- 19 Apr, 2020 40 commits
-
-
Geert Uytterhoeven authored
According to https://www.analog.com/, the company name is spelled "Analog Devices". Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Alexandru Ardelean authored
The iio_triggered_buffer_{predisable,postenable} functions attach/detach the poll functions. For the predisable hook, the disable code should occur before detaching the poll func, and for the postenable hook, the poll func should be attached before the enable code. This change reworks the predisable/postenable hooks so that the pollfunc is attached/detached in the correct position. It also balances the calls a bit, by grouping the preenable and the iio_triggered_buffer_postenable() into a single isl29125_buffer_postenable() function. Signed-off-by: -
Aishwarya Ramakrishnan authored
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. It reduces boilerplate and suggested by coccinelle. Signed-off-by:
Aishwarya Ramakrishnan <aishwaryarj100@gmail.com> Signed-off-by:
-
Aishwarya Ramakrishnan authored
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. It reduces boilerplate and suggested by coccinelle. Signed-off-by:
-
Aishwarya Ramakrishnan authored
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Reduces boilerplate and suggested by coccinelle. Signed-off-by:
-
Jonathan Cameron authored
This only occurs once in the driver and isn't needed in this case either, so drop it. Signed-off-by:
Andy Shevchenko <andy.shevchenko@gmail.com>
-
Jonathan Cameron authored
Given the parameter is void *, casting to u8 * is unnecessary. Signed-off-by:
-
Jonathan Cameron authored
A mixture of: * Casts to u8 * for the val parameter which is void * and so needs no cast. * Explicit sizes when we can use sizeof on the destination / source variable. Not broken in anyway, I'm just trying to tidy up the is in the subsystem to avoid it getting cut and paste into new drivers. Signed-off-by:
-
Jonathan Cameron authored
A mixture of: * Unnecessary casts of val parameter to u8 * which makes little sense as the function take a void *. * Explicit sizes where we can use the destination type to define that. Note that's not true in all cases as we do read 3 bytes into 4 byte destinations. Note that noting was broken here, I'm just trying to ensure this doesn't get cut and paste into more drivers so cleaning these out subsystem wide. Signed-off-by:
Himanshu Jha <himanshujha199640@gmail.com> Reviewed-by:
-
Jonathan Cameron authored
regmap_bulk_read takes a void * for its val parameter. It certainly makes no sense to cast to a (u8 *) + no need to explicitly cast at all when converting another pointer type to void *. Signed-off-by:
Matt Ranostay <matt.ranostay@konsulko.com> Reviewed-by:
-
Jonathan Cameron authored
regmap_bulk_read takes a void * for its val parameter. It certainly makes no sense to cast to a (u8 *) + no need to explicitly cast at all when converting another pointer type to void *. Signed-off-by:
-
Lorenzo Bianconi authored
st_lsm6dsx is a standalone driver for STM IMU sensors and does not rely on st_sensor common framework, so it does not include st_sensor common definitions. In st_lsm6dsx_shub driver st_sensors.h is used just to introduce the default wai address for LIS3MDL sensor. Drop this largely unconnected include file and introduce the default wai address for LIS3MDL in st_lsm6dsx_ext_dev_settings register map Reviewed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. This is the last user of 'devm_iio_device_match()', so it can be removed as well in this patch. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
It's unused so far, so it can be removed. Also makes sense to remove it to discourage weird uses of this call during review. Signed-off-by:
-
Alexandru Ardelean authored
Moves this to be the first check, as it's very simple and fails the registration earlier, instead of potentially initializing the 'indio_dev->label' and checking for duplicate indexes, and then failing with this simple-check. This is a minor optimization, since '__iio_device_register()' will waste fewer validation cycles in case 'indio_dev->info' is NULL. Signed-off-by:
-
Alexandru Ardelean authored
This field doesn't seem used. It seems that only 'buffer->attrs' was ever used to extend sysfs attributes for an IIO buffer. Moving forward, it may not make sense to keep it. This patch removes the field and it's initialization code. Since we want to rework IIO buffer, to be able to add more buffers per IIO device, we will merge [somehow] the 'buffer' & 'scan_elements' groups, and we will continue to add the attributes to the 'buffer' group. Removing it here, will also make the rework here a bit smaller, since this code will not be present. Signed-off-by:
-
Christophe JAILLET authored
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'. Fixes: 1fd45670 ("iio: imu: adis: add support product ID check in adis_initial_startup") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Lars-Peter Clausen authored
Fix a typo. 'at the a time' -> 'at a time'. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Johan Jonker authored
The description below is already in use for px30.dtsi, but was somehow never added to a document, so add "rockchip,px30-saradc", "rockchip,rk3399-saradc" for saradc nodes on a px30 platform to rockchip-saradc.yaml. Signed-off-by:
Johan Jonker <jbx6244@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Johan Jonker authored
The description below is already in use for rk3308.dtsi, but was somehow never added to a document, so add "rockchip,rk3308-saradc", "rockchip,rk3399-saradc" for saradc nodes on a rk3308 platform to rockchip-saradc.yaml. Signed-off-by:
-
Johan Jonker authored
Current dts files with 'saradc' nodes are manually verified. In order to automate this process rockchip-saradc.txt has to be converted to yaml. Signed-off-by:
-
Lars-Peter Clausen authored
The IIO DMA buffer is a DMA buffer implementation. As such it should include buffer_impl.h rather than buffer.h. The include to buffer.h in buffer-dma.h should be buffer_impl.h so it has access to the struct iio_buffer definition. The code currently only works because all places that use buffer-dma.h include buffer_impl.h before it. The include to buffer.h in industrialio-buffer-dma.c can be removed since those file does not reference any of buffer consumer functions. Signed-off-by:
-
Alexandru Lazar authored
Add driver for the Maxim MAX1241 12-bit, single-channel ADC. Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdfReviewed-by:
Alexandru Lazar <alazar@startmail.com> Reviewed-by:
-
Alexandru Lazar authored
Add device-tree bindings documentation for the MAX1241 device driver. Signed-off-by:
-
Gaëtan André authored
Add support for STMicroelectronics LISHH12 accelerometer in st_accel framework. https://www.st.com/resource/en/datasheet/lis2hh12.pdfSigned-off-by:
Gaëtan André <rvlander@gaetanandre.eu> Reviewed-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Gaëtan André authored
Add LIS2HH12 compatible entry. Signed-off-by:
-
Jimmy Assarsson authored
Add LIS3MDL register map to sensor hub device table. Tested with LSM6DSM. Signed-off-by:
Jimmy Assarsson <jimmyassarsson@gmail.com> Signed-off-by:
-
Jimmy Assarsson authored
Support for sensor with up to 8 different ODR settings. Required for supporting LIS3MDL as sensor hub slave device. Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
Rohit Sarkar <rohitsarkar5398@gmail.com> Tested-by Nuno Sá <nuno.sa@analog.com> Signed-off-by:
-
Rohit Sarkar authored
debugfs_create_file_unsafe does not protect the fops handed to it against file removal. DEFINE_DEBUGFS_ATTRIBUTE makes the fops aware of the file lifetime and thus protects it against removal. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce st_lsm6dsx_shub_set_full_scale routine in order to configure the i2c slave device sensitivity Tested-by:
-
Fabrice Gasnier authored
Convert the STM32 DAC binding to DT schema format using json-schema Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by:
-
Nishant Malpani authored
Convert the TSL2563 device tree bindings to the new YAML format. Signed-off-by:
Nishant Malpani <nish.malpani25@gmail.com> Reviewed-by:
-
Alexandru Ardelean authored
This change adds the binding doc for the AD9467 ADC. Signed-off-by:
-
