- 02 Nov, 2018 8 commits
-
-
Jani Nikula authored
Try to make it slightly less of an eye sore. No functional changes. Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com
-
Jani Nikula authored
Minor semantic nit, no functional changes. Reviewed-by:
-
Jani Nikula authored
The device info offset arrays for unevenly spaced register offsets is great for widely used registers. However, the palette registers are only used in one function, i9xx_load_luts_internal(), and only for GMCH platforms, wasting device info. Replace palette_offsets with _PICK() in palette register definition. While the use of _PICK() does not check for pipe C existence, neither does the current offset array usage, and leads to bogus address when pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads to a sensible register offset, just non-existing on non-CHV. Either way, this shouldn't happen anyway. Remove unused old palette macros while at it. Bloat-o-meter results below for completeness. add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184) Function old new delta i9xx_load_luts_internal 394 483 +89 i915_driver_load 5103 5107 +4 g4x_pre_enable_dp 378 379 +1 intel_engines_init_mmio 1117 1116 -1 intel_engine_lookup_user 47 46 -1 hdmi_port_clock_valid 310 309 -1 gen11_irq_handler 707 706 -1 intel_device_info_dump_runtime 329 311 -18 intel_device_info_runtime_init 5166 4910 -256 Total: Before=918650, After=918466, chg -0.02% add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576) Data old new delta intel_valleyview_info 200 188 -12 intel_skylake_gt4_info 200 188 -12 intel_skylake_gt3_info 200 188 -12 intel_skylake_gt2_info 200 188 -12 intel_skylake_gt1_info 200 188 -12 intel_sandybridge_m_gt2_info 200 188 -12 intel_sandybridge_m_gt1_info 200 188 -12 intel_sandybridge_d_gt2_info 200 188 -12 intel_sandybridge_d_gt1_info 200 188 -12 intel_pineview_info 200 188 -12 intel_kabylake_gt3_info 200 188 -12 intel_kabylake_gt2_info 200 188 -12 intel_kabylake_gt1_info 200 188 -12 intel_ivybridge_q_info 200 188 -12 intel_ivybridge_m_gt2_info 200 188 -12 intel_ivybridge_m_gt1_info 200 188 -12 intel_ivybridge_d_gt2_info 200 188 -12 intel_ivybridge_d_gt1_info 200 188 -12 intel_ironlake_m_info 200 188 -12 intel_ironlake_d_info 200 188 -12 intel_icelake_11_info 200 188 -12 intel_i965gm_info 200 188 -12 intel_i965g_info 200 188 -12 intel_i945gm_info 200 188 -12 intel_i945g_info 200 188 -12 intel_i915gm_info 200 188 -12 intel_i915g_info 200 188 -12 intel_i865g_info 200 188 -12 intel_i85x_info 200 188 -12 intel_i845g_info 200 188 -12 intel_i830_info 200 188 -12 intel_haswell_gt3_info 200 188 -12 intel_haswell_gt2_info 200 188 -12 intel_haswell_gt1_info 200 188 -12 intel_gm45_info 200 188 -12 intel_geminilake_info 200 188 -12 intel_g45_info 200 188 -12 intel_g33_info 200 188 -12 intel_coffeelake_gt3_info 200 188 -12 intel_coffeelake_gt2_info 200 188 -12 intel_coffeelake_gt1_info 200 188 -12 intel_cherryview_info 200 188 -12 intel_cannonlake_info 200 188 -12 intel_broxton_info 200 188 -12 intel_broadwell_rsvd_info 200 188 -12 intel_broadwell_gt3_info 200 188 -12 intel_broadwell_gt2_info 200 188 -12 intel_broadwell_gt1_info 200 188 -12 Total: Before=195529, After=194953, chg -0.29% Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Although there's nothing crucial missing, it's been a long time since the last backmerge. Catch up with drm-next. Signed-off-by: -
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-10-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix to avoid link retraining workaround on eDP (the other is a comment change) Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181025131836.GA2296@jlahtine-desk.ger.corp.intel.com
-
Anusha Srivatsa authored
This patch fixes the naming of the registers: s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL And also fix the hex values to lower case, to match rest of the definitions. Manasi noticed this with the patch that was merged. v2: fix "Fixes" tag. Fixes: 8b1b558d ("drm/i915/icl: Add DSS_CTL Registers") Suggested-by:
Manasi Navare <manasi.d.navare@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
- Fix flickering at low backlight levels on some systems - Fix some overclocking regressions - Vega20 updates for - GPU recovery fixes - Disable gfxoff on RV as some sbios/fw combinations are not stable yet Signed-off-by:
-
Dave Airlie authored
Merge tag 'drm-misc-next-fixes-2018-10-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next - Properly label Innolux TV123WAM as P120ZDG-BF1 (Doug) - Add optional delay for panels without hpd hooked up (which solves the mystery delay for TI SN65DSI86 bridge) (Doug) - Another 6bpc quirk for BOE panel 0x0771 (Shawn) Cc: Doug Anderson <dianders@chromium.org> Cc: Lee, Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
- 01 Nov, 2018 27 commits
-
-
Imre Deak authored
BIOS can leave the PLL to port mapping enabled, even if the corresponding encoder is disabled. Disable the port mapping in this case. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-9-imre.deak@intel.com
-
Imre Deak authored
Most of the AUX_CH_CTL flags are concerned with DP AUX transfer parameters. As opposed to this the flag specifying the thunderbolt vs. non-thunderbolt mode of the port is not related to AUX transfers at all (rather it's repurposed to enable either TBT or non-TBT PHY HW blocks). The programming has to be done before enabling the corresponding AUX power well, so make it part of the power well code. v3: - Use existing enable/disable helpers instead of opencoding. (Jose) - Fix type of is_tc_tbt to remain a bitfield. (Lucas) - Add comment describing the is_tc_tbt power well flag. (Lucas) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108548 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Imre Deak authored
DDI/TypeC ports need the AUX power domain for main link functionality even when they operate in HDMI static mode, so enable the power domain for these ports too. v4: - Rebase on the upstream ICL pre_pll_enable change. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Imre Deak authored
For DDI/TypeC ports the AUX power domain needs to be enabled before the port's PLL is enabled, so move the enabling earlier accordingly. v2: - Preserve the pre_pll hook for GEN9_LP. (Ville) v3: - Add related BSpec entries to commit log. (Jose) v4: - Rebase on the upstream ICL pre_pll_enable change. BSpec: 21750, 22243 Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Imre Deak authored
From ICL onwards the AUX power domain may change dynamically based on whether a DDI/TypeC port is in thunderbolt or non-thunderbolt mode, so use a helper function instead of a static field to get the current domain. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Imre Deak authored
From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to know which AUX CH belongs to them, so initialize aux_ch for those ports too. For consistency do this for all HDMI ports, not only for DDI/TypeC ones. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Imre Deak authored
From ICL onwards all DDI/TypeC ports - even working in HDMI mode - need to know their corresponding AUX CH, so move the field to a common struct. No functional change. v3: - Add code comment about which ports aux_ch is used for. (Jose) Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Imre Deak authored
From ICL onwards all the DDI/TypeC ports - even working in HDMI mode - need to know their corresponding AUX channel, so move the corresponding helper to a common place. No functional change. v4: - Fix 'no space is necessary after a cast' checkpatch warn. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Oscar Mateo authored
Required for Bindless samplers. Userspace consumer: mesa V2: Rebase V3: Update commit message Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Reviewed-by:
-
Oscar Mateo authored
Required to dinamically set 'Trilinear Filter Quality Mode' Userpsace consumer is mesa. V2: Rebase V3: Update commit message Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Display WA_1405510057 asks to not enable YUV 420 HDMI 10bpc when horizontal blank size mod 8 reminder is 2. V2: Rebase(r-b: Anusha) V3: crtc_state->s/ycbcr420/output_format/ Cc: Anusha Srivatsa <anusha.srivatsa@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Radhakrishna Sripada authored
Gen11 Display suports 32 planes in total. Enable the new format in context status to be used and expanded to 32 planes. V2: Move the WA to display WA's(Chris) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Reviewed-by:
-
Rodrigo Vivi authored
CNL A stepping was the only affected there. But also it is time to clean old pre-production CNL Workarounds, so let's just remove and clean this W/A. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
Clint Taylor <Clinton.A.Taylor@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-4-rodrigo.vivi@intel.com
-
Rodrigo Vivi authored
Let's introduce the WA number that is the cause of having NV12 disabled on both SLK and BXT. According to Spec: WA 0870: "Display flickers with NV12 video playback in Y tiling mode. WA: Use YUV422 surface format instead of NV12." v2: remove the useless dead code and consequently avoiding device info flag. (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Rodrigo Vivi authored
According to BSpec this is not needed anymore: "This workaround is no longer needed since NV12 support is dropped for the affected projects. " Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Rodrigo Vivi authored
First of all I believe this WA as written here was wrong. Because it is listed on BSpec only for SKL and BXT, exactly the only 2 platforms skipped here. But also it is written there that we don't need this WA anymore: "This workaround is no longer needed since NV12 support is dropped for the affected projects in #0870." SO, let's kill it. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Vidya Srinivas <vidya.srinivas@intel.com> Signed-off-by:
-
Anusha Srivatsa authored
Add missing block that takes care of inline intel_suspend_complete for DC9 on ICL. Daniele noticed this was part of original patch but missed on on merged commit ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off"). Fixes: 3e68928b ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off") Cc: Imre Deak <imre.deak@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: -
Anusha Srivatsa authored
Add defines for DSS_CTL registers. These registers specify the big joiner, splitter, overlap pixels and info regarding compression enabled on left or right branch. v2: - rebase. Remove overlapping defines(James Ausmus) - Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi) - take pixels as an argument for overlap.(Manasi) v3: - rebase. merge DSS_CTL1/2 introduced in Madhav's patch to avoid confusion (madhav chauhan) - Rename registers in accordance to BSpec (Madhav, Rodrigo) - Add define to conditionally check the buffer target depth (James Ausmus) v4: - remove redundant definitions.(madhav) v5: - Add mask for overlap pixels. - Code Style changes.(Madhav) v6: - Code style changes. (Madhav) Suggested-by:
Madhav Chauhan <madhav.chauhan@intel.com> Cc: Madhav Chauhan <madhav.chauhan@intel.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: James Ausmus <james.ausmus@intel.com> Cc: Gaurav Singh <gaurav.k.singh@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Christian König authored
This is still completely breaking my Raven system. This reverts commit cdf2f910fa969adca1b0e3ad2b487821233dc038. Revert until we sort out the sbios and firmware combinations that work correctly. bug: https://bugs.freedesktop.org/show_bug.cgi?id=108606 Cc: stable@vger.kernel.org # v4.19 Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Rex Zhu authored
print warning in dmesg to notify user the setting for sclk_od/mclk_od out of range that vbios can support Reviewed-by:
Rex Zhu <Rex.Zhu@amd.com> Signed-off-by:
-
Rex Zhu authored
not update dpm table with user's setting. Reviewed-by:
-
Rex Zhu authored
not update the dpm table with user's setting Acked-by:
-
Evan Quan authored
As MGPU fan boost feature will be definitely not needed when DPM is disabled. So, there is no need to error out. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Andrey Grodzovsky authored
Problem: During GPU recover DAL would hang in amdgpu_pm_compute_clocks->amdgpu_fence_wait_empty Fix: Turns out there was a typo introduced by 3320b8d2 drm/amdgpu: remove job->ring which caused skipping amdgpu_fence_driver_force_completion and so the hangged job was never force signaled and this would cause the hang later in DAL. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by:
-
Madhav Chauhan authored
For Gen11 DSI, we don't need to wait for getting DSI FIFO empty after sending DCS commands. Signed-off-by:
-
Madhav Chauhan authored
This patch detects DSI presence for ICL platform by reading VBT. DSI detection is done while initializing DSI using newly added function intel_gen11_dsi_init. v2 by Jani: - Preserve old behavour of intel_bios_is_dsi_present() - s/intel_gen11_dsi_init/icl_dsi_init/g Signed-off-by:
-
Madhav Chauhan authored
This patch defines payload/header registers for each DSI transcoder used for transmitting DSI packets. v2 by Jani: - Drop full register mask and shift for payload - Use lower case for hex 0x Signed-off-by:
-
- 31 Oct, 2018 5 commits
-
-
Manasi Navare authored
In case of Legacy DP connector on TypeC port, the flex IO DPMLE register is set to number of lanes configured by the display driver which will be programmed into DDI_BUF_CTL PORT_WIDTH_SELECTION. This needs to be programmed before enabling the shared PLLs hence add a pre_pll_enable hook for ICL and add this programming in that hook. v2: * Remove the check for combophy port (Jose) * Simplify the port reversal check logic (Jose) Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Manasi Navare authored
This patch fixes the macros used for defining the DFLEXDPMLE register bit fields. This accounts for changes in the spec. Fixes: a2bc69a1 ("drm/i915/icl: Add register definition for DFLEXDPMLE") Cc: Animesh Manna <animesh.manna@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
-
José Roberto de Souza authored
enc_to_dig_port() returns NULL for encoders of type INTEL_OUTPUT_DP_MST causing the crash bellow: [ 2832.836101] BUG: unable to handle kernel paging request at 00000000000012b8 [ 2832.843062] PGD 0 P4D 0 [ 2832.845610] Oops: 0000 [#1] SMP [ 2832.848764] CPU: 2 PID: 3577 Comm: kworker/2:0 Tainted: G W 4.19.0-rc7+ #491 [ 2832.857106] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2352.A01.1808281852 08/28/2018 [ 2832.870734] Workqueue: events output_poll_execute [ 2832.875480] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915] [ 2832.880449] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00 [ 2832.899176] RSP: 0018:ffffc90001b57a78 EFLAGS: 00010293 [ 2832.904404] RAX: 0000000000000000 RBX: ffffc90001b57a94 RCX: 0000000000083d60 [ 2832.911536] RDX: 0000000000000000 RSI: ffff8804a8c0dc00 RDI: ffffc90001b57b18 [ 2832.918668] RBP: 0000000000000003 R08: ffff8804a8c1f990 R09: ffff8804a8c1f990 [ 2832.925797] R10: 0000000000000000 R11: ffff8804a8e99600 R12: ffff8804a7760000 [ 2832.932930] R13: ffff88049e94d000 R14: ffff88049e94d000 R15: 000000000000000e [ 2832.940063] FS: 0000000000000000(0000) GS:ffff8804b0300000(0000) knlGS:0000000000000000 [ 2832.948147] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2832.953893] CR2: 00000000000012b8 CR3: 0000000004a1d004 CR4: 0000000000760ee0 [ 2832.961027] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2832.968155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2832.975286] PKRU: 55555554 [ 2832.978003] Call Trace: [ 2832.980496] haswell_crtc_compute_clock+0x3d/0x68 [i915] [ 2832.985841] intel_crtc_atomic_check+0x61/0x340 [i915] [ 2832.990987] drm_atomic_helper_check_planes+0x130/0x1c0 [ 2832.996245] intel_atomic_check+0x4d5/0x10f0 [i915] [ 2833.001147] drm_atomic_check_only+0x484/0x690 [ 2833.005629] drm_atomic_commit+0x13/0x50 [ 2833.009564] restore_fbdev_mode_atomic+0x1c9/0x1e0 [ 2833.014363] drm_fb_helper_restore_fbdev_mode_unlocked+0x47/0x90 [ 2833.020368] drm_fb_helper_set_par+0x29/0x50 [ 2833.024641] drm_fb_helper_hotplug_event.part.33+0x92/0xb0 [ 2833.030130] drm_kms_helper_hotplug_event+0x26/0x30 [ 2833.035013] output_poll_execute+0x192/0x1b0 [ 2833.039293] process_one_work+0x2a5/0x5f0 [ 2833.043315] worker_thread+0x2d/0x3d0 [ 2833.046988] ? rescuer_thread+0x340/0x340 [ 2833.051009] kthread+0x112/0x130 [ 2833.054247] ? kthread_create_worker_on_cpu+0x70/0x70 [ 2833.059307] ret_from_fork+0x3a/0x50 [ 2833.062893] Modules linked in: i915 prime_numbers snd_hda_codec_realtek snd_hda_codec_generic asix snd_usb_audio snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi cdc_ether usbnet x86_pkg_temp_thermal xhci_pci xhci_hcd ucsi_acpi typec_ucsi typec efivarfs [last unloaded: prime_numbers] [ 2833.088917] CR2: 00000000000012b8 [ 2833.092241] ---[ end trace 25f9fe3d47af2e75 ]--- [ 2833.096895] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915] [ 2833.101866] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00 [ 2833.120589] RSP: 0018:ffffc90001b57a78 EFLAGS: 00010293 [ 2833.125815] RAX: 0000000000000000 RBX: ffffc90001b57a94 RCX: 0000000000083d60 [ 2833.132946] RDX: 0000000000000000 RSI: ffff8804a8c0dc00 RDI: ffffc90001b57b18 [ 2833.140080] RBP: 0000000000000003 R08: ffff8804a8c1f990 R09: ffff8804a8c1f990 [ 2833.147213] R10: 0000000000000000 R11: ffff8804a8e99600 R12: ffff8804a7760000 [ 2833.154350] R13: ffff88049e94d000 R14: ffff88049e94d000 R15: 000000000000000e [ 2833.161483] FS: 0000000000000000(0000) GS:ffff8804b0300000(0000) knlGS:0000000000000000 [ 2833.169565] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2833.175313] CR2: 00000000000012b8 CR3: 0000000004a1d004 CR4: 0000000000760ee0 [ 2833.182449] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2833.189578] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 2833.196712] PKRU: 55555554 MST ports are allocated from struct intel_dp_mst_encoder not from struct intel_digital_port as regular ports, so to get the TC type it is necessary check the primary digital port of the mst encoder. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
José Roberto de Souza authored
It is only used by eDP ports so no need to initialize it for each DP port. Reviewed-by:
-
José Roberto de Souza authored
Otherwise it would be in a inconsistent state as port is disconnected but with a valid tc type. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
-
