- 07 Nov, 2011 35 commits
-
-
Mat Martineau authored
AMP channels can be moved between BR/EDR and AMP controllers using a sequence of signals. Every attempted channel move involves a series of four signals: Move Initiator Move Responder | | | Move Channel Request | | ----------------------------> | | | | Move Channel Response | | <---------------------------- | | | | Move Channel Confirm | | ----------------------------> | | | | Move Channel Confirm Response | | <---------------------------- | All four signals are sent even if the move fails. Signed-off-by:Mat Martineau <mathewm@codeaurora.org> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Acked-by:
Andrei Emeltchenko <andrei.emeltchenko@intel.com> Signed-off-by:
Gustavo F. Padovan <padovan@profusion.mobi>
-
Mat Martineau authored
The A2MP fixed channel bit is only set when high-speed mode is enabled. Signed-off-by:
-
Mat Martineau authored
Symbolic fixed channel IDs will be used instead of magic numbers. Signed-off-by:
-
Mat Martineau authored
Handle both "create channel request" and "create channel response". Signed-off-by:
-
Mat Martineau authored
AMP channel creation and channel moves are coordinated using the L2CAP signaling channel. These definitions cover the "create channel", "move channel", and "move channel confirm" signals. Signed-off-by:
-
Mat Martineau authored
Each channel has a policy to require BR/EDR (the default), prefer BR/EDR, or prefer AMP. Check for valid policy value and L2CAP mode. Signed-off-by:
-
Mat Martineau authored
This variable is currently only accessible within l2cap_core.c, but it is also needed in l2cap_sock.c Signed-off-by:
-
Mat Martineau authored
Allow control of AMP functionality on L2CAP sockets. By default, connections will be restricted to BR/EDR. Manipulating the BT_CHANNEL_POLICY option allows for channels to be moved to or created on AMP controllers. Signed-off-by:
-
Andrei Emeltchenko authored
tx_win_max is initialized during L2CAP configuration phase. For fixed channels (e.g. A2MP) we want to have it initialized when channel is created. Signed-off-by:
-
Luiz Augusto von Dentz authored
Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Acked-by:
-
Luiz Augusto von Dentz authored
To avoid starvation the priority is recalculated so that the starving channels are promoted to HCI_PRIO_MAX - 1 (6). HCI_PRIO_MAX (7) is considered special, because it requires CAP_NET_ADMIN capability which can be used to provide more guaranties, so it is not used when promoting. Signed-off-by:
-
Luiz Augusto von Dentz authored
The quote is calculated based on the first buffer in the queue so if the priority changes to something lower than the priority of the first skb the quote needs to be recalculated. Signed-off-by:
-
Luiz Augusto von Dentz authored
This implement priority based scheduler using skbuffer priority set via SO_PRIORITY socket option. It introduces hci_chan_hash (list of HCI Channel/hci_chan) per connection, each item in this list refer to a L2CAP connection and it is used to queue the data for transmission. Signed-off-by:
-
Gustavo F. Padovan authored
This functions needs crtl_sock and intr_sock to be set first. Signed-off-by: -
David Herrmann authored
Calling module_put(THIS_MODULE) is *never* safe when we cannot go sure that we own at least two references. This is because the call may unload our module before it returns and then the "return" will jump into invalid memory. Gladly, module.h provides a wrapper for kthread-users: module_put_and_exit(). This puts our module and then exits the kthread without returning to the module. This patch fixes the hidp kthread to use this wrapper instead of manually freeing its own reference. See nfsd or lockd for other kthreads using this. Calling __module_get() inside the kthread is safe as the hidp module will always wait until the kthread sets "waiting_for_startup" to 0. Signed-off-by:
David Herrmann <dh.herrmann@googlemail.com> Signed-off-by:
-
David Herrmann authored
When loading the usb-configuration we do not signal the end of configuration on memory allocation error. This patch moves the memory allocation to the top so every error path uses "goto error" now to correctly send the usb-ctrl message when detecting some error. This also replaces GFP_ATOMIC with GFP_KERNEL as we are allowed to sleep here. Signed-off-by:
-
David Herrmann authored
A workqueue is allowed to sleep so we can safely use GFP_KERNEL instead of GFP_ATOMIC. This is still legacy code when the driver used timer BHs and not a worqueue. Signed-off-by:
-
David Herrmann authored
When disconnecting a bcm203x device we kill and destroy the usb-urb, however, there might still be a pending work-structure which resubmits the now invalid urb. To avoid this race condition, we simply set a shutdown-flag and synchronously kill the worker first. This also adds a comment to all schedule_work()s, as it is really not clear that they are used as replacement for short timers (which can be seen in the git history). Signed-off-by:
-
David Herrmann authored
We are allowed to sleep here so no need to use GFP_ATOMIC. The caller (ath3k_probe) calls request_firmware() which definitely sleeps. Hence, we should avoid using GFP_ATOMIC. Signed-off-by:
-
Johan Hedberg authored
The HCI_MGMT flag should only be set when user space requests the full controller information. This way we avoid potential issues with setting change events ariving before the actual read_controller_info command finishes. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
-
Szymon Janc authored
I've noticed that my CSR usb dongle was not working if it was plugged in when PC was booting. It looks like I get two HCI reset command complete events (see hcidump logs below). The root cause is reset called from off_timer. Timeout for this reset to complete is set to 250ms and my bt dongle requires more time for replying with command complete event. After that, chip seems to reply with reset command complete event for next non-reset command. Attached patch increase mentioned timeout to HCI_INIT_TIMEOUT, this value is already used for timeouting hci_reset_req in hci_dev_reset(). This might also be related to BT not working after suspend that was reported here some time ago. Hcidump log: 2011-09-12 23:13:27.379465 < HCI Command: Reset (0x03|0x0003) plen 0 2011-09-12 23:13:27.380797 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.380859 < HCI Command: Read Local Supported Features (0x04|0x000 3) plen 0 2011-09-12 23:13:27.760789 > HCI Event: Command Complete (0x0e) plen 4 Reset (0x03|0x0003) ncmd 1 status 0x00 2011-09-12 23:13:27.760831 < HCI Command: Read Local Version Information (0x04|0x00 01) plen 0 2011-09-12 23:13:27.764780 > HCI Event: Command Complete (0x0e) plen 12 Read Local Version Information (0x04|0x0001) ncmd 1 status 0x00 HCI Version: 1.1 (0x1) HCI Revision: 0x36f LMP Version: 1.1 (0x1) LMP Subversion: 0x36f Manufacturer: Cambridge Silicon Radio (10) Signed-off-by:Szymon Janc <szymon@janc.net.pl> Signed-off-by:
-
Szymon Janc authored
This was triggered by turning off encryption on ACL link when rfcomm was using high security. rfcomm_security_cfm (which is called from rx task) was closing DLC and this involves sending disconnect message (and locking socket). Move closing DLC to rfcomm_process_dlcs and only flag DLC for closure in rfcomm_security_cfm. BUG: sleeping function called from invalid context at net/core/sock.c:2032 in_atomic(): 1, irqs_disabled(): 0, pid: 1788, name: kworker/0:3 [<c0068a08>] (unwind_backtrace+0x0/0x108) from [<c05e25dc>] (dump_stack+0x20/0x24) [<c05e25dc>] (dump_stack+0x20/0x24) from [<c0087ba8>] (__might_sleep+0x110/0x12c) [<c0087ba8>] (__might_sleep+0x110/0x12c) from [<c04801d8>] (lock_sock_nested+0x2c/0x64) [<c04801d8>] (lock_sock_nested+0x2c/0x64) from [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) [<c05670c8>] (l2cap_sock_sendmsg+0x58/0xcc) from [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) [<c047cf6c>] (sock_sendmsg+0xb0/0xd0) from [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) [<c047cfc8>] (kernel_sendmsg+0x3c/0x44) from [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) [<c056b0e8>] (rfcomm_send_frame+0x50/0x58) from [<c056b168>] (rfcomm_send_disc+0x78/0x80) [<c056b168>] (rfcomm_send_disc+0x78/0x80) from [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) [<c056b9f4>] (__rfcomm_dlc_close+0x2d0/0x2fc) from [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) [<c056bbac>] (rfcomm_security_cfm+0x140/0x1e0) from [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) [<c0555ec0>] (hci_event_packet+0x1ce8/0x4d84) from [<c0550380>] (hci_rx_task+0x1d0/0x2d0) [<c0550380>] (hci_rx_task+0x1d0/0x2d0) from [<c009ee04>] (tasklet_action+0x138/0x1e4) [<c009ee04>] (tasklet_action+0x138/0x1e4) from [<c009f21c>] (__do_softirq+0xcc/0x274) [<c009f21c>] (__do_softirq+0xcc/0x274) from [<c009f6c0>] (do_softirq+0x60/0x6c) [<c009f6c0>] (do_softirq+0x60/0x6c) from [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) [<c009f794>] (local_bh_enable_ip+0xc8/0xd4) from [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) [<c05e5804>] (_raw_spin_unlock_bh+0x48/0x4c) from [<c040d470>] (data_from_chip+0xf4/0xaec) [<c040d470>] (data_from_chip+0xf4/0xaec) from [<c04136c0>] (send_skb_to_core+0x40/0x178) [<c04136c0>] (send_skb_to_core+0x40/0x178) from [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) [<c04139f4>] (cg2900_hu_receive+0x15c/0x2d0) from [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) [<c0414cb8>] (hci_uart_tty_receive+0x74/0xa0) from [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) [<c02cbd9c>] (flush_to_ldisc+0x188/0x198) from [<c00b2774>] (process_one_work+0x144/0x4b8) [<c00b2774>] (process_one_work+0x144/0x4b8) from [<c00b2e8c>] (worker_thread+0x198/0x468) [<c00b2e8c>] (worker_thread+0x198/0x468) from [<c00b9bc8>] (kthread+0x98/0xa0) [<c00b9bc8>] (kthread+0x98/0xa0) from [<c0061744>] (kernel_thread_exit+0x0/0x8) Signed-off-by:
Szymon Janc <szymon.janc@tieto.com> Signed-off-by:
-
Johan Hedberg authored
This patch adds the necessary code to send proper command status or command complete events to the start/stop discovery management commands. Before this patch these events were completely missing. Signed-off-by:
-
Luiz Augusto von Dentz authored
Signed-off-by:
-
Luiz Augusto von Dentz authored
This uses SO_PRIORITY to set the skbuffer priority field Signed-off-by:
-
Luiz Augusto von Dentz authored
When all items in the list have the same type there is no much of a point to use list_for_each except if you want to use the list pointer itself. Signed-off-by:
-
Andrei Emeltchenko authored
l2cap_set_timer function prints sk instead of chan pointer. Signed-off-by:
-
Andrei Emeltchenko authored
make code readable by removing magic numbers Signed-off-by:
-
Gustavo F. Padovan authored
Signed-off-by: -
Andrei Emeltchenko authored
Add L2CAP Config Pending state for EFS. Currently after receiving Config Response Pending respond with Config Response Success. ... > ACL data: handle 1 flags 0x02 dlen 16 L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0 Connection successful > ACL data: handle 1 flags 0x02 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 1009) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 45 L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 33 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 0, MTo 0, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) < ACL data: handle 1 flags 0x00 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 47 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 4 clen 33 Pending MTU 672 RFC 0x03 (Enhanced Retransmission, TxWin 63, MaxTx 3, RTo 2000, MTo 12000, MPS 498) EFS (Id 0x01, SerType Best Effort, MaxSDU 0xffff, SDUitime 0xffffffff, AccLat 0xffffffff, FlushTO 0x0000ffff) > ACL data: handle 1 flags 0x02 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 14 L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0 Success < ACL data: handle 1 flags 0x00 dlen 510 L2CAP(d): cid 0x0040 len 506 ext_ctrl 0x00010000 fcs 0xebe0 [psm 4113] I-frame: Start (len 672) TxSeq 0 ReqSeq 0 ... Signed-off-by: -
Paul Fertser authored
This makes it much easier for the users to understand why the driver refuses to load when the firmware is unavailable. Signed-off-by:
Paul Fertser <fercerpav@gmail.com> Signed-off-by:
-
David Herrmann authored
hci_unregister_dev cannot fail and always returns 0. The drivers already ignore the return value so we can safely make it return void. Signed-off-by:
-
David Herrmann authored
Make all bluetooth drivers ignore the return value of hci_unregister_dev as it always returns 0. In the next step, hci_unregister_dev can be modified to return void. Some of the drivers already ignore the return value (including btusb), hence, this will increase consitency in the bluetooth drivers. Signed-off-by:
-
David Herrmann authored
Remove old tasklets and replace by workqueue. To avoid reentrancy (which tasklets always avoid) we use the system_nrt_wq. Signed-off-by:
-
David Herrmann authored
Forward error codes from tty core to the rfcomm_init caller instead of using generic -1 errors. Signed-off-by:
-
- 17 Oct, 2011 5 commits
-
-
Andrei Emeltchenko authored
Add parsing Extended Flow Specification option in L2CAP Config Request Based upon haijun.liu <haijun.liu@atheros.com> series of patches (sent Sun, 22 Aug 2010) Signed-off-by:
-
Andrei Emeltchenko authored
Fix max_pdu_size calculationin for RFC. Change magic number to human readable defines. Signed-off-by:
-
Andrei Emeltchenko authored
Remove magic numbers for FCS, SDU LEN and PSM LEN when calculating packet payload. Signed-off-by:
-
Andrei Emeltchenko authored
Adds support for extended sequence numbers found in extended control fields. Signed-off-by:
-
Andrei Emeltchenko authored
There are three different Control Field formats: the Standard Control Field, the Enhanced Control Field, and the Extended Control Field. Patch adds function to handle all those fields seamlessly. Signed-off-by:
-
