Pull block fixes from Jens Axboe:
 "This contains a set of fixes for xen-blkback by way of Konrad, and a
  performance regression fix for blk-mq for shared tags.

  The latter could account for as much as a 50x reduction in
  performance, with the test case from the user with 500 name spaces. A
  more realistic setup on my end with 32 drives showed a 3.5x drop. The
  fix has been thoroughly tested before being committed"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: fix performance regression with shared tags
  xen-blkback: don't leak stack data via response ring
  xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
  xen/blkback: don't free be structure too early
  xen/blkback: fix disconnect while I/Os in flight

Pull networking fixes from David Miller:

 1) Fix refcounting wrt timers which hold onto inet6 address objects,
    from Xin Long.

 2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg.

 3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel.

 4) Several mlx5 driver fixes (firmware readiness, timestamp cap
    reporting, devlink command validity checking, tc offloading, etc.)
    From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz.

 5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan.

 6) Fix dst refcount bug in decnet, from Wei Wang.

 7) Netdev can be double freed in register_vlan_device(). Fix from Gao
    Feng.

 8) Don't allow object to be destroyed while it is being dumped in SCTP,
    from Xin Long.

 9) Fix dpaa_eth build when modular, from Madalin Bucur.

10) Fix throw route leaks, from Serhey Popovych.

11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table,
    also from Serhey Popovych.

12) Fix premature TX SKB free in stmmac, from Niklas Cassel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  igmp: add a missing spin_lock_init()
  net: stmmac: free an skb first when there are no longer any descriptors using it
  sfc: remove duplicate up_write on VF filter_sem
  rtnetlink: add IFLA_GROUP to ifla_policy
  ipv6: Do not leak throw route references
  dt-bindings: net: sms911x: Add missing optional VDD regulators
  dpaa_eth: reuse the dma_ops provided by the FMan MAC device
  fsl/fman: propagate dma_ops
  net/core: remove explicit do_softirq() from busy_poll_stop()
  fib_rules: Resolve goto rules target on delete
  sctp: ensure ep is not destroyed before doing the dump
  net/hns:bugfix of ethtool -t phy self_test
  net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
  cxgb4: notify uP to route ctrlq compl to rdma rspq
  ip6_tunnel: Correct tos value in collect_md mode
  decnet: always not take dst->__refcnt when inserting dst into hash table
  ip6_tunnel: fix potential issue in __ip6_tnl_rcv
  ip_tunnel: fix potential issue in ip_tunnel_rcv
  brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()
  net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it
  ...

Pull more pin control fixes from Linus Walleij:
 "Some late arriving fixes. I should have sent earlier, just swamped
  with work as usual. Thomas patch makes AMD systems usable despite
  firmware bugs so it is fairly important.

   - Make the AMD driver use a regular interrupt rather than a chained
     one, so the system does not lock up.

   - Fix a function call error deep inside the STM32 driver"

* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: Fix bad function call
  pinctrl/amd: Use regular interrupt instead of chained

Pull HID fixes from Jiri Kosina:

 - revert of a commit to magicmouse driver that regressess certain
   devices, from Daniel Stone

 - quirk for a specific Dell mouse, from Sebastian Parschauer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
  HID: Add quirk for Dell PIXART OEM mouse

Pull livepatching fix from Jiri Kosina:
 "Fix the way how livepatches are being stacked with respect to RCU,
  from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
  livepatch: Fix stacking of patches with respect to RCU

Pull more ufs fixes from Al Viro:
 "More UFS fixes, unfortunately including build regression fix for the
  64-bit s_dsize commit. Fixed in this pile:

   - trivial bug in signedness of 32bit timestamps on ufs1

   - ESTALE instead of ufs_error() when doing open-by-fhandle on
     something deleted

   - build regression on 32bit in ufs_new_fragments() - calculating that
     many percents of u64 pulls libgcc stuff on some of those. Mea
     culpa.

   - fix hysteresis loop broken by typo in 2.4.14.7 (right next to the
     location of previous bug).

   - fix the insane limits of said hysteresis loop on filesystems with
     very low percentage of reserved blocks. If it's 5% or less, just
     use the OPTSPACE policy.

   - calculate those limits once and mount time.

  This tree does pass xfstests clean (both ufs1 and ufs2) and it _does_
  survive cross-builds.

  Again, my apologies for missing that, especially since I have noticed
  a related percentage-of-64bit issue in earlier patches (when dealing
  with amount of reserved blocks). Self-LART applied..."

* 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix the logics for tail relocation
  ufs_iget(): fail with -ESTALE on deleted inode
  fix signedness of timestamps on ufs1

Fix expand_upwards() on architectures with an upward-growing stack (parisc,
metag and partly IA-64) to allow the stack to reliably grow exactly up to
the address space limit given by TASK_SIZE.
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of
mmap testing.  That's the VM_BUG_ON(gap_end < gap_start) at the
end of unmapped_area_topdown().  Linus points out how MAP_FIXED
(which does not have to respect our stack guard gap intentions)
could result in gap_end below gap_start there.  Fix that, and
the similar case in its alternative, unmapped_area().

Cc: stable@vger.kernel.org
Fixes: 1be7107f ("mm: larger stack guard gap, between vmas")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If we have shared tags enabled, then every IO completion will trigger
a full loop of every queue belonging to a tag set, and every hardware
queue for each of those queues, even if nothing needs to be done.
This causes a massive performance regression if you have a lot of
shared devices.

Instead of doing this huge full scan on every IO, add an atomic
counter to the main queue that tracks how many hardware queues have
been marked as needing a restart. With that, we can avoid looking for
restartable queues, if we don't have to.

Max reports that this restores performance. Before this patch, 4K
IOPS was limited to 22-23K IOPS. With the patch, we are running at
950-970K IOPS.

Fixes: 6d8c6c0f ("blk-mq: Restart a single queue if tag sets are shared")
Reported-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Andrey reported a lockdep warning on non-initialized
spinlock:

 INFO: trying to register non-static key.
 the code is fine but needs lockdep annotation.
 turning off the locking correctness validator.
 CPU: 1 PID: 4099 Comm: a.out Not tainted 4.12.0-rc6+ #9
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
 Call Trace:
  __dump_stack lib/dump_stack.c:16
  dump_stack+0x292/0x395 lib/dump_stack.c:52
  register_lock_class+0x717/0x1aa0 kernel/locking/lockdep.c:755
  ? 0xffffffffa0000000
  __lock_acquire+0x269/0x3690 kernel/locking/lockdep.c:3255
  lock_acquire+0x22d/0x560 kernel/locking/lockdep.c:3855
  __raw_spin_lock_bh ./include/linux/spinlock_api_smp.h:135
  _raw_spin_lock_bh+0x36/0x50 kernel/locking/spinlock.c:175
  spin_lock_bh ./include/linux/spinlock.h:304
  ip_mc_clear_src+0x27/0x1e0 net/ipv4/igmp.c:2076
  igmpv3_clear_delrec+0xee/0x4f0 net/ipv4/igmp.c:1194
  ip_mc_destroy_dev+0x4e/0x190 net/ipv4/igmp.c:1736

We miss a spin_lock_init() in igmpv3_add_delrec(), probably
because previously we never use it on this code path. Since
we already unlink it from the global mc_tomb list, it is
probably safe not to acquire this spinlock here. It does not
harm to have it although, to avoid conditional locking.

Fixes: c38b7d32 ("igmp: acquire pmc lock for ip_mc_clear_src()")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2017-06-20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.12

Two important fixes for brcmfmac. The rest of the brcmfmac patches are
either code preparation and fixing a new build warning.

brcmfmac

* fix a NULL pointer dereference during resume

* fix a NULL pointer dereference with USB devices, a regression from
  v4.12-rc1
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When having the skb pointer in the first descriptor, stmmac_tx_clean
can get called at a moment where the IP has only cleared the own bit
of the first descriptor, thus freeing the skb, even though there can
be several descriptors whose buffers point into the same skb.

By simply moving the skb pointer from the first descriptor to the last
descriptor, a skb will get freed only when the IP has cleared the
own bit of all the descriptors that are using that skb.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Somehow two copies of the line 'up_write(&vf->efx->filter_sem);' got into
 efx_ef10_sriov_set_vf_vlan().  This would put the mutex in a bad state and
 cause all subsequent down attempts to hang.

Fixes: 671b53ee ("sfc: Ensure down_write(&filter_sem) and up_write() are matched before calling efx_net_open()")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Network interface groups support added while ago, however
there is no IFLA_GROUP attribute description in policy
and netlink message size calculations until now.

Add IFLA_GROUP attribute to the policy.

Fixes: cbda10fa ("net_device: add support for network device groups")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

While commit 73ba57bf ("ipv6: fix backtracking for throw routes")
does good job on error propagation to the fib_rules_lookup()
in fib rules core framework that also corrects throw routes
handling, it does not solve route reference leakage problem
happened when we return -EAGAIN to the fib_rules_lookup()
and leave routing table entry referenced in arg->result.

If rule with matched throw route isn't last matched in the
list we overwrite arg->result losing reference on throw
route stored previously forever.

We also partially revert commit ab997ad4 ("ipv6: fix the
incorrect return value of throw route") since we never return
routing table entry with dst.error == -EAGAIN when
CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point
to check for RTF_REJECT flag since it is always set throw
route.

Fixes: 73ba57bf ("ipv6: fix backtracking for throw routes")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The lan911x family of devices require supplying from 3.3 V power
supplies (connected to VDD_IO, VDD_A and VREG_3.3 pins).  The existing
driver however obtains only VDD_IO and VDD_A regulators in an optional
way so document this in bindings.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Madalin Bucur says:

====================
net: fix loadable module for DPAA Ethernet

The DPAA Ethernet makes use of a symbol that is not exported.
Address the issue by propagating the dma_ops rather than calling
arch_setup_dma_ops().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Remove the use of arch_setup_dma_ops() that was not exported
and was breaking loadable module compilation.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Make sure dma_ops are set, to be later used by the Ethernet driver.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since commit 217f6974 ("net: busy-poll: allow preemption in
sk_busy_loop()") there is an explicit do_softirq() invocation after
local_bh_enable() has been invoked.
I don't understand why we need this because local_bh_enable() will
invoke do_softirq() once the softirq counter reached zero and we have
softirq-related work pending.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

We should avoid marking goto rules unresolved when their
target is actually reachable after rule deletion.

Consolder following sample scenario:

  # ip -4 ru sh
  0:      from all lookup local
  32000:  from all goto 32100
  32100:  from all lookup main
  32100:  from all lookup default
  32766:  from all lookup main
  32767:  from all lookup default

  # ip -4 ru del pref 32100 table main
  # ip -4 ru sh
  0:      from all lookup local
  32000:  from all goto 32100 [unresolved]
  32100:  from all lookup default
  32766:  from all lookup main
  32767:  from all lookup default

After removal of first rule with preference 32100 we
mark all goto rules as unreachable, even when rule with
same preference as removed one still present.

Check if next rule with same preference is available
and make all rules with goto action pointing to it.
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stable/for-jens-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-linus

Pull xen-blkback fixes from Konrad:

"Security and memory leak fixes in xen block driver."

rcu_read_(un)lock(), list_*_rcu(), and synchronize_rcu() are used for a secure
access and manipulation of the list of patches that modify the same function.
In particular, it is the variable func_stack that is accessible from the ftrace
handler via struct ftrace_ops and klp_ops.

Of course, it synchronizes also some states of the patch on the top of the
stack, e.g. func->transition in klp_ftrace_handler.

At the same time, this mechanism guards also the manipulation of
task->patch_state. It is modified according to the state of the transition and
the state of the process.

Now, all this works well as long as RCU works well. Sadly livepatching might
get into some corner cases when this is not true. For example, RCU is not
watching when rcu_read_lock() is taken in idle threads.  It is because they
might sleep and prevent reaching the grace period for too long.

There are ways how to make RCU watching even in idle threads, see
rcu_irq_enter(). But there is a small location inside RCU infrastructure when
even this does not work.

This small problematic location can be detected either before calling
rcu_irq_enter() by rcu_irq_enter_disabled() or later by rcu_is_watching().
Sadly, there is no safe way how to handle it.  Once we detect that RCU was not
watching, we might see inconsistent state of the function stack and the related
variables in klp_ftrace_handler(). Then we could do a wrong decision, use an
incompatible implementation of the function and break the consistency of the
system. We could warn but we could not avoid the damage.

Fortunately, ftrace has similar problems and they seem to be solved well there.
It uses a heavy weight implementation of some RCU operations. In particular, it
replaces:

  + rcu_read_lock() with preempt_disable_notrace()
  + rcu_read_unlock() with preempt_enable_notrace()
  + synchronize_rcu() with schedule_on_each_cpu(sync_work)

My understanding is that this is RCU implementation from a stone age. It meets
the core RCU requirements but it is rather ineffective. Especially, it does not
allow to batch or speed up the synchronize calls.

On the other hand, it is very trivial. It allows to safely trace and/or
livepatch even the RCU core infrastructure.  And the effectiveness is a not a
big issue because using ftrace or livepatches on productive systems is a rare
operation.  The safety is much more important than a negligible extra load.

Note that the alternative implementation follows the RCU principles. Therefore,
     we could and actually must use list_*_rcu() variants when manipulating the
     func_stack.  These functions allow to access the pointers in the right
     order and with the right barriers. But they do not use any other
     information that would be set only by rcu_read_lock().

Also note that there are actually two problems solved in ftrace:

First, it cares about the consistency of RCU read sections.  It is being solved
the way as described and used in this patch.

Second, ftrace needs to make sure that nobody is inside the dynamic trampoline
when it is being freed. For this, it also calls synchronize_rcu_tasks() in
preemptive kernel in ftrace_shutdown().

Livepatch has similar problem but it is solved by ftrace for free.
klp_ftrace_handler() is a good guy and never sleeps. In addition, it is
registered with FTRACE_OPS_FL_DYNAMIC. It causes that
unregister_ftrace_function() calls:

	* schedule_on_each_cpu(ftrace_sync) - always
	* synchronize_rcu_tasks() - in preemptive kernel

The effect is that nobody is neither inside the dynamic trampoline nor inside
the ftrace handler after unregister_ftrace_function() returns.

[jkosina@suse.cz: reformat changelog, fix comment]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Setting these bits causes libinput to fail to initialize the device;
setting BTN_TOUCH and BTN_TOOL_FINGER causes it to treat the mouse as a
touchpad, and it then refuses to continue when it discovers ABS_X is not
set.

This breaks all known Wayland compositors, as well as Xorg when the
libinput driver is being used.

This reverts commit f4b65b95.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Che-Liang Chiou <clchiou@chromium.org>
Cc: Thierry Escande <thierry.escande@collabora.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull clk fixes from Stephen Boyd:
 "One build fix for an Amlogic clk driver and a handful of Allwinner clk
  driver fixes for some DT bindings and a randconfig build error that
  all came in this merge window"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM
  clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM
  dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks
  clk: sunxi-ng: sun5i: Fix ahb_bist_clk definition
  clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM
  clk: meson: gxbb: fix build error without RESET_CONTROLLER
  clk: sunxi-ng: v3s: Fix usb otg device reset bit
  clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset

Pull NTB fixes from Jon Mason:
 "NTB bug fixes to address the modinfo in ntb_perf, a couple of bugs in
  the NTB transport QP calculations, skx doorbells, and sleeping in
  ntb_async_tx_submit"

* tag 'ntb-4.12-bugfixes' of git://github.com/jonmason/ntb:
  ntb: no sleep in ntb_async_tx_submit
  ntb: ntb_hw_intel: Skylake doorbells should be 32bits, not 64bits
  ntb_transport: fix bug calculating num_qps_mw
  ntb_transport: fix qp count bug
  NTB: ntb_test: fix bug printing ntb_perf results
  ntb: Correct modinfo usage statement for ntb_perf

Now before dumping a sock in sctp_diag, it only holds the sock while
the ep may be already destroyed. It can cause a use-after-free panic
when accessing ep->asocs.

This patch is to set sctp_sk(sk)->ep NULL in sctp_endpoint_destroy,
and check if this ep is already destroyed before dumping this ep.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdrver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Do not sleep in ntb_async_tx_submit, which could deadlock.
This reverts commit "8c874cc1"

Fixes: 8c874cc1 ("NTB: Address out of DMA descriptor issue with NTB")
Reported-by: Jia-Ju Bai <baijiaju1990@163.com>
Signed-off-by: Allen Hubbe <Allen.Hubbe@dell.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

Fixing doorbell register length to 32bits per spec. On Skylake NTB, the
doorbell registers are 32bit write only registers. The source for the
doorbell is a 64bit register that shows the interrupt bits.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 783dfa6c ("ntb: Adding Skylake Xeon NTB support")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

A divide by zero error occurs if qp_count is less than mw_count because
num_qps_mw is calculated to be zero. The calculation appears to be
incorrect.

The requirement is for num_qps_mw to be set to qp_count / mw_count
with any remainder divided among the earlier mws.

For example, if mw_count is 5 and qp_count is 12 then mws 0 and 1
will have 3 qps per window and mws 2 through 4 will have 2 qps per window.
Thus, when mw_num < qp_count % mw_count, num_qps_mw is 1 higher
than when mw_num >= qp_count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

In cases where there are more mw's than spads/2-2, the mw count gets
reduced to match the limitation. ntb_transport also tries to ensure that
there are fewer qps than mws but uses the full mw count instead of
the reduced one. When this happens, the math in
'ntb_transport_setup_qp_mw' will get confused and result in a kernel
paging request bug.

This patch fixes the bug by reducing qp_count to the reduced mw count
instead of the full mw count.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

The code mistakenly prints the local perf results for the remote test
so the script reports identical results for both directions. Fix this
by ensuring we print the remote result.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: a9c59ef7 ("ntb_test: Add a selftest script for the NTB subsystem")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

The order parameters are powers of 2; adjust the usage information
to use correct mathematical representations.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Fixes: 8a7b6a77 ("ntb: ntb perf tool")
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>

This patch fixes the phy loopback self_test failed issue. when
Marvell Phy Module is loaded, it will powerdown fiber when doing
phy loopback self test, which cause phy loopback self_test fail.
Signed-off-by: Lin Yun Sheng <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The register_vlan_device would invoke free_netdev directly, when
register_vlan_dev failed. It would trigger the BUG_ON in free_netdev
if the dev was already registered. In this case, the netdev would be
freed in netdev_run_todo later.

So add one condition check now. Only when dev is not registered, then
free it directly.

The following is the part coredump when netdev_upper_dev_link failed
in register_vlan_dev. I removed the lines which are too long.

[  411.237457] ------------[ cut here ]------------
[  411.237458] kernel BUG at net/core/dev.c:7998!
[  411.237484] invalid opcode: 0000 [#1] SMP
[  411.237705]  [last unloaded: 8021q]
[  411.237718] CPU: 1 PID: 12845 Comm: vconfig Tainted: G            E   4.12.0-rc5+ #6
[  411.237737] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015
[  411.237764] task: ffff9cbeb6685580 task.stack: ffffa7d2807d8000
[  411.237782] RIP: 0010:free_netdev+0x116/0x120
[  411.237794] RSP: 0018:ffffa7d2807dbdb0 EFLAGS: 00010297
[  411.237808] RAX: 0000000000000002 RBX: ffff9cbeb6ba8fd8 RCX: 0000000000001878
[  411.237826] RDX: 0000000000000001 RSI: 0000000000000282 RDI: 0000000000000000
[  411.237844] RBP: ffffa7d2807dbdc8 R08: 0002986100029841 R09: 0002982100029801
[  411.237861] R10: 0004000100029980 R11: 0004000100029980 R12: ffff9cbeb6ba9000
[  411.238761] R13: ffff9cbeb6ba9060 R14: ffff9cbe60f1a000 R15: ffff9cbeb6ba9000
[  411.239518] FS:  00007fb690d81700(0000) GS:ffff9cbebb640000(0000) knlGS:0000000000000000
[  411.239949] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  411.240454] CR2: 00007f7115624000 CR3: 0000000077cdf000 CR4: 00000000003406e0
[  411.240936] Call Trace:
[  411.241462]  vlan_ioctl_handler+0x3f1/0x400 [8021q]
[  411.241910]  sock_ioctl+0x18b/0x2c0
[  411.242394]  do_vfs_ioctl+0xa1/0x5d0
[  411.242853]  ? sock_alloc_file+0xa6/0x130
[  411.243465]  SyS_ioctl+0x79/0x90
[  411.243900]  entry_SYSCALL_64_fastpath+0x1e/0xa9
[  411.244425] RIP: 0033:0x7fb69089a357
[  411.244863] RSP: 002b:00007ffcd04e0fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[  411.245445] RAX: ffffffffffffffda RBX: 00007ffcd04e2884 RCX: 00007fb69089a357
[  411.245903] RDX: 00007ffcd04e0fd0 RSI: 0000000000008983 RDI: 0000000000000003
[  411.246527] RBP: 00007ffcd04e0fd0 R08: 0000000000000000 R09: 1999999999999999
[  411.246976] R10: 000000000000053f R11: 0000000000000202 R12: 0000000000000004
[  411.247414] R13: 00007ffcd04e1128 R14: 00007ffcd04e2888 R15: 0000000000000001
[  411.249129] RIP: free_netdev+0x116/0x120 RSP: ffffa7d2807dbdb0
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During the module initialisation there is a possible race
(basically race between uld and lld) where neither the uld
nor lld notifies the uP about where to route the ctrl queue
completions. LLD skips notifying uP as the rdma queues were
not created by then (will leave it to ULD to notify the uP).
As the ULD comes up, it also skips notifying the uP as the
flag FULL_INIT_DONE is not set yet (ULD assumes that the
interface is not up yet).

Consequently, this race between uld and lld leaves uP
unnotified about where to send the ctrl queue completions
to, leading to iwarp RI_RES WR failure.

Here is the race:

CPU 0                                   CPU1

- allocates nic rx queus
- t4_sge_alloc_ctrl_txq()
(if rdma rsp queues exists,
tell uP to route ctrl queue
compl to rdma rspq)
                                - acquires the mutex_lock
                                - allocates rdma response queues
                                - if FULL_INIT_DONE set,
                                  tell uP to route ctrl queue compl
                                  to rdma rspq
                                - relinquishes mutex_lock
- acquires the mutex_lock
- enable_rx()
- set FULL_INIT_DONE
- relinquishes mutex_lock

This patch fixes the above issue.

Fixes: e7519f99('cxgb4: avoid enabling napi twice to the same queue')
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
CC: Stable <stable@vger.kernel.org> # 4.9+
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Stack guard page is a useful feature to reduce a risk of stack smashing
into a different mapping. We have been using a single page gap which
is sufficient to prevent having stack adjacent to a different mapping.
But this seems to be insufficient in the light of the stack usage in
userspace. E.g. glibc uses as large as 64kB alloca() in many commonly
used functions. Others use constructs liks gid_t buffer[NGROUPS_MAX]
which is 256kB or stack strings with MAX_ARG_STRLEN.

This will become especially dangerous for suid binaries and the default
no limit for the stack size limit because those applications can be
tricked to consume a large portion of the stack and a single glibc call
could jump over the guard page. These attacks are not theoretical,
unfortunatelly.

Make those attacks less probable by increasing the stack guard gap
to 1MB (on systems with 4k pages; but make it depend on the page size
because systems with larger base pages might cap stack allocations in
the PAGE_SIZE units) which should cover larger alloca() and VLA stack
allocations. It is obviously not a full fix because the problem is
somehow inherent, but it should reduce attack space a lot.

One could argue that the gap size should be configurable from userspace,
but that can be done later when somebody finds that the new 1MB is wrong
for some special case applications.  For now, add a kernel command line
option (stack_guard_gap) to specify the stack gap size (in page units).

Implementation wise, first delete all the old code for stack guard page:
because although we could get away with accounting one extra page in a
stack vma, accounting a larger gap can break userspace - case in point,
a program run with "ulimit -S -v 20000" failed when the 1MB gap was
counted for RLIMIT_AS; similar problems could come with RLIMIT_MLOCK
and strict non-overcommit mode.

Instead of keeping gap inside the stack vma, maintain the stack guard
gap as a gap between vmas: using vm_start_gap() in place of vm_start
(or vm_end_gap() in place of vm_end if VM_GROWSUP) in just those few
places which need to respect the gap - mainly arch_get_unmapped_area(),
and and the vma tree's subtree_gap support for that.
Original-patch-by: Oleg Nesterov <oleg@redhat.com>
Original-patch-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SoC fixes from Olof Johansson:
 "Stream of fixes has slowed down, only a few this week:

   - Some DT fixes for Allwinner platforms, and addition of a clock to
     the R_CCU clock controller that had been missed.

   - A couple of small DT fixes for am335x-sl50"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: allwinner: a64: Add PLL_PERIPH0 clock to the R_CCU
  ARM: sunxi: h3-h5: Add PLL_PERIPH0 clock to the R_CCU
  ARM: dts: am335x-sl50: Fix cannot claim requested pins for spi0
  ARM: dts: am335x-sl50: Fix card detect pin for mmc1
  arm64: allwinner: h5: Remove syslink to shared DTSI
  ARM: sunxi: h3/h5: fix the compatible of R_CCU