- 19 Aug, 2015 1 commit
-
-
Florian Westphal authored
make payload expression aware of the fact that VLAN offload may have removed a vlan header. When we encounter tagged skb, transparently insert the tag into the register so that vlan header matching can work without userspace being aware of offload features. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 17 Aug, 2015 2 commits
-
-
Daniel Borkmann authored
This work adds the possibility of deriving the zone id from the skb->mark field in a scalable manner. This allows for having only a single template serving hundreds/thousands of different zones, for example, instead of the need to have one match for each zone as an extra CT jump target. Note that we'd need to have this information attached to the template as at the time when we're trying to lookup a possible ct object, we already need to know zone information for a possible match when going into __nf_conntrack_find_get(). This work provides a minimal implementation for a possible mapping. In order to not add/expose an extra ct->status bit, the zone structure has been extended to carry a flag for deriving the mark. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Daniel Borkmann authored
This work adds a direction parameter to netfilter zones, so identity separation can be performed only in original/reply or both directions (default). This basically opens up the possibility of doing NAT with conflicting IP address/port tuples from multiple, isolated tenants on a host (e.g. from a netns) without requiring each tenant to NAT twice resp. to use its own dedicated IP address to SNAT to, meaning overlapping tuples can be made unique with the zone identifier in original direction, where the NAT engine will then allocate a unique tuple in the commonly shared default zone for the reply direction. In some restricted, local DNAT cases, also port redirection could be used for making the reply traffic unique w/o requiring SNAT. The consensus we've reached and discussed at NFWS and since the initial implementation [1] was to directly integrate the direction meta data into the existing zones infrastructure, as opposed to the ct->mark approach we proposed initially. As we pass the nf_conntrack_zone object directly around, we don't have to touch all call-sites, but only those, that contain equality checks of zones. Thus, based on the current direction (original or reply), we either return the actual id, or the default NF_CT_DEFAULT_ZONE_ID. CT expectations are direction-agnostic entities when expectations are being compared among themselves, so we can only use the identifier in this case. Note that zone identifiers can not be included into the hash mix anymore as they don't contain a "stable" value that would be equal for both directions at all times, f.e. if only zone->id would unconditionally be xor'ed into the table slot hash, then replies won't find the corresponding conntracking entry anymore. If no particular direction is specified when configuring zones, the behaviour is exactly as we expect currently (both directions). Support has been added for the CT netlink interface as well as the x_tables raw CT target, which both already offer existing interfaces to user space for the configuration of zones. Below a minimal, simplified collision example (script in [2]) with netperf sessions: +--- tenant-1 ---+ mark := 1 | netperf |--+ +----------------+ | CT zone := mark [ORIGINAL] [ip,sport] := X +--------------+ +--- gateway ---+ | mark routing |--| SNAT |-- ... + +--------------+ +---------------+ | +--- tenant-2 ---+ | ~~~|~~~ | netperf |--+ +-----------+ | +----------------+ mark := 2 | netserver |------ ... + [ip,sport] := X +-----------+ [ip,port] := Y On the gateway netns, example: iptables -t raw -A PREROUTING -j CT --zone mark --zone-dir ORIGINAL iptables -t nat -A POSTROUTING -o <dev> -j SNAT --to-source <ip> --random-fully iptables -t mangle -A PREROUTING -m conntrack --ctdir ORIGINAL -j CONNMARK --save-mark iptables -t mangle -A POSTROUTING -m conntrack --ctdir REPLY -j CONNMARK --restore-mark conntrack dump from gateway netns: netperf -H 10.1.1.2 -t TCP_STREAM -l60 -p12865,5555 from each tenant netns tcp 6 431995 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=5555 dport=12865 zone-orig=1 src=10.1.1.2 dst=10.1.1.1 sport=12865 dport=1024 [ASSURED] mark=1 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 431994 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=5555 dport=12865 zone-orig=2 src=10.1.1.2 dst=10.1.1.1 sport=12865 dport=5555 [ASSURED] mark=2 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 299 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=39438 dport=33768 zone-orig=1 src=10.1.1.2 dst=10.1.1.1 sport=33768 dport=39438 [ASSURED] mark=1 secctx=system_u:object_r:unlabeled_t:s0 use=1 tcp 6 300 ESTABLISHED src=40.1.1.1 dst=10.1.1.2 sport=32889 dport=40206 zone-orig=2 src=10.1.1.2 dst=10.1.1.1 sport=40206 dport=32889 [ASSURED] mark=2 secctx=system_u:object_r:unlabeled_t:s0 use=2 Taking this further, test script in [2] creates 200 tenants and runs original-tuple colliding netperf sessions each. A conntrack -L dump in the gateway netns also confirms 200 overlapping entries, all in ESTABLISHED state as expected. I also did run various other tests with some permutations of the script, to mention some: SNAT in random/random-fully/persistent mode, no zones (no overlaps), static zones (original, reply, both directions), etc. [1] http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/57412/ [2] https://paste.fedoraproject.org/242835/65657871/Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 11 Aug, 2015 1 commit
-
-
Daniel Borkmann authored
This patch replaces the zone id which is pushed down into functions with the actual zone object. It's a bigger one-time change, but needed for later on extending zones with a direction parameter, and thus decoupling this additional information from all call-sites. No functional changes in this patch. The default zone becomes a global const object, namely nf_ct_zone_dflt and will be returned directly in various cases, one being, when there's f.e. no zoning support. Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
- 07 Aug, 2015 36 commits
-
-
Andreas Schultz authored
- Move the nfnl_acct_list into the network namespace, initialize and destroy it per namespace - Keep track of refcnt on nfacct objects, the old logic does not longer work with a per namespace list - Adjust xt_nfacct to pass the namespace when registring objects Signed-off-by: Andreas Schultz <aschultz@tpip.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch adds a new NFTA_LIMIT_TYPE netlink attribute to indicate the type of limiting. Contrary to per-packet limiting, the cost is calculated from the packet path since this depends on the packet length. The burst attribute indicates the number of bytes in which the rate can be exceeded. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
The cost per packet can be calculated from the control plane path since this doesn't ever change. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch adds the burst parameter. This burst indicates the number of packets that can exceed the limit. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch prepares the introduction of per-byte limiting. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Rework the limit expression to use a token-based limiting approach that refills the bucket gradually. The tokens are calculated at nanosecond granularity instead jiffies to improve precision. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
To prepare introduction of bytes ratelimit support. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This new expression uses the nf_dup engine to clone packets to a given gateway. Unlike xt_TEE, we use an index to indicate output interface which should be fine at this stage. Moreover, change to the preemtion-safe this_cpu_read(nf_skb_duplicated) from nf_dup_ipv{4,6} to silence a lockdep splat. Based on the original tee expression from Arturo Borrero Gonzalez, although this patch has diverted quite a bit from this initial effort due to the change to support maps. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Extracted from the xtables TEE target. This creates two new modules for IPv4 and IPv6 that are shared between the TEE target and the new nf_tables dup expressions. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
Use IS_ENABLED(CONFIG_NF_CONNTRACK) instead. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Pablo Neira Ayuso authored
This patch converts the existing seqlock to per-cpu counters. Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Suggested-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
-
Jason A. Donenfeld authored
The pr_debug family of functions turns into a no-op when -DDEBUG is not specified, opting instead to call "no_printk", which gets compiled to a no-op (but retains gcc's nice warnings about printf-style arguments). The problem with net_dbg_ratelimited is that it is defined to be a variant of net_ratelimited_function, which expands to essentially: if (net_ratelimit()) pr_debug(fmt, ...); When DEBUG is not defined, then this becomes, if (net_ratelimit()) ; This seems benign, except it isn't. Firstly, there's the obvious overhead of calling net_ratelimit needlessly, which does quite some book keeping for the rate limiting. Given that the pr_debug and net_dbg_ratelimited family of functions are sprinkled liberally through performance critical code, with developers assuming they'll be compiled out to a no-op most of the time, we certainly do not want this needless book keeping. Secondly, and most visibly, even though no debug message is printed when DEBUG is not defined, if there is a flood of invocations, dmesg winds up peppered with messages such as "net_ratelimit: 320 callbacks suppressed". This is because our aforementioned net_ratelimit() function actually prints this text in some circumstances. It's especially odd to see this when there isn't any other accompanying debug message. So, in sum, it doesn't make sense to have this function's current behavior, and instead it should match what every other debug family of functions in the kernel does with !DEBUG -- nothing. This patch replaces calls to net_dbg_ratelimited when !DEBUG with no_printk, keeping with the idiom of all the other debug print helpers. Also, though not strictly neccessary, it guards the call with an if (0) so that all evaluation of any arguments are sure to be compiled out. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds null dev check for the 'cfg->rc_via_table == NEIGH_LINK_TABLE or dev_get_by_index() failed' case Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Schichan says: ==================== test_bpf improvements Please find below the patch series with my latest changes to test_bpf. The first patch checks for unexpected NULL generated skbs before running the filter. The second patch adds the possibility for tests to generate fragmented skbs. The third patch tests LD_ABS and LD_IND on fragmented skbs. The fourth patch adds the possibility to restrict the tests being run by specifying the name/id/range of the test(s) to run via module parameters. The fifth patch tests LD_ABS and LD_IND on non fragmented skbs with various sizes and alignments. The sixth and final patch checks that the interpreter or JIT correctly resets A and X to 0. This serie is against today's net-next tree. Changes in V2: * move declaration of 'ptr' in if() block in patch 2/6. * fix various typos in patch 4/6 * rework default init of test_range array and cleanup exclude_test() return condition in patch 4/6. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
It is mandatory for the JIT or interpreter to reset the A and X registers to 0 before running the filter. Check that it is the case on various ALU and JMP instructions. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
This exerces the LD_ABS and LD_IND instructions for various sizes and alignments. This also checks that X when used as an offset to a BPF_IND instruction first in a filter is correctly set to 0. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
When developping on the interpreter or a particular JIT, it can be interesting to restrict the tests list to a specific test or a particular range of tests. This patch adds the following module parameters to the test_bpf module: * test_name=<string>: only the specified named test will be run. * test_id=<number>: only the test with the specified id will be run (see the output of test_bpf without parameters to get the test id). * test_range=<number>,<number>: only the tests within IDs in the specified id range are run (see the output of test_bpf without parameters to get the test ids). Any invalid range, test id or test name will result in -EINVAL being returned and no tests being run. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
These new tests exercise various load sizes and offsets crossing the head/fragment boundary. Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
This introduce a new test->aux flag (FLAG_SKB_FRAG) to tell the populate_skb() function to add a fragment to the test skb containing the data specified in test->frag_data). Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Nicolas Schichan authored
Signed-off-by: Nicolas Schichan <nschichan@freebox.fr> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Amir Vadai says: ==================== net/mlx5e: Driver updates 04-Aug-2015 This patchset introduces two features to the ConnectX-4 driver: Patch 8/8 ("Support physical port counters") exposes some hardware counters through ethtool. Rest of the patches are preparation and usage of what we call light-weight netdev open/close. Some flows that used to be in the ndo_open/stop are moved to the PCI probe/remove flows - i.e. we will make the netdev open/close operations more "light-weight". The benefits of this change are: 1) Reduce the execution time of the stop/open operations. 2) Avoid saving SW shadows of resource configurations that must persist through stop/open operations (e.g flow table steering rules), and avoid deleting/applying them from/to the device upon netdev stop/open. 3) Avoid synchronizing threads that access those resources with the netdev stop/open threads. Instead of create/destroy the resource during netdev open/stop, This patchset changes the behavior such that upon netdev stop, traffic is redirected to a "Drop RQ" (a RQ that silently drops, at the NIC HW level all incoming traffic). After redirecting the traffic, RX/TX software resources could be destroyed. During netdev open, the RX/TX rings are created and traffic is redirected to the RX rings. Patchset was applied and tested over commit ba7591d8 ("ebpf: add skb->hash to offset map for usage in {cls, act}_bpf or filters") ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gal Pressman authored
Added physical port counters in the following standard formats to ethtool statistics: - IEEE 802.3 - RFC2863 - RFC2819 Signed-off-by: Gal Pressman <galp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
Now that TIRs, TISs and flow tables are kept alive while the netdev is stopped (after executing ndo_stop()) we can do the following improvements: - Obsolete the active_vlans SW shadow. - Do not delete/add flow table rules upon ndo_stop/open. In addition to simplifying the flow, this change also fastens the ndo_open/close operations. - Obsolete synchronization of threads accessing the flow tables with the netdev stop/open threads. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
It does not make sense to allow events while the netdev is unregistered. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
Rename some functions that used to be invoked upon ndo_open/stop and are now invoked upon create/destroy_netdev() in order to better hint their place in the flow. Change some functions location in the file so that functions involved in ndo_open/stop flow will not be interleaved with other functions. This is a cosmetic change, no logical change here. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
Create/destroy TIRs, TISs and flow tables upon PCI probe/remove rather than upon the netdev ndo_open/stop. Upon ndo_stop(), redirect all RX traffic to the (lately introduced) "Drop RQ" and then close only the RX/TX rings, leaving the TIRs, TISs and flow tables alive. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
To be used by the mlx5 Eth driver in following commit. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
RX traffic routed to this RQ will be silently dropped, at the NIC HW level. This is in preparation for netdev "light-weight" open/stop flow change described in previous commit. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Achiad Shochat authored
Generally an RX packet flows through the following objects: Flow table --> TIR --> RQT --> RQ Where: - TIR stands for "Transport Interface Receive", defining the RSS and LRO paramaters. - RQT stands for "RQ Table", implementing the RSS indirection table. - RQ stands for "Receive Queue" For flows that do not need LRO, nor RSS, the driver made a shortcut to the above RX flow by pointing to the RQ directly from the TIR, yielding this flow: Flow table --> TIR --> RQ In this commit we remove this shortcut by "inserting" a single-RQ RQT between the TIR and the RQ, i.e RX packets will reach the same RQ but will go through an RQT of size 1, pointing to just a single RQ. This way the RX traffic re-direction to/from the "Drop RQ" will be more uniform (AKA "one flow"), as it will involve only RQTs re-direction and no TIRs re-direction. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Mugunthan V N says: ==================== CPSW interrupt handling cleanup and performance improvement This patch series removes the irq controller disable interrupt and adding a napi for tx event handling which improves the performance by ~180Mbps on dra7-evm [ 5] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 44176 [ 5] 0.0-60.0 sec 1.48 GBytes 210 Mbits/sec [ 4] local 192.168.10.116 port 5001 connected with 192.168.10.165 port 33257 [ 4] 0.0-60.0 sec 2.71 GBytes 386 Mbits/sec Changes from initial version: * Added a patch to have napi only for first interface as there is no use of having seperate napis for each interface as the interrupt is shared by both interface and only one napi is scheduled for each interrupt. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Instead of processing tx events in isr adding separate napi for tx which improves performance by ~180Mbps with omap2plus_defconfig on DRA74x platform. Also cleaning up rx napis by renaming to napi_rx for better understanding the code. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
Since interrupt is shared between the two ethernet interface and in isr only one napi is scheduled at an instance so having two napis doesn't make any difference. So making napi also as a common resource for the dual ethernet interfaces. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Mugunthan V N authored
CPSW interrupts can be disabled by masking CPSW interrupts and clearing interrupt by writing appropriate EOI. So removing all disable_irq/enable_irq as discussed in [1] [1] http://patchwork.ozlabs.org/patch/492741/Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dan Carpenter authored
We recently changed this code from returning NULL to returning ERR_PTR. There are some left over NULL assignments which we can remove. We can preserve the error code from ip_route_output() instead of always returning -ENODEV. Also these functions use a mix of gotos and direct returns. There is no cleanup necessary so I changed the gotos to direct returns. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x, cnic, bnx2fc: add support for BD Commit 230d00eb ("bnx2x: new Multi-function mode - BD") added support for a new multi-function mode, but it added only the support required by bnx2x for L2 interfaces. This adds the required changes to support the new multi-function mode in the offloaded storage protocols. Dave, Please consider applying this series to `net-next'. Do notice that this involves non-networking driver changes - but sending this as a single series seemed like the best approach as we had to have bnx2x changes to support the new functionality. If this is problematic, please tell us what's the preferred solution here. Changes from previous versions ------------------------------ - From v1 - no actual changes; v1 failed to reach netdev so in order to keep things in line I've termed this one v2. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Carnuccio authored
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-