- 25 Jan, 2008 40 commits
-
-
Luca Olivetti authored
Marcos Melero (marcosmelero at gmail.com) reported he could make his dvb-t usb stick work with the af9005 driver by changing the device ids (10b9:6000). The stick is branded "Ansonic" (one of the brands of a spanish chain of supermarkets) with no other identification of the model. Since neither Marcos nor me know the OEM for the stick, in the attached patch I used Ansonic for the ids/description. Signed-off-by:
Luca Olivetti <luca@ventoso.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@infradead.org>
-
Michael Krufky authored
Call analog_ops.standby during tda18271_set_params, to put the tda8295 in tri-state when tuning digital channels. Otherwise the tda8295 will interfere with the signal coming from the tda18271 into the digital demodulator. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
state is already NULL. Reviewed-by:
Trent Piepho <xyzzy@speakeasy.org> Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Steven Toth authored
Correctly set the atatch structures, enable IR, configure the xc5000 tuner includes. Signed-off-by:
Steven Toth <stoth@hauppauge.com> Signed-off-by:
-
Steven Toth authored
xc5000: Small amount of cleanup and commenting, just for clarification. Signed-off-by:
-
Steven Toth authored
From Zhang: This patch fixes support for the HVR1500Q which was broken when the xc5000 analog patch was added. Patch committed as-is, cleanups to follows .... Steve Signed-off-by:
Chaogui Zhang <czhang1974@gmail.com> Signed-off-by:
-
Steven Toth authored
From Zhang: This patch continues the support for the Pinnacle HD 800i. Patch committed as-is, cleanups to follow ... Steve Signed-off-by:
-
Steven Toth authored
From Zhang: This an updated patch that adds analog support for the xc5000 tuner driver. it was tested on a Pinnacle PCTV HD 800i card (patches to follow). Patch commited as-is, cleanup to follow ... Steve. Signed-off-by:
-
Steven Toth authored
Parallel support was not working with the s5h1409 and the Pinnacle HD800i. This patch fixes the demodulator driver and ensures that all existing s5h1409 based products configure the demodulator correctly. Signed-off-by:
-
Mauro Carvalho Chehab authored
The backports weren't tested, but compile fine. Signed-off-by: -
Tobias Lorenz authored
this patch adds a new driver for the Silicon Labs Si470x FM Radio Receiver. It should also work for the identical ADS/Tech FM Radio Receiver (formerly Instant FM Music) as soon as I find out the USB Vendor and Product ID. The driver is inspired by several other USB and radio drivers, but mainly from the D-Link DSB-R100 USB radio (dsbr100.c). The USB stick currently has an Si4701 FM RDS radio receiver. But the other Si470x devices are pin and register compatible, so that in the future the driver can easily be patched to support these too. Therefore I named the driver radio-si470x and the configuration option usb-si470x. The driver itself just provides the control function over the radio. For getting audio back, the device support the USB audio class, which is implemented in the already existing driver. I tested the driver in the last days, until it now satisfies all my functionality and robustness requirements. The application I used for testing was kradio. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Zoltan Devai authored
Signed-off-by:
Zoltan Devai <zdevai@gmail.com> Signed-off-by:
-
Julia Lawall authored
The file drivers/media/video/videodev.c defines both video_device_alloc and video_device_release. These are essentially just kzmalloc and kfree, respectively, but it seems better to use video_device_release, as done in the other media files, rather than kfree, in case the implementation some day changes. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by:
Julia Lawall <julia@diku.dk> Signed-off-by:
-
Julia Lawall authored
Video_device_alloc returns the result of a kzalloc. In this case, the value is stored in a local variable which is not copied elsewhere before the point of the error return (video_register_device does not save its first argument anywhere if it returns a negative value). Thus, a video_device_release it needed before the error return. The problem was found using the following semantic match. (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T,T1,T2; identifier E; statement S; expression x1,x2,x3; int ret; @@ T E; ... * E = video_device_alloc(...); if (E == NULL) S ... when != video_device_release(...,(T1)E,...) when != if (E != NULL) { ... video_device_release(...,(T1)E,...); ...} when != x1 = (T1)E when != E = x3; when any if (...) { ... when != video_device_release(...,(T2)E,...) when != if (E != NULL) { ... video_device_release(...,(T2)E,...); ...} when != x2 = (T2)E ( * return; | * return ret; ) } // </smpl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> CC: Oliver Endriss <o.endriss@gmx.de> CC: Michael Hunold <michael@mihu.de> Signed-off-by:
-
Michael Krufky authored
This module option variable is only handled within the file tda18271-fe.c - Declare this variable as static. Signed-off-by:
-
Michael Krufky authored
VIDEO_PVRUSB2 must select: VIDEO_SAA711X, VIDEO_CX25840, VIDEO_MSP3400, and VIDEO_WM8775 Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Michael Krufky authored
If module option "cal" is set to 1, the ~22 sec rf tracking filter calibration sequence will be invoked on startup. Otherwise, the calibration will take place during the first tune. Signed-off-by:
-
Michael Krufky authored
Test RF_CAL_OK to see if we need to perform the RF tracking filter calibration after returning from standby. Signed-off-by:
-
Michael Krufky authored
Add function, tda18271_set_standby_mode. During sleep, enter standby mode with slave tuner output enabled, loop through on and xtal oscillator on. Signed-off-by:
-
Michael Krufky authored
Signed-off-by:
-
Thierry MERLE authored
All YUV to RGB conversions in usbvision were reverted (conversion to BGR but saying RGB to the application) Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Acked-by:
Dwaine Garden <DwaineGarden@rogers.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Changeset 7e65d6e8f6df removed a very bad hack on mmap(). However, the fixes weren't considering usermap and overlay memory models. This were breaking direct reading from /dev/video?, used mostly by mpeg aware drivers. Thanks to Steven Toth <stoth@linuxtv.org> for reporting the issue and bissecting it. Signed-off-by: -
Mauro Carvalho Chehab authored
Due to date overflow, vivi were not working fine anymore. Signed-off-by: -
Mauro Carvalho Chehab authored
This cleanup moves the board-specific configurations to em28xx-cards.c. Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Jeroen Janssen <Jeroen.Janssen@vub.ac.be> Signed-off-by: -
Jaime Velasco Juan authored
This driver supports cameras with USB ID 174f:a311 or 05e1:0501, and the ov965x sensors. These devices are found in some Asus laptops and probably somewhere else. It is based on the stk11xx driver written by Nicolas Vivien Signed-off-by:
Jaime Velasco Juan <jsagarribay@gmail.com> Signed-off-by:
-
Hermann Pitton authored
Thanks go to Mark Schultz for the initial contribution and to Dean Hilkewich for testing it again. Signed-off-by:
Hermann Pitton <hermann-pitton@arcor.de> Signed-off-by:
-
Hermann Pitton authored
saa7134: remove the Avermedia Super 007 from eeprom detection The card made it into the Philips' Tigers eeprom detection and falls through. Since it has attracted already others to follow, which are wrongly identified as TIGER_S then, move it to the usual analog initialization. Signed-off-by:
-
Steven Toth authored
Added missing do { } while (0) Signed-off-by: -
Brett T. Warden authored
V4L/DVB (7013): bw-qcam: add module parameter 'force_init' to skip polite auto-detection prior to direct initialization Setting force_init=1 bypasses the friendly auto-detection by polling the status register, and instead attempts to initialize the qcam directly. Not friendly to other parallel devices, but much more reliable than the auto-detection. Signed-off-by:
Brett T. Warden <brett.warden@gmail.com> Signed-off-by:
-
Steven Toth authored
Signed-off-by:
-
Steven Toth authored
cx23885: Small cleanup Signed-off-by:
-
Steven Toth authored
cx23885: Video and VBI related files. Signed-off-by:
-
Steven Toth authored
If not it impacts on analog tuner quality. Signed-off-by:
-
Steven Toth authored
This enabled basic preview NTSC and PAL support for the HVR1800. Signed-off-by:
-
Steven Toth authored
The cx23885/6/8 all have different clock rates, this patch allows the core to compensate, and developers to allow vendor specific overrides. This patches will be used by future analog video and encoder patches. Signed-off-by:
-
Steven Toth authored
We need to clear space large enough for the video and encoder fifos. Signed-off-by:
-
Steven Toth authored
Failure to do this means that a full system reboot is required if the part hangs. Signed-off-by:
-
Steven Toth authored
Each version of the cx23885/7/8 silicon has different build revs. We'll use this internal revision to work around bugs and known issues in the video and encoder related patches. Signed-off-by:
-
