- 10 May, 2006 4 commits
-
-
Mike Christie authored
debugged by Ming and Rohan: The problem Ming and Rohan debugged was that during a normal session login, open-iscsi is not incrementing the exp_statsn counter. It was stuck at zero. From the RFC, it looks like if the login response PDU has a successful status then we should be incrementing that value. Also from the RFC, it looks like if when we drop a connection then reconnect, we should be using the exp_statsn from the old connection in the next relogin attempt. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
James Bottomley <James.Bottomley@SteelEye.com>
-
Or Gerlitz authored
align printk output Signed-off-by:
Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by:
-
Mike Christie authored
from patmans@us.ibm.com and michaelc@cs.wisc.edu Fix bugs when forcing a mgmt task to fail and allow session recovery to cleanup the session/connection of any running mgmt tasks. When called during the in login state. Signed-off-by:
-
Or Gerlitz authored
add transport end point callbacks so iscsi drivers that cannot connect from userspace, like iscsi tcp, using sockets do not have to implement their own socket infrastructure. Signed-off-by:
-
- 20 Apr, 2006 1 commit
-
-
Andrew Morton authored
drivers/scsi/scsi_lib.c: In function `scsi_kmap_atomic_sg': drivers/scsi/scsi_lib.c:2394: warning: unsigned int format, different type arg (arg 3) drivers/scsi/scsi_lib.c:2394: warning: unsigned int format, different type arg (arg 4) Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
- 15 Apr, 2006 1 commit
-
-
akpm@osdl.org authored
drivers/scsi/scsi_scan.c: In function `scsi_probe_and_add_lun': drivers/scsi/scsi_scan.c:926: warning: unused variable `vend' drivers/scsi/scsi_scan.c:926: warning: unused variable `mod' drivers/scsi/scsi_scan.c: At top level: drivers/scsi/scsi_scan.c:829: warning: `scsi_inq_str' defined but not used Fix those, tighten up the (somewhat poorly-designed) logging macro and fix some coding-style warts. Signed-off-by:
-
- 14 Apr, 2006 13 commits
-
-
Guennadi Liakhovetski authored
The current dc395x driver uses PIO to transfer up to 4 bytes which do not get transferred by DMA (under unclear circumstances). For this the driver uses page_address() which is broken on highmem. Apart from this the actual calculation of the virtual address is wrong (even without highmem). So, e.g., for reading it reads bytes from the driver to a wrong address and returns wrong data, I guess, for writing it would just output random data to the device. The proper fix, as suggested by many, is to dynamically map data using kmap_atomic(page, KM_BIO_SRC_IRQ) / kunmap_atomic(virt). The reason why it has not been done until now, although I've done some preliminary patches more than a year ago was that nobody interested in fixing this problem was able to reliably reproduce it. Now it changed - with the help from Sebastian Frei (CC'ed) I was able to trigger the PIO path. Thus, I was also able to test and debug it. There are 4 cases when PIO is used in dc395x - data-in / -out with and without scatter-gather. I was able to reproduce and test only data-in with and without SG. So, the data-out path is still untested, but it is also somewhat simpler than the data-in. Fredrik Roubert (also CC'ed) also had PIO triggering on his system, and in his case it was data-out without SG. It would be great if he could test the attached patch on his system, but even if he cannot, I would still request to apply the patch and just wait if anybody cries... Implementation: I put 2 new functions in scsi_lib.c and their declarations in scsi_cmnd.h. I exported them without _GPL, although, I don't feel strongly about that - not many drivers are likely to use them. But there is at least one more - I want to use them in tmscsim.c. Whether these are the right files for the functions and their declarations - not sure either. Actually, they are not scsi-specific, so, might go somewhere around other scattergather magic? They are not platform specific either, and most SG functions are defined under arch/*/... As these issues were discussed previously there were some more routines suggested to manipulate scattergather buffers, I think, some of them were needed around crypto code... So, might be a common place reasonable, like lib/scattergather.c? I am open here. Signed-off-by: -
FUJITA Tomonori authored
Convert kmalloc + memset to kcalloc in ibmvscsi Signed-off-by:
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by:
Dave Boutcher <sleddog@us.ibm.com> Signed-off-by:
-
James Bottomley authored
Conflicts: include/scsi/scsi_devinfo.h Same number for two BLIST flags: BLIST_MAX_512 and BLIST_ATTACH_PQ3 Signed-off-by: -
James Bottomley authored
Any end device that can't support any of the scanning protocols shouldn't be scanned, so set its id to -1 to prevent scsi_scan_target() being called for it. Signed-off-by: -
Mike Christie authored
This just converts iscsi_tcp to the lib Signed-off-by:
-
Mike Christie authored
There is a lot of code duplcited between iscsi_tcp and the upcoming iscsi_iser driver. This patch puts the duplicated code in a lib. There is more code to move around but this takes care of the basics. For iscsi_offload if they use the lib we will probably move some things around. For example in the queuecommand we will not assume that the LLD wants to do queue_work, but it is better to handle that later when we know for sure what iscsi_offload looks like (we could probably do this for iscsi_iser though to). Ideally I would like to get the iscsi_transports modules to a place where all they really have to do is put data on the wire, but how to do that will hopefully be more clear when we see other modules like iscsi_offload. Or maybe iscsi_offload will not use the lib and it will just be iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that is allowed in mainline. Signed-off-by:
-
Mike Christie authored
The current iscsi_tcp eh is not nicely setup for dm-multipath and performs some extra task management functions when they are not needed. The attached patch: - Fixes the TMF issues. If a session is rebuilt then we do not send aborts. - Fixes the problem where if the host reset fired, we would return SUCCESS even though we had not really done anything yet. This ends up causing problem with scsi_error.c's TUR. - If someone has turned on the userspace nop daemon code to try and detect network problems before the scsi command timeout we can now drop and clean up the session before the scsi command timesout and fires the eh speeding up the time it takes for a command to go from one patch to another. For network problems we fail the command with DID_BUS_BUSY so if failfast is set scsi_decide_disposition fails the command up to dm for it to try on another path. - And we had to add some basic iscsi session block code. Previously if we were trying to repair a session we would retrun a MLQUEUE code in the queuecommand. This worked but it was not the most efficient or pretty thing to do since it would take a while to relogin to the target. For iscsi_tcp/open-iscsi a lot of the iscsi error handler is in userspace the block code is pretty bare. We will be adding to that for qla4xxx. Signed-off-by:
-
Mike Christie authored
For iscsi boot when going from initramfs to the real root we need to stop the userpsace iscsi daemon. To later restart it iscsid needs to be able to rebuild itself and part of that process is matching a session running the kernel with the iscsid representation. To do this the attached patch adds several required iscsi values. If the LLD does not provide them becuase, login is done in userspace, then the transport class and userspace set ths up for the LLD. Signed-off-by:
-
Mike Christie authored
from hare@suse.de and michaelc@cs.wisc.edu hw iscsi like qla4xxx does not allocate a host per session and for userspace it is difficult to restart iscsid using the "iscsi handles" for the session and connection, so this patch just has the class or userspace allocate the id for the session and connection. Note: this breaks userspace and requires users to upgrade to the newest open-iscsi tools. Sorry about his but open-iscsi is still too new to say we have a stable user-kernel api and we were not good nough designers to know that other hw iscsi drivers and iscsid itself would need such changes. Actually we sorta did but at the time we did not have the HW available to us so we could only guess. Luckily, the only tools hooking into the class are the open-iscsi ones or other tools like iscsitart hook into the open-iscsi engine from userspace or prgroams like anaconda call our tools so they are not affected. Signed-off-by:
-
Kurt Garloff authored
Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 3/3: 3. Implement the blacklist flag BLIST_ATTACH_PQ3 that makes the scsi scanning code register PQ3 devices and continues scanning; only sg will attach thanks to scsi_bus_match(). Signed-off-by:
Kurt Garloff <garloff@suse.de> Signed-off-by:
-
Kurt Garloff authored
Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This patch 2/3: If a PQ3 device is found, log a message that describes the device (INQUIRY DATA and C:B:T:U tuple) and make a suggestion for blacklisting it. Signed-off-by:
-
Kurt Garloff authored
Some devices report a peripheral qualifier of 3 for LUN 0; with the original code, we would still try a REPORT_LUNS scan (if SCSI level is >= 3 or if we have the BLIST_REPORTLUNS2 passed in), but NOT any sequential scan. Also, the device at LUN 0 (which is not connected according to the PQ) is not registered with the OS. Unfortunately, SANs exist that are SCSI-2 and do NOT support REPORT_LUNS, but report a unknown device with PQ 3 on LUN 0. We still need to scan them, and most probably we even need BLIST_SPARSELUN (and BLIST_LARGELUN). See the bug reference for an infamous example. This is patch 1/3: If we end up in sequential scan, at least try LUN 1 for devices that reported a PQ of 3 for LUN 0. Also return blacklist flags, even for PQ3 devices. Signed-off-by:
-
Moore, Eric authored
Driver panic when RAID logical volume was present when driver loaded, or when a RAID logical volume was created on the fly. This issue was created in due to recent scsi_transport_sas change, when sas_read_port_mode_page was added into the mptsas drivers slave_config entry point. This new API expects that all sdev's to be assocated to an rphy, however that is not the case for logical volumes, as they are created using scsi_add_device, instead of sas_rphy_add(). Signed-off-by:
Eric Moore <Eric.Moore@lsil.com> Signed-off-by:
-
- 13 Apr, 2006 21 commits
-
-
adam radford authored
Equivalent of the same patch for the 3w-xxxx driver. Signed-off-by:
Adam Radford <linuxraid@amcc.com> Signed-off-by:
-
Tejun Heo authored
scsi_kill_request() completes requests via normal SCSI completion path which decrements busy counts; however, requests which get passed to scsi_kill_request() aren't holding busy counts and scsi_kill_request() don't increment them before invoking completion path resulting in incorrect busy counts. Bump up busy counts before invoking completion path. Signed-off-by:
Tejun Heo <htejun@gmail.com> Signed-off-by:
-
James Smart authored
As previously reported via Michael Reed, the FC transport took a hit in 2.6.15 (perhaps a little earlier) when we solved a recursion error. There are 2 deadlocks occurring: - With scan and the delete items sharing the same workq, flushing the workq for the delete code was getting it stalled behind a very long running scan code path. - There's a deadlock where scsi_remove_target() has to sit behind scsi_scan_target() due to contention over the scan_lock(). This patch resolves the 1st deadlock and significantly reduces the odds of the second. So far, we have only replicated the 2nd deadlock on a highly-parallel SMP system. More on the 2nd deadlock in a following email. This patch reworks the transport to: - Only use the scsi host workq for scanning - Use 2 other workq's internally. One for deletions, the other for scheduled deletions. Originally, we tried this with a single workq, but the occassional flushes of the scheduled queues was hitting the second deadlock with a slightly higher frequency. In the future, we'll look at the LLDD's and the transport to see if we can get rid of this extra overhead. - When moving to the other workq's we tightened up some object states and some lock handling. - Properly syncs adds/deletes - minor code cleanups - directly reference fc_host_attrs, rather than through attribute macros - flush the right workq on delayed work cancel failures. Large kudos to Michael Reed who has been working this issue for the last month. Signed-off-by: -
Hannes Reinecke authored
When a target is added aic79xx tries to be overly clever: it changes the command on the fly to TEST UNIT READY and tries to requeue the original command. Sadly this breaks SCSI compability and of course the midlayer is getting a bit confused by it. So we're just removing that bit of code and let the midlayer deal with it. It's clever enough by now. And the driver code is getting simpler. Signed-off-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
-
FUJITA Tomonori authored
It's no longer needed after the convrsion to use the linux srp.h file. Signed-off-by:
-
Hannes Reinecke authored
As James B. correctly noted, ahd_reset_channel() in ahd_linux_bus_reset() should be protected by ahd_lock(). However, the main reason for not doing so was a deadlock with the interesting polling mechanism to detect the end a bus reset. This patch replaces the polling mechanism with a saner signalling via flags; it also gives us the benefit of detecting any multiple calls to ahd_reset_channel(). Signed-off-by:
-
James Bottomley authored
Original From: Ingo Flaschberger <if@xip.at> To support the RA4100 array from Compaq. This patch now correctly handles SCSI_UNKNOWN types with regard to BLIST_REPORTLUNS2 (allow it) and cdb[1] LUN inclusion (don't). It also allows a BLIST_MAX_512 flag to restrict the maximum transfer length to 512 blocks (apparently this is an RA4100 problem). Signed-off-by: -
Matthew Wilcox authored
When spinlock debugging is turned on, a struct completion grows beyond the size allowed for the scsi_pointer. So move the struct completion back onto the stack. The additional memory barriers are to keep us from completing a random piece of kernel stack if the command happens to complete after the error handling has finished. Signed-off-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Brian King authored
Bump ipr driver version to 2.1.3 Signed-off-by:
Brian King <brking@us.ibm.com> Signed-off-by:
-
Brian King authored
Encapsulate some more of the device reset processing in preparation for SATA support. Signed-off-by:
-
Brian King authored
Remove some unused printk macros, make some more robust, and convert some to use standard printk macros when possible. Signed-off-by:
-
Brian King authored
Simplify the dumping of the command status area by removing some device specific information that has proven to not be worthwhile. Signed-off-by:
-
Brian King authored
Fixup a check used by the ipr driver to determine if a given device is a SCSI disk. Due to the addition of support for attaching SATA devices, this check needs to be more robust. Signed-off-by:
-
Brian King authored
Instead of NULLing the resource entry pointer when a disk goes away to prevent any new commands being sent to it, set the adapter resource handle to an invalid value so new ops getting sent to it will fail with a selection timeout response. This patch is needed for future SATA patches. Signed-off-by:
-
Douglas Gilbert authored
when the sg driver is unable to setup direct IO, free that scatter gather list prior to falling back to indirect IO Further to this thread started by Bryan Holty: http://marc.theaimsgroup.com/?l=linux-scsi&m=114306885116728&w=2 Here is the reworked patch again. This time it has been tested with a program provided by Bryan. Signed-off-by:
Douglas Gilbert <dougg@torque.net> Signed-off-by:
-
James Bottomley authored
necessary to make the domain class use the internal structures Signed-off-by: -
KAMEZAWA Hiroyuki authored
for_each_cpu() actually iterates across all possible CPUs. We've had mistakes in the past where people were using for_each_cpu() where they should have been iterating across only online or present CPUs. This is inefficient and possibly buggy. We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the future. This patch replaces for_each_cpu with for_each_possible_cpu. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by:
-
Matthew Wilcox authored
Signed-off-by:
-
Matthew Wilcox authored
This patch enables clustering and sets max_sectors to 0xffff to enable reading and writing of large blocks with tapes (and large transfers with sg). This change is needed after the sg and st drivers started using chained bios through scsi_request_async() in 2.6.16. Signed-off-by:
Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by:
-
Matthew Wilcox authored
Use wait_for_completion_timeout() instead of using a timer (as Christoph Hellwig did for aic7xxx). That lets me eliminate the sym_eh_wait structure; the struct completion, the old_done pointer and the to_do flag can be folded into the sym_ucmd (which overrides the scsi_pointer in scsi_cmnd). The sym_eh_done() function becomes much simpler as the timeout handling is done in sym_eh_handler() directly. The host_lock can be unlocked earlier, and I cache the host in a local variable to make accesses to it quicker. Signed-off-by:
-
Matthew Wilcox authored
The PDC code can set the bus mode, but we were ignoring that setting. Also move the code that determines bus mode into its own function. Signed-off-by:
-
