() before
dst_output() is called. It is no longer necessary to do it for each tunnel.

Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When xfrm is applied to TSO/GSO packets, it follows this path:

    xfrm_output() -> xfrm_output_gso() -> skb_gso_segment()

where skb_gso_segment() relies on skb->protocol to function properly.

This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called,
fixing a bug where GSO packets sent through an ipip6 tunnel are dropped
when xfrm is involved.

Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When xfrm is applied to TSO/GSO packets, it follows this path:

    xfrm_output() -> xfrm_output_gso() -> skb_gso_segment()

where skb_gso_segment() relies on skb->protocol to function properly.

This patch sets skb->protocol to ETH_P_IP before dst_output() is called,
fixing a bug where GSO packets sent through a sit tunnel are dropped
when xfrm is involved.

Cc: stable@vger.kernel.org
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When packet_set_ring creates a ring buffer it will initialize a
struct timer_list if the packet version is TPACKET_V3. This value
can then be raced by a different thread calling setsockopt to
set the version to TPACKET_V1 before packet_set_ring has finished.

This leads to a use-after-free on a function pointer in the
struct timer_list when the socket is closed as the previously
initialized timer will not be deleted.

The bug is fixed by taking lock_sock(sk) in packet_setsockopt when
changing the packet version while also taking the lock at the start
of packet_set_ring.

Fixes: f6fb8f10 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull KVM fixes from Radim Krčmář:
 "All architectures avoid memory corruption in an error path. ARM
  prevents bogus acknowledgement of interrupts"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: use after free in kvm_ioctl_create_device()
  KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs

Pull i2c fix from Wolfram Sang:
 "Here is the revert for the regression of the i2c-octeon driver I
  mentioned last time. I wished for a bit more feedback, but all people
  working actively on it are in need of this patch, so here it goes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  Revert "i2c: octeon: thunderx: Limit register access retries"

The driver already uses its private lock for synchronization between xmit
and xmit completion handler making the additional use of the xmit_lock
unnecessary.
Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be
called with the xmit_lock held and then taking the private lock while xmit
completion handler does the reverse, first take the private lock, then the
xmit_lock.
Fix these issues by not taking the xmit_lock in the tx completion handler.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

An explicit dma sync for device directly after mapping as well as an
explicit dma sync for cpu directly before unmapping is unnecessary and
costly on the hotpath. So remove these calls.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

With binutils-2.26 and before, a weak missing symbol was kept during the
final link, and a missing CRC for an export would lead to that CRC being
treated as zero implicitly.  With binutils-2.27, the crc symbol gets
dropped, and any module trying to use it will fail to load.

This sets the weak CRC symbol to zero explicitly, making it defined in
vmlinux, which in turn lets us load the modules referring to that CRC.

The comment above the __CRC_SYMBOL macro suggests that this was always
the intention, although it also seems that all symbols defined in C have
a correct CRC these days, and only the exports that are now done in
assembly need this.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Adam Borowski <kilobyte@angband.pl>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Johan Hovold says:

====================
net: stmmac: fix probe error handling and phydev leaks

This series fixes a number of issues with the stmmac-driver probe error
handling, which for example left clocks enabled after probe failures.

The final patch fixes a failure to deregister and free any fixed-link
PHYs that were registered during probe on probe errors and on driver
unbind. It also fixes a related of-node leak on late probe errors.

This series depends on the of_phy_deregister_fixed_link() helper that
was just merged to net.

As mentioned earlier, one staging driver also suffers from a similar
leak and can be fixed up once the above mentioned helper hits mainline.

Note that these patches have only been compile tested.
====================
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by adding a new glue helper
function.

Drop the of-node reference taken in the same path also on late probe
errors (and not just on driver unbind) by moving the put from
stmmac_dvr_remove() to the new helper.

Fixes: 27732381 ("stmmac: add fixed-link device-tree support")
Fixes: 4613b279 ("ethernet: stmicro: stmmac: add missing of_node_put
after calling of_parse_phandle")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the OF-helper function header to reflect that the function no longer
has a platform-data parameter.

Fixes: b0003ead ("stmmac: make stmmac_probe_config_dt return the
platform data struct")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to disable clocks before returning on late probe errors.

Fixes: 566e8251 ("net: stmmac: add a glue driver for the Amlogic
Meson 8b / GXBB DWMAC")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to call any exit() callback to undo the effect of init()
before returning on late probe errors.

Fixes: cf3f047b ("stmmac: move hw init in the probe (v2)")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to disable runtime PM, power down the PHY, and disable clocks
before returning on late probe errors.

Fixes: 27ffefd2 ("stmmac: dwmac-rk: create a new probe function")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to disable clocks before returning on late probe errors.

Fixes: 8387ee21 ("stmmac: dwmac-sti: turn setup callback into a
probe function")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure to call stmmac_dvr_remove() before returning on late probe
errors so that memory is freed, clocks are disabled, and the netdev is
deregistered before its resources go away.

Fixes: 3c201b5a ("net: stmmac: socfpga: Remove re-registration of
reset controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the correct attribute constant names IFLA_GSO_MAX_{SEGS,SIZE}
instead of IFLA_MAX_GSO_{SEGS,SIZE} for the comments int nlmsg_size().

Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull PCI fixes from Bjorn Helgaas:
 "PCI fixes:

   - Fix Read Completion Boundary setting, which fixes a boot failure on
     IBM x3850 with Mellanox MT27500 ConnectX-3

   - Update some MAINTAINERS entries and email addresses"

* tag 'pci-v4.9-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: Set Read Completion Boundary to 128 iff Root Port supports it (_HPX)
  PCI: Export pcie_find_root_port
  PCI: designware-plat: Update author email
  PCI: designware: Change maintainer to Joao Pinto
  MAINTAINERS: Add devicetree binding to PCI i.MX6 entry
  MAINTAINERS: Update Richard Zhu's email address

In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.

In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.

Fixes: b83e3010 ("ixgbe/ixgbevf: Add support for GSO partial")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.

In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.

Fixes: e10715d3 ("igb/igbvf: Add support for GSO partial")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The change fixes AX88772_suspend() USB vendor commands failure issues.
Signed-off-by: Allan Chou <allan@asix.com.tw>
Tested-by: Allan Chou <allan@asix.com.tw>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull overlayfs fix from Miklos Szeredi:
 "This fixes a regression introduced in 4.8"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: fix d_real() for stacked fs

Pull input fixes from Dmitry Torokhov: "We are disabling automatic
  probing of BYD touchpads as it results in too many false positives,
  and the hardware is not terribly popular and having the protocol
  support does not result in significantly improved user experience.

  We also change keycode for KEY_DATA to avoid clashing with
  KEY_FASTREVERSE. Luckily this newish code is used by CEC framework
  that is still in staging, so it is extremely unlikely that someone has
  already started using this keycode"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: change KEY_DATA from 0x275 to 0x277
  Input: psmouse - disable automatic probing of BYD touchpads

Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created.  Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Steffen Klassert says:

====================
pull request (net): ipsec 2016-12-01

1) Change the error value when someone tries to run 32bit
   userspace on a 64bit host from -ENOTSUPP to the userspace
   exported -EOPNOTSUPP. Fix from Yi Zhao.

2) On inbound, ESN sequence numbers are already in network
   byte order. So don't try to convert it again, this fixes
   integrity verification for ESN. Fixes from Tobias Brunner.

Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

This is a large batch of Netfilter fixes for net, they are:

1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist
   structure that allows to have several objects with the same key.
   Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is
   expecting a return value similar to memcmp(). Change location of
   the nat_bysource field in the nf_conn structure to avoid zeroing
   this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us
   to crashes. From Florian Westphal.

2) Don't allow malformed fragments go through in IPv6, drop them,
   otherwise we hit GPF, patch from Florian Westphal.

3) Fix crash if attributes are missing in nft_range, from Liping Zhang.

4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia.

5) Two patches from David Ahern to fix netfilter interaction with vrf.
   From David Ahern.

6) Fix element timeout calculation in nf_tables, we take milliseconds
   from userspace, but we use jiffies from kernelspace. Patch from
   Anders K.  Pedersen.

7) Missing validation length netlink attribute for nft_hash, from
   Laura Garcia.

8) Fix nf_conntrack_helper documentation, we don't default to off
   anymore for a bit of time so let's get this in sync with the code.

I know is late but I think these are important, specifically the NAT
bits, as they are mostly addressing fallout from recent changes. I also
read there are chances to have -rc8, if that is the case, that would
also give us a bit more time to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>