- 21 Mar, 2019 17 commits
-
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jun Lei authored
[why] There exist displays with EDIDs > 512 bytes, existing code will cause us to ignore all extension blocks. Signed-off-by:
Jun Lei <Jun.Lei@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
-
Wesley Chalmers authored
Audio was unmuted for HDMI only, need to do so for DP as well. Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Eric Bernstein <Eric.Bernstein@amd.com> Acked-by:
-
Aric Cyr authored
[Why] Flickering is observed on some displays when the number of inserted BTR frames changes frequently. [How] Add in a margin of drift to prevent the inserted number of frames from jumping around too frequently. Signed-off-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
-
Charlene Liu authored
[Description] when programming VID_TIMING, we were using the original VESA timing for DP_VIDM/N. for YCbCr420 or compressed YCbCr422, using half rate as YCbCr444. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
Nikola Cornij <Nikola.Cornij@amd.com> Acked-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Eric Bernstein authored
[Why] Need to set VID_N_MUL for 4:2:0 cases [How] Move setting to enc1_stream_encoder_dp_unblank and ensure it is also set for non-4:2:0 cases. Signed-off-by:
-
Yongqiang Sun authored
Move out of header to dc_helper.c, in preparation for future implementations. Signed-off-by:
Yongqiang Sun <yongqiang.sun@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] To help prevent plane state not being set to the correct default value if any new properties are added in the future. [How] Use the drm helper - which seems to be the common solution among other DRM drivers. Signed-off-by:
-
Yongqiang Sun authored
we were only checking the return value in one place, thus changing generic_reg_wait from int to void and reading the register instead of getting it from generic_reg_wait, when we need the return value. Signed-off-by:
-
Nicholas Kazlauskas authored
[Why] The plane_reset callback is subclassed but hasn't been updated since the drm helper got updated to include resetting alpha related state (state->alpha and state->pixel_blend_mode). The overlay planes exposed by amdgpu_dm were therefore being rendered as invisible by default ever since supported was exposed for alpha blending properties on overlays. This caused regressions in igt@kms_plane_multiple@atomic-tiling-none and igt@kms_plane@plane-position-covered-pipe tests. [How] Reset the plane state values to their correct values as defined in the drm helper. This fixes the IGT test regression. Signed-off-by:
Harry Wentland <Harry.Wentland@amd.com> Acked-by:
-
Christian König authored
To aid recoverable page faults. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Christian König authored
We need the first paging queue to handle page faults. v2: handle any number of SDMA instances gracefully Signed-off-by:
-
Christian König authored
Now that we have re-reoute faults to the other IH ring we can enable retries again. Signed-off-by:
-
Wentao Lou authored
add amdgpu_amdkfd_pre_reset and amdgpu_amdkfd_post_reset inside amdgpu_device_reset_sriov. Signed-off-by:
Wentao Lou <Wentao.Lou@amd.com> Acked-by:
-
Nicholas Kazlauskas authored
[Why] Incorrect hardcoded assumptions are made regarding luma and chroma alignment. The actual values set for the DRM framebuffer should be used when programming the address. [How] Respect the given pitch for both luma and chroma planes - it's not like we can force the alignment to anything else at this point anyway. Use the FB offset for the chroma planes directly. DRM already provides this to us so there's no need to calculate it manually. While we don't actually use the chroma surface size parameters on Raven, these should have technically been fb->width / 2 and fb->height / 2 since the chroma plane is half size of the luma plane for NV12. Leave a TODO indicating that those should be set based on the actual surface format instead since this is only correct for YUV420 formats. Signed-off-by:
-
Felix Kuehling authored
When page table are updated by the CPU, synchronize with the allocation and initialization of newly allocated page tables. Signed-off-by:
-
Philip Yang authored
If using old kernel config file, CONFIG_ZONE_DEVICE is not selected, so CONFIG_HMM and CONFIG_HMM_MIRROR is not enabled, the current driver error message "Failed to register MMU notifier" is not clear. Inform user with more descriptive message on how to fix the missing kernel config option. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=109808Signed-off-by:
Philip Yang <Philip.Yang@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
- 19 Mar, 2019 23 commits
-
-
Philip Yang authored
userptr may cross two VMAs if the forked child process (not call exec after fork) malloc buffer, then free it, and then malloc larger size buf, kerenl will create new VMA adjacent to old VMA which was cloned from parent process, some pages of userptr are in the first VMA, the rest pages are in the second VMA. HMM expects range only have one VMA, loop over all VMAs in the address range, create multiple ranges to handle this case. See is_mergeable_anon_vma in mm/mmap.c for details. Signed-off-by:
-
Philip Yang authored
Userptr restore may have concurrent userptr invalidation after hmm_vma_fault adds the range to the hmm->ranges list, needs call hmm_vma_range_done to remove the range from hmm->ranges list first, then reschedule the restore worker. Otherwise hmm_vma_fault will add same range to the list, this will cause loop in the list because range->next point to range itself. Add function untrack_invalid_user_pages to reduce code duplication. Signed-off-by:
-
Christian König authored
Otherwise we won't be able to cleanly handle page faults. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Signed-off-by:
-
Christian König authored
Make sure that not only the entities are flush, but that we also wait for the HW to finish all processing. Signed-off-by:
-
Christian König authored
It's a bug having a dead pointer in the IDR, silently returning is the worst we can do. Signed-off-by:
-
Christian König authored
Remove the chash implementation for now since it isn't used any more. Signed-off-by:
-
Christian König authored
Further testing showed that the idea with the chash doesn't work as expected. Especially we can't predict when we can remove the entries from the hash again. So replace the chash with a ring buffer/hash mix where entries in the container age automatically based on their timestamp. v2: use ring buffer / hash mix v3: check the timeout to make sure all entries age Signed-off-by:
-
Christian König authored
Only process a maximum of 32 IVs before writing back the RPTR. This improves hw handling when we get close to an overflow in the ring buffer. Signed-off-by:
-
Christian König authored
That doesn't seem to have any negative effects. Signed-off-by:
-
Christian König authored
The doorbells should already be reserved, just enable them. Signed-off-by:
-
Christian König authored
Disable overflow and enable full drain. This makes fault handling on ring 1 much more reliable since we don't generate back pressure any more. Signed-off-by:
-
Nicholas Kazlauskas authored
The buffers should be cleared when possible but we also don't want buffer creation to fail in the rare case where the ring isn't ready during the call. This could happen during some suspend/resume sequences. Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Signed-off-by:
-
Nicholas Kazlauskas authored
The dumb_create API isn't intended for high performance rendering and it's more useful for userspace (ie. IGT) to have them precleared. The bonus here is that we also won't needlessly leak whatever was previously in VRAM, but it also probably wasn't sensitive if it was going through this API. Signed-off-by:
-
kbuild test robot authored
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:405:2-3: Unneeded semicolon drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:435:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci CC: xinhui pan <xinhui.pan@amd.com> Signed-off-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
-
xinhui pan authored
add ras post init function. Do some initialization after all IP have finished their late init. Add new member flags which will control the ras work flow. For now, vbios enable ras for us on boot. That might change in the future. So there should be a flag from vbios to tell us if ras is enabled or not on boot. Looks like there is no such info now. Other bits of the flags are reserved to control other parts of ras. Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
Evan Quan <evan.quan@amd.com> Signed-off-by:
-
xinhui pan authored
add drm info output if ras initialized successfully. add ras atomfirmware sanity check. Signed-off-by:
-
xinhui pan authored
lockdep need a static key. Previously we set ignore bit to avoid the warning. Now call sysfs_attr_init to initialize the static key. Signed-off-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
xinhui pan authored
Unzero char is accepted by sscanf, so when data is structure but unexpectedly return error invalid; Signed-off-by:
Feifei Xu <Feifei.Xu@amd.com> Signed-off-by:
-
xinhui pan authored
Currently, it is not clear how ras is supported. Both software and hardware can set the supported. That is confusing. Fix it by adding new member hw_supported. Signed-off-by:
-
xinhui pan authored
Set ignore bit to satisfy locpdep. Signed-off-by:
-
xinhui pan authored
Ta is optional, so check if ta firmware is loaded or not. Signed-off-by:
-
Evan Quan authored
The descriptions of modinfo wrongly show two parameters for each feature(see below). This patch can fix this incorrect outputs. parm: amdgpu_ras_enable:Enable RAS features on the GPU (0 = disable, 1 = enable, -1 = auto (default)) parm: ras_enable:int parm: amdgpu_ras_mask:Mask of RAS features to enable (default 0xffffffff), only valid when ras_enable == 1 parm: ras_mask:uint Signed-off-by:
-
xinhui pan authored
Signed-off-by:
-
