Replace mdelay with usleep_range to avoid busy loop.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Few packets have timestamping enabled. Exit sock_tx_timestamp quickly
in this common case.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

not used anymore since ddecf0f4
(net_sched: sfq: add optional RED on top of SFQ).
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Convert the normal transmit completion path from dev_kfree_skb_any()
to dev_consume_skb_any() to help keep dropped packet profiling
meaningful.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
bonding: get rid of bond->lock

This patch-set removes the last users of bond->lock and converts the places
that needed it for sync to use curr_slave_lock or RCU as appropriate.
I've run this with lockdep and have stress-tested it via loading/unloading
and enslaving/releasing in parallel while outputting bond's proc, I didn't
see any issues. Please pay special attention to the procfs change, I've
done about an hour of stress-testing on it and have checked that the event
that causes the bonding to delete its proc entry (NETDEV_UNREGISTER) is
called before ndo_uninit() and the freeing of the dev so any readers will
sync with that. Also ran sparse checks and there were no splats.

v2: Add patch 0001/cxgb4 bond->lock removal, RTNL should be held in the
    notifier call, the other patches are the same. Also tested with
    allmodconfig to make sure there're no more users of bond->lock.
Changes from the RFC:
 use RCU in procfs instead of RTNL since RTNL might lead to a deadlock with
 unloading and also is much slower. The bond destruction syncs with proc
 via the proc locks. There's one new patch that converts primary_slave to
 use RCU as it was necessary to fix a longstanding bugs in sysfs and
 procfs and to make it easy to migrate bond's procfs to RCU. And of course
 rebased on top of net-next current.

This is the first patch-set in a series that should simplify the bond's
locking requirements and will make it easier to define the locking
conditions necessary for the various paths. The goal is to rely on RTNL
and rcu alone, an extra lock would be needed in a few special cases that
would be documented very well.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The usage of bond->lock in bond_main.c was completely unnecessary as it
didn't help to sync with anything, most of the spots already had RTNL.
Since there're no more users of bond->lock, remove it.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We're safe to remove the bond->lock use from the arp targets because
arp_rcv_probe no longer acquires bond->lock, only rcu_read_lock.
Also setting the primary slave is safe because noone uses the bond->lock
as a syncing mechanism for that anymore.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use RCU to protect against slave release, the proc show function will sync
with the bond destruction by the proc locks and the fact that the bond is
released after NETDEV_UNREGISTER which causes the bonding to remove the
proc entry.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is necessary mainly for two bonding call sites: procfs and
sysfs as it was dereferenced without any real protection.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can remove the lock/unlock as it's no longer necessary since
RTNL should be held while calling bond_alb_set_mac_address().
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In 3ad mode the only syncing needed by bond->lock is for the wq
and the recv handler, so change them to use curr_slave_lock.
There're no locking dependencies here as 3ad doesn't use
curr_slave_lock at all.
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

RTNL should be already held in the notifier call so the slave list can
be traversed without a problem, remove the unnecessary bond->lock.

CC: Hariprasad S <hariprasad@chelsio.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This enables EMAC Rockchip support on radxa rock boards.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds support for EMAC Rockchip driver on RK3188 SoCs.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This adds the necessary binding documentation for the EMAC Rockchip platform
driver found in RK3066 and RK3188 SoCs.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch defines a platform glue layer for Rockchip SoCs which
support arc-emac driver. It ensures that regulator for the rmii is on
before trying to connect to the ethernet controller. It applies right
speed and mode changes to the grf when ethernet settings change.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
BPF updates

[ Set applies on top of current net-next but also on top of
  Alexei's latest patches. Please see individual patches for
  more details. ]

Changelog:
 v1->v2:
  - Removed paragraph in 1st commit message
  - Rest stays the same
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Reported by Mikulas Patocka, kmemcheck currently barks out a
false positive since we don't have special kmemcheck annotation
for bitfields used in bpf_prog structure.

We currently have jited:1, len:31 and thus when accessing len
while CONFIG_KMEMCHECK enabled, kmemcheck throws a warning that
we're reading uninitialized memory.

As we don't need the whole bit universe for pages member, we
can just split it to u16 and use a bool flag for jited instead
of a bitfield.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This is the ARM variant for 314beb9b ("x86: bpf_jit_comp: secure bpf
jit against spraying attacks").

It is now possible to implement it due to commits 75374ad4 ("ARM: mm:
Define set_memory_* functions for ARM") and dca9aa92 ("ARM: add
DEBUG_SET_MODULE_RONX option to Kconfig") which added infrastructure for
this facility.

Thus, this patch makes sure the BPF generated JIT code is marked RO, as
other kernel text sections, and also lets the generated JIT code start
at a pseudo random offset instead on a page boundary. The holes are filled
with illegal instructions.

JIT tested on armv7hl with BPF test suite.

Reference: http://mainisusuallyafunction.blogspot.com/2012/11/attacking-hardened-linux-systems-with.htmlSigned-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Mircea Gherzan <mgherzan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduced in commit 314beb9b ("x86: bpf_jit_comp: secure bpf jit
against spraying attacks") and later on replicated in aa2d2c73
("s390/bpf,jit: address randomize and write protect jit code") for
s390 architecture, write protection for BPF JIT images got added and
a random start address of the JIT code, so that it's not on a page
boundary anymore.

Since both use a very similar allocator for the BPF binary header,
we can consolidate this code into the BPF core as it's mostly JIT
independant anyway.

This will also allow for future archs that support DEBUG_SET_MODULE_RONX
to just reuse instead of reimplementing it.

JIT tested on x86_64 and s390x with BPF test suite.
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Duyck reported high false sharing on dst refcount in tcp stack
when prequeue is used. prequeue is the mechanism used when a thread is
blocked in recvmsg()/read() on a TCP socket, using a blocking model
rather than select()/poll()/epoll() non blocking one.

We already try to use RCU in input path as much as possible, but we were
forced to take a refcount on the dst when skb escaped RCU protected
region. When/if the user thread runs on different cpu, dst_release()
will then touch dst refcount again.

Commit 09316255 (tcp: force a dst refcount when prequeue packet)
was an example of a race fix.

It turns out the only remaining usage of skb->dst for a packet stored
in a TCP socket prequeue is IP early demux.

We can add a logic to detect when IP early demux is probably going
to use skb->dst. Because we do an optimistic check rather than duplicate
existing logic, we need to guard inet_sk_rx_dst_set() and
inet6_sk_rx_dst_set() from using a NULL dst.

Many thanks to Alexander for providing a nice bug report, git bisection,
and reproducer.

Tested using Alexander script on a 40Gb NIC, 8 RX queues.
Hosts have 24 cores, 48 hyper threads.

echo 0 >/proc/sys/net/ipv4/tcp_autocorking

for i in `seq 0 47`
do
  for j in `seq 0 2`
  do
     netperf -H $DEST -t TCP_STREAM -l 1000 \
             -c -C -T $i,$i -P 0 -- \
             -m 64 -s 64K -D &
  done
done

Before patch : ~6Mpps and ~95% cpu usage on receiver
After patch : ~9Mpps and ~35% cpu usage on receiver.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After merging the wireless-next tree, today's linux-next build (powerpc
allyesconfig) failed like this:

drivers/net/wireless/ath/ath5k/debug.c: In function 'open_file_eeprom':
drivers/net/wireless/ath/ath5k/debug.c:933:2: error: implicit declaration of function 'vmalloc' [-Werror=implicit-function-declaration]
  buf = vmalloc(eesize);
  ^
drivers/net/wireless/ath/ath5k/debug.c:933:6: warning: assignment makes pointer from integer without a cast
  buf = vmalloc(eesize);
      ^
drivers/net/wireless/ath/ath5k/debug.c:960:2: error: implicit declaration of function 'vfree' [-Werror=implicit-function-declaration]
  vfree(buf);
  ^

Caused by commit db906eb2 ("ath5k: added debugfs file for dumping
eeprom").  Also reported by Guenter Roeck.

I have used Geert Uytterhoeven's suggested fix of including vmalloc.h
and so added this patch for today:

From: Stephen Rothwell <sfr@canb.auug.org.au>
Date: Mon, 8 Sep 2014 18:39:23 +1000
Subject: [PATCH] ath5k: fix debugfs addition
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

It removes the owner field updation of driver structure.
It will be automatically updated by module_platform_driver()
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the date type of error status from u64 to atomic_long_t, and use atomic
operation, then remove the lock which is used to protect the error status.

The operation of atomic maybe faster than spin lock.

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch removes an unncessary check in the br_afspec() method of
br_netlink.c.
Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
bridge: implement rtnl_link options for getting and setting bridge options

So far, only sysfs is complete interface for getting and setting bridge
options. This patchset follows-up on the similar bonding code and
allows userspace to get/set bridge master/port options using Netlink
IFLA_INFO_DATA/IFLA_INFO_SLAVE_DATA attr.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow rtnetlink users to set bridge master info via IFLA_INFO_DATA attr
This initial part implements forward_delay, hello_time, max_age options.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow rtnetlink users to get bridge master info in IFLA_INFO_DATA attr
This initial part implements forward_delay, hello_time, max_age options.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow rtnetlink users to set port info via IFLA_INFO_SLAVE_DATA attr
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

Allow rtnetlink users to get port info in IFLA_INFO_SLAVE_DATA attr
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

The thing is that netdev_master_upper_dev_link calls
call_netdevice_notifiers(NETDEV_CHANGEUPPER, dev). That generates rtnl
link message and during that, rtnl_link_ops->fill_slave_info is called.
But with current ordering, rx_handler and IFF_BRIDGE_PORT are not set
yet so there would have to be check for that in fill_slave_info callback.

Resolve this by reordering to similar what bonding and team does to
avoid the check.

Also add removal of IFF_BRIDGE_PORT flag into error path.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

net.ipv4.ip_nonlocal_bind sysctl was global to all network
namespaces. This patch allows to set a different value for each
network namespace.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexei Starovoitov says:

====================
load imm64 insn and uapi/linux/bpf.h

V9->V10
- no changes, added Daniel's ack

Note they're on top of Hannes's patch in the same area [1]

V8 thread with 'why' reasoning and end goal [2]

Original set [3] of ~28 patches I'm planning to present in 4 stages:

  I. this 2 patches to fork off llvm upstreaming
 II. bpf syscall with manpage and map implementation
III. bpf program load/unload with verifier testsuite (1st user of
     instruction macros from bpf.h and 1st user of load imm64 insn)
 IV. tracing, etc

[1] http://patchwork.ozlabs.org/patch/385266/
[2] https://lkml.org/lkml/2014/8/27/628
[3] https://lkml.org/lkml/2014/8/26/859
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

allow user space to generate eBPF programs

uapi/linux/bpf.h: eBPF instruction set definition

linux/filter.h: the rest

This patch only moves macro definitions, but practically it freezes existing
eBPF instruction set, though new instructions can still be added in the future.

These eBPF definitions cannot go into uapi/linux/filter.h, since the names
may conflict with existing applications.

Full eBPF ISA description is in Documentation/networking/filter.txt
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

add BPF_LD_IMM64 instruction to load 64-bit immediate value into a register.
All previous instructions were 8-byte. This is first 16-byte instruction.
Two consecutive 'struct bpf_insn' blocks are interpreted as single instruction:
insn[0].code = BPF_LD | BPF_DW | BPF_IMM
insn[0].dst_reg = destination register
insn[0].imm = lower 32-bit
insn[1].code = 0
insn[1].imm = upper 32-bit
All unused fields must be zero.

Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM
which loads 32-bit immediate value into a register.

x64 JITs it as single 'movabsq %rax, imm64'
arm64 may JIT as sequence of four 'movk x0, #imm16, lsl #shift' insn

Note that old eBPF programs are binary compatible with new interpreter.

It helps eBPF programs load 64-bit constant into a register with one
instruction instead of using two registers and 4 instructions:
BPF_MOV32_IMM(R1, imm32)
BPF_ALU64_IMM(BPF_LSH, R1, 32)
BPF_MOV32_IMM(R2, imm32)
BPF_ALU64_REG(BPF_OR, R1, R2)

User space generated programs will use this instruction to load constants only.

To tell kernel that user space needs a pointer the _pseudo_ variant of
this instruction may be added later, which will use extra bits of encoding
to indicate what type of pointer user space is asking kernel to provide.
For example 'off' or 'src_reg' fields can be used for such purpose.
src_reg = 1 could mean that user space is asking kernel to validate and
load in-kernel map pointer.
src_reg = 2 could mean that user space needs readonly data section pointer
src_reg = 3 could mean that user space needs a pointer to per-cpu local data
All such future pseudo instructions will not be carrying the actual pointer
as part of the instruction, but rather will be treated as a request to kernel
to provide one. The kernel will verify the request_for_a_pointer, then
will drop _pseudo_ marking and will store actual internal pointer inside
the instruction, so the end result is the interpreter and JITs never
see pseudo BPF_LD_IMM64 insns and only operate on generic BPF_LD_IMM64 that
loads 64-bit immediate into a register. User space never operates on direct
pointers and verifier can easily recognize request_for_pointer vs other
instructions.
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'master-2014-09-08' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
pull request: wireless-next 2014-09-08

Please pull this batch of updates intended for the 3.18 stream...

For the mac80211 bits, Johannes says:

"Not that much content this time. Some RCU cleanups, crypto
performance improvements, and various patches all over,
rather than listing them one might as well look into the
git log instead."

For the Bluetooth bits, Gustavo says:

"The changes consists of:

        - Coding style fixes to HCI drivers
        - Corrupted ack value fix for the H5 HCI driver
        - A couple of Enhanced L2CAP fixes
        - Conversion of SMP code to use common L2CAP channel API
        - Page scan optimizations when using the kernel-side whitelist
        - Various mac802154 and and ieee802154 6lowpan cleanups
        - One new Atheros USB ID"

For the iwlwifi bits, Emmanuel says:

"We have a new big thing coming up which is called Dynamic Queue
Allocation (or DQA).  This is a completely new way to work with the
Tx queues and it requires major refactoring.  This is being done by
Johannes and Avri.  Besides this, Johannes disables U-APSD by default
because of APs that would disable A-MPDU if the association supports
U-ASPD.  Luca contributed to the power area which he was cleaning
up on the way while working on CSA.  A few more random things here
and there."

For the Atheros bits, Kalle says:

"For ath6kl we had two small fixes and a new SDIO device id.

For ath10k the bigger changes are:

 * support for new firmware version 10.2 (Michal)

 * spectral scan support (Simon, Sven & Mathias)

 * export a firmware crash dump file (Ben & me)

 * cleaning up of pci.c (Michal)

 * print pci id in all messages, which causes most of the churn (Michal)"

Beyond that, we have the usual collection of various updates to ath9k,
b43, mwifiex, and wil6210, as well as a few other bits here and there.

Please let me know if there are problems!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

inetpeer sequence numbers are no longer incremented, so no need to
check and flush the tree. The function that increments the sequence
number was already dead code and removed in in "ipv4: remove unused
function" (068a6e18). Remove the code that checks for a change, too.

Verifying that v4_seq and v6_seq are never incremented and thus that
flush_check compares bp->flush_seq to 0 is trivial.

The second part of the change removes flush_check completely even
though bp->flush_seq is exactly !0 once, at initialization. This
change is correct because the time this branch is true is when
bp->root == peer_avl_empty_rcu, in which the branch and
inetpeer_invalidate_tree are a NOOP.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

CPSW supports both rx and tx pause frames for flow control.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

A bit of floor sweeping in a dusty old corner.  Convert the "normal"
skb free calls to dev_consume_skb_any() so packet drop tracing will
be more sane.
Signed-off-by: Rick Jones <rick.jones2@hp.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

GRE assumes that the GRE header is at skb_network_header +
ip_hrdlen(skb). It is more general to use skb_transport_header
and this allows the possbility of inserting additional header
between IP and GRE (which is what we will done in Generic UDP
Encapsulation for GRE).
Signed-off-by: Tom Herbert <therbert@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>